Preview only show first 10 pages with watermark. For full document please download

All Our Eterna Emergency Exit Signage Comply With

   EMBED


Share

Transcript

PAGE 28 www.eterna-lighting.co.uk EMERGENCY EXIT SIGNAGE GUIDANCE All our Eterna Emergency Exit Signage comply with current Exit Signage Regulations using the Signs Directive format. 4 Our Eterna legends fulfil the legal and technical requirements for exit signs 4 Extensions to existing installations should be made in the same format as originally installed LED Emergency Lighting 4 Up arrow option available for all models For installations requiring ISO 7010 format legends contact our sales team for more information PAGE 29 LED EMERGENCY LIGHTING All our Emergency Lighting products comply with the BS EN 60598-2-22 Emergency Lighting Standard. Extended Warranty Available on application Page 30 Page 30 Page 30 Page 31 Page 32 Page 33 Page 34 Page 34 Page 35 Page 35 Page 35 Page 35 Page 36 Page 36 Page 36 LED Emergency Lighting EternaPro ETERNAPRO 5 YEAR WARRANTY n LED Emergency Battens + High Output Versions n LED 5ft Twin Slimline Emergency Ceiling Fitting n LED Single Or Twin Weatherproof Fittings n LED Colour Selectable Carina Lights n LED Circular Or Square Utility Lights n LED Full, Eyelid Or Grill Aluminium Wall Lights n LED Non Maintained Emergency Downlight n LED Maintained Recessed Emergency Fittings n LED Emergency Hanging Exit Sign Light n LED IP65 Twinspot Emergency Light n LED IP20 Emergency Twinspot Fitting n Emergency Battery Pack For RDL Range & LED Panels n LED Slim Maintained Emergency Exit Box n LED Maintained Emergency Exit Box Sign n LED Maintained / Non Maintained Emergency Bulkheads www.eterna-lighting.co.uk All products in this section have 5 year warranties available PAGE 30 IP20 LED 5FT / 6FT BATTENS + HIGH OUTPUT VERSIONS ALL FITTINGS: White / 4200K / 35,000 hrs / IP20 50mm 60mm 46mm Extended War 73mm Emergency Box EternaPro 5FT (1460mm) 6FT (1730mm) ranty lication Code Available on app Version Wattage 60mm Luminaire Lumens STANDARD OUTPUT LED BATTENS LBAT5FTEM3 5FT 38W 4800 lm LBAT6FTEM3 6FT 48W 6000 lm HIGH OUTPUT LED BATTENS www.eterna-lighting.co.uk Full photometric data available to enable lighting designs. Light output is equivalent or superior to traditional fluorescent battens. LBAT5HOEM3 5FT 65W 7900 lm LBAT6HOEM3 6FT 70W 8600 lm • Pressed steel body and polycarbonate diffuser • LED tray can be removed from the housing for easy installation • 20mm knockout glands at each end for through wiring options • BESA box mounting • Gear tray retaining straps • Push terminal connections • Pre-wired for easy installation • LED glows green in standby mode and super bright white light in the event of a mains failure • Minimum 3 hour functionality in emergency mode • 118 lumens in emergency mode • See PAGE 43 for non emergency versions • M.O.M: 1 / O.P.Q: 6 5FT LED TWIN SLIMLINE EMERGENCY CEILING FITTING White / 50W / 4000K / 5000 lm / 40,000 hrs EternaPro A slim, modern design LED ceiling fitting which offers a more stylish alternative to traditional battens. Where a more aesthetically pleasing fixture is desirable this versatile and elegant light source is suitable for commercial, retail and domestic applications. Emergency module glows green in standby mode Extended Warranty Available on application Bright white glow in emergency mode 127mm • Polycarbonate and aluminium construction • Push terminal connections • Pre-wired for easy installation • Minimum 3 hour functionality in emergency mode • LED glows green in standby mode and super bright white light in the event of a mains failure • 118 lumens in emergency mode • See PAGE 44 for non emergency version • M.O.M: 1 / O.P.Q: 6 1503mm (5ft) 43mm Code ELEGAN5EM3 IP65 LED SINGLE/TWIN 5FT EMERGENCY WEATHERPROOF FITTINGS 95mm LED Emergency Lighting BOTH FITTINGS: Grey / 5000K / 30,000 hrs / IP65 1560mm (5ft) Single: 90mm Twin: 135mm EternaPro Extended Warranty n Available on applicatio Code Version Wattage Luminaire Lumens WPLEDEM351 Single 5ft 30W 3000 lm WPLEDEM352 Twin 5ft 60W 6000 lm Superb one for one replacement for traditional fluorescent fixtures. •P  olycarbonate housing and diffuser •M  ultiple fixing options - supplied with surface mounting brackets and suspension hooks • Gear tray retaining strap for easy installation • IES files available • Stainless steel clips • Push-fit terminal block •3  hour duration maintained operation: facility for non-maintained mode or remote switching • See PAGE 45 for non emergency versions • Single = M.O.M: 1 / O.P.Q: 6 • Twin = M.O.M: 1 / O.P.Q: 4 ALL FITTINGS: 17W / 35,000 hrs / IP65 / A Rated ALL FITTINGS: • Colour temperature selectable - options of 3100K, 4200K & 6400K easily set by a dip switch on the gear tray • Full circular LED array • Polycarbonate construction • IP65, ceiling or wall mounted 325mm • Plug in connector between the terminal block and the gear tray. Terminal block is located on the base, allowing for easy wiring and the gear tray to be removed during installation • See PAGE 21 for non emergency versions • M.O.M: 1 / O.P.Q: 8 EMERGENCY VERSIONS: • 3 hour maintained mode as standard which can also be configured for non maintained operation STANDARD ON/OFF MICROWAVE SENSOR VERSIONS: • Adjustable microwave sensor: with options to adjust 2-50 lux or disable, detection range 10-100% and time 5 secs - 15 mins • The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no compromise to the appearance of the fitting or the room design 6400K • 1300 lm Code Colour STANDARD EMERGENCY CSLEDCREM3 Polished Chrome CSLEDWHEM3 White ON/OFF MICROWAVE SENSOR + EMERGENCY MSCSLCREM3 Polished Chrome MSCSLWHEM3 White 10% STEP DIM (CORRIDOR MODE) MICROWAVE SENSOR + EMERGENCY SDCSLCREM3 Polished Chrome SDCSLWHEM3 White STEP DIM (CORRIDOR MODE) MICROWAVE SENSOR VERSIONS: • Operation at 100% light level after last presence detection, reducing to 10% light output after installer selected time delay • Delay time to 10% operation adjustable:  5 sec  30 sec  1 min  5 min  15 min  30 min • 30~150° detection angle • 12~18m adjustable detection range:  100%  75%  50%  25%  10% • Daylight sensitivity adjustment:  2Lux  5Lux  10Lux  30Lux  50Lux  Photocell Disable • Detection is possible through doors, glass panels and thin walls www.eterna-lighting.co.uk 4200K • 1350 lm 110mm 3100K • 1250 lm PAGE 31 IP65 LED EMERGENCY COLOUR TEMPERATURE SELECTABLE FITTINGS EternaPro Extended War Available on app ranty lication = OFF Standard shown LED Emergency Lighting = ON PAGE 32 IP65 LED EMERGENCY UTILITY FITTINGS WITH OPAL / PRISMATIC DIFFUSER ALL FITTINGS: 18W / 4000K / 35,000 hrs / IP65 / A+ Rated High output, energy saving utility LED wall / ceiling fixtures with standard, emergency & multi-function microwave control versions. Both opal & clear versions are available for either smooth diffused effect or maximum light output. Diffusers are supplied not fitted to bases and fully captive diffuser fixing screws are utilised to save installation time. Multi-function microwave versions provide the best in flexibility & energy saving options. Captive fixing screws Code Diffuser + Lumens Version CIRCULAR FITTINGS CIROPALEM3 Standard Emergency CIROPALMW3 Multi-function MW Sensor + Emergency CIRPRISEM3 Standard Emergency CIRPRISMW3 Multi-function MW Sensor + Emergency Opal 1400 lm Prismatic 1600 lm SQUARE FITTINGS Prismatic circular diffuser SQOPALEM3 Standard Emergency SQOPALMW3 Multi-function MW Sensor + Emergency SQPRISEM3 Standard Emergency SQPRISMW3 Multi-function MW Sensor + Emergency Opal 1400 lm Prismatic 1600 lm Opal square diffuser www.eterna-lighting.co.uk Multi-function MW Sensor FULL CIRCULAR / SQUARE LED ARRAY CIR: Ø 290mm SQU: 250mm Push fit terminal block 100mm • Hinged gear tray • Captive fixing screws • Four 20mm cable entries on the side and one to the rear • See PAGE 22 for non emergency versions o EternaPr Opal circle Opal square Extended Available EMERGENCY VERSIONS: • 3 hour maintained mode as standard which can also be configured for non maintained operation MULTI-FUNCTION MICROWAVE SENSOR VERSIONS: • Detection sensitivity adjustable - 10/50/75/100% • Daylight sensor adjustable - 5/15/50 Lux/Disable • Mounting height - maximum 6mtr • Detection zone - maximum 16mtr diameter x 6mtr height • Detection angle - 150° (wall mounted), 360° (ceiling mounted) Warranty tion on applica LED Emergency Lighting MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: • Standard On/Off Mode: operation at 100% light level then off after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes • “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level Prismatic square Prismatic circle • “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off ALL FITTINGS: 18W / 4200K / 35,000 hrs / IP65 / A+ Rated ALEM3BKFUL shown ALEM3WHEYE shown PAGE 33 IP65 LED EMERGENCY FULL, EYELID OR GRILL ALUMINIUM WALL LIGHTS Full Modern and robust design with options including full, eyelid and grill case, black and white finish, and standard, emergency, multi function microwave and multi function microwave emergency. GRILL EYELID Eyelid Grill ALEM3BKFUL Black ALEM3WHFUL White ALMF3BKFUL Black ALMF3WHFUL White ALEM3BKEYE Black ALEM3WHEYE White ALMF3BKEYE Black ALMF3WHEYE White ALEM3BKGRI Black ALEM3WHGRI White ALMF3BKGRI Black ALMF3WHGRI White Version Luminaire Lumens Emergency Multi-function MW Sensor + Emergency 1400 lm Emergency Multi-function MW Sensor + Emergency 1300 lm Emergency Multi-function MW Sensor + Emergency 1400 lm •D  ie-cast aluminium base and bezel • Polycarbonate diffuser • Full circular/eyelid LED array •P  lug in connector between the terminal block and the gear tray. Terminal block is located on the base, allowing for easy wiring and the gear tray to be removed during installation • Four 20mm cable entries • Tamper-proof, captive, stainless steel allen key screws • See PAGE 23 for non emergency versions • M.O.M: 1 / O.P.Q: 1 EternaPro arranty Extended W ion Colour Standard push fit terminal block www.eterna-lighting.co.uk FULL Code EMERGENCY VERSIONS: •3  hour maintained mode as standard which can also be configured for non-maintained operation plicat ap Available on MULTI-FUNCTION MICROWAVE SENSOR VERSIONS: • Detection sensitivity adjustable - 10/50/75/100% • Daylight sensor adjustable - 5/15/50 Lux/Disable • Mounting height - maximum 6mtr • Detection zone - maximum 16mtr diameter x 6mtr height • Detection angle - 150° (wall mounted), 360° (ceiling mounted) • Standard On/Off Mode: operation at 100% light level then off after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes Ø 365mm ALEM3WHGRI shown FULL: 100mm EYE: 120mm GRILL: 130mm • “ Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level • “ Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off LED Emergency Lighting MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: PAGE 34 IP20 LED 1.4W NON MAINTAINED EMERGENCY DOWNLIGHT Matt Silver or White Trim / 1.4W This LED compact recessed emergency light is ideal for use in corridors, stairwells and other places that require a smart, discreet emergency unit. Actual size: Ø 45mm • Aluminium construction • Compact design • Matt silver and white trims included • Pre-wired for easy installation • LED glows green in standby mode and super bright white light in the event of a mains failure • Excellent alternative to a converted downlight • Minimum 3 hour functionality in emergency mode • 118 lumens in emergency mode • 32mm diameter hole cut out size • M.O.M: 1 / O.P.Q: 20 45mm 33mm 2X COLOUR TRIMS INCL. Code Bright white glow in emergency mode LDLEM3 EternaPro Extended War Available on app ranty lication Emergency module glows green in standby mode Download the SPACING TABLE from: www.eterna-lighting.co.uk/product/ldlem3/ LED MAINTAINED RECESSED EMERGENCY FITTINGS BOTH FITTINGS: White / 6500K / 18,000 hrs Low energy alternative to standard emergency exit fittings LEDMDDEM3 • Slotted pressed steel panel housing polycarbonate down arrow exit legend for unobtrusive exit path designation Available on app ranty lication LEDREM3 Up & left / right legend available for LEDMDDEM3 RLGDUP 320mm 110mm 410mm 135mm Code 260mm LEDREM3 • Polycarbonate reeded diffuser: unobtrusive solution for discreet emergency lighting • Facility for non-maintained mode • Facility for remote switching Extended War 180mm • Pressed steel body • Hinged gear tray: easy installation and maintenance • Hole cut out size: 115mm x 320mm • LEDREM3 = M.O.M: 1 / O.P.Q: 10 • LEDMDDEM3 = M.O.M: 1 / O.P.Q: 6 • RLGDLR / RLGDUP = M.O.M: 1 / O.P.Q: 25 EternaPro LEDMDDEM3 90mm www.eterna-lighting.co.uk Emergency charge light RLGDLR Version Wattage Lumens LEDREM3 Reeded Diffuser 5.20W 162 lm LEDMDDEM3 Edge Lit Panel & Diffuser 3.5W - LED Emergency Lighting LEDMDDEM3 LEDREM3 All legends comply with current regulations PAGE 35 LED EMERGENCY HANGING EXIT SIGN LIGHT White / 2.3W / 6000K / 171 lm / 25,000 hrs • Remote connection box complete with SIGNLGD adjustable length suspension cable (max 80cm) • Supplied with a double-sided down arrow exit legend - left/right & up arrow legends available separately • 3 hour maintained mode as standard which 55mm can also be configured for non-maintained or remote switched operation Up to 800mm • Viewing distance 29m Max. • Test button and LED charge light • SIGNLEDEM3: M.O.M: 1 / O.P.Q: 6 172mm • SIGNLGD/UP: M.O.M: 1 / O.P.Q: 100 All legends comply with current regulations SIGNLGDUP EternaPro Code 340mm Extended War 45mm Available on app SIGNLEDEM3 ranty lication 335mm 8mm IP65 LED TWINSPOT EMERGENCY FITTING White / 7W (2 x 3W) / 3500K / 441 lm / 30,000 hrs / IP65 EternaPro Extended Warranty n 60mm 190mm 75mm 125mm 300mm Code LEDTWNSPOT 70mm IP20 LED EMERGENCY TWINSPOT FITTING White / 3.4W / 6000K / 405 lm / IP20 TSPOTLIP20 50mm nty Extended Warra 310mm • Polycarbonate construction • Individual indicator to show ‘Lamps Healthy’ and ‘Charge’ • Horizontally and vertically adjustable heads, 180° rotation across the horizontal plane • 3 hour non-maintained operation • M.O.M: 1 / O.P.Q: 6 EternaPro Code 170mm 110mm Reduced battery capacity requirement allows a more compact design reducing the weight dramatically compared to traditional products facilitating easier installation. www.eterna-lighting.co.uk Available on applicatio 295mm • Twin 3W LED projectors: provide superior light output to traditional twinspot fittings • Horizontally and vertically adjustable heads, 180° rotation across the horizontal plane • IP65 rating utilising high quality polycarbonate enclosure: for installation in wet or dusty environments • Individual indicator to show ‘Lamps Healthy’ and ‘Charge’ • Reduced battery capacity requirement: allows a more compact design reducing the weight dramatically compared to traditional products facilitating easier installation • Minimum 3 hour non-maintained functionality in emergency mode • M.O.M: 1 / O.P.Q: 6 280mm lication Available on app 55mm EMERGENCY BATTERY PACK FOR ETERNA LED FITTINGS EternaPro Extended Warranty 110mm Available on application 250mm 55mm Code EBPM3 • E nables Eterna LED commercial downlights (RDL range on PAGE 49) and LED panel lights (See PAGE 26-27) to be converted into emergency luminaires, rated at 65W max • 3 hours duration in emergency mode •P  ush fit plug and socket: allows quick & easy installation • F acility for non maintained mode and for remote switching • LED charge light •C  ontrol gear can be removed from the housing: allows use in installations with smaller hole cut out • M.O.M = 1 / O.P.Q = 1 Download the EASY STEP BY STEP WIRING GUIDE from: www.eterna-lighting.co.uk/product/ebpm3/ LED Emergency Lighting White / 65W Max / IP20 PAGE 36 IP20 SLIM LED MAINTAINED EMERGENCY EXIT BOX White / 5.2W / 30,000 hrs / IP20 An aesthetically pleasing, low energy, ultra slim alternative to conventional exit boxes Code EBLSLIMM EternaPro Down, up, left & right legends included 193mm • Ultra slim design: excellent solution where a more compact fitting is required • 3 hour maintained mode as standard which Extended Warranty can also be configured for non maintained Available on application operation • Diffuser on base: for added downward illumination of exit path • Interchangeable down, up, left & right arrow exit legends included • Long life energy efficient LED light source eliminates lamp replacement cycle without compromising panel visibility distance • Facility for remote switching • LED charge light • For wall mounting only • 34 metres viewing distance • M.O.M: 1 / O.P.Q: 10 393mm 27mm All legends comply with current regulations IP20 LED MAINTAINED EMERGENCY EXIT BOX SIGN White / 4W / 30,000 hrs / IP20 EternaPro • Steel construction • 3 hour maintained mode as standard which can also be configured for non maintained operation • Facility for remote switching • Interchangeable polycarbonate down arrow exit legend included • Diffuser on base: for added downward illumination of exit path • Long life energy efficient LED light source eliminates lamp replacement cycle without compromising panel visibility distance • LED charge light and battery test button • Viewing distance: 34m • EXIT3MLED = M.O.M: 6 / O.P.Q: 6 • Legends = M.O.M: 1 / O.P.Q: 100 All legends comply with current regulations EBLGDL Extended Warranty Available on application EBLGDR Code EXIT3MLED EBLGDU 192mm www.eterna-lighting.co.uk Low energy alternative to standard emergency exit signs. 390mm 60mm Full range of alternative legend directional panels available IP65 LED MAINTAINED / NON MAINTAINED EMERGENCY BULKHEADS BOTH FITTINGS: White / 6000K / 30,000 hrs / IP65 Low energy alternative to standard • Polycarbonate construction • Internal or external use fluorescent emergency bulkheads. • 20mm gland entries as standard • Minimum 3 hour functionality in emergency mode • High output LEDs with bright white light • Semi recessed fixing: allows a more discreet installation option • Dedicated self adhesive legend pack included with a combination of symbols: allows multiple exit path designation options (LGDSET) • Fitting / Frame = M.O.M: 1 / O.P.Q: 12 • LGDSET = M.O.M: 12 / O.P.Q: 12 All legends comply with current regulations EternaPro 150mm 346mm 392mm 45mm Code Version Wattage EMLED3M Maintained 7W EMLED3NM Non Maintained 2W Lumens 235/150 lm Extended Wa rranty Available on application 150 lm Hinged gear tray & push fit terminal block: allows for quicker and easier installation and maintenance 110mm BULKHEAD FRAME (BULKFRAME): • For use with emergency bulkheads • Pressed steel construction • Spring retaining clips • Semi recessed fixing: allows a more discreet installation option • Hole cut out size: 350mm x 117mm 105mm LED Emergency Lighting EMLED3M: • Facility for remote switching and non-maintained mode • 235 lm when connected to mains,150 lm when connected to battery 355mm 70mm