Transcript
Click on Series name for product info on aimtec.com
Series AM2Q-Z 2 Watt | DC-DC Converter FEATURES: • • • •
• • • •
RoHS Compliant Wide 2:1 Input Range High Efficiency up to 83% Continuous Short Circuit
Operating Temperature -40ºC to 85ºC Input / Output Isolation of 500 VAC No Tantalum Capacitors Used Inside Over Voltage Protection
Models Single output Model
Input Voltage (V)
Output Voltage (V)
Output Current Max (mA)
Isolation (VAC)
4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75
5 12 15 5 12 15 5 12 15 5 12 15
300 130 100 300 130 100 300 130 100 300 130 100
500 500 500 500 500 500 500 500 500 500 500 500
Input Voltage (V)
Output Voltage (V)
Output Current Max (mA)
Isolation (VAC)
4.5-9 4.5-9 9-18 9-18 18-36 18-36 36-75 36-75
±12 ±15 ±12 ±15 ±12 ±15 ±12 ±15
±65 ±50 ±65 ±50 ±65 ±50 ±65 ±50
500 500 500 500 500 500 500 500
AM2Q-0505SZ AM2Q-0512SZ AM2Q-0515SZ AM2Q-1205SZ AM2Q-1212SZ AM2Q-1215SZ AM2Q-2405SZ AM2Q-2412SZ AM2Q-2415SZ AM2Q-4805SZ AM2Q-4812SZ AM2Q-4815SZ
Input Current Full Load | No Load (mA) 410 384 384 166 156 154 84 80 79 43 40 40
60 60 60 50 50 50 40 40 40 30 30 30
Max Capacitive Load (µF)
Efficiency (%)
100 100 100 100 100 100 100 100 100 100 100 100
73 78 78 75 80 81 74 78 79 73 78 78
Max Capacitive Load (µF)
Efficiency (%)
± 100 ± 100 ± 100 ± 100 ± 100 ± 100 ± 100 ± 100
82 81 83 83 81 82 80 79
Models Dual output Model AM2Q-0512DZ AM2Q-0515DZ AM2Q-1212DZ AM2Q-1215DZ AM2Q-2412DZ AM2Q-2415DZ AM2Q-4812DZ AM2Q-4815DZ
Input Current Full Load | No Load (mA) 390 379 160 154 81 78 40 41
60 60 20 30 20 15 10 10
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.
Input Specifications Parameters Voltage range
Nominal
Typical
5 12 24 48
4.5-9 9-18 18-36 36-75 LC Type 20 20
Filter Start up time Input reflected ripple current
www.aimtec.com F 051e R12.F
Tel: +1 514 620 2722 1 of 5
Maximum
Units VDC
ms mA p-p
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
Series AM2Q-Z 2 Watt | DC-DC Converter Isolation Specifications Parameters
Conditions
Typical
60 sec
500 50 500
Tested I/O voltage Resistance Capacitance
Maximum
Units VAC MOhm pF
Output Specifications Parameters
Conditions
Typical
Voltage accuracy Cross Regulation (Dual Output Models)
Over voltage protection
25% load on one output / 100% load on the other output
LL-HL Load:0-100% balanced 20MHz Bandwidth
Units %
±5
%
5 12 15 ±12 ±15 Continuous Auto Recovery ±0.5 ±1 ±0.02 50 0
Zener Diode Clamp
Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Minimum Load Current
Maximum
±1
6.2 15 18 ±15 ±18
V
% of Vin % %/oC mV p-p % of Max
General Specifications Parameters Switching frequency Operating temperature (Dual) Operating temperature (Single) Storage temperature Maximum case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Transient recovery deviation
Conditions
Typical
100% load Derating above 60ºC No Derating
100
Maximum
Units
100
KHz o C o C o C o C
-40 to +85 -40 to +85 -40 to +125 Free Air Convection 95 Nickel Coated Copper 10 1.08 x 0.70x 0.28 inches 27.50 x 18.00 x 7.00 mm >1.6Mhrs ( MIL-HDBK -217F, Ground Benign, t=+25°C ) ±3
% RH g
%
Safety Specifications Parameters Standards
Designed to meet IEC/EN 60950-1
Pin Out Specifications Pin
Single
1 -V Input 2 +V Input 3 +V Output 4 NP 5 -V Output NP: Not Populated
www.aimtec.com F 051e R12.F
Dual -V Input +V Input +V Output Common -V Output
Tel: +1 514 620 2722 2 of 5
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
Series AM2Q-Z 2 Watt | DC-DC Converter Input Reflected Ripple Test Circuit Lin 4.7µH
Vin+
Test Point
+ Cin 47µF
Vin-
-
Vo+
Aimtec DC-DC Converter
RL (Full Load)
Vo-
* Tested at full load, and nominal input
27.50 (1.08)
2.65 (0.10)
Dimensions 21.59 (0.85)
Bottom View
5
6.35 (0.25)
2
6.35 (0.25)
18.00 (0.70)
6.35 (0.25)
1
4 3
6.60 (0.26)
2.50 (0.10)
2.70 (0.11)
4.40 (0.17)
6.35 (0.25)
All dimensions are in milimeters (inches) 1) Pin diameter: 1.0 ± 0.05 (0.04 ± 0.002) 2) Pin pitch tolerance: ± 0.35 (± 0.014) 3) Case tolerance: ± 0.5 (±0.02)
7.00 (0.28)
Built-in Stand-offs to ease PCB Cleaning
Printed Face
2.95 (0.11)
2.95 (0.11) 6.35 (0.25)
Dia 1.00 (0.04)
Derating (Dual output models) Free Air Convection 60º C
Output Power (%)
100 80
Safe Operating Area
60 40 35
20 0 - 40
- 20
0
20
40
60
80
85
100
Ambient Temperature º C
www.aimtec.com F 051e R12.F
Tel: +1 514 620 2722 3 of 5
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
Series AM2Q-Z 2 Watt | DC-DC Converter Typical Efficiency Example Charts
www.aimtec.com F 051e R12.F
Tel: +1 514 620 2722 4 of 5
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
Series AM2Q-Z 2 Watt | DC-DC Converter
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com F 051e R12.F
Tel: +1 514 620 2722 5 of 5
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
