Transcript
ALTV2416-350CB High Current CCTV Camera & Accessory Power Supply
F1
F2
F3
F4
F5
F6
F7
F8
PD8-CB
A
SPARE
P 1
2
3
4
5
6
7
Outputs 1-8
LED
8
SW1 N
P
N ON
COMMON POWER OUTPUTS
F1
F2
F3
F4
F5
F6
F7
OFF
MAIN FUSE
Specifications: • Input 115VAC/60 Hz, 2.9 amps. • 16 circuit breaker protected outputs rated @ 2.5 amps (Fig. 1). • 24 VAC output. • 14.5 amps (350 VA) supply current. • AC power LED indicator. • Power ON/OFF switch. • Ease of installation saves time and eliminates costly labor • Unit is supplied assembled in enclosure. • Surge protection. • Unit maintains camera synchronization. Enclosure dimensions: 15.5"H x 12"W x 5"D
MAIN FUSE
Overview: The Altronix ALTV2416-350CB CCTV Power Supply is designed with 16 individually circuit breaker protected outputs for powering CCTV Cameras and other video accessories. It will provide 24VAC distributed via 16 circuit breaker protected output with a total of 14.5 amps continous supply current.
F8
B
PD8-CB
Outputs 9-16
SPARE
P 1
2
3
4
5
6
7
LED
8
SW1 N
P
N COMMON POWER OUTPUTS
ON
OFF
Optional available with 220VAC input order model # ALTV2416-350CB/220. Installation Instructions: White 1. Mount ALTV2416-350CB in desired location. Lead 115 VAC, 60 Hz Input, XFMR 2. Slide switch SW1 (Fig. 1) to OFF position. 1.45 amp Black Lead 3. Connect the AC (115 VAC 50 / 60 Hz) to the two black and white flying leads of the transformers (Fig. 1). 4. Connect devices to output terminals using the following procedure (Fig. 1). Circuit Board A - Camera 1 thru 8 output terminals 1P & 1N thru 8P & 8N. Circuit Board B - Camera 9 thru 16 output terminals 1P & 1N thru 8P & 8N. Note: Is good operating practice to measure output voltage before connecting devices. All terminals with common suffix P 1P, 2P...” are same polarity. 5. Slide switch SW1 (Fig. 1) to ON position. 6. Green LED will illuminate when AC power is present 7. Upon completion of wiring, secure enclosure door with screws (supplied).
White Lead
XFMR Black Lead
115 VAC, 60 Hz Input, 1.45 amp
Fig. 1
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This installation should be made by qualified service personnel and should conform to all local codes and in accordance with the National Electrical Codes.
Enclosure dimensions: 15.5"H x 12"W x 4.5"D 12" 2.25"
4.56"
3.68"
1.22"
4.5" .875"
1.22"
1.22"
1.3"
9.97"
1"
1" 2"
2"
8"
13.25" 13.53"
3.25"
2.2" 1.25"
1"
15.5"
1.22"
2.25"
3.68"
4.56"
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. MEMBER
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 web site: www.altronix.com, e-mail:
[email protected], Made in U.S.A. IIALTV2416-350CB - Rev. 062199
