Transcript
www.audison.eu
AP1 D Mono amplifier. The AP1 D amplifier was designed to drive a subwoofer and is the ideal extension of the AP8.9 bit and AP4.9 bit. At 2 Ohms it is stable and can supply 540 W power with extremely compact dimension. With the APTK 3 (Audison Prima Tower Kit 3) staking system it’s possible to stack the AP1 D and save space without any problem of overheating.
PRE OUT
Speaker Output
CEA SPECIFICATIONS
Voltage: Idling current: Switched off: Consumption @ 14.4 VDC 2Ω Max Musical Power: Remote IN Fuse
7.5 ÷ 15 VDC 1A <0.05 mA 30 A 7 ÷ 15 VDC (1 mA) 30 A
AMPLIFIER STAGE Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.2 % Distortion - THD @ 100 Hz, 4 Ω, 90% Output Power: 0.3 % Bandwidth (-3 dB, 2 V RMS, 4Ω): 16 ÷ 40k Hz S/N ratio @ A weighted, 1,5V, Output Power: 100 dBA Damping factor @ 100 Hz, 2 VRMS, 4 Ω: 150 Damping factor @ 1 kHz, 2 VRMS, 4 Ω 160 Input sensitivity PRE IN: Selectable: 1,5 - 3,0 - 4,5 V RMS Input sensitivity SPEAKER IN: Selectable: 3,0 – 6,0 – 9,0 V RMS Input impedance: 15k Ω LOAD IMPEDANCE (MIN): 2Ω • Ch: 1 MAX POWER 540 W OUTPUT POWER (RMS) @ 14.4 VDC, 1% THD: • 1 Ch @ 4Ω: 310 W x 1 • 1 Ch @ 2Ω: 540 W x 1 OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD: • 1 Ch @ 4Ω: 380 W x 1 • 1 Ch @ 2Ω: 680 W x 1
Hi-Pass Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 50÷150 SN ratio (ref. 1 W output): Hz
Subsonic - Lo-Pass 310 Wx1 off÷40 Hz
By
79 dBA 50÷150 Hz
SIGNAL CONNECTIONS PRE IN SPEAKER IN MUTE (Energy Saving Control)
RCA wired wired from AP4.9 bit / AP5.9 bit
GENERAL REQUIREMENTS FILTERS Ambient operating temperature range:
SIZE / WEIGHT Max size (mm/in.): Weight (kg/lb):
0 °C to 55 °C (32°F to 131°F)
Speaker Output
Hi-Pass
Lo-Pass
By-Pas
50÷5k 198 x 45,50 x 134 /50÷5k 7.8 x 1.8 x 5.27 Hz Hz
1.32 / 2.91
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
All specifications subject to change without notice_15.A
POWER SUPPLY
FILTERS
