Transcript
Amplifiers and Modulators Premium range of UHF and combination mast head and house distribution modulators and amplifiers to suit all needs. Matchmaster’s range of mast head modulators and amplifiers have 694MHz built in low pass LTE/4G filters to reduce interference from 4G mobile transmissions.
Products may vary from photo shown | www.matchmaster.co.nz 21
Amplifiers and Modulators Modulator Terra DSB Mono 85dBµV Agile
Modulator TERRA DSB Stereo 85dBµV
10MM-MT47
10MM-MT57
Features and Benefits
Features and Benefits
»» Built-in test pattern generator (TPG)
»» Built-in test pattern generator (TPG)
for video and audio
for video and audio
»» Frequency agile double sideband
»» Frequency agile double sideband
multi standard TV modulators
multi standard TV modulators
»» Adjustable audio input level and RF output level »» Protection from unauthorised access »» Connectors: RCA sockets for audio/video and 'F' female for RF output
10MM-MT47 Specifications RF Output Level (Typical) Level Adjustment Frequency Range*SC Combining Through Loss TERR/SAT Frequency Range of RF Combining Signal/Noise Ratio Power Consumption Operating Temperature
»» Adjustable audio input level and RF output level »» Protection from unauthorised access »» Connectors: RCA sockets for audio/video and 'F' female for RF output
85dBµV 0 ÷ -20dB 170-300MHz, 470-862MHz 1.5dB/2.5dB 5-2150MHz �55dB 230V - 50Hz 2.5W -10°C - +50°C
Modulator Matchmaster 3 x AV-RF DSB Mono, 85dB Agile
10MM-MR03 Features and Benefits
»» Converts 3 x AV signals to 3 x Analogue RF channels
»» All RF channels are individually adjustable »» Output gain adjustable »» Comes with AV leads »» Easy to configure with front panel operation
22 www.matchmaster.co.nz | Products may vary from photo shown
10MM-MT57 Specifications RF Output Level (Typical) Level Adjustment Frequency Range*SC Combining Through Loss TERR/SAT Frequency Range of RF Combining Signal/Noise Ratio Power Consumption Operating Temperature
85 ± 3dBµV 0 ÷ -20dB 170-300MHz, 470-862MHz 1.5dB/2.5dB 5-2150MHz �55dB 230V - 50Hz 2.5W -10°C - +50°C
Amplifiers and Modulators CVBS to COFDM Modulator
HDMI To DVB-T Modulator
14MM-DM04
14MM-DM06
Features and Benefits
Features and Benefits
»» 1 x RCA input »» Standard Definition digital modulation »» Allows audio/video signal input to TV distributions »» Can be used with home entertainment systems,
»» LED display and push buttons control
surveillance control, hotel digital signage, shops etc
of internal microprocessor
»» Adjustable RF output level
»» Loop through RF combined
»» Wall mounting »» Mains 230 AC adapter in delivery 14MM-DM06 Specifications Input Signal Type Video Input Video Coding
14MM-DM04 Specifications Video Encoding MPEG-2 MP@ML(4:2:0) Video Interface CVBS*1 720x576_50i (PAL); Video Resolution 720x480_60i Video Bit Rate 1.000-19.500 Mbps Audio Encoding MPEG1 Layer II Audio Interface 1*Stereo/Mono Audio Resolution 48KHz 64, 96, 128, 192, 256, Audio Bit Rate 320, 384kbps Modulator Section DVB-T COFDM Standard Bandwidth 6M, 7M, 8M Constellation QPSK, 16QAM, 64QAM Code Rate 1/2, 2/3, 3/4, 5/6, 7/8 Guard Interval 1/32, 1/16, 1/8, 1/4 Transmission Mode 2K MER �42dB RF Frequency 30-960MHz, 1KHz step -16 - -36dBm (73RF Output Level 93dBµV), 0.1dB step Local Control; LCD + System Management Control Buttons Language English LCN Insertion Yes Upgrade JTAG or USB Power Supply DC 12V Operating Temperature 0˚-45˚C
Audio Input
Resolution Input Signal Type Standard
HDMI MPEG-4 AVC/H.264, High profile 4.0 920x1080-30p HDMI
MPEG-1 Layer II 64, 96, 128, 192, 256, Audio Bit Rate 320, 384 kbps Standard MPEG-4 AVC/h.264 Bit Rate 1-19 Mb/s adjustable H.264 Service Name, Service Configurable Encoder ID, Video PID, Audio Parameters PID, PMT PID, PCR PID Automatic NIT, PAT, CAT, SDT, Regeneration PMTs, EITs tables Transport TS ID, Original Stream Configurable Network ID, Network Processing Parameters ID, Provider Name LNC support Yes Standard EN 300 744 MER 35 dB Modulation QPSK, QAM16, QAM64 Channel 5/6/7/8MHz Bandwidth Modulation Guard Interval 1/4, 1/8, 1/16, 1/32
RF Output
Code Rate Transmission Shoulder Attenuation Frequency Range Level/ Impedance Output Level Adjustment Combining Through Loss
Current Consumption Operating Temperature
1/2, 2/3, 3/4, 5/6, 7/8 2K/8K >45dB 174-862 MHz by 1Hz step 90 dBµV/75 Ohm 0 ÷ -20dB <1 dB 12 V 0.4 A max. 0°C - +50°C
Products may vary from photo shown | www.matchmaster.co.nz 23
Amplifiers and Modulators TERRA Twin AV to DVB-T Modulator with Power Pack
14MM-MDX420K Features and Benefits
»» AV - DVB-T stand-alone modulator »» PSI generation: SDT, NIT, LCN »» Adjustable RF output level and audio input level »» Loop Through RF combining »» Low level harmonics and intermodulation
14MM-MDX420K Specifications Frequency Range 20Hz - 6MHz Video Input Level/Impedance 1 V ± 0.1 V/75Ohms Frequency Range 20Hz - 15kHz Level/Impedance 775mV/10kOhms Audio Input 6 - -6dB Level Adjustment (2dB step) ISO/IEC13818-2 Encoding MPEG-2 MP@ML 720 x 576 (at 25 Resolution fps), 720 x 480 (at Processing 30 fps) 25 max. PAL, Video Frame Rate SECAM, 30 max. NTSC Compressed 2-9 Mbps System Bit Rate ISO /IEC11172-3 Encoding (MPEG1 audio) layer Processing 2 compliant Audio Sampling Rate 44.1kHz Bit Rate 256Kbps Audio Mode Stereo MER ≥35 dB QPSK, QAM16, Modulation QAM64 Channel 7/8MHz Bandwidth Modulation Guard Interval Code Rate
RF Output
Transmission Frequency Range Level/Impedance Output C/N Output Level Adjustment Frequency Range of RF Combining DC Pass Through Combining Through Loss Terr/SAT Return Loss
Current Consumption
24 www.matchmaster.co.nz | Products may vary from photo shown
1/4, 1/8, 1/16, 1/32 1/2, 2/3, 3/4, 5/6, 7/8 2K 110 - 860MHz 85 dBµV/75 Ohm ≥50dB 0 - -15.5dB by 0.5dB step 47-2150MHz 0.3 A 1.5/2.5dB ≥10dB 12 V 0.65 A
Amplifiers and Modulators Dual HDMI to COFDM MPEG2/4 Modulator Rack Mount
Quad HDMI to COFDM MPEG2/4 Modulator Rack Mount
14MM-DD2HD-R
14MM-DD4HD-R
Features and Benefits
Features and Benefits
»» 2 HDMI inputs and outputs 1 RF channels
»» 4 HDMI inputs and outputs 2 RF channels
and 1 UDP IP port
and 2 UDP IP port
Specifications Product Code Video Input Video Resolution Audio Encoding Audio Sample Audio Bit Rate Standard FFT Model Bandwidth Constellation Guard Interval FEC MER RF Frequency RF Out RF Output Level Local Interface Remote Management Ouput Power Supply
14MM-DD2HD-R
14MM-DD4HD-R
HDMI*2 HDMI*4 1920x1080_60P, 1920x1080_50P, (-for MPEG4/H.264), 1920x1080_60i, 1920x1080_50i, 1280x720_60p, 1280x720_50p MPEGI Layer II, (MPEG2-AAC, MPEG4-AAC available) 48KHz 64bps, 96kbps, 128kbps, 192kbps, 256kbps, 320kbps EN300744 2k, 8k 6M, 7M, 8M QPSK, 16QAM, 64QAM 1/4, 1/8, 1/16, 1/32 1/2, 2/3, 3/4, 5/6, 7/8 42dB 30-960MHz, 1KHz step 2*RF COFDM DVB-T Out 1* RF Output (2 carriers combined output) -30 - -10dBm (81-97dBµV), 0.1dB Step LCD + Control Buttons Web NMS 1*MPTS out (RJ45, 100M) 2*MPTS Out (RJ45, 100M) AC 100V-240V
Products may vary from photo shown | www.matchmaster.co.nz 25
Amplifiers and Modulators TERRA 5-input Terrestrial Amplifier 40dB
Amplifier with 30MHz Return Path
14MM-MA202
14MM-HA205R30
Features and Benefits
Features and Benefits
»» Splitband FM+VHF and UHF amplifiers »» Gain level control with interstage amplifiers
»» High power floor distribution amplifier with
and attenuators
»» Protection and indication of DC overload »» Switchable +12V DC feeding for preamplifiers through all inputs
47~862MHz output 109dBµV
»» Return path 5~30MHz »» Slope adjustment for cable compensation »» Switchable gain 27dB or 36dB to set output of the amplifier to your design requirements
»» Built-in test points »» Die-cast housing
»» Weatherproof and RF screen die cast housing »» Ga-As push pull amplification for low distortion
14MM-MA202 Specifications FM 30dB (88-108 MHz) VHF 40dB (47-68 MHz) VHFIII 40dB (174-260 MHz) Gain UHF 2 x 47dB (470-862 MHz) UHFV (614-862 MHz) UHFIV (470-590 MHz) Number of Inputs 5 Noise Figure, <5dB (VHF); <4dB (UHF) Typical Maximal Output Level IMD3=60dB VHF 118 dBµV; UHF 121 dBµV (DIN45004B) Attenuator 0 ÷ -20dB Gain Control Switch 0 ÷ -10dB Return Loss >10dB External DC 12V 0.1 A Max Feeding Power < -60dB Consumption Power 230V - 50Hz 9.5W Consumption Operating Temperature -20° - +50°C Range Dimensions/ 265x175x60mm/1.1kg Weight (Packed)
14MM-HA205R30 Specifications Forward Path Frequency Range 47-862MHz Gain Switchable 27/36dB Gain Adjustment 18dB Slope Adjustment 18dB Interstage Equaliser -6/-3/0dB Flatness ±0.75dB Input & Output >14dB at 40MHz; -1.5dB/ Return Loss oct, but Not Less 10dB Output Level CTB, CSO 109dBµV (EN50083-3) Noise Figure 8dB Test Points Attenuation -20dB Return Path Frequency Range 5-30MHz Gain Switchable 27/-4dB Gain Adjustment 18dB Input Attenuator -10/0dB Output Equaliser -6/-3/0dB Flatness ±0.75dB Return Loss >14dB 7dB (Active, 0dB Input Noise Figure Attenuator) Maximum Output Level IMD3=60dB 115dBµV (DIN45004B) General Power Supply 230V 50Hz 7.5W Operating Temperature -20°C - +50°C
26 www.matchmaster.co.nz | Products may vary from photo shown
Amplifiers and Modulators Amplifier 39dB Forward Gain 5-30MHz Passive Return
14MM-BA213U Features and Benefits
»» High output amplifier capable of high channel loads »» Ga-As push pull amplification for low distortion »» Variable gain control to set output of the amplifier and slope adjustment for cable compensation
»» Includes Passive Return Path module »» Diecast housing for high RF screening
14MM-BA213U Specifications Forward Path* Return Path* Forward Path Gain** Return Path Gain Flatness*** Gain Adjustment Slope Adjustment Typical Inverse Cable Equaliser Output Level CTB, CSO (EN50083-3)**** Input and Output Return Loss***** Noise Figure Test Points Attenuation Mains Powering Operating Temperature Range
47-862MHz 5-30MHz 39dB -2.5dB ±0.5dB 20dB 18dB 0-9dB in 1dB Step -20dB >14dB <7dB -20dB 230V ~ 50Hz 11W -20°C - +50°C
* Depends on plug-in modules: return path passive pd 02-xx or active pr 02-xx (return path modules should be ordered separately) ** With link 0dB instead of interstage attenuators are supplied in scope of the amplifier delivery *** For amplifier with return path - ±0.7dB **** Measured with 6dB interstage equaliser ***** When f�40MHz, return loss �14dB (40MHz) - 1.5dB/octave, but not less 10dB
Active Return Path Module for 14MM-BA213U
14MM-PR02-30 Features and Benefits
»» Used for TERRA BA series broadband amplifiers »» Allows for shaping the characteristics of the
14MM-PR02-30 Specifications Return Path Frequency Range Forward Path Return Path Gain Forward Path Output Level IMD3=60dB Gain/Slope Adjustment Noise Figure
5-30MHz 47-862MHz 21dB -1dB 113dBµV 20dB 4dB
amplifier in the return path
Products may vary from photo shown | www.matchmaster.co.nz 27
Amplifiers and Modulators Amplifier SAT 35-45DB Televes
14MM-SA45
14MM-SA45 Specifications Frequency Range Gain (dB) Attenuator (dB) Equalizer (dB) Noise Figure (dB)
Features and Benefits
»» 45dB gain for Satellite »» Combines Terrestrial »» Powers LNB »» 20dB adjustment »» 30dB test port »» Mains power
Max. Output Level TEST Socket (dB) Working Temperature Mains Voltage (V) Automatic DC Bypass Max. Output DC for LNB 22KHz Amplitude Tone Protection Level
Amplifier Satellite 18dB Inline 950-2050MHz
95047-862MHz 2150MHz 35-45 -1.5 0-20 0-12 10 typical 124 typ. (DIN V VDE 0855/12) -30 -10° - 45°C 198-264 300mA 0.6 ± 0.1 Vpp IP20
Satellite/Terrestrial Amplifier 42dB Sat. 53dB Ter.
10MM-SA18
14MM-ST45
Features and Benefits
Features and Benefits
»» Maximum output of 105dBµV at 35dB IMR. »» Frequency range 950-2050MHz »» Passes both DC and 22KHz »» The satellite amplifier is a fully screened remote
»» Test port on IN/OUT »» Attenuation SAT/TER »» Equalisation SAT/TER
powered device which will work in a voltage range of 12-18V DC
10MM-SA18 Specifications No. of Inputs No. of Outputs Gain Input Return Loss Output Noise Figure Gain Adjust VHF Maximum Output At 351MR VHF Screening UHF Input/Output Impedance Power Source Power Consumption
1 ‘F’ Type 1 ‘F’ Type 18 ± 1.5dB 5dB 4dB 5dB 13-20dB 105dBµV >75dB >65dB 75� 15VDC±3 IW
28 www.matchmaster.co.nz | Products may vary from photo shown
14MM-ST45 Specifications MATV Frequency Range 47-862MHz 87-862MHz Adjustable Gain 40-53dB FI Frequency Range 950-2150MHz Gain 42dB Output Level 121 dBµV (EN50083) Return Path Frequency Range 5-30MHz 5-65MHz Gain Active/Passive dB 20/-4 Output Level (DIN4500) 115 dBµV Powering (VAC) 196-264 Dimensions 158x102x51mm
Amplifiers and Modulators Satellite/Terrestrial Amplifier 31dB Sat. 24dB Ter. Passive 30MHz Return-path
14MM-HSA100R Features and Benefits
»» Amplifies both Satellite and Terrestrial services »» Terrestrial stage can be switched to passive if it is not needed
»» DC power pass through, allows power to be passed to an LNB or masthead amplifier
»» Independant gain and slope adjustment available for both satellite and terrestrial bands
»» Ventilated power-supply section allowing for greater heat dissipation and a longer MTBF when compared to other amplifiers 14MM-HSA100R Specifications Forward Path Frequency Range 950-2400MHz SAT IF Frequency Range 47-862MHz TERR TV Gain SAT IF 23-31dB Gain TERR TV 21-24dB Gain Adjustment SAT IF 10dB Gain Adjustment 18dB TERR TV* Slope Adjustment 14/8dB Switchable SAT IF Slope Adjustment 18dB TERR TV* Input and Output Return >7dB Loss SAT IF Input and Output Return >10dB Loss TERR TV Max Output Level IMD3=60dB 115dBµV (DIN45004B) TERR TV Noise Figure SAT 8dB IF/TERR TV General Mains Power 230V-50Hz 7.5W Consumption Temperature Range -20°C - +50°C Dimensions/Weight 185x91x47mm/0.7kg * Terrestrial gain, slope adjustment and return path are not available in passive terrestrial TV mode
Amplifier UHF 4G Filter Super Low Noise
10MM-J25SLN Features and Benefits
»» Industry standard ‘F’ connectors »» Black UV stabilised cable tie for easy installation and long life
»» Non-corrosive circuit board with high quality components
»» U/V stabilised weather proof housing
10MM-J25SLN Specifications Frequency Range Gain Noise Figure Maximum Input Level Maximum Output Level Consumption
520-694MHz 10-25dB 1.5dB 85dBµV 105dBµV 55mA/14VDC
Products may vary from photo shown | www.matchmaster.co.nz 29
Amplifiers and Modulators Amplifier 4G VHF/UHF with Power Supply
10MM-MD15P Features and Benefits
»» Use with a combination antenna »» CH 4-11 + 21-46 »» Filter attenuation @ 720MHz: 19dB, @ 750MHz: 30dB
»» Includes 14VDC power supply and cable ties for mounting
»» Passive VHF passing or combining with 1.5dB max insertion loss
DC-Pass/Adaptor - Lead
10MM-DC-PASS Features and Benefits
»» Allows bypassing of voltage around non-power pass products
»» Used to inject and extract voltage »» Contains 2 x Injectors and 300mm lead
Masthead Amplifier UHF 24dB - 4G Filter and Power Supply
10MM-MD24UP Features and Benefits
»» 694MHz built in 4G low pass filter »» Switchable 694MHz low pass filter »» Gain with LTE filter 694MHz 24dB »» VHF switch diplexing max attenuation 2.84dB at 230MHz
»» Heavy duty clamping system »» Power supply included
10MM-MD24UP Specifications UHF Gain BIII Return Loss Noise Impedance Operating Voltage Operating Current Output Level for dB Gain Amplifier (Definition per ENBS50083-9 Standard) DC Powered Housing Connector Working Temperature
30 www.matchmaster.co.nz | Products may vary from photo shown
25dB -2±1.5dB �-10dB 5.5dB 75� 24VDC 65±10mA �98dBµV 14VDC Nickle Plated 75�, Female ‘F’ Type -20°C - +60°C
Amplifiers and Modulators Amplifier 2 Way 4G LTE Filter
10MM-MA22FL Features and Benefits
»» Ideal for TV and FM signals to be split to 2 TV's »» 2 Way UHF/VHF amplifier with integrated power 1 input 2 outputs
Digital Amplifier Sat/Ter 4 Way Splitter Amp with Backfeed and 4G Filter
10MM-DDA24 Features and Benefits
»» Frequency range 40-694MHz »» 4G LTE filter low pass 694MHz »» 3 x A3 female IEC adaptors »» 15dB ± 3dB Gain
»» 1-2 Switchable Inputs »» Frequency range 47-2150MHz »» Includes power supply »» 4 Outputs
Digital Amplifier Sat/Ter 8 Way Splitter Amp with Backfeed and 4G Filter
Digital Amplifier Sat/Ter 8 Way Splitter Amp with Backfeed and 4G Filter
10MM-DDA28
30MM-DDA28
Features and Benefits
Features and Benefits
»» 1-2 Switchable Inputs »» Frequency range 47-2150MHz »» Includes power supply »» 8 Outputs
»» 1-2 Switchable Inputs »» Frequency range 47-2150MHz »» Includes power supply »» 8 Outputs »» Hub friendly
Products may vary from photo shown | www.matchmaster.co.nz 31
Amplifiers and Modulators Sat Multi-switch 5 x 8 with Tone Remote
10MM-MST08 Sat Multi-switch 5 x 8 with Tone Remote + Power Supply
10MM-MST08P Features and Benefits
»» 4 x Satellite, 1 x Terrestrial inputs »» For star distribution for 8-outlets »» Voltage and tone switching from inputs »» Powered from any output “remote-powering” »» Designed for New Zealand use 10MM-MST08 Specifications Frequency Response
Isolation
Insertion Loss Return Loss Max. Output Level
TER to SAT SAT to TER Cross polar. H/V 47-862MHz OUT-OUT 950-2150MHz TER 47-862MHz SAT 950-2150MHz SAT/TER/BF Input SAT/TER/BF Output TER SAT
Switching Commands Switching Voltage Frequency Range of 22KHz Tone Level of 22KHz Tone LNB Power Supply Power Consumption
32 www.matchmaster.co.nz | Products may vary from photo shown
Typical QC Limit 47-2150MHz 23dB ≥ 20dB 23dB ≥ 20dB 25dB ≥ 23dB 28dB ≥ 23dB 30dB ≥ 24dB 0dB ≤2dB 0dB ≤2dB 10dB ≥ 8dB 8dB ≥ 6dB 88dBµV ≥83dBµV 97dBµV ≥92dBµV 13V, 18V, 13V/22KHz, 18V/22K
