Transcript
www.avnet-embedded.eu
Embedding success in your business
DATASHEET Cover Lens Bezel
Touch Sensor
Bonding / Optical / Tape
Embedded Board / AD Driving solution
AM-800480AHTMQWA0H
TFT display Storage Wireless Software
Backlight Driver Computer-on-Module Memory
Housing
Date: April 2014
Complete Displays Based Systems Provider
Total Cost of Ownership
Local Expertise
Integrating TFT LCD, Touch, Embedded Board, Microsoft Embedded OS, Wireless, Printer and all relevant cables working together seamlessly
Saving you time and money and allowing you to free up your engineering resource
Technical support at your doorstep with local labs and engineers taking you from concept to production
If you require a touch panel solution. For information on touch sensors, sensor driving and touch panel bonding solutions, scan the QR code or click the URL www.avnet-embedded.eu/products/displays/
SPECIFICATIONS FOR LCD MODULE
CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. APPROVED
AM-800480AHTMQW-A0H
BY
DATE Approved For Specifications Approved For Specifications & Sample AMPIRE CO., LTD. 4F., No.116, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City221, Taiwan (R.O.C.) 新北市汐止區新台五路一段 116 號 4 樓(東方科學園區 A 棟) APPROVED BY
Date : 2014/4/25
CHECKED BY
AMPIRE CO., LTD.
ORGANIZED BY
1
www.avnet-embedded.eu
RECORD Revision Date Page 2014/4/25
Date : 2014/4/25
OF
REVISION Contents
New Release
AMPIRE CO., LTD.
Editor Rober
2
www.avnet-embedded.eu
1. Features 9 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) module. This module is composed of a 8” TFT-LCD panel , a driving circuit and LED backlight. (1) Construction: 9” a-Si TFT active matrix, White LED Backlight. (2) Resolution (pixel): 800(R.G.B) X480 (3) Number of the Colors : 256K colors ( R , G , B 6 bit digital each) (4) LCD type : Transmissive, normally White (5) Interface: LVDS interface 30 pin (6) Power Supply Voltage: 3.3V for logic voltage. (7) Viewing Direction: 6 O’clock (Gray Inversion)
2. PHYSICAL SPECIFICATIONS Item LCD size Resolution
Specifications
unit
9 inch (Diagonal) 800 x (RGB) x 480
dot
Dot pitch
0.0825(W) x 0.2327(H)
mm
Active area
198.0(W) x 111.696(H)
mm
Module size
211.1(W) x 126.5(H) x 10.9(D)
mm
Color arrangement interface Weight
Date : 2014/4/25
RGB-stripe Digital T.B.D (typ.)
AMPIRE CO., LTD.
g
3
www.avnet-embedded.eu
3. ABSOLUTE MAX. RATINGS Values Item
Symbol Min.
Max.
UNIT
Note GND=0
LED Power Supply Voltage
VLED
-0.3
13.0
V
Logic Supply Voltage
VDD
-0.3
5.0
V
Operation temperature
TOP
-20
80
℃
Storage temperature
TST
-30
80
℃
Note 1: The product is subject to be damaged permanently if stresses beyond those absolute maximum ratings listed above. Signals include : DCLK, DE, HS, VS, R0~R5, G0~G5, B0~B5.
Date : 2014/4/25
AMPIRE CO., LTD.
4
www.avnet-embedded.eu
4. ELECTRICAL CHARACTERISTICS 4.1 TFT LCD Module Values Item Power voltage
Symbol VDD
Current of power IDD supply Power voltage for VLED LED driver LED driver current ILED of power supply Note 1: VDD-dip condition :
UNIT
Note
Min.
Typ.
Max.
3.0
3.3
3.6
V
Note1
-
0.3
-
A
VDD=3.3V Black pattern
--
12
13
V
-
500
VLED=12V ADJ=100%
mA
when 2.7V≦VDD<3.0V，td≦10ms. VDD＞3.0V，VDD-dip condition should be same as VDD-turn-con condition.
4.2 Switching Characteristics of LVDS Receiver Item
Differential Input High Threshold Differential Input Low Threshold Input current Differential input Voltage Common Mode Voltage Offset
Symbol
Min.
Typ.
Max.
Unit
Condition
VTH
--
--
100
mV
VCM=1.2V
VTL
-100
--
--
mV
IIN
-10
--
+10
uA
|VID|
0.2
--
0.6
V
VCM
VID 2
1.25
2.4-
VID 2
V
LVDS VINP
LVDS VINN
Date : 2014/4/25
AMPIRE CO., LTD.
5
www.avnet-embedded.eu
4.3 Backlight Driving Conditions Values Item
Symbol
Unit
Note
Min.
Typ.
Max.
VLED
-
12
13
V
ILED
-
500
-
mA
VADJ
-
3.3
VLED
V
LED voltage
VAK
15
15.5
15.9
V
IL =300mA Ta=25℃
LED current
IAK
--
300
--
mA
Ta=25℃
LED Life Time
-
--
20K
--
Hour
Note (2)
LED Driver voltage Power Supply Current For LED Driver ADJ Input Voltage
VLED=12V VADJ=3.3V (duty 100%)
duty=100%
Note (1) The constant current source is needed for white LED back-light driving. When LCM is operated over 60 deg.C ambient temperature, the IL of the LED back-light should be adjusted to 240mA max There are 6 Groups LED shown as below , VAK =15.5V ,Ta=25℃ LED_A
20mA
IAK=300mA
LED_K
Date : 2014/4/25
AMPIRE CO., LTD.
6
www.avnet-embedded.eu
Note2 : Condition: Ta=25℃, ILED(max)=500mA, IAK=300mA,Duty Cycle=100%,continuous lighting Life time is estimated data. Definitions of failure: 1. LCM brightness becomes half of the minimum value. 2. LED doesn’t light normally. When LCM is operated over 40℃ ambient temperature, the ILED should be follow :
Date : 2014/4/25
AMPIRE CO., LTD.
7
www.avnet-embedded.eu
4.4 Power Sequence 4-4-1 Power on sequence
Note : Data Signal includes DCLK, DE, HS, VS, R0~R5, G0~G5, B0~B5.
4-4-2 Power off sequence
Note : Data Signal includes DCLK, DE, HS, VS, R0~R5, G0~G5, B0~B5.
Date : 2014/4/25
AMPIRE CO., LTD.
8
www.avnet-embedded.eu
5. Optical Specifications Values Item
Viewing angle (CR≧10)
Symbol
Condition Min.
Typ.
Max.
θL
Φ = 180° (9 o’clock)
60
70
--
θR
Φ = 0° (3 o’clock)
60
70
--
θT
Φ = 90° (12 o’clock)
40
50
--
θB
Φ = 270° (6 o’clock)
60
70
--
--
10
20
TON
Unit
Note
degree
Note1
msec
Response time
Note3 TOFF
--
15
30
msec
CR
400
500
--
--
0.26
0.31
0.36
--
WY
0.28
0.33
0.38
--
Luminance
L
400
500
--
cd/㎡
Note6
Luminance uniformity
YU
70
75
--
%
Note7
Contrast ratio Color chromaticity
WX
Normal θ=Φ=0°
Note4 Note5 Note6
Test Conditions : 1. IL = 300mA (Backlight current), the ambient temperature is 25℃. 2. The test systems refer to Note 2.
Date : 2014/4/25
AMPIRE CO., LTD.
9
www.avnet-embedded.eu
Note 1 : Definition of viewing angle range
Note 2 : Definition of optical measurement system. The optical characteristics should be measured in dark room. After 30 minutes operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view : 1° / Height : 500mm.)
Date : 2014/4/25
AMPIRE CO., LTD.
10
www.avnet-embedded.eu
Note 3 : Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%.
Note 4 : Definition of contrast ratio Luminance measured when LCD on the “White” state Contrast ratio (CR) = Luminance measured when LCD on the “Black” state Note 5 : Definition of color chromaticity (CIE1931) Color coordinated measured at center point of LCD. Note 6 : All input terminals LCD panel must be ground when measuring the center area of the panel.
Date : 2014/4/25
AMPIRE CO., LTD.
11
www.avnet-embedded.eu
Note 7 : Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer to bellow figure). Every measuring point is placed at the center of each measuring area. Bmin Luminance Uniformity (Yu) = Bmax L ----- Active area length
W ----- Active area width
Bmax : The measured maximum luminance of all measurement position. Bmin : The measured minimum luminance of all measurement position.
Date : 2014/4/25
AMPIRE CO., LTD.
12
www.avnet-embedded.eu
6. INTERFACE Electrical Interface Connection CN1(Input signal): CSTAR DS100-430-H23 (equivalent JAE FI-XB30SSRL-HF16) Pin No.
Symbol
Description
1
GND
Ground
2
VDD
3.3V Power
3
VDD
3.3V Power
4
V_EDID
5
ADJ
3.3V Power for EDID Adjust for LED brightness
6
CLK_EDID EDID Clock Input
7
DATA_EDID EDID Data Input
8
RXIN0-
LVDS Signal - channel0-
9
RXIN0+
LVDS Signal+ channel0+
10
GND
11
RXIN1-
Data Input channel1-
12
RXIN1+
Data Input channel1+
13
GND
14
RXIN2-
Data Input channel2-
15
RXIN2+
Data Input channel2+
16
GND
Note*
Ground
Ground
Ground
17
RXCLKIN- Data Input CLK-
18
RXCLKIN+ Data Input CLK+
19
GND
20
NC
No connection
21
NC
No connection
22
GND
Ground
23
GND
Ground
24
VLED
VLED Power +12V
Date : 2014/4/25
Note
Ground
AMPIRE CO., LTD.
13
www.avnet-embedded.eu
25
VLED
VLED Power +12V
26
VLED
VLED Power +12V
27
NC
No connection
28
NC
No connection
29
NC
No connection
30
NC
No connection
Date : 2014/4/25
AMPIRE CO., LTD.
14
www.avnet-embedded.eu
(3) LVDS Connector : CSTAR DS100-430-H23
Date : 2014/4/25
AMPIRE CO., LTD.
15
www.avnet-embedded.eu
7. INPUT SIGNAL : 7-1 AC Electrical Characteristics Item HS setup time HS hold time VS setup time VS hold time Data setup time Data hole time DE setup time DE hold time DVDD Power On Slew rate RESET pulse width DCLK cycle time DCLK pulse duty
Symbol Thst Thhd Tvst Tvhd Tdsu Tdhd Tesu Tehd TPOR TRST Tcoh Tcwh
Min. 8 8 8 8 8 8 8 8 1 20 40
Value Typ. 50
Max. 20 60
Min. 26.4 862 1 46 16
Value Typ. 800 33.3 1056 46 210
Max. 46.8 1200 40 46 354
Min. 510 1 23 7
Value Typ. 480 525 23 22
Max. 650 20 23 147
Unit ns ns ns ns ns ns ns ns ms ms ns %
Remark
From 0%~90%
7-2 Timing Item Horizontal Display Area DCLK Frequency One Horizontal Line HS pulse width HS Blanking HS Front Porch
Item
Symbol Thd fclk th thpw Thb Thfp
Symbol
Vertical Display Area VS period time VS pulse width VS Blanking VS Front Porch
Thd Tv tvpw Tvb Tvfp
Date : 2014/4/25
AMPIRE CO., LTD.
Unit
Remark
DCLK MHz DCLK DCLK DCLK DCLK
Unit
Remark
TH TH TH TH TH
16
www.avnet-embedded.eu
7-3 Input Clock and Data Timing Diagram
Date : 2014/4/25
AMPIRE CO., LTD.
17
www.avnet-embedded.eu
8. RELIABILITY TEST CONDITIONS Test Item High Temperature Operation Low Temperature Operation High Temperature Storage
Test Conditions
Note
803C , t=240 hrs -203C , t=240 hrs 803C , t=240 hrs
1,2
1,2 -303C , t=240 hrs -20C ~ 25C ~ 70C 30 m in. 5 min. 30 min. ( 1 cycle ) 1,2 Total 5 cycle
Low Temperature Storage Thermal Shock Test
40 C, Humidity 90%, 96 hrs
Humidity Test
1,2
Sweep frequency : 10 ~ 55 ~ 10 Hz/1min Amplitude : 0.75mm Vibration Test (Packing) Test direction : X.Y.Z/3 axis Duration : 30min/each axis Note 1 : Condensation of water is not permitted on the module.
2
Note 2 : The module should be inspected after 1 hour storage in normal conditions (15-35°C , 45-65%RH). Definitions of life end point :
Current drain should be smaller than the specific value.
Function of the module should be maintained.
Appearance and display quality should not have degraded noticeably.
Contrast ratio should be greater than 50% of the initial value.
Date : 2014/4/25
AMPIRE CO., LTD.
18
www.avnet-embedded.eu
9. General Precautions 9-1 Safety Liquid crystal is poisonous. Do not put it your month. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 9-2
Handling 1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface. 2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages. 3. To avoid contamination on the display surface, do not touch the module surface with bare hands. 4. Keep a space so that the LCD panels do not touch other components. 5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages. 6. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs. 7. Do not leave module in direct sunlight to avoid malfunction of the ICs.
9-3
Static Electricity 1. Be sure to ground module before turning on power or operation module. 2. Do not apply voltage which exceeds the absolute maximum rating value.
9-4 Storage 1. Store the module in a dark room where must keep at +25±10℃ and 65%RH or less. 2. Do not store the module in surroundings containing organic solvent or corrosive gas. 3. Store the module in an anti-electrostatic container or bag. 9-5
Cleaning 1. Do not wipe the polarizer with dry cloth. It might cause scratch. 2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer.
9-5
Others 1. AMIPRE will provide one year warrantee for all products and three months warrantee for all repairing products.
Date : 2014/4/25
AMPIRE CO., LTD.
19
www.avnet-embedded.eu
10. OUTLINE DIMENSION
Date : 2014/4/25
AMPIRE CO., LTD.
20
www.avnet-embedded.eu
Date : 2014/4/25
AMPIRE CO., LTD.
21
www.avnet-embedded.eu
11. EDID TABLE
Date : 2014/4/25
AMPIRE CO., LTD.
22
www.avnet-embedded.eu
Date : 2014/4/25
AMPIRE CO., LTD.
23
www.avnet-embedded.eu
Date : 2014/4/25
AMPIRE CO., LTD.
24
www.avnet-embedded.eu
www.avnet-embedded.eu
AVNET EMBEDDED OFFICES. DENMARK Avnet Embedded Avnet Nortec A/S Ellekær 9 2730 Herlev Phone: +45 3678 6250 Fax: +45 3678 6255 denmark@ avnet-embedded.eu FINLAND Avnet Embedded Avnet Nortec Oy Pihatörmä 1 B 02240 Espoo Phone: +358 20 749 9 260 Fax: +358 20 749 9 280 finland @ avnet-embedded.eu FRANCE Avnet Embedded Avnet EMG France SA Parc Club du Moulin à Vent, Bât 10 33, rue du Dr Georges Lévy 69693 Vénissieux Cedex Phone: +33 4 78 77 13 92 Fax: +33 4 78 77 13 97 bron @ avnet-embedded.eu Avnet Embedded Avnet EMG France SA 14 avenue Carnot 91349 Massy Cedex Phone: +33 1 64 47 29 29 Fax: +33 1 64 47 99 99 paris @ avnet-embedded.eu Avnet Embedded Avnet EMG France SA Les Peupliers II 35 avenue des Peupliers 35510 Cesson-Sévigné Phone: + 33 2 99 77 37 02 Fax: + 33 2 99 77 37 01 rennes @ avnet-embedded.eu ITALY Avnet Embedded Avnet EMG Italy SRL Via Manzoni, 44 20095 Cusano Milanino Phone: +39 02 660 92 1 Fax: +39 02 660 92 498 milano @ avnet-embedded.eu
SOUTH AFRICA Avnet Kopp (Johannesburg) Block 3, Pinewood Office Park, 33 Riley Road, Woodmead P.O. Box 3853, Rivonia, 2128, South Africa Phone: +27 11 319 8600 Fax: +27 11 319 8650 sales @ avnet.co.za Avnet Kopp (Cape Town) Ground Floor, HP House, Belmont Office Park, 14 Belmont Road, Rondebosch P.O. Box 13004, Mowbray, 7705, South Africa Phone: +27 21 689 4141 Fax: +27 21 686 4709 sales @ avnet.co.za Avnet Kopp (Durban) Suite 6, Upminster, Essex Gardens, Nelson Road, Westville P.O. Box 1428, Wandsbeck, 3630, South Africa Phone: +27 31 266 8104 Fax: +27 31 266 1891 sales @ avnet.co.za SWEDEN (NORWAY) Avnet Embedded Avnet Nortec AB Löfströms Allé 5 172 66 Sundbyberg Phone: +46 8 587 46 400 Fax: +46 8 587 46 001 sweden @ avnet-embedded.eu UNITED KINGDOM (IRELAND) Avnet Embedded 5a Waltham Park White Waltham Maidenhead Berkshire, SL6 3TN Phone: +44 1628 518900 Fax: +44 1628 518901 uk@ avnet-embedded.eu
All trademarks and logos are the property of their respective owners. No guarentee as to the accuracy, completeness or reliability of any information. Subject to modifications and amendments.
February 2015
