Transcript
AntumbraButton Ethernet Keypad LED Controller
AntumbraButton Ethernet Keypad UL
Wall-mounted keypad that triggers up to six shows on Ethernet networks AntumbraButton Ethernet Keypad is a compact keypad that triggers up to six Light System Manager, ColorDial Pro, or Antumbra iColor Keypad light shows at the touch of a button. When used with Light System Manager, AntumbraButton Ethernet Keypad lets you easily trigger shows in multiple zones or locations. AntumbraButton Ethernet Keypad uses Power over Ethernet (PoE) technology to eliminate the need for a separate power source, affording greater freedom of placement, higher reliability, and easy installation.
AntumbraButton Ethernet Keypad Wall-mounted keypad that triggers up to six shows on Ethernet networks • Multiple keypads in Light System Manager installations— With Light System Manager, you can install up to 16 Antumbra Ethernet Keypads to control as many as 96 light shows in a single zone or location. You can control even more shows across multiple zones in Light System Manager. • Field effect technology—The user interface detects an approaching user and “wakes up,” initiating a wallwashing lighting effect on the Antumbra panel to encourage interaction. • Supplied as two components—The Application Module contains buttons, rim, base, and mounting plate, which are available in a variety of colors and materials to suit décor. The Ethernet Communication Module contains all of the logical and network functions and can be pre-programmed off-site, allowing commissioning to commence prior to finish options being finalized.
• Fingertip dimming and on/off control—Easily adjust brightness of connected lights, or turn them on and off. • Multiple language and icon labeling options—Button labeling language choices include English, Chinese, and Arabic. A library of common icons transcends language barriers, which is particularly useful in hospitality applications. For detailed product information, please refer to the Antumbra Ethernet Keypad Product Guide at http://www.colorkinetics.com/ls/controllers/antumbrabutton-ethernet-keypad.
47 mm (1.9 in)
83 mm (3.3 in)
65 mm (2.6 in)
Dimensions
47 mm (1.9 in)
83 mm (3.3 in) 75 mm (2.9 in)
65 mm (2.6 in)
116 mm (4.6 in)
32.6 mm (1.2 in)
32.6 mm (1.2 in)
9 mm (.35 in)
116 mm (4.6 in)
36 mm (1.41 in)
2
AntumbraButton Ethernet Keypad, UL Specification Sheet
75 mm (2.9 in)
9 mm (.35 in) 36 mm (1.41 in)
Specifications
Due to continuous improvements and innovations, specifications may change without notice.
AntumbraButton Ethernet Keypad, UL
Control Ethernet
Physical Supports 10/100 Mbps full- or half-duplex from any PoE- or IEEE 802.3af-compliant Ethernet switch. PoE injector required for use with non-IEEE 802.3afcompliant switches.
Electrical Input Power
3 W maximum via PoE
Dimensions
116 x 75 x 45 mm (4.6 x 3.0 x 1.8 in)
Weight
160 g (5.6 oz)
Housing
Medium matte white plastic enclosure
Connector/Cable
RJ45 Port, shielded CAT 5e or better data cable (not included)
Operating Temperature
-5° – 50° C (23° – 122° F)
Humidity
0 – 90%, non-condensing
Certification and Safety
AntumbraButton Ethernet Keypad, UL Specification Sheet
Approbation
UL/cUL, CE, CQC, FCC Class A, C-Tick
Environment
Indoor rated, IP20
3
Part numbers
Use Item Number when ordering in North America.
LED Controller
Item Number
Philips 12NC
103-000041-00
912400133666
Power over Ethernet Switch
120-000084-01
910503702557
Power over Ethernet Injector, North America Power Cord
109-000029-00
910503700383
Power over Ethernet Injector, Europe Power Cord
109-000029-01
910503700384
Ethernet Communication Module* Associated Parts
*
In addition to the Ethernet Communication Module, you must also order an AntumbraButton Application Module, detailed below.
AntumbraButton Application Module ordering The Application Module contains the buttons, rim, base, and mounting plate. The two visible components of the module (buttons and rim) are available in a range of different finishes. The base component contains all the sensors and indicators, which are enclosed by a rubber envelope to give an IP20 rating. A metal mounting plate supports the whole Antumbra structure so that it operates perfectly every time. An online ordering tool is available, allowing configuration with different button and rim finishes. The online ordering tool also allows for button labeling details. Once an Application Module has been configured, a full preview is available and the part number details provided for ordering purposes. To process an order for labeled Antumbra user interfaces, you must submit the generated order form. The online ordering tool can be found at http:// www.aprapps.lighting.philips.com/antumbra/.
The following figure shows a sample AntumbraButton Application Module part number, which is generated based on your customization options in the online ordering tool.
PABPA-WW-X Button Finish W White M Magnesium S Silver A Aluminum
Rim Finish W White B Black C Chrome A Aluminum
Copyright © 2016 Philips Solid-State Lighting Solutions, Inc. All rights reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, eW Fuse, ColorGraze, ColorPlay, ColorReach, iW Reach, EvenBalance eW Reach, DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, PureGlow and Powercore are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in the United States and / or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners. Due to continuous improvements and innovations, specifications may change without notice.
DAS-000153-01 R00 28 Mar 2016
Philips Color Kinetics 3 Burlington Woods Drive Burlington, Massachusetts 01803 USA Tel 888.385.5742 Tel 617.423.9999 Fax 617.423.9998 www.philipscolorkinetics.com
