Transcript
All in One PC User Manual
T20 / T22 / T23
About This Manual This manual provides information about the hardware features of your all in one PC, organized through the following chapters:
Package Contents
All In One PC
Wired/Wireless keyboard
Wired/Wireless mouse
Manual
DVD Driver (Optional)
Stand Screws & Screwdriver
AC Adaptor
Power cord
All illustrations in this manual are for reference only. Actual product specifications may vary with territories. Visit the Hibertek website: www. hibertek.com for the latest information.
Important Safety Instruction 1. Please read these instructions completely before using the equipment.
2. Keep these instructions in a safe place. Avoiding the wet place or in high temperature.
3. Heed all warnings appeared in this book and follow all instructions.
4. Do not use this equipment near water. To reduce the risk of fire or electric shock, do not expose this apparatus to rain, liquid or moisture. This product is not water proof or oil-proof.
5. Clean the equipment with a soft, dry cloth.
6. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.
7. Do not install it near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
8. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, consult an electrician for replacement of the outlet.
9. Protect the power cord from being tread upon or pinched, particularly at the plug, and the point where if emerges from the equipment. Be sure that the power outlet is located near the equipment so that it is easily accessible.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the equipment. When a cart is used, use carefully when moving the cart/equipment combination to avoid injury from tipping over.
12. Unplug this equipment when it will be unused for long periods of time.
13. Refer all servicing to qualified service personnel. Service is required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.
Getting to Know Your All-in-One PC Front View Refer to the following diagram to identify the components on this side of the system. The front view may differ depending on the model you purchased.
1. Webcam
2. Microphone (Built-in)
The built-in webcam with the built-in
The built-in microphone can be used
microphone allows you to start video
for video conferencing, voice
chats online.
narrations, audio recordings, and multimedia applications.
Rear View
1. Back I/O ports The back I/O interfaces depends on the specification of the motherboard. Actual features and configurations vary by model.
2. Stand The stand allows you to position the system upright.
3. Kensington Lock The Kensington lock is designed to lock the whole system and keep it safe.
Side View
1. USB 2.0 Ports
2. Memory card reader
The universal serial bus port is compatible This All-in-One PC has a built-in memory card with USB devices such as keyboards, reader that supports MMC/SD/SDHC/MS pro mouse devices, cameras, and hard disk cards used in devices like digital cameras, drivers.
MP3 players, mobile phones, and PDAs
3. Monitor switch
4. Brightness up /down
Press to turn off / turn on the screen.
Press to increase / decrease the brightness.
5. Power Switch
6.
The power switch allows you to switch the system ON/OFF.
Optical Disc Drive
Support compact discs (CD) and/or digital video discs (DVD), and may have recordable ( R ) or re-writable (RW) capabilities.
Connect the Adaptor and the Audio Components Adaptor : Plug the adaptor cord into an electrical outlet. Microphone : Plug the microphone cable into the Microphone port (Pink) of your AIO. Headphone / speakers : Insert the speaker cable into the green Line-out jack.
AC Adaptor
Microphone Speaker
Use your All in One PC Positioning your All-in-one PC Placing your All-in-one PC on a flat surface to keep it stable. Tilt the display panel to an angle best for your field of vision. The maximum angle of inclination is from -10 degrees down left to 90 degrees up right.
Connecting the keyboard and mouse wireless keyboard and mouse (Optional)
wired keyboard and mouse
1. Install batteries to the wireless keyboard and mouse. 2. Insert the wireless keyboard and mouse receiver to the USB port on
1. Connect
the
keyboard
and
mouse to the side USB port or back IO port.
the All-in-one PC.
The illustrations are for reference only. Actual appearances of your wired or wireless keyboard and mouse may vary based on the actual package.
Using the card Reader The built-in card reader supports various types of memory cards, such as MMC/SD/SDHC/MS pro. Insert the card with metallic connectors facing towards you. Push gently until the card clicks into plate.
Before removing the memory card, use the configuration utility on the task bar to stop the memory card operation. Failure to do so may result in data loss. Pull the card out from the port.
Using the Optical Disc Drive Inserting a Disc / Removing a Disc Press the eject button on the disc tray. Pull the tray out with the disc label side up, place the disc on the center of the tray and snap into place. Press the eject button on the disc tray. Pull the tray out with your thumb on the center of the tray; pull the disc by its side with your index finger to release.
Do not remove the disc while the computer is still reading or playing it.
Troubleshooting My All-in-one PC does not start Check that the All-in-one PC is connected to an electrical outlet and it is turned on. Check that the power cord and all cables are connected firmly.
When I turn on my computer, the message “Operating system not found” appears or Windows does not start Check if there is a non-bootable CD inside the optical disk drive. If there is a non-bootable CD in the drive, remove the CD then restart the computer. Check boot setting is the BIOS Setup Utility.
My LCD does not display anything Check that the All-in-one PC is connected to an electrical outlet and it is turned on. The All-in-one PC may be in Standby mode. Press any key to activate the display
My computer “locks up” Try restarting the All-in-one PC. On the Windows taskbar, click Start > Turn off Computer > Restart. If your computer locks up while playing a DVD-ROW/CD-ROM, stop the DVD ROM/CD-ROM, and restart the computer by pressing Ctrl+Alt+Delete.
My DVD-ROM drive tray does not open Press the eject button on the DVD-ROM/CD-ROM drive. If the eject button does not work, open the tray by inserting a sharp, pointed object into the hole next to the eject button.
My speakers have no sound
If you have connected an audio cable to the headphone connector, disconnect the cable.
My computer does not shut down It is the best to shut down your computer using the Shut Down command. Using other methods, including those listed here, may result in loss of unsaved data. If the Shut Down command does not work properly, follow these steps: Restart the computer by pressing Ctrl+Alt+Delete. Press the power switch to turn off the power. Unplug the All-in-one PC from the power adapter.
