Transcript
Ambience 5 COMPACT SPEAKER SYSTEM
The ARX Ambience 5 is a high performance 2 way speaker system that provides stunning sound from an easily manageable package with minimal visual intrusion on installation decor. It is made from a durable, yet lightweight high impact resin, and designed with reinforcing ribs and non parallel surfaces to eliminate cabinet resonance and avoid early reflection smearing. Low frequencies are handled by a foam rolled surround 8” (200mm) bass driver, and High frequencies by a soft dome 1” (25mm) HF driver. Both drivers are screwed and sealed for rigid mounting to the front baffle, which is curved for better dispersion. The bass driver has a vented pole piece for optimum power handling and cooling. Frequency management is provided by a 2nd Order 12 dB per octave crossover, internally mounted on a fibreglass printed circuit board. Internal damping to reduce standing waves is provided by Fiberfil filling, and the cabinet is vented for optimum bass performance. Connectors are push terminal as standard, which allows for completely flush mounting
against walls, and a moulded-in carrying handle makes transportation a breeze. Its light weight means that the Ambience 5 can easily be mounted out of the way of sightlines. A mounting plate included with each Ambience 5 lets you install it either tweeter up or tweeter down depending upon the application. The mounting bracket bolts on to the cabinet via 2 sets of threaded holes rear face. And, because we know what conditions professional speakers have to endure, we’ve protected the front of the cabinet with a sturdy steel mesh grille, not fragile cloth. For installers, the matte finish of the cabinet means that its neutral dark colour (or white - see options at right) will blend neatly in with existing decor, and can also be easily painted for applications that require complete colour coordination. Summing it all up, the ARX Ambience 5 is a speaker system of breathtaking realism, suitable for the most demanding applications.
• Installations • AV • Multimedia
Ordering Options AMB5–8 8 ohm, standard terminals Add the suffix W for WHITE cabinet colour.
Ambience 5 Specifications Each Ambience 5 cabinet comprises 1 x 8" (205 mm) Low Frequency driver and 1 x 1” (25mm) soft dome High Frequency driver, in an optimally vented GRP resin enclosure. Frequency Response 50Hz-20KHz ±5 dB Impedance Standard 8 ohms (see above for options) Long/Short Term Power 150W / 225W Sensitivity @ 1 Watt, 1 Metre 89dB Maximum SPL @ 1 Metre 115 dB Crossover Frequency 2.5 KHz Connectors Push Terminals o Dispersion 120 V x 120o H, –6db down MaximumDimensions 400H x 260W x 220mmD Weight 6.5 Kg each
INSTALLING THE AMBIENCE 5 Steel plate slides in here
AMBIENCE 5 MOUNTING
ARX Ambience 5 speakers are designed to be installed in a vertical position, with the bracket attached through the metal plate that slides into the inner surface of the top and bottom handle recesses. Care must be taken to ensure that the surface to which they are to be mounted is capable of supporting the weight of the Ambience 5. In a brick/concrete wall, make sure that suitable anchor bolts are used. In a plasterboard/drywall installation, it is
important to ensure the mounting fasteners are screwed through the plasterboard surface to the supporting stud or beam underneath. We recommend using the ARX +15 Kg mounting bracket (Bracket 2) or a similar model from a 3rd party supplier, e.g. Omnimount or similar. Please note that non-ARX brackets may require extra installation time and preparation due to their differing non-standard mounting holes.
PUSH IN AND THEN DOWN
B
STEP 1:
Attach the mounting plate P to the speaker box using machine screws and shakeproof washers
STEP 2:
Attach the mounting bracket part A to the wall using 2 suitable fasteners
STEP 3:
Push the 4 circular connectors on bracket part B into the corresponding holes in bracket part A, and push down
A
C
STEP 5:
If required for security a self tapping screw can be screwed vertically into ledge L to lock both parts together
STEP 4:
Adjust the angle as required and then tighten the 3 recessed hex head adjustment bolts C with an allen key
L
INTERNAL VIEW
B
P
EXTERNAL VIEW WITH MOUNTING PLATE P ATTACHED
ARCHITECTS’ SPECIFICATIONS
The Standard Input is used for fixed installations, with push terminal bare wire connections. Impedance is 8 ohms.
AMBIENCE 5 REAR PANEL LABEL
The loudspeaker system shall be a two way system constructed from high impact injection moulded resin and shall have integral mounting points. Drivers shall be a 205 mm (8") low frequency driver and a 25 mm (1") high frequency driver. The low and high frequencies shall be integrated by a twelve dB per octave crossover network. Sensitivity measured on axis @ 1 metre shall be 89 dB. Frequency response measured @ 1 metre on axis shall be 50Hz - 20kHz ±5db. Maximum SPL @ 1 metre on axis shall be 115 dB. Dimensions shall be 16"H x 10"W x 9"D (400H x 260W x 220D mm) and it shall weigh 6.5 kgs (14 lbs) (Ambience 5: 8 ohm version) Rated impedance of the loudspeaker system shall be 8 ohms. The loudspeaker system shall be the ARX Ambience 5 - 8.
Latest updates available at: www.arx.com.au/ambience5.htm Our policy is one of continuous improvement, and therefore designs may change without notice. However, unless otherwise stated, specifications will always equal or exceed those previously given.
ARX Systems Pty Ltd; PO Box 15, Moorabbin, Victoria 3189, Australia Phone: 03 9555 7859 Fax: 03 9555 6747 International Fax +61 3 9555 6747 Email:
[email protected] Internet: www.arx.com.au
©2007 ARX Systems Pty. Ltd. ACN 006 471 825. All rights reserved. ARX Systems® is a Registered Trade Mark
