Preview only show first 10 pages with watermark. For full document please download

Amp3047p Solid State High Power Amplifier

   EMBED

Share

Transcript

AMP3047P SOLID STATE HIGH POWER AMPLIFIER FEATURES Ruggedized, compact Class AB high power pulse SSPA designed for high reliability TACAN, IFF and applications such as Secondary Surveillance Radar (SSR) applications, IFF Modes 1, 2, 3/A and Mode C. Standard features include protection against over-temperature, excess VSWR, excess modulation (pulse width and duty cycle). An internal capacitive bank provides low output droop over extended pulse widths. Input pulse trigger is accomplished through TTL compatible level signals. ELECTRICAL SPECIFICATIONS Parameter Operating Frequency Power Output Peak Pulse Power Gain Power Gain Flatness Specification 1025 - 1150 MHz 2000 Watt Min 63 dB Min 1.5 dB p-p Width (tp) Duty (δ) Rise / Fall 5 µSec 4% 100 nSec -14 dB Min -150 dB/Hz Typ 20 dB Max AB/C 50 VDC Nom 7 Amp Ave. Max -40 dBc Max +3 dBm ∞:1 Pulse Characteristics Input Return Loss Noise Mute Level Noise Figure Class of Operation Operating Voltage Current Consumption Harmonics Max Input Power Protection Load VSWR Protection ENVIRONMENTAL CHARACTERISTICS Parameter Operating Case Temperature Storage Temperature Relative Humidity MECHANICAL SPECIFICATIONS Parameter Dimensions Weight RF Connectors In/Out DC Power / Interface Connector Cooling Notes Pulse @ 4% duty cycle Droop 1 dB Max Specification 0 to + 50 °C -40 to +85 °C 0 to 95 % Specification 420 x 280 x 41 mm TBD SMA female / Type N female 7 Pin Hybrid D-Sub External Heatsink AMP3047P -DAT-V1.0 - 04-2017 © 2014 Exodus Advanced Communication [email protected] • WWW.EXODUSCOMM.COM Relative to 50 Ohm LDMOS transistors design At rated Pout <10 Sec At rated Pout for <1 Min Note Non Condensation Notes Excluding Heatsink Forced air required @ 2% DS AMP3047P SOLID STATE HIGH POWER AMPLIFIER D-SUB CONNECTOR PIN ASSIGNMENT Pin Function A1 VDD 1 N/C 2 N/C 3 CURRENT MONITOR 4 TEMP MONITOR 5 SHUTDOWN A2 GND Description +50VDC Reserved Reserved ID@20mV/100mA Typ VT@10mV/C + 500mV Typ TTL “Hi” = Disable Function @ 50mS (Option: 5uS Trigger/Pulse Modulator) Ground OUTLINE DRAWING AMP3047P -DAT-V1.0 - 04-2017 © 2014 Exodus Advanced Communication [email protected] • WWW.EXODUSCOMM.COM