Preview only show first 10 pages with watermark. For full document please download

All In One双轨無品名说明书-english.cdr

Rating
Date

September 2018
Size

651.5KB
Views

7,017
Categories

Computers & electronics Data input devices KVM switches

Transcript

User's Manual 1u LCD Console User Manual PACKING LIST CONTENTS: □ SINGLE PORT PS/2 LCD KVM DRAWER * 1u 17" /19" Rack-mount Console * 6ft KVM Cable/Optional * Back rail for 17.72"(450mm )~ 31.50"(800mm) mounting range * Power cord * Philips screws : 1 pcs : 1 pcs : 2 pcs : 1 set : 8 pcs Please check to ensure that the unit is not damaged. Report any damages immediately to your dealer/shipper. Please read the manual thoroughly and follow the installation and operation procedures carefully to prevent any damages to the console unit, and/or any devices connected to it. I-1 1u LCD Console User Manual PACKING LIST CONTENTS: □ 8PORT USB/COMBO LCD KVM DRAWER * 1u 17"/19" Rack-mount Console * 6ft KVM Cable/Optional * Back rail for 17.72"(450mm )~ 31.50"(800mm) mounting range * Power cord * Philips screws : 1 pcs : 8 pcs : 2 pcs : 1 set : 8 pcs Please check to ensure that the unit is not damaged. Report any damages immediately to your dealer/shipper. Please read the manual thoroughly and follow the installation and operation procedures carefully to prevent any damages to the console unit, and/or any devices connected to it. I-2 1u LCD Console User Manual PACKING LIST CONTENTS: □ 1 6PORT USB/COMBO LCD KVM DRAWER * 1u 17"/19" Rack-mount Console * 6ft KVM Cable /Optional * Back rail for 17.72"(450mm )~ 31.50"(800mm) mounting range * Power cord * Philips screws : 1 pcs :16pcs : 2 pcs : 1 set : 8 pcs Please check to ensure that the unit is not damaged. Report any damages immediately to your dealer/shipper. Please read the manual thoroughly and follow the installation and operation procedures carefully to prevent any damages to the console unit, and/or any devices connected to it. I-3 1u LCD Console User Manual SAFETY INSTRUCTIONS 1. Please read the manual before installing and operating the console unit. 2. Please store the user manual in a safe and easily accessible place. 3. Please power down and unplug the console before performing any cleaning. 4. No liquid detergent can be applied directly. Use a moist cloth for this purpose. 5. The unit must be kept in a cool and dry place. 6. Do not keep the unit in an environment above 140 degree F. 7. Dropping the unit will cause irreversible damage and/or cause injuries. 8. Do not block any ventilation holes as the unit will overheat and malfunction. 9. Make sure that the power rating of the outlet matches the unit's. 10. Plug the unit to a UPS or surge protector to avoid damage thru electrical surges. 11. If in any situation the unit is not used for a long period of time, it is advisable to power Down and unplug the unit for safety purposes. 12. Place the power in a safe spot to prevent tripping or stepped on. 13. Do not open the unit for any reasons, unless it is done by a qualified technician. 14. Do not pour liquid onto the unit as this can cause a fire or electric shock. 15. All cautions and warnings on the unit must be noted and followed. 16. Before the unit can be use again following any damages to it, a qualified technician Must test and certify the usability and safety of the unit first. II 1u LCD Console User Manual INDEXES PACKING LIST …….…………………………………………………….................…………...................I-1 PACKING LIST …….…………………………………………………….................…………….......................I-2 PACKING LIST …….…………………………………………………….................…………….......................I-3 SAFETY INSTRUCTIONS………………………………………………………………………..................II INDEXES……………………………………………………………………………………………..................III SECTION 1 General Information… … … … … … … … … … … … … … … … … … … … … … … … . . . . . . . . . . . . . . . 1 1.1 Overview … … … … … … … … … … … … … … … … … … … … . . …………………...................1 1.2 Product Specification …………………………………… … … … . . … … . . . . . . . . . . . . . . . . . ........2 SECTION 2 Panel Controls and OSD Functions………………………………………………....................8 2.1 Colour … … … … … … … … … … … … … … … … … … … … … … … … ……...........................14 2.2 Picture ………………………………………………………………… … . … . . .................... .16 2.3 Function …………………………………………………………………… … . . …..................18 2.4 OSD Menu ……………………………………………………………………………....….......... 19 2.5 Misc ………………………………………………………………………...…. . . ......................20 2.6 Exit ……………………………………………………………………...….....................……..20 2.7 Power Indicator (LED light)………………………………………………………………..…...20 SECTION 3 KVM Control and OSD fuction……………………………………………….................. .......21 I FUNCTION …………………………………………………………………….......................... ..21 II OPERATION …………………………………………………………………….…....................... 2 1 1.Front Panel Push Buttons………………………………………………….…........................21 2.Hot-key Commands……………………….................................................................. 21 3.Using numerical key to select PC………………………...................................................22 4.Press key to activate the AUTO SCAN function…………………............................23 5. key SELECT PC function…………………………….............................................24 6. key SEARCH PC function…………………………………………............................ 26 7. key EDIT PC NAME function……………………………………..............................28 8. key MORE SYSTEM function…………………………………….............................28 9. key EDIT UNIT/PC PSW……………………………………....................................29 10.Enable Password………………………..................................................................... 30 11. enter OSD position adjustable function……………………………....................... 31 12. to enter the screen display HELP……………................................................... 32 SECTION 4 INSTALLATION ……………………………………………………………….…..................... 32 4.1 Preparation for installing the Console into the Cabinet…………………........................32 4.2 Hardware Kit Content …………………………………………………………….................32 4.3 Installation for the Console equipped into the Cabinet………………........................33 III 1u LCD Console User Manual CHAPTER 1 GENERAL INFORMATION 1.1 Overview This console is an ideal solution for all network administration environments with multiple servers and platforms. The 17-inch TFT LCD color display and low-profile industrial keyboard/touchpad provide the user-friendliest and most reliable environment for all network administrators. All these functions are integrated into a 17-inch 1u space console. Its rugged construction design also provides space saving and high reliability for all industrial network applications. The drawer housing the monitor forms a tough and rugged enclosure that will protect it from all hazards and also permits easy access to the monitor controls. The high quality monitor provides flicker-free color images at the optimal resolutions. It ensures crisp images with clear definitions. This monitor is an autoadjusting and ergonomically designed display. We utilize the latest in active thin film transistor (TFT) technology for all our monitors. This provides crisp images and wider viewing angles. Compared with the conventional CRT, the LCD monitors are not affected by the magnetic fields commonly found in most plant floor or communications centers. They are also brighter, making them ideal for high ambient lighting conditions found in today's factory environments. On-screen menus allow for display adjustments. The monitor's P-N-P features support Windows 95/98, NT and XP, with the universal power supply allows global acceptability. The console's monitor are compatible to most analog RGB (Red, Green, Blue) display standards, including PS/2, optional for Sun Micro System, Apple Macintosh Centris, Quadra and Macintosh II Family signals. The monitor is capable of displaying crisp, vibrant color graphics with VGA, SVGA, XGA ,SXGA, and most Macintosh compatible color video cards. 1 1u LCD Console User Manual 1.2 PRODUCT SPECIFICATIONS Function/Model 17" LCD KVM Drawer Ports PC side connector Console side connector PC selection method 8 16 HD-15M x 8 HD-15M x 16 8P8C x 1; HD-15F x 1, USB A type x 2(K/B & mouse only) 8P8C x 1; HD-15F x 1, USB A type x 2(K/B & mouse only) Hotkey/OSD/Push button Hotkey/OSD/Push button Max.Resolution 1280 x 1024 Operating temperature 0~45℃ Storage temperature -20℃~60℃ EX.Power adaptor Housing Metal N.W(Kg)/carton G.W(Kg)/carton Dimensions(mm) Function/Model Ports 17" LCD KVM Drawer 1 8 16 HD-15M x 1 HD-15M x 8 HD-15M x 16 Console side connector NO DB-9Pin x 1; HD-15F x 1, USB A/Type double x 1 DB-9Pin x 1; HD-15F x 1, USB A/Type double x 1 PC selection method NO Hotkey/OSD/Push button Hotkey/OSD/Push button PC side connector Max.Resolution 1280x 1024 Operating temperature 0~45℃ Storage temperature -20℃~60℃ EX.Power adaptor Housing Metal N.W(Kg)/carton G.W(Kg)/carton Dimensions(mm) 2 1u LCD Console User Manual Function/Model 19" LCD KVM Drawer Ports 8 PC selection method HD-15M x 16 HD-15M x 8 PC side connector Console side connector 16 8P8C x 1; HD-15F x 1, USB A type x 2(K/B & mouse only) 8P8C x 1; HD-15F x 1, USB A type x 2(K/B & mouse only) Hotkey/OSD/Push button Hotkey/OSD/Push button Max.Resolution 1280 x 1024 Operating temperature 0~45℃ Storage temperature -20℃~60℃ EX.Power adaptor Housing Metal N.W(Kg)/carton G.W(Kg)/carton Dimensions(mm) Function/Model Ports PC side connector 19" LCD KVM Drawer 8 1 16 HD-15M x 1 HD-15M x 8 HD-15M x 16 Console side connector NO DB-9Pin x 1; HD-15F x 1, USB A/Type double x 1 DB-9Pin x 1; HD-15F x 1, USB A/Type double x 1 PC selection method NO Hotkey/OSD/Push button Hotkey/OSD/Push button Max.Resolution 1280x 1024 Operating temperature 0~45℃ Storage temperature -20℃~60℃ EX.Power adaptor Housing Metal N.W(Kg)/carton G.W(Kg)/carton Dimensions(mm) 3 1u LCD Console User Manual Single Port PS/2 17" LCD KVM Drawer 136 23 POWER 14.57"(370mm) 1.72"(43.5mm) 24.41"(620mm) 19.02"(483mm) 18.35"(466mm) 1.26"(32.0mm) 24.41"(620mm)～39.17"(800mm) PC Num Caps Scroll Lock Lock Lock 0.08"(2.0mm) 8 Port Combo 17" LCD KVM Drawer 136 23 POWER PC1 PC2 PC3 PC4 PC5 PC6 PC7 PC8 14.57"(370mm) 1.72"(43.5mm) 24.41"(620mm) Exit Status Select Up Down Memu Auto Exit Status Select Up Down Memu Auto 19.02"(483mm) 18.35"(466mm) 1.26"(32.0mm) 24.41"(620mm)～39.17"(800mm) PROGRAM Num Caps Scroll Lock Lock Lock 0.08"(2. 0mm) 16 Port Combo 17" LCD KVM Drawer 136 23 POWER PC2 PC1 PC10 PC9 PC3 PC4 PC5 PC6 PC7 PC8 4 1.72"(43.5mm) PC13 PC14 PC15 PC16 0.08"(2. 0mm) 19.02"(483mm) 18.35"(466mm) 1.26"(32.0mm) PC12 24.41"(620mm) PC11 24.41"(620mm)～39.17"(800mm) 14.57"(370mm) PROGRAM Num Caps Scroll Lock Lock Lock 1u LCD Console User Manual Single Port PS/2 19" LCD KVM Drawer 8 Port Combo 19" LCD KVM Drawer 16 Port Combo 19" LCD KVM Drawer 5 1u LCD Console User Manual 8 Port USB 17" LCD KVM Drawer 16 Port USB 17" LCD KVM Drawer 6 1u LCD Console User Manual 8 Port USB 19" LCD KVM Drawer 16 Port USB 19" LCD KVM Drawer 7 1u LCD Console User Manual SECTION 2 CONTROL PANEL & OSD FUNCTIONS Hotkey Auto-adjustment 50Brightness 50- + Contrast + Auto-adjustment Controls Description Power Power On/Off Button. LED will be lit when on. Status LED indicator for status. Green means power on and signal reciept ; Red means standy, suspend or power off. Select Exit Auto-sync and scale down display to default factory settingsh Up Move cursor up to the function to be adjusted Down Move cursor down to the function to be adjusted Menu To access the main menu and also double as the 'Enter' button Auto Auto-adjustment 8 1u LCD Console User Manual 2.1 Colour ( To adjust the factors such as contrast, brightness, gamma, colour temp and colour adjust) 2.1.1 Contrast I. Press the 'Menu' button to activate the on50+ Colour Contrast screen menu Picture Brightness 50+ 0 1 2 3 Function Gamma II. Use the 'UP' & 'Down' buttons to scroll up or 9300 6500 5800 User OSD Menu Colour Temp down Misc Colour Adjust III. Scroll down to the selection 'Colour' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Contrast' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for contrast adjustment. 2.1.2 Brightness I. Press the 'Menu' button to activate the on50+ Colour Contrast Picture Brightness screen menu 50+ 0 1 2 3 Function Gamma II. Use the 'UP' & 'Down' buttons to scroll up or 9300 6500 5800 User OSD Menu Colour Temp down Misc Colour Adjust III. Scroll down to the selection 'Colour' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Brightness' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for Brightness adjustment. 2.1.3 Gamma I. Press the 'Menu' button to activate the on50+ Colour Contrast screen menu Picture Brightness 50+ 0 1 2 3 Function Gamma II. Use the 'UP' & 'Down' buttons to scroll up or 9300 6500 5800 User OSD Menu Colour Temp down Misc Colour Adjust III. Scroll down to the selection 'Colour' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Gamma' VII. Press the 'Menu' button to confirm the selection and the numbers from 0 to 3 on the right are selectable. VIII. Use the 'UP' & 'Down' buttons to scroll down to the wanted number( selection) and press 'Menu' button to confirm for Gamma adjustment. 9 1u LCD Console User Manual 2.1.4 Colour Temperature I. Press the 'Menu' button to activate the on50+ Colour Contrast screen menu Picture Brightness 50+ II. Use the 'UP' & 'Down' buttons to scroll up or 0 1 2 3 Function Gamma 9300 6500 5800 User down OSD Menu Colour Temp Misc Colour Adjust III. Scroll down to the selection 'Colour' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Colour Temp' VII. Press the 'Menu' button to confirm the selection and There are 4 options on the right, (9300, 6500, 5800 and User) . VIII. Use the 'UP' & 'Down' buttons to scroll down to the wanted selection and press 'Menu' button to confirm for Colour Temperature adjustment. 2.1.5 Colour adjustment I. Press the 'Menu' button to activate the on50+ Colour Contrast screen menu Picture Brightness 50+ 0 1 2 3 Function Gamma II. Use the 'UP' & 'Down' buttons to scroll up or 9300 6500 5800 User OSD Menu Colour Temp down Misc Colour Adjust III. Scroll down to the selection 'Colour' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or 50+ Colour Red down 50+ Picture Green VI. Scroll down to the selection 'Colour Adjust' 50+ Function Blue VII. Press the 'Menu' button to confirm the OSD Menu Exit Misc selection and the OSD will switch to another Exit display mode with 4 options on the right( Red, Green, Blue colours with scale and Exit.) . VIII. Use the 'UP' & 'Down' buttons to scroll down to the wanted colour and press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for Colour adjustment. IX. To leave this selection (Colour Adjust), use the 'UP' & 'Down' buttons to scroll up or down to 'Exit' 2.1.6 Exit from “ Colour” selection I. To leave this selection, use the 'UP' & 'Down' buttons to scroll up or down to 'Exit' II. Press the 'Menu' button to confirm the selection and move back to the options on the left. 10 Colour Contrast 50- Picture Brightness 50- Function Gamma 0 OSD Menu Colour Temp 9300 Misc Colour Adjust Exit Exit + + 1 2 6500 3 5800 User 1u LCD Console User Manual 2.2 Picture ( To adjust the factors such as Horizontal position, Vertical position, clock and sharpness) 2.2.1 Horizontal position 50+ Colour H.Position I. Press the 'Menu' button to activate the on50+ Picture V.Position screen menu Function Phase 50+ II. Use the 'UP' & 'Down' buttons to scroll up or OSD Menu Clock 50+ Misc Sharpness 1 2 3 4 5 down Exit Exit III. Scroll down to the selection 'Picture' IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'H.Position' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. 2.2.2 Vertical position I. Press the 'Menu' button to activate the on50+ Colour H.Position screen menu 50+ Picture V.Position II. Use the 'UP' & 'Down' buttons to scroll up or Function Phase 50+ OSD Menu Clock 50+ down Misc Sharpness 1 2 3 4 5 III. Scroll down to the selection 'Picture' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'V.Position' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for Vertical position adjustment. 2.2.3 Phase I. Press the 'Menu' button to activate the on50+ Colour H.Position screen menu 50+ Picture V.Position II. Use the 'UP' & 'Down' buttons to scroll up or Function Phase 50+ down OSD Menu Clock 50+ Misc Sharpness 1 2 3 4 5 III. Scroll down to the selection 'Picture' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Phase' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for Phase adjustment. 11 1u LCD Console User Manual 2.2.4 Clock I. Press the 'Menu' button to activate the on50+ Colour H.Position screen menu 50+ Picture V.Position II. Use the 'UP' & 'Down' buttons to scroll up or Function Phase 50+ OSD Menu Clock 50+ down Misc Sharpness 1 2 3 4 5 III. Scroll down to the selection 'Picture' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Clock' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for Clock adjustment. 2.2.5 Sharpness I. Press the 'Menu' button to activate the on50+ Colour H.Position screen menu 50+ Picture V.Position Function Phase II. Use the 'UP' & 'Down' buttons to scroll up or 50+ OSD Menu Clock 50+ down Misc Sharpness 1 2 3 4 5 III. Scroll down to the selection 'Picture' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Sharpness' VII. Press the 'Menu' button to confirm the selection and the numbers from 1 to 5 on the right are selectable. VIII. Use the 'UP' & 'Down' buttons to scroll down to the wanted number( selection) and press 2.2.6 Exit from “ Picture” selection I. To leave this selection, use the 'UP' & 'Down' buttons to scroll up or down to 'Exit' II. Press the 'Menu' button to confirm the selection and move back to the options on the left. 12 Colour H.Position 50- + Picture V.Position 50- + Function Phase 50- + OSD Menu Clock 50- Misc Sharpness 1 Exit Exit + 2 3 4 5 1u LCD Console User Manual 2.3 Function ( To adjust the factors like Auto colour & Auto adjustment) 2.3.1 Auto Colour I. Press the 'Menu' button to activate the onYES NO Colour Auto Colour screen menu Picture Auto Adjust YES NO Function Exit II. Use the 'UP' & 'Down' buttons to scroll up or OSD Menu down Misc III. Scroll down to the selection 'Function' Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Auto Colour’ VII. Press the 'Menu' button to confirm the selection and There are 2 options on the right (YES and NO). VIII. Use the 'UP' & 'Down' buttons to the wanted selection and press 'Menu' button to confirm. “ NO” to turn off the auto colour function and “ YES” to turn on the auto colour function. 2.3.2 Auto Adjust I. Press the 'Menu' button to activate the onYES NO Colour Auto Colour screen menu Picture Auto Adjust YES NO II. Use the 'UP' & 'Down' buttons to scroll up or Function Exit OSD Menu down Misc III. Scroll down to the selection 'Function' Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Auto Adjust’ VII. Press the 'Menu' button to confirm the selection and There are 2 options on the right (YES and NO). VIII. Use the 'UP' & 'Down' buttons to the wanted selection and press 'Menu' button to confirm. “ NO” to turn off the auto adjustment function and “ YES” to turn on the auto adjustment 2.3.3 Exit from “ Function” selection I. To leave this selection, use the 'UP' & 'Down' buttons to scroll up or down to 'Exit' II. Press the 'Menu' button to confirm the selection and move back to the options on the left. Colour Auto Colour YES NO Picture Auto Adjust YES NO Function Exit OSD Menu Misc Exit 13 1u LCD Console User Manual 2.4 OSD Menu ( To adjust the factors such as Language, OSD Height Position, OSD Vertical Position, OSD Timer and OSD Translucent.) 2.4.1 Language Colour Language I. Press the 'Menu' button to activate the on50+ Picture OSD H.POS screen menu 50+ Function OSD V.POS II. Use the 'UP' & 'Down' buttons to scroll up or NO OFF OSD Menu OSD Timer down Misc Translucent 50+ III. Scroll down to the selection 'OSD Menu' Exit Exit IV. Press the 'Menu' button to confirm the selection. Colour English Italiano V. Use the 'UP' & 'Down' buttons to scroll up or 繁中文 Picture Francais , down 简体中文 Function Dautsch VI. Scroll down to the selection 'Language' 日本语 OSD Menu Espanol ~ VII. Press the 'Menu' button to confirm the Misc selection and the OSD will switch to another Exit display mode with 8 options of languages on the right( Including English, Franch, Deutsch, Spanish, Italian, Traditional Chinese, Simplified Chinese and Japanese) . VIII. Use the 'UP' & 'Down' buttons to scroll down to the wanted language and press the 'Menu' button to confirm the selection. 2.4.2 OSD Height Position I. Press the 'Menu' button to activate the onColour Language screen menu 50+ Picture OSD H.POS II. Use the 'UP' & 'Down' buttons to scroll up or 50+ Function OSD V.POS down NO OFF OSD Menu OSD Timer Misc Translucent 50+ III. Scroll down to the selection 'OSD Menu' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'OSD H.Pos' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for OSD Height Position adjustment. 2.4.3 OSD Vertical Position I. Press the 'Menu' button to activate the onColour Language screen menu 50+ Picture OSD H.POS II. Use the 'UP' & 'Down' buttons to scroll up or 50+ Function OSD V.POS down NO OFF OSD Menu OSD Timer III. Scroll down to the selection 'OSD Menu' Misc Translucent 50+ Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'OSD V.Pos' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. VIII. Use the 'UP' & 'Down' buttons to change the number for OSD Vertical Position adjustment. 14 1u LCD Console User Manual 2.4.4 OSD Timer I. Press the 'Menu' button to activate the onColour Language screen menu 50+ Picture OSD H.POS II. Use the 'UP' & 'Down' buttons to scroll up or 50+ Function OSD V.POS NO OFF OSD Menu OSD Timer down Misc Translucent 50+ III. Scroll down to the selection 'OSD Menu' Exit Exit IV. Press the 'Menu' button to confirm the selection. Colour Language V. Use the 'UP' & 'Down' buttons to scroll up or 50+ Picture OSD H.POS down 50+ Function OSD V.POS VI. Scroll down to the selection 'OSD Timer' 50+ OSD Menu OSD Timer Misc Translucent 50+ VII. Press the 'Menu' button to confirm the Exit Exit selection and There are 2 options on the right (ON & OFF). . VIII. Use the 'UP' & 'Down' buttons to the wanted selection and press 'Menu' button to confirm. “ ON” to turn on the OSD Timer function and “ OFF” to turn off the OSD Timer function VII. Turn on the OSD Timer function and a scale would show up. Use the 'UP' & 'Down' buttons to change the number for OSD Timer adjustment. The unit is in second. 2.4.5 OSD Translucent I. Press the 'Menu' button to activate the onColour Language screen menu 50+ Picture OSD H.POS II. Use the 'UP' & 'Down' buttons to scroll up or 50+ Function OSD V.POS NO OFF OSD Menu OSD Timer down Misc Translucent 50+ III. Scroll down to the selection 'OSD Menu' Exit Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Translucent' VII. Press the 'Menu' button to confirm the selection and the number of scale on the right will turn red from black. 2.4.6 Exit from “ OSD Menu” selection I. To leave this selection, use the 'UP' & 'Down' buttons to scroll up or down to 'Exit' II. Press the 'Menu' button to confirm the selection and move back to the options on the left. 15 Colour Language Picture OSD H.POS 50- Function OSD V.POS 50- OSD Menu OSD Timer NO Misc Translucent 50- Exit Exit + + OFF + 1u LCD Console User Manual 2.5 Misc ( To adjust the factors of Mode Select and reset function.) 2.5.1 Mode Select I. Press the 'Menu' button to activate the onColour Mode Select 640×4 0 0 7 2 0×4 0 0 screen menu Picture Reset YES NO II. Use the 'UP' & 'Down' buttons to scroll up or Function Exit OSD Menu down Misc III. Scroll down to the selection 'Misc' Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Mode Select’ VII. Press the 'Menu' button to confirm the selection and The 2 options, 640x 400 and 720x400 are selectable. VIII. Use the 'UP' & 'Down' buttons to scroll down to the wanted selection and press 'Menu' button to confirm for Mode Select adjustment. 2.5.2 Reset I. Press the 'Menu' button to activate the onColour Mode Select 640×4 0 0 7 2 0×4 0 0 screen menu Picture Reset YES NO Function Exit II. Use the 'UP' & 'Down' buttons to scroll up or OSD Menu down Misc III. Scroll down to the selection 'Misc' Exit IV. Press the 'Menu' button to confirm the selection. V. Use the 'UP' & 'Down' buttons to scroll up or down VI. Scroll down to the selection 'Reset' VII. Press the 'Menu' button to confirm the selection and There are 2 options on the right (YES and NO). VIII. Use the 'UP' & 'Down' buttons to the wanted selection and press 'Menu' button to confirm. “ NO” is no any effects or changes on current operation. “ YES” to turn back to default setting. 2.5.3 Exit from “ Misc” selection I. To leave this selection, use the 'UP' & 'Down' buttons to scroll up or down to 'Exit' II. Press the 'Menu' button to confirm the selection and move back to the options on the left. Colour Mode Select 640×4 0 0 Picture Reset YES Function Exit OSD Menu Misc Exit 16 NO 7 2 0×4 0 0 1u LCD Console User Manual 2.6 Exit ( To exit ouit of the main Menu) Colour Select the 'Exit' button and press ' Menu' to exit the OSD Menu Picture Function OSD Menu Misc Exit 2.7 Power Indicator( LED light ) I. Green ON II. Red Standby III. Red Suspend IV. Red Off 17 1u LCD Console User Manual SECTION 3 KVM Control and OSD fuction I. FUNCTION 1. This operation manual is adapted to Auto Multi-PCs Controller which are available with OSD (ON SCREEN DISPLAY) support. This series of model can be connected as a first level of a MASTER unit in cascade configuration. 2. When multi models are cascaded, the one which has a mouse, a keyboard and a monitor connected to its Console port directly and operated by a user called “MASTER”; other cascaded models are called “SLAVE”. The console side of each SLAVE has to be connected to the PC side of MASTER. 3. For these models with built-in OSD (ON SCREEN DISPLAY) control, user can easily be aware of the system status and operations through on screen menu. 4. These series of models can set up individual PC name and search the PC by name. 5. Password setup and management are available. If the password is built, you must input the correct password to access the target PC. 6. AUTO SCAN function is available, Scan time interval is adjustable. II. OPERATION 1. Front Panel Push Buttons A. Selecting the PC by pressing the front panel push button directly. B. The Auto Scan button of SLAVE will be disable when in cascade configuration. 2. Hot-key Commands A. HOT-KEY can be set as key (original design) or (LEFT CTRL) Key. B. Press HOT-KEY twice (Within 3 seconds) (Remark: Press HOT-KEY only one time when password is accepted), then into the HOT-KEY MAIN MENU mode. C. When on MAIN MENU screen, the OSD display is shown as Figure(1): Figure(1) The currently in Use PC is connected to the Port 7 of SLAVE and this SLAVE is cascaded to the MASTER ＰＣ：３＋７ＭＡＩＮＭＥＮＵ ── ── ── ── ── ── ── ── ── ── ── ─ Ｆ１ＡＵＴＯ．ＳＣＡＮＭＯＤＥＦ２ＳＥＬＥＣＴＰＣＦ３ＳＥＡＲＣＨＰＣＮＡＭＥＦ４ＥＤＩＴＰＣＮＡＭＥＦ５ＭＯＲＥＳＹＳＴＥＭＦ６ＥＤＩＴＵＮＩＴ／ＰＣＰＳＷ．Ｆ７ＯＳＤＰＯＳＩＴＩＯＮＦ８ＨＥＬＰＰＲＥＳＳＥＳＣＴＯＥＸＩＴ 18 1u LCD Console User Manual . D. Line one shows PC:3+7 which indicates that the currently in use PC is connected to the port 7 of SLAVE and this SLAVE is cascaded to the MASTER port 3. E. Under this screen mode, user can press button, , , , , for Activating its function and can also press number key (0-9) to select PC. F. While activating the HOT-KEY commands, MOUSE will be disable temporarily, KEYBOARD can only control the OSD screen but CANNOT control the selected PC G. Press to exit the MAIN MENU screen and return to the PC operation, the MOUSE and KEYBOARD can then work normally. 3. Using numerical key to select PC A. Press the numerical key once and the screen sill show as Figure(2), then press 0-9 to select PC. B. The port number which is connected to the MASTER should be input first and following press <+> and then press the port number of the SLAVE which is connected to the Selected PC. C. Hit to confirm. You can access the selected PC immediately if it is powered on. D. If the selected PC has not been powered on, OSD shows “DISABLE”. E. If selected wrong PC number, OSD displays “ERROR”. Figure(2) SELECT PC:? 4.Presskey to activate the AUTO SCAN function A. In MAIN MENU,hittingkey is to indicate to enter into AUTO SCAN function ,OSD Will display as Figure(3). Figure(3) ＡＵＴＯＳＣＡＮＰＣ：３＋９１２３４５６７８ PC o f M ASTR PC of S LAVE PC N AME B. The port number which is connected to the MASTER should be input first and following press <+> and then press the port number of the SLAVE which is connected to the Selected PC. C. Hit to confirm. You can access the selected PC immediately if it is powered on. D. If the selected PC has not been powered on, OSD shows “DISABLE”. E. If selected wrong PC number, OSD displays “ERROR”. Table(1) Sec. 5 10 15 20 25 30 NUM LOCK OFF ON ON OFF OFF ON CAPS LOCK OFF OFF OFF ON ON ON 19 SCROLL LOCK ON OFF ON OFF ON OFF 1u LCD Console User Manual F. Under AUTO SCAN mode, hitting<→> key is to select the nest powered-on PC. G. Under AUTO SCAN mode, hitting<←> key is to select the previous powered-on PC. H. Exit Auto SCAN mode: Press key to exit the AUTO SCAN and return to the selected PC and also enter into the MENU mode operation, and the MOUSE and KEYBOARD then work normally. 5. key SELECT PC function A. Under MAIN MENU mode, hit key to enter the select PC function, the screen displays as Figure(4). B. Under the mode, use <↓> or <↑> key to move the cursor ☞(CURSOR), use to Confirm the PC selection. C. Under OSD display: right side (STU) field shows the selected PC status: + :selected PC is POWER ON; + 8:selected PC is daisy-chained to 8 port model series which have MASTER / SLAVE Configuration. D. Line one shows PC: 3+7 which indicates that the selected PC is Port 7 of SLAVE and This SLAVE is daisy-chained to MASTER port 3. (Figure(4)) Figure(4) ＰＣ：３＋７ＰＯＲＴＳＥＬＥＣＴＭＥＮＵＳＴＵ ───────────────────────  １ＰＣ１－１１１１２ＰＣ２－２２２２３ＳＬＡＶＥＲ－３４ＰＣ４－４５ＰＣ５－５５５５６ＰＣ６７ＳＬＡＶＥＲ－７８ＰＣ８ + +８ + +８ PC POWER OFF PC PO WE R ON PC side is connected to SLAVE of 8port ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ E. If cursor☞ selects the PC which is remarked with “⊕ò” means that the PC is daisyChained to the SLAVE. Hit or <→> to enter into the cascaded SLAVE. OSD shows the selected daisy-chained PC information (see Figure(5)). On the right side of Line 1 of Figure(5) shows “SLAVER:??” to identity the on screen information is from?? Port of SALVER. 20 1u LCD Console User Manual ＰＣ：３＋７ＳＬＡＶＥＲ：３ＰＯＲＴＳＥＬＥＣＴＭＥＮＵＳＴＵ ── ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ──────────  １Ｓ３－ＰＣ１１１２Ｓ３－ＰＣ２２２３ＥＭＡＩＬ－１４ＳＭＰＴ－３５Ｓ３－ＰＣ５５５６Ｓ３－ＰＣ６７Ｓ３－ＰＣ７８Ｓ３－ＰＣ８ + + Presents the OSD screen information is from SLAVE 3 + + ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ F. Shown SLAVE PC information as Figure(5), press <←> to return to the MASTER PC (Shown as Figure(4)). G. Press key to come back to MAIN MENU (Shown Figure(1)). 6. key SEARCH PC function A. On MAIN MENU screen mode, press to enter into PC NAME input mode to search For the target PC, OSD message shown as FIGURE(6). FIGURE(6) SEARCH NAME : ? B. Input at most 16 characters ( , numerical <0~9> and <-> etc) and press as confirmation. For example: input and hit to start searching the target PC . When targeted PC is found, it will switch to the PC autocratically. C. If no PC NAME is matched, the OSD will display “ERROR” message (shown as Figure(7)). FIGURE(7) ERROR SEARCH NAME : PC12345 D. If the searched PC is powered off, the OSD will display “DISABLE” message (shown as Figure(8)). Figure(8) DISABLE PC : 12 + 5 – PC12345 21 1u LCD Console User Manual 7. key EDIT PC NAME function A. Under MAIN MENU mode: hit key to enter the edit PC name operation (shown as Figure(9)), on the Line 1 of Figure(9) show PC : 2 indicating the current screen Information is from the second PC. Figure(9) ＰＣ：２ＰＯＲＴＮＡＭＥＥＤＩＴＳＴＵ ──────── ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─  １ＰＣ１－１１１１２ＰＣ２－２２２２３ＳＬＡＶＥＲ－３４ＰＣ４－４５ＰＣ５－５５５５６ＰＣ６７ＳＬＡＶＥＲ－７８ＰＣ８ + +８ + +８ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ B. Under OSD mode: on the right side of (STU) field show the status of PC: + : PC is POWER ON; + 8: PC is daisy-chained to 8 port model series which have MASTER / SLAVE Configuration. C. use <↓> or <↑> key to move the cursor ☞(CURSOR), hit to enter the edit PC name operation (shown as Figure(10)). D. In Figure(10) the cursor☞ indicates to edit the name of PC2. the cursor becomes the icon■ prompt to indicate the location you are editing. Input at most 16 characters (, numerical <0~9> and <-> etc) and press as confirmation. E. Edit SLAVE PC name: use <↓>, <↑>, , to select the PC of SLAVE. Then press <→> to select the daisy-chained SLAVE PC, the OSD screen shows as Figure (11): the right side of Line 1 shows “SLAVER:3” indicating the current screen Display is from ?? SLAVE. 22 1u LCD Console User Manual ＰＣ：２ＰＯＲＴＮＡＭＥＥＤＩＴＳＴＵ ─────── ──────────────── １ＰＣ１－１１１１  ２  ３ＳＬＡＶＥＲ－３４ＰＣ４－４５ＰＣ５－５５５５６ＰＣ６７ＳＬＡＶＥＲ－７８ＰＣ８ + +８ + +８ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ Figure(10) ＰＣ：２ＳＬＡＶＥＲ：３ＰＯＲＴＮＡＭＥＥＤＩＴＳＴＵ ───────────────────────  １Ｓ３－ＰＣ１１１２Ｓ３－ＰＣ２２２３ＥＭＡＩＬ－１４ＳＭＰＴ－３５Ｓ３－ＰＣ５５５６Ｓ３－ＰＣ６７Ｓ３－ＰＣ７８Ｓ３－ＰＣ８ + + + + ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ Figure(11) F. Figure (11) shows the selected SLAVE PC information; hit <←> key to return to the MASTER PC mode (shown as Figure(9)). G. Hit to back to the MAIN MENU mode (shown as Figure (1)). 23 1u LCD Console User Manual 8. key MORE SYSTEM function A. Under MAIN MENU mode: hit key to enter the MASTER PC setting operations. You Can hit <↓> or <↑> or <←> or <→> key to setup these parameters.(shown as Figure (12)) B. Hit <↓> or <↑> key to move cursor and select item. C. Hit <←> or <→> key to change the setting. D. Hit to go back to the MAIN MENU (Figure (1)) shown as follow: Figure (12) ＰＣ：３＋７ＭＯＲＥＳＹＳＴＥＭ ───────────────────────  ＰＯＷＥＲＯＮＳＣＡＮＯＦＦＳＣＡＮＴＩＭＥ５ＳＥＣＨＯＴ－ＫＥＹＳＣＲＯＬＬＢＵＺＺＥＲＯＮＢＡＣＫＧＲＯＵＮＤＣＯＬＯＲＯＮ ↓ ↑ ＦＯＲＳＥＬＥＣＴ ? ? ＦＯＲＳＥＴＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ E. POWER ON SCAN setup: a. OFF after resetting the MASTER PC, POWER ON SCAN will search and switch to the PC which is power on directly. b. ON After resetting MASTER PC, POWER ON SCAN will activate the AUTO SCAN Function, the operation step is same as above step 4. F. SCAN TIME setup: Same as {4-E}Table(1). G. HOT-KEY setup: Two choices - and . H. BUZZER setup: a. OFF BUZZER is DISABLE while hitting HOT-KEY and front panel push button. b. ON BUZZER is ENABLE while hitting HOT-KEY and front panel push button. I. BACKGROUND COLOR setup: a. OFF No background color b. ON the background color is light -blue 24 1u LCD Console User Manual 9. key EDIT UNIT/PC PSW A. Password setting: MASTER Password and PC side Password. a. MASTER Password: Controlling and Editing the MASTER password. When user enters the HOT-KEY mode, hit to edit password. OSD will ask for the correct password of MASTER (shown as Figure(13)). After entering the correct password, user Are allowed to use the device. Figure(13) ＵＮＩＴＰＳＷ．：？ b. PC Password: Controlling the operation of PC side. User will be asked for the password, only when the password id entered correctly will the user be allowed to use this PC. OSD screen shown as Figure (16). B. Under MAIN MENU mode: hit key for password editing and if the MASTER password function has been already set, the OSD will ask for entering the password of MASTER (as Figure(13)). Only when the password is entered correctly will the user be Allowed to use this device, OSD Shown as Figure(14). Figure(14) ＰＣ：２ＥＤＩＴＵＮＩＴＯＲＰＯＲＴ ───────────────────────  １ＥＤＩＴＵＮＩＴＰＳＷ．２ＥＤＩＴＰＣＰＯＲＴＰＳＷ．ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ C. Under MAIN MENU mode: hit key for password editing. If the password function of MASTER is not set yet (UNIT PSW.) ,you can deit new password directly (OSD screen shown as Figure(14)). D. Enter Editing function shown as Figure(14) a. Editing MASTER password (EDIT UNIT PSW.) b. Editing PC password (EDIT PC PORT PSW.) including editing the PC password of SLAVE. 25 1u LCD Console User Manual E. Select 1 means to EDIT UNIT PSW. : Editing MASTER password, OSD will show as Figure(15), user should type 1-8 characters (valid characters are , <0-9> and <->) as the new password of MASTER and then press as confirmation. User should Keep the new password firmly in mind. Figure(15) ＮＥＷＰＳＷ．：？ F. Select 2 to EDIT PC PORT PSW. : OSD will show as Figure(15). User can use <↓> or <↑> to move ☞(CURSOR) and press to select PC. The procedure of PC password Edition is same as step 6. 10. Enable Password: A. If selected PC has setup the password. OSD will ask for entering the password of the PC, (Shown as Figure (16)). Correct password is required to use the selected PC. Figure(16) ＰＣＰＡＳＳＷＯＲＤ：？ＰＣ：１２＋５－ＰＣ１２３４５ B. When user enter the wrong password, the OSD will show message “ ERROR” (Shown as Figure(17)). User will be asked for re-entering the correct password. Figure(17) ＥＲＲＯＲＰＣ：１２＋５－ＰＣ１２３４５ C. Under Figure (16) mode, user can hit HOT-KEY once to enter HOT-KEY MAIN MENU. Figure(18) ＰＣ：２ＰＯＲＴＰＳＷ．ＥＤＩＴＳＴＵ ────── ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─  １ＰＳＷ１ + +８２ＰＳＷ２３ＰＳＷ３４ＰＳＷ－４５ＰＳＷ－５５５５６ＰＳＷ６７ＰＳＷ７８ＰＳＷ８ + +８ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ 26 1u LCD Console User Manual 11. enter OSD position adjustable function A. There are 2 kinds of OSD screen display adjustable, please refer to Figure(19). One is to adjust MAIN OSD POSITION. The other is to adjust BANNER OSD POSITION. Figure(19) ＰＣ：２ＯＳＤＰＯＳＩＴＩＯＮ ───────────────────────  １ＭＡＩＮＯＳＤＰＯＳＩＴＩＯＮ２ＢＡＮＮＥＲＯＳＤＰＯＳＩＴＩＯＮＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ B. After selecting the choice 1, the screen will enter into MAIN OSD POSITION, please refer to Figure(20).By then, the user can adjust MAIN OSD POSITION by hitting <↓>/<↑>/<←>/<→> key. Figure(20) ＰＣ：２ＭＡＩＮＯＳＤＰＯＳＩＴＩＯＮ ───────────────────────  UP  LEFT TO MOVE R IG H T  DOWN  ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ 27 1u LCD Console User Manual C. When selecting the choice 2, the screen will enter into BANNER OSD POSITION, please refer to Figure(21). By then, the user can adjust BANNER OSD POSITION by hitting <↓>/<↑>/<←>/<→> key. Figure(21)     ：T O M O V E ＰＲＥＳＳＥＳＣＴＯＭＡＩＮＭＥＮＵ D. If the user would like to go back to the original setting position, please press key 12. Hit key to enter the screen display HELP This displays the contact information about the manufacturer. The user can find instant technical support if the user met some usage difficulty. When the text is over one page, the User can hit <↓>/<↑> to select the page needed. 28 1u LCD Console User Manual SECTION 4 INSTALLATION 4.1 Preparation for installing the Console into the Cabinet I. II. III. IV. Make sure that all the accessories are present according to the list. Make sure that the main console unit is not damaged. Make sure that equipment is powered off. For standard rack-mounts, the shorter brackets are required. 4.2 Hardware Kit Content I. B ack rail for 17.42"(450mm)~31.5"(800mm) mounting range. II. Philips screws x 8(For mounting rail to Console unit). 29 1u LCD Console User Manual 4.3 Installation for the Console equipped into the Cabinet I. Well prepare the below items and accessories.（see below pictures） LCD Consle unit Short back rail for 450mm~800mm mounting range. Philips screws 30 1u LCD Console User Manual II. Measure the length of A . See figure 1. III. If the length of A+ 3.5mm is between 450mm~ 800mm, then get the short support ear. If the length of A+ 3.5mm is over 800mm, please use the long support rear for Installation. Figure 1 A IV. Screw the back rail which would be fixed with LCD console unit to the proper Position of the rackrail of the cabinet. See figure 2 Figure 2 31 1u LCD Console User Manual V. Install the LCD console by inserting the guide of the unit( both side of LCD console unit) into the 2 back rails. And push the console to the end of back and screw the front rail to the proper position of the rackrail of the cabinet. See Figure 3 Figure 3 32 1u LCD Console User Manual VI. Finish installation by connecting cables and power cord. See figure 4. Figure 4 33

All In One双轨無品名说明书-english.cdr

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.