Preview only show first 10 pages with watermark. For full document please download

Altai-das-wifi-ap-catalog-eng

   EMBED


Share

Transcript

Altai DAS WiFi AP Patented Altai Super WiFi Technologies for Indoor 3G Offload Field-proven Coverage Similar to 3G While just connecting an AP directly to a DAS cannot work properly, the Altai patent pending DAS WiFi system and technologies are specially engineered for integrating WiFi into a DAS network. The WiFi signals travel along the cable as far as the 3G signals and cover close to the same footprint as the 3G system, and travel further, and with better coverage and throughput as compared to standard AP. Altai DAS WiFi AP With patented Altai Super WiFi Technologies, the Altai DAS WiFi Access Point is designed to work with any Distributed Antenna System (DAS) originally built for 3G/CMDA/GSM, where the 3G and WiFi signal can be carried over the same antenna network inside a building and provide 3G and WiFi coverage to all the clients at the same time. The DAS WiFi solution can easily reduce the costs and the times for both deployment and maintenance in implementing 3G data offload as compared to building a separate WLAN network. No Impact to Existing 3G Network The all-in-one patent pending product design for the DAS WiFi AP comes with an integrated dualband combiner which makes installation simple. It will not affect the 3G signals passing through even in case of power failure. Combination with A8n Super WiFi Base Station The Altai DAS WiFi AP provides the most cost effective and versatile way to provide indoor 3G/WiFi capacity, coverage and time-todeploy. When combined with the A8n Super WiFi Base Station, it creates the most cost-effective high capacity WiFi network for both indoor and outdoor applications. The DAS WiFi AP is capable of providing the highest possible data throughput and capacity that the 802.11n standards can offer, and at the same time is backward compatible to the 802.11b/g standards. The DAS WiFi AP employs the smart antenna combining technology, where 3G/CDMA/GSM and WiFi signals can be transmitted over the same RF cable. The high isolation between the cellular and WiFi bands causes insignificant impact to the original 3G system. Super Long Range DAS Coverage Access Range Data Rate Support 40 DAS antennas 150 Mbps As an integral part of our Super WiFi network infrastructure, the Altai DAS WiFi AP provides:  Field-proven integration into existing 3G/CDMA/GSM Distributed Antenna System (DAS)  IP-67 rated carrier grade weatherproof enclosure for both outdoor and indoor applications  3G data offload – by adding WiFi to existing 3G network Easy installation & web-based management  2.4 GHz 802.11b/g/n high throughput radio up to 150 Mbps data rate    Cause insignificant impact to existing 3G system due to a high isolation and low insertion loss dual-band combiner Integrated combiner for all-in-one simple installation, supports 3G pass through in case of power failure Altai Technologies Ltd. All rights reserved Altai DAS WiFi AP Patented Altai Super WiFi Technologies for Indoor 3G Offload Wireless Interface Management 802.11b/g/n (1x1) Radio                      Operating Mode Standard Operating Frequency Transmit Power Access Point for DAS IEEE 802.11b/g/n 2.400 – 2.484 GHz (Ch 1-13) Up to 30 dBm (Peak) 27 dBm (Average) Receiver Sensitivity (Typical) 802.11b 11 Mbps -91 dBm 1 Mbps -97 dBm 802.11g 54 Mbps -78 dBm 6 Mbps -95 dBm 802.11n HT20 -95 dBm HT40 -92 dBm 16 SSID (Max.) Altai AirFi™ Throughput Optimization Automatic Channel Selection (with Scheduling) WMM Reuse Antennas in DAS 1 x N-female for 3G Input from Triplexer 1 x N-female for 3G+WiFi Output to DAS antenna 1 x 10/100 Mbps Ethernet Port to Internet Integrated combiner         Frequency Range Bandwidth Return Loss Power Insertion Loss Ripple Rejection between ports Impedance  Dimension  Weight 2.4 – 2.5 GHz 100 MHz ≥ 18 dB ≤ 50 W ≤ 0.5 dB ≤ 0.4 dB ≥ 80 dB 220 x 220 x 60 mm 2.5 kg (Unit Weight) 5.6 kg (Gross Weight) Pole or Wall-mounted 10/100/1000 Mbps Ethernet Port Power Supply  Power Source  Power Consumption PoE Injector (56 V), 802.3at Compliant*, optional -48 V DC 10 W (Typical) / 20 W (Max.) Environmental Specification  Operating Temperature 0.8 – 2.2 GHz 1400 MHz ≥ 18 dB ≤ 50 W ≤ 0.5 dB ≤ 0.4 dB ≥ 80 dB 50 Ω Networking         Physical Specification  Mounting  Network Interface Connection  External Antenna  Connector Cloud-based Management by AltaiCare Server-based Management by AWMS Controller-based Management by Access Controller Web User Interface Command Line Interface (SSH) 3-level User Login Remote Firmware Upgrade (HTTP, TFTP) SNMP v1/ v2c MIB2/ IF-MIB/ Altai Enterprise MIB Performance Statistics/ Alarm Information Display WiFi Client Association/ Disassociation Statistics Syslog  Storage Temperature  Humidity -40 °C to +60 °C (Ambient) 0 °C to +40 °C (PoE Injector) -40 °C to +80 °C 5 to 100% (Condensing) Certification  FCC/ CE/ Others Product Ordering Information Standard Package  DAS WiFi AP (Model No.: AP5822)  Integrated Dual-band Combiner  PoE Injector  Mounting Accessories VLAN IPv4/ IPv6 Dual-stack Switch (Bridge) and Gateway Mode DHCP Client/ Server NAT PPPoE Client Bandwidth Control Per VAP/ Client Multicast Rate Filter/ IGMP Snooping Contact Us  Email: [email protected] Security  Authentication – Open system, Shared key, WPA/ WPA-PSK, WPA2/ WPA2-PSK, 802.1x (EAP-PEAP/ TLS/ TTLS/ SIM/ AKA)  Encryption – WEP, TKIP, AES  RADIUS Client (PAP, CHAP)  RADIUS Accounting  Inter/ Intra-client Isolation  MAC-based Access Control (White/ Black List)  SSID Suppression  WAPI  DAS-PB-150428 The access range will be varied depending on the DAS architecture. The transmit power will be varied according to country regulation. Although Altai has attempted to provide accurate information in these materials, Altai assumes no legal liability for the accuracy and completeness of the information. All specifications are subject to change without notice. Altai Technologies Ltd. All rights reserved