Transcript
AMP4019 SOLID STATE HIGH POWER AMPLIFIER
FEATURES Rack mounted system Class AB Solid-State linear Hybrid design Instantaneous wide bandwidth Suitable for all modulations standards Built-in protection circuits High reliability and ruggedness ELECTRICAL SPECIFICATIONS Parameter Operating Frequency Range Power Output Power Gain Power Gain Flatness Input / Output Return Loss 2-Tone Intermodulation (IMD) Harmonics Non Harmonics Spurious Operating Voltage Power Consumption Max Input Power Load VSWR Protection
Specification 8.0 - 12.0 GHz 50 Watt Min 47 dB Min 3 dB p-p Max 10 dB Min >30 dBc Min >20 dBc Typ 60 dBc Min 100 - 240 VAC 400 Watt Max +8 dBm 5:1
ENVIRONMENTAL CHARACTERISTICS Parameter Operating Ambient Temperature Storage Temperature Relative Humidity
Specification 0 to +50 °C -40 to +85 °C 5 to 95 %
MECHANICAL SPECIFICATIONS Parameter Dimensions W x H x D Weight RF Connectors In / Out AC Power / Interface Connector Cooling OPTIONAL: Digital Monitor & Control FWD, REV, VSWR, GAIN, ALC, V & I, TEMP
Specification 430 x 560 x 133 mm 20 kg. Type-N Female IEC 60320-C14 / 9-Pin D-Sub Built in Fan Cooling Ethernet RJ-45 TCP/IP, RS422/485, Optional GPIB Interface
AMP4019-DAT-V1.X - 06-2015 © 2014 Exodus Advanced Communication
[email protected] • WWW.EXODUSCOMM.COM
Notes CW Constant input power Relative to 50 Ohm 37dBm/Tone, Δ = 1MHz At rated output power
At rated Pout Without damage
Notes
Non Condensation
Notes 3U - Without handles Front Panel Standard Variable speed Remote Bluetooth application
AMP4019 SOLID STATE HIGH POWER AMPLIFIER
OUTLINE DRAWING
AMP4019-DAT-V1.X - 06-2015 © 2014 Exodus Advanced Communication
[email protected] • WWW.EXODUSCOMM.COM
