Transcript
ALTV1224I - Isolated CCTV Camera & Accessory Power Supply Product Description: The Altronix ALTV1224I CCTV Power Supply is specifically designed to power CCTV cameras which are not equipped with internal isolation, however it can operate cameras with built-in isolation as well. It will provide 12VAC or 24VAC distributed via eight (8) completely isolated fuse protected outputs.
Specifications:
F7 F8
F4
8A 7B
3B 4A
8B
4B
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 website: www.altronix.com, e-mail:
[email protected], Lifetime Warranty, Made in U.S.A. IIALTV1224I - Rev. 061699
F3
3A
7A
6B
6A 5B
5A
F2
XFMR
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. MEMBER
F1
F6
2B
1) Mount ALTV1224I enclosure in desired location 2) Connect 115 VAC input power to xfmr leads using the following procedure. a) For power supply to provide 24 VAC output connect 115 VAC input power to the White transformer lead and either (not both) of the Black transformer leads (in this configuration one black transformer lead is not used). b) For power supply to provide 12 VAC output connect 115 VAC input power to each of the Black transformer leads. (in this configuration White transformer lead is not used) Note: Any transformer leads which are not used must be carefully insulated to avoid contact with enclosure or cause electrical shock! 3) Connect CCTV cameras to output terminals using the following procedure: Camera 1 to output terminals 1A & 1B Camera 2 to output terminals 2A & 2B Camera 3 to output terminals 3A & 3B Camera 4 to output terminals 4A & 4B Camera 5 to output terminals 5A & 5B Camera 6 to output terminals 6A & 6B Camera 7 to output terminals 7A & 7B Camera 8 to output terminals 8A & 8B
F5
Outputs
1B 2A
Installation Instructions:
A
Outputs
1A
• Input 115 VAC 50/60 Hz, .6 amp. • 12 or 24 VAC selectable output. • Eight (8) completely isolated fuse protected outputs. • Each output is rated at 0.5 amp. • Fuses are rated at 0.5 amps/250 VAC. Enclosure dimensions: 12.5” H x 7.5” W x 4.5” D
