Ap12-40-04-3 (415v,0.4kw,0.5-5l/sec,1.5-10m)

Transcript

AP12-40-04-3 (415V,0.4kW,0.5-5L/sec,1.5-10m) Contents: Unilift AP12.40.04.3 (96011024) ................................................................................................... Quotation text ................................................................................................................................ Quotation text incl. photo ............................................................................................................... Data sheet incl. curve .................................................................................................................... Pump curve ................................................................................................................................... Dimensional drawing ..................................................................................................................... Wiring diagram .............................................................................................................................. Printed from Grundfos CAPS 2 2 3 5 6 7 8 1/8 Position Qty. 1 Description Single Price Unilift AP12.40.04.3 Product No.: 96011024 Submersible drainage pump type Price on request Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F. The pump is fitted with a suction strainer. The impeller is a SEMI OPEN impeller for 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings. The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings. Liquid: Liquid temperature range: 0 .. 55 °C Technical: Type of impeller: Maximum particle size: Curve tolerance: SEMI OPEN 12 mm ISO 9906 Annex A Materials: Pump housing: Impeller: Stainless steel 1.4301 DIN W.-Nr. 304 AISI Stainless steel 1.4301 DIN W.-Nr. 304 AISI Installation: Pump outlet: Maximum installation depth: Rp 1 1/2 10 m Electrical data: Power input - P1: Mains frequency: Rated voltage: Rated current: Cos phi - power factor: Rated speed: Enclosure class (IEC 34-5): Insulation class (IEC 85): Length of cable: Type of cable plug: 0.7 kW 50 Hz 3 x 400 V 1.2 A 0,83 2800 rpm IP68 F 10 m NONE Others: Net weight: Gross weight: 10.2 kg 10.7 kg Printed from Grundfos CAPS 2/8 Position Qty. 1 Description Single Price Unilift AP12.40.04.3 Price on request Note! Product picture may differ from actual product Product No.: 96011024 Submersible drainage pump type Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F. The pump is fitted with a suction strainer. The impeller is a SEMI OPEN impeller for 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings. The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings. Liquid: Liquid temperature range: 0 .. 55 °C Technical: Type of impeller: Maximum particle size: Curve tolerance: SEMI OPEN 12 mm ISO 9906 Annex A Materials: Pump housing: Impeller: Installation: Pump outlet: Maximum installation depth: Stainless steel 1.4301 DIN W.-Nr. 304 AISI Stainless steel 1.4301 DIN W.-Nr. 304 AISI Rp 1 1/2 10 m Electrical data: Printed from Grundfos CAPS 3/8 Position Qty. Description Single Price Power input - P1: Mains frequency: Rated voltage: Rated current: Cos phi - power factor: Rated speed: Enclosure class (IEC 34-5): Insulation class (IEC 85): Length of cable: Type of cable plug: 0.7 kW 50 Hz 3 x 400 V 1.2 A 0,83 2800 rpm IP68 F 10 m NONE Others: Net weight: Gross weight: 10.2 kg 10.7 kg Printed from Grundfos CAPS 4/8 Technical: Max flow: Head max: Type of impeller: Maximum particle size: Curve tolerance: Materials: Pump housing: Impeller: Value Unilift AP12.40.04.3 96011024 5700390901608 H (m) Unilift AP12.40.04.3 9 8 14 m³/h 10 m SEMI OPEN 12 mm ISO 9906 Annex A 7 6 5 4 3 Stainless steel 1.4301 DIN W.-Nr. 304 AISI Stainless steel 1.4301 DIN W.-Nr. 304 AISI 2 1 0 0 P1 (W) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Q(l/s) 600 Installation: Pump outlet: Maximum installation depth: Inst dry/wet: Installation: Rp 1 1/2 10 m D/S horizontal or vertical Liquid: Liquid temperature range: 0 .. 55 °C Electrical data: Power input - P1: P2: Mains frequency: Rated voltage: Rated current: Cos phi - power factor: Rated speed: Enclosure class (IEC 34-5): Insulation class (IEC 85): Motor protec: Thermal protec: Length of cable: Type of cable plug: 0.7 kW 0.4 kW 50 Hz 3 x 400 V 1.2 A 0,83 2800 rpm IP68 F NONE external 10 m NONE Others: Net weight: Gross weight: 10.2 kg 10.7 kg 400 200 0 216 Rp 1 1/2 321 Description Product name: Product No: EAN number: L1 L2 L3 PE U V W PE M 3 Printed from Grundfos CAPS 5/8 96011024 Unilift AP12.40.04.3 H (m) Unilift AP12.40.04.3 10 9 8 7 6 5 4 3 2 1 0 0 P1 (W) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Q(l/s) 800 600 400 200 0 Printed from Grundfos CAPS 6/8 96011024 Unilift AP12.40.04.3 216 321 Rp 1 1/2 Note! All units are in [mm] unless others are stated. Printed from Grundfos CAPS 7/8 96011024 Unilift AP12.40.04.3 L1 L2 L3 PE U V W PE M 3 Note! All units are in [mm] unless others are stated. Printed from Grundfos CAPS 8/8