Preview only show first 10 pages with watermark. For full document please download

An Information Sheet - Paslode New Zealand

   EMBED

Share

Transcript

IMPULSE FRAMEMASTER NAILER FEATURES • Impulse Gas Technology Portable, no need for a compressor or hoses • Tool Free Depth of Drive Adjustment Five notch adjustment For accurate nail placement • 50 to 90mm Nails Full range of 50 to 90mm nails in bright, galvanised, and stainless steel • Nail Lock Out Bar Protects timber and tool • Ergonomic Design Operator friendly, non-slip handgrip and trigger improves comfort and safety • Skew Nailing Teeth Helps to grip the timber to ensure positive placement of the fastener • Low Tool Actuation Pressure Reduces operator fatigue • Reversible Belt / Rafter Hook Increased convenience and safety Product Code Model Description B20540 IMPULSE FRAMEMASTER FRAMING NAILER Barcode 9315104013612 (Note: This Product information sheet is not intended for distribution to end users) – B20540 FrameMaster 06/09 v1 READ ALL SAFETY INSTRUCTIONS IMPULSE FRAMEMASTER NAILER Specifications Product Size (WxHxD) Packaged Size (WxHxD) Tool Weight (with battery) Packaged Weight 368 x 310 x 100mm 450 x 450 x 140mm 3.4kg 5.9kg Quantity Per Pack 1 Cycle Rate 2-3 Nails per second Tool Duty Cycle Rate 1000 Nails per hour Magazine Capacity 40 Nails Nail Range Length Nail Range Diameter 50 - 90mm 2.87 – 3.15mm Battery 6 Volt DC (B20544E) Battery Recharge Time 1.5 to 2 hours Fuel Cell Impulse – Twist n Lock - In Can – Long Fuel Cell Propellant Liquid Hydrocarbon Fuel Cell & Battery Storage Temperature Below 49o Celsius Rated Input Voltage Battery Charger Base 12 Volt DC 800mA Rated Output Voltage Battery Charger Base 6 Volt DC 750mA Rated Input Voltage Power Adaptor 240 Volt AC 50/60 Hz Rated Output Voltage Power Adaptor 12 Volt DC 800mA CAPACITY Battery Capacity Up to 4,000 Nails per charge Fuel Cell Capacity Up to 1,200 Nails per charge Information presented in this product information sheet is believed to be accurate and reliable, no responsibility for inaccuracies can be assumed by Paslode. Paslode reserves the right at any time to change performance characteristics without prior notice. Paslode NZ a division of ITW New Zealand Limited, 38 Canaveral Drive, Albany, Auckland. P.O. Box 100 303, North Shore Mail Centre, Auckland (Note: This Product information sheet is not intended for distribution to end users) – B20540 FrameMaster 06/09 v1 READ ALL SAFETY INSTRUCTIONS