Transcript
ALTV2416-350 High Current CCTV Camera & Accessory Power Supply Overview: The Altronix ALTV2416-350 CCTV Power Supply is designed with 16 individually fused outputs for powering CCTV Cameras and other video accessories. It will provide 24VAC distributed via 16 fuse output with a total of 14.5 amps continous supply current.
F3
F4
F5
F6
F7
F8
FUSED POWER OUTPUTS
JMP1
F2
MAIN FUSE
F1
A Outputs 1-8
PD8
P
SPARE MOV
1
2
3
4
5
6
7
LED
8
SW1
N COMMON POWER OUTPUTS
F1
F2
F3
F4
ON
F5
F6
F7
OFF
F8 MAIN FUSE
Specifications: • Input 115VAC/60 Hz, 2.9 amps. • 32 individually fused outputs • Output fuses are rated at 3.5 amps / 250VAC (Fig. 1). • Main fuses are rated at 10 amps/250VAC (Fig. 1). • 24 VAC output. • 14.5 amps (350 VA) supply current. • AC power LED indicator. • Power ON/OFF switch. • Ease of installation saves time and eliminates costly labor • Unit is supplied assembled in enclosure. • Surge protection. • Unit maintains camera synchronization. • Spare fuses included. Enclosure dimensions: 15.5"H x 12"W x 5"D Note: Also available with 220VAC input
FUSED POWER OUTPUTS
B Outputs 9-16
PD8
P
SPARE MOV
1
2
3
4
5
6
7
8
LED SW1
N COMMON POWER OUTPUTS
ON
OFF
Installation Instructions: 1. Mount ALTV2416-350 in desired location. White Lead 115 VAC, 2. Slide switch SW1 (Fig. 1) to OFF position. 60 Hz Input, XFMR XFMR 1.45 amp Black 3. Connect the AC (115 VAC 50 / 60 Hz) to the Lead two black and white flying leads of the transformers (Fig. 1). 4. Connect devices to output terminals using the following procedure (Fig. 1). Circuit Board A - Camera 1 thru 8 output terminals 1P & 1N thru 8P & 8N. Circuit Board B - Camera 9 thru 16 output terminals 1P & 1N thru 8P & 8N. Note: Is good operating practice to measure output voltage before connecting devices. All terminals with common suffix P 1P, 2P...” are same polarity. 5. Slide switch SW1 (Fig. 1) to ON position. 6. Green LED will illuminate when AC power is present 7. Upon completion of wiring, secure enclosure door with screws (supplied).
White Lead Black Lead
115 VAC, 60 Hz Input, 1.45 amp
Fig. 1
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This installation should be made by qualified service personnel and should conform to all local codes and in accordance with the National Electrical Codes.
Enclosure dimensions: 15.5"H x 12"W x 4.5"D 12" 2.25"
4.56"
3.68"
1.22"
4.5" .875"
1.22"
1.22"
1.3"
9.97"
1"
1" 2"
2"
8"
13.25" 13.53"
3.25"
2.2" 1.25"
1"
15.5"
1.22"
2.25"
3.68"
4.56"
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. MEMBER
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 web site: www.altronix.com, e-mail:
[email protected], Made in U.S.A. IIALTV2416-350 - Rev. 062199
