Transcript
ANI-0108HC HDMI 8 Ports Splitter Amplifier by CAT5 x1 INSTRUCTION MANUAL
TABLE OF CONTENTS CONTENTS
SAFETY PRECAUTIONS
Package Contents .............................................................. 1
Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:
Features ............................................................................. 2
• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Specifications ..................................................................... 2
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
Introduction ........................................................................1
• Never spill liquid of any kind on or into this product.
Panel Descriptions .............................................................. 3
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
Connection and Operation ................................................... 4
• Do not attach the power supply cabling to building surfaces. • Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. • To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
INTRODUCTION
DISCLAIMERS
This HDMI Splitter is an HDMI splitter with eight RJ45 outputs. It distributes the input of the HDMI signal into the eight identical outputs simultaneously. Eight HDMI Extender Receivers by CAT5 x1 receive the distributed signal from the splitter and transmit to displays individually.
The information in this manual has been carefully checked and is believed to be accurate. We assume no responsibility for any infringements of patents or other rights of third parties which may result from its use. We assume no responsibility for any inaccuracies that may be contained in this document. We make no commitment to update or to keep current the information contained in this document.
Each receiver works with the splitter as a full functional module. Only buy the most inexpensive UTP cable with cross stand inside the full functional module extend to the HDTV display up to 165 feet for 1080p.
We reserve the right to make improvements to this document and/ or product at any time and without notice.
This HDMI Splitter offers solutions for HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
COPYRIGHT NOTICE No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means — electronic, mechanical, magnetic, optical, chemical, manual, or otherwise — without express written permission and consent
PACKAGE CONTENTS Before attempting to use this unit, please check the packaging
© Copyright 2011. All Rights Reserved.
and make sure the following items are contained in the shipping carton:
Version 1.1 MAY2012
• HDMI 8 Ports Splitter Amplifier • Users Manual
TRADEMARK ACKNOWLEDGMENTS
• Eight Receivers
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.
• Nine pieces of 5V DC@ 2A Power Supply (one 5V@4A, eight 5V@2A)
1
FEATURES & SPECIFICATIONS FEATURES This HDMI Splitter has many features that enable it to perform in a superior manner. Among those features you will find: • Easy to Use: Install in seconds. • One pair as a full functional module. • One piece of CAT5e/6 cable can substitute HDMI cable to achieve long distance transmission. • Follows the standard of IEEE-568B. • Transmission distance can be up to 165 feet for 1080p using UTP cable with cross stand inside. • Supports HDMI1.2a. • Supports highest video resolution 1080p. • Supports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth. • Supports 8bit per channel (24bit all channel) deep color. • Supports uncompressed audio such as LPCM.
SPECIFICATIONS Signal Inputs/Output • Input DDC Signal • Maximum Single Link Range • Output Video
5 volts p-p (TTL) 1920 x 1080p HDMI 1.2a
Operating Frequency • Video Amplifier Bandwidth
1.65Gpbs/165MHz
• Vertical Frequency Range
50/60Hz
Resolution(HDTV) • Interlaced(50&60Hz) • Progressive(50&60Hz)
480i, 576i, 1080i 480p, 576p, 720p, 1080p
Mechanical • Size of HDMI 8 Ports Splitter Amplifier (LxWxH) • Weight of HDMI 8 Ports Splitter Amplifier (Net) • Size of Receiver (LxWH) • Weight of Receiver (Net)
17 x 8 x 1.7 in 4.9 lbs 4 x 2.5 x 1in .85 lbs
Warranty • Limited Warranty
1 Year Parts and Labor
Environmental • Operating Temperature • Operating Humidity • Storage Temperature • Storage Humidity
32°F to +158°F 10% to 85 % RH (no condensation) 14°F to +175°F 5% to 90 % RH (no condensation)
Power Requirement • Power Supply for HDMI 8 Ports Splitter • Power Supply for Receiver
5V DC@ 4A,10W 5V DC@ 2A, 5W
Regulatory Approvals • Converter Unit • Power Supply
FCC,CE,UL UL,CE,FCC
Accessories Adapter • AC Power Adapter • User Manual
US standard English Version
Note: Specifications are subject to change without notice. 2
PANEL DESCRIPTIONS HDMI 8 PORT SPLITTER AMPLIFIER BY CAT5 x1
RECEIVER
3
CONNECTION AND OPERATION 1) Connect the single HDMI source (such as HD-DVD, PS3, STB) to the main HDMI input using a piece of HDMI cable. 2) Connect each piece of CAT5e/6 cable to both of the output of the HDMI 8 Ports Splitter Amplifier and input of the Receiver. 3) Connect outputs of Receivers to displays (such as HD-LCD, HD-DLP). 4) Plug the 5V@4A power supply into the HDMI 8 Ports Splitter Amplifier and the 5V@2A power suppliers to each Receiver individually.
CONNECTION DIAGRAM
END OF DOCUMENT 4
