Transcript
ALTV2416 Series CCTV Power Supplies Installation Guide Models Include:
• ALTV2416
• ALTV2416CB
• ALTV2416350
• ALTV2416350CB
• ALTV2416300M
• ALTV2416300CBM
• ALTV2416600
• ALTV2416600CB
- 24VAC @ 8A (200VA) - 24VAC @ 8A (200VA) or 28VAC @ 7A. or 28VAC @ 7A. - Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs. - 24VAC @ 14A (350VA) - 24VAC @ 14A (350VA) or 28VAC @ 12.5A (350VA). or 28VAC @ 12.5A (350VA). - Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs. - 24VAC @ 12.5A (300VA) - 24VAC @ 12.5A (300VA) or 28VAC @ 10A (300VA). or 28VAC @ 10A (300VA). - Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs. - 24VAC @ 28A (700VA) - 24VAC @ 28A (700VA) or 28VAC @ 25A (700VA). or 28VAC @ 25A (700VA). - Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.
Rev. 071712
Overview: ALTV2416 Series CCTV Power Supplies provide 24VAC/28VAC distributed via sixteen (16) fuse or PTC protected outputs for powering CCTV Cameras, heaters, and other video accessories.
Sixteen (16) Output ALTV2416 Reference Chart:
Altronix Model Number ALTV2416 ALTV2416CB ALTV2416350 ALTV2416350CB ALTV2416300M ALTV2416300CBM ALTV2416600 ALTV2416600CB
Input:
Output Voltage 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC
Total Output Output Number PTC Fuse Current Current of Protected Protected (max. per Main Fuse (Power) Outputs Outputs Outputs output) Ratings 8A 16 ----3.5A P 7A Two (2) 5A/250V 8A 16 ----2.5A P 7A 14A 16 ----3.5A P 12.5A 14A 16 ----2.5A P 12.5A 12.5A 16 ----3.5A P 10A ----12.5A 16 ----2.5A P 10A 28A 16 ----3.5A P 25A 28A 16 ----2.5A P 25A
115VAC 50/60Hz Input Current 1.9A
2.7A
5.4A
Specifications: Features (cont’d):
• 115VAC, 50/60Hz.
Output: • Sixteen (16) fuse or PTC protected outputs. • 24VAC or 28VAC output voltage. • Outputs are rated @ 3.5A (fused) or 2.5A (PTC). • Surge suppression.
Features: • Surge suppression. • AC power LED indicator. • Power ON/OFF switch (ALTV2416 and ALTV2416CB). • Illuminated power disconnect circuit breaker with manual reset for all other models.
• Unit maintains camera synchronization. • Ease of installation saves time & eliminates costly labor. • Spare fuses included (on fuse protected models).
Enclosure Dimensions: ALTV2416 and ALTV2416CB: 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm). ALTV2416300M and ALTV2416300CBM: 8.5” x 7.5” x 3.75” (215.9mm x 191mm x 95mm). ALTV2416350, ALTV2416350CB, ALTV2416600, and ALTV2416600CB: 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm).
Installation Instructions: 1. 2. 3.
- 2 -
Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the two upper screws, level and secure. Mark the position of the lower two holes. Remove the enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s upper keyholes over the two upper screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 7, 8). Secure enclosure to earth ground. Slide switch on PD board to OFF position for models ALTV2416 and ALTV2416CB (Fig. 1, pg. 4). Turn OFF main switch on all other models (Figs. 2-4, pgs. 4-6). All units are factory set for 24VAC operation. For 28VAC operation, adjust unit prior to mounting and applying power as follows: Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and the yellow wire [24V] is connected to the terminal marked [S]. ALTV2416 series
4. 5. 6. 7. 8. 9.
Connect AC power to the black and white flying lead of the transformer(s) (Figs. 1-4, pgs. 4-6). Use 18 AWG or larger for all power connections. Measure output voltage before connecting devices. This helps avoiding potential damage. Terminals marked [1P - 8P] are positive of the same polarity. CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the output voltage. Connect devices to terminals marked [1P - 1N] through [8P - 8N] on PD8/PD8CB board (Fig. 1, pgs. 4), carefully observing polarity [1P - 1N] through [16P - 16N] on PD16W/PD16WCB board. Slide switch on PD board to ON position for models ALTV2416, and ALTV2416CB (Fig. 1, pg. 4). Turn main switch on all other models to the “RESET” (ON) position (Figs. 3-5, pgs. 5-6). Green LED will illuminate when the unit is powered. Upon completion of the wiring, secure enclosure door with screws (supplied). CAUTION: Equipment must be installed/serviced by authorized/trained personnel only. Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This installation should be made by qualified service personnel and should conform to the National Electrical Code and all local codes. PD8/PD8CB - Power Distribution Module Terminal Legend 1P - 8P 1N - 8N
Terminal Identification:
Function/Description AC output. AC output.
PD16W/PD16WCB - Power Distribution Module Terminal Legend 1P - 16P 1N - 16N
ALTV2416 series
Function/Description AC output. AC output.
-3-
8
D1
FUSED
N
POWER
COMMON
OUTPUTS
POWER
OUTPUTS
MAIN FUSE
1
SW1
N
P
S
3
4
5
6
7
8
FUSED
N
INPUT
24VAC or 28VAC fused output 1 (Follow same procedure using terminals 2P & N through 8P & N fused outputs 2 through 8)
POWER
COMMON
OUTPUTS
POWER
N
P
S
2
3
5
6
N
COMMON
POWER
POWER
LED
R1
OUTPUTS
N
N
P
S
INPUT
28VAC Output
S
N
P
S
XFMR
Black
Yellow
Black Lead
P
Black
XFMR
Black Lead
SW1
(example: ALTV2416CB)
White Lead
115VAC input 50/60 Hz.
F8
8
OUTPUTS
24VAC Output (Factory Set) White Lead
7
F7
Used on PTC Models
24VAC or 28VAC fused output 1 (Follow same procedure using terminals 2P & N through 8P & N fused outputs 2 through 8)
115VAC input 50/60 Hz.
F6
D1
FUSED
INPUT
4
F5
P
LED
R1
OUTPUTS
1
SW1
D1
LED
R1
2
P
F4
OFF
7
F3
ON
6
F2
Yellow
5
OFF
4
ON
3
OFF
2
ON
1
P
F1
MAIN FUSE
Back Panel of Enclosure MAIN FUSE
Enclosure Door
Fig. 2 - ALTV2416350 • ALTV2416350CB
Used on PTC Models (example: ALTV2416350CB) S
LED
N
D1
3
POWER
R1
P
2
FUSED
4 8
OUTPUTS
N
3
D1
R1
FUSED
P
F8
P
INPUT
INPUT
OUTPUTS
1
LED
S
LED
S
2
POWER
4
POWER
8
F7
D1
R1
P
COMMON
OUTPUTS
5
7
F6
N
Power Switch
N
6
7
5
F5
OUTPUTS
F4
OUTPUTS
OUTPUTS
6
POWER
F3
POWER
POWER
24VAC or 28VAC fused output 1 (Follow same procedure using terminals 2P & N through 8P & N fused outputs 2 through 8)
COMMON
F2
FUSED
COMMON
F1
1
INPUT
P
N
P
N
Fig. 1 - ALTV2416 • ALTV2416CB
P
S
Yellow
N
Black
24VAC Output (Factory Set)
- 4 -
P
S
Yellow
N
Black
28VAC Output
Black Lead
115VAC input 50/60 Hz, White Lead
XFMR*
ALTV2416 series
Fig. 3 - ALTV2416300M • ALTV2416300CBM
Power Switch
Used on PTC Models
(example: ALTV2416300CBM) 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
N P
9 10 11 12 13 14 15 16
N P
N
N
P
P
S XFMR Input
P
P S XFMR Input
Transformer underneath power supply board
common outputs protected outputs
N
common outputs protected outputs
N
1 2 3 4 5 6 7 8
PTC’s
PD16W
ALTV2416 series
3.5A 250V
For continuous protection against risk of fire replace fuses with same type and rating.
PD16W
-5-
LED R1
D1
8
5
OUTPUTS
POWER FUSED
OUTPUTS POWER
OUTPUTS
F5 F4 F3 F2
COMMON
N
P
P
INPUT
N
1
LED
S
F1
FUSED
2
POWER
POWER
4 3
D1
R1
P
COMMON
OUTPUTS
6 5
8
N
MAIN FUSE
ALTRONIX CORP. MADE IN USA BROOKLYN, NY 11220
7
OUTPUTS
7
6
OUTPUTS
F6
F7
N
D1
R1
4
POWER
POWER
3
P
F8
2
S
INPUT
MAIN FUSE
1
FUSED
COMMON
LED
MAIN FUSE
P
24VAC or 28VAC fused output 1 (Follow same procedure using terminals 2P & N through 8P & N fused outputs 2 through 8)
INPUT
Used on PTC Models (example: ALTV2416600CB) N
Fig. 4 - ALTV2416600 • ALTV2416600CB
Power Switch
P
S
Black
N
Yellow
24VAC Output (Factory Set)
Black Lead
P
S
Yellow
N
XFMR*
Black
28VAC Output
115VAC input, 50/60 Hz.
XFMR*
White Lead
- 6 -
ALTV2416 series
Enclosure Dimensions (H x W x D approximate):
7.25” (184.15mm) 3.625” (184.15mm)
ALTV2416 and ALTV2416CB 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
1.25” (31.75mm) 3.5” (88.9mm)
1.25” (31.75mm)
0.6” (15.24mm)
0.6” (15.24mm)
6.05” (153.67mm)
1.125” (28.575mm)
1.125” (28.575mm)
2” (50.8mm)
2” (50.8mm)
8.125” (206.375mm)
1” (25.4mm)
1” (25.4mm) 6.05” (153.67mm)
0.6” (15.24mm)
0.6” (15.24mm)
1.25” (31.75mm)
3.5” (88.9mm) 1” (25.4mm) 1” (25.4mm)
5.25” (133.35mm)
Enclosure Dimensions (H x W x D approximate):
1” (25.4mm)
3.63” (92.2mm)
ALTV2416300M and ALTV2416300CBM 8.5” x 7.5” x 3.75” (215.9mm x 191mm x 95mm)
1.25” (31.75mm) 3.85” (97.79mm)
7.25” (184.15mm)
0.6” (15.24mm)
1.25” (31.75mm)
1.25” (31.75mm)
0.6” (15.24mm)
1” (25.4mm)
1” (25.4mm) 0.9” (22.86mm)
0.9” (22.86mm)
8.13” (206.5mm)
8.13” (206.5mm)
1.75” (44.45mm) 1” (25.4mm)
1” (25.4mm) 0.6” (15.24mm)
1.25” (31.75mm)
0.6” (15.24mm)
3.85” (97.79mm)
3.85” (97.79mm) 1” (25.4mm) 1” (25.4mm)
ALTV2416 series
7.25” (184.15mm)
1” (25.4mm)
-7-
Enclosure Dimensions (H x W x D approximate): ALTV2416350, ALTV2416350CB, ALTV2416600, and ALTV2416600CB 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm) 1.40” (36mm)
4.85” (123mm)
4.85” (123mm)
1.40” (36mm)
1.20” (31mm) 3.25” (83mm)
1.20” (31mm)
0.75” (19mm)
12.5” (318mm) 11.0” (279mm)
1.20” (31mm)
0.75” (19mm) 0.9375” (24mm)
1.40” (36mm)
1.40” (36mm)
5.10” (130mm)
5.10” (130mm)
13.0” (330mm)
5.10” (130mm) 6.5625” (167mm)
0.9375” (24mm)
3.25” (83mm)
3.25” (83mm) 3.25” (83mm)
1.0” (25mm)
1.0” (25mm)
1.0” (25mm)
10.5” (267mm)
1.0” (25mm)
Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 web site: www.altronix.com, e-mail:
[email protected]. Lifetime Warranty, Made in U.S.A. IIALTV2416 Series - 8 -
A07P
MEMBER ALTV2416 series
