Transcript
AMATS-300
BATS engineers continuously strive to improve all aspects of our products. All specifications are subject to change without notice.
Domed Aiming and Tracking System
The BATS Domed Aiming and Tracking System is a pre-assembled, ready-to-use unit which seamlessly integrates radio, antenna, GPS, and aiming device and is housed in a protective dome for greater reliability. The dome shields the system from temperature extremes and damage from water, salt, sand and other environmental hazards. The Domed Aiming and Tracking System minimizes the technical skills and time required to deploy broadband communications.
It is
preconfigured to automatically initiate a 360 degree scan on power up to quickly locate, lock and track communication access points. The AMATS System uses a GPS-Assisted Gyro Stabilizer System to compensate for vehicular movement,
maximizing
connection
during turns and vertical movements.
stability The
Domed System also has extensive built-in remote
management
capabilities--making
it
operational from anywhere. The BATS AMATS-300 employs the same
Product Specifications PHYSICAL DIMENSIONS
SCAN RANGE
27.5” (Ø) x 28.3” (H)
Pan: 360º Continuous Scanning Tilt: +/- 10º
technological innovation as the AMATS-100, yet harbors a very powerful antenna/radio system
AZIMUTH SPEED
which provides high-bandwidth communications over long distances. The AMATS-300 delivers an
Pan: Up to 20º/sec Tilt: Up to 10º/sec
ENVIRONMENTAL
IP66, Salt Fog
OPERATING TEMPERATURE
-20ºC to 65ºC -40ºC option
uninterrupted high-bandwidth wireless network with moving vehicles up to 100 MB/sec at 40 kilometers, with ample connectivity over 60 kilometers.
WEIGHT
MOUNTING
65lbs Pole Mount
RMCU-2500
BATS engineers continuously strive to improve all aspects of our products. All specifications are subject to change without notice.
Rack Mount Control Unit
Our Rack Mount Control Unit (RMCU) along with our Positioning Units provides a total turnkey solution for all quick deploy and mobile-tofixed
and
mobile-to-mobile
broadband
communication applications.
Product Specifications FULL/QUICK SCAN
The RMCU is designed to automatically locate friendly bandwidth
communication and
links,
signal
optimize
strength
and
TRACKING
User defined fields +/-180° Azimuth and/or +/-20° Elevation for all available friendly communication points, quickly establish link, optimize signal quality and bandwidth. Land/Sea/Air/Vehicle Tracking
subsequently track without any user input (upon power-up).
With significant local and
MASTER/SLAVE
remote management capabilities via secured Internet Protocol the ability to manage the system from your Network Operations Center is assured thus significantly reducing the technical skill sets required.
SELF HEALING
The RMCU comes configured with customer specific Radios along with a large selection of pre-configured
antenna
CONFIGURATIONS
selections.
Radio/antenna combinations are expandable with customer requests. GPS is not an integral
PHYSICAL DIMENSIONS
component of our system therefore it is not provided as a standard product but is available upon customer requests.
WEIGHT
Match Pair System – With limited information as to location of other site, i.e. general direction only (North) systems has the ability to locate and optimize and track communications link in less than 2 minutes (Positioning Unit Dependent)
Primary communications failure system can automatically fail over to secondary targets and re-establish communication links Single radio with user definable multiantenna pre-configured. Customer radio/antenna integrations available.
1.75” (H) x 19” (W) x 13” (D) 10 lbs
Our solution does
not require integration at the data transport level eliminating overhead and/or security
OPERATING TEMPERATURE OPERATING VOLTAGE
issues.
POWER CONSUMPTION
COMMUNICAITON AVAILABLE
0ºC to 60ºC AC: 90-265VAC 47-63Hz Optional: 10-36VDC with/Auto Sense
150 Watts Nominal POE Option: 200 Watts
IP Management (local and remote) Internet Explorer 6.0+,SSH, Telnet
GPS-TS
BATS engineers continuously strive to improve all aspects of our products. All specifications are subject to change without notice.
GPS Targeting Stabilizer
For higher mobility environments or quicker target acquisition, Broadband Antenna Tracking Systems (BATS) can be augmented with our GPS Targeting Stabilizer
(GPS-TS).
enhances
BATS
Targeting),
track
The
ability and
to
GPS-TS initially
optimize
significantly target
(Utilizing
(GPS Vehicle
Stabilization) its communication links. The
GPS
Targeting
Stabilizer
uses
a
Global
Positioning System along with internal stabilization electronics for very fast GPS target acquisition and real-time compensates for azimuth and elevation changes of the vehicle the unit is mounted on. The GPS Stabilizer paired with BATS’ core antenna aiming and tracking technology continually optimizes the connection by maximizing the signal quality between the two points and adjusting for movement of the platform on which the BATS positioning unit is mounted.
The GPS Targeting Stabilizer provides
improved system performance with the ability to
Product Specifications AZIMUTH COMPENSATION ELEVATION COMPENSATION
Global Positioning & Gyros Accelerometers & Gyros
ENVIRONMENTAL
IP66, Salt Fog
OPERATING TEMPERATURE
-20ºC to 60ºC
maintain connectivity in highly mobile environments. The GPS Tracking Stabilizer is ideal for offshore oil
POWER CONSUMPTION
< 6 watts
ADVANCED RECOVERY
Utilizes GPS Target Coordinates for fastest recovery of communication link losses.
and gas exploration / production, maritime, military and emergency responders (ships, trucks, vehicles of any size).
It is compatible with all the BATS standard
product lines.
ADVANCED STABALIZATION
Utilizes Yaw, Pitch, and Roll Information to maintain antenna direction to target even with vehicle/vessel movement.
Stabilization Recovery Specifications
Pulse Supply - www.pulsesupply.com
Positioner
Pan Speed
Tilt Speed
AMATS-100
20º/sec
2º/sec
AMATS-300
10º/sec
5º/sec
BTS-PU25
10º/sec
5º/sec
Toll Free: 1-888-785-7393 - Int'l: 1-951-694-1173
[email protected]
