Apartment Video Door Phone Stations

Transcript

SECTION 4A (REV.E) APARTMENT VIDEO DOOR PHONE STATIONS Download from www.urmetdomus.com Technical Manuals area. SECTION CONTENTS UTOPIA COLOUR VIDEO DOOR PHONE Ref. 1703/1 2 ARTICO VIDEO DOOR PHONE Ref. 1705/1 11 SPECIFICATIONS - TECHNICAL FEAUTURES ...............................2 BRACKET Ref. 1703/82 ...................................................................3 Bracket terminal board .................................................................3 Technical feautures Ref. 1703/701 ...............................................3 Default programming ....................................................................3 INSTALLATION.................................................................................3 TONE SELECTION ...........................................................................4 Door phone call tone ....................................................................4 Floor call tone ...............................................................................5 Programming data deletion ..........................................................5 ACCESSORIES FOR UTOPIA VIDEO DOOR PHONES ...................5 SPECIFICATIONS - TECHNICAL FEAUTURES .............................11 BRACKET Ref. 1705/82 .................................................................12 Bracket terminal board ...............................................................12 Technical feautures Ref. 1705/701 .............................................12 Default programming ..................................................................12 INSTALLATION...............................................................................12 TONE SELECTION .........................................................................13 Door phone call tone ..................................................................13 Floor call tone .............................................................................13 Programming data deletion ........................................................13 FRONT GLASS REPLACEMENT ....................................................13 ATLANTICO BLACK/WHITE VIDEO DOOR PHONE FOLIO FLUSH-MOUNTED COLOUR HANDS-FREE VIDEO DOOR PHONE 6 SPECIFICATIONS - TECHNICAL FEAUTURES ...............................6 ATLANTICO COLOUR VIDEO DOOR PHONE Ref. 1702/40 7 SPECIFICATIONS - TECHNICAL FEAUTURES ...............................7 ATLANTICO VIDEO DOOR PHONE 8 BRACKET Ref. 1702/82 ...................................................................8 Bracket terminal board .................................................................8 Technical feautures Ref. 1702/701 ...............................................8 Default programming ....................................................................8 INSTALLATION ................................................................................8 TONE SELECTION ...........................................................................9 Door phone call tone ....................................................................9 Floor call tone ...............................................................................9 Programming data deletion ..........................................................9 ACCESSORIES FOR ATLANTICO VIDEO DOOR PHONES .............9 Add-on Ref. 1082/96 ....................................................................9 Coloured mask kit Ref. 1702/50 .................................................10 14 SPECIFICATIONS - TECHNICAL FEAUTURES .............................14 TERMINALS BOARD DESCRIPTION .............................................15 DEFAULT PROGRAMMING ...........................................................15 INSTALLATION...............................................................................15 On brick walls .............................................................................15 On plasterboard walls.................................................................15 MAIN MENU FUNCTION ................................................................16 UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 17 SPECIFICATIONS - TECHNICAL FEAUTURES .............................17 BRACKET Ref. 1703/84 .................................................................18 Bracket terminal board ...............................................................18 Technical feautures ....................................................................18 Default programming ..................................................................18 WALL-MOUNTED INSTALLATION .................................................18 FLUSH-MOUNTED VERSION INSTALLATION ..............................19 INSTALLATION ON PLASTERBOARD WALLS ..............................21 ACCESSORIES FOR UTOPIA VIDEO DOOR PHONES .................22 § Some products may be described in the “New” section. 2GO! - Technical manual sec.4a −−−− 1 Ref. 1703/1 UTOPIA COLOUR VIDEO DOOR PHONE Ref. 1703/1 SPECIFICATIONS TECHNICAL FEAUTURES VIDEO DOOR PHONE 55 mm 10 9 8 7 1 2 3 6 4 The Utopia video door phone is a colour device with an elegant, revolutionary style and a particularly slim profile (protruding only 55 millimetres from the wall) designed by Studio De Lucchi. Some settings are arranged under the front sliding cover to make the design more streamline and convenient. Standard controls of Utopia, in addition to colour, brightness and contrast, include three auxiliary buttons and indication LED. The video door phone is easy to install because no masonry work is needed and all connections are made to the bracket on which the video door phone will eventually be fastened. The handset is connected simply by means of a telephone plug. The video door phone Ref. 1703/17 is set up to a speaker capable interfacing with hearing aids by means of the “T” function. SPECIFICATIONS The main features of the video door phone are: • Flat 4” TFT backlit colour module. • Call speaker separate from handset. • Adjustable call volume: when the call volume selector is in “MUTE” ( ) position, the corresponding LED lights up to indicate that the call tone has been inhibited. The LED is visible also when the front panel is closed. APARTMENT VIDEO DOOR PHONE STATIONS 180 mm 225 mm UTOPIA COLOUR VIDEO DOOR PHONE UTOPIA COLOUR Ref. 1703/1 § When volume is set to “MUTE” the video door phone will not ring but the video module will light up. • Adjustable colour and brightness of the picture by means of a slider. • Adjustable contrast by means of a trimmer positioned under the sliding front panel. • Two additional buttons ( , ) for programming, auto power-on, special decoder activation for secondary electrical locks, staircase lights, etc. • Button : press this button to activate the “automatic door opener” function. A door opener command will be sent when a call is received from a door unit. The red LED indicates when the function is on. • Door opener button: simply press the button to operate the door lock ( ); the button will remain lit as long as the picture appears on the video door phone. • Open door indicator: a red LED lights up when the door is open if the system is set up for this function. 2 −−−− sec.4a 5 1 Auxiliary buttons 2 Button for automatic door opener function 3 Contrast adjustment control 4 Brightness adjustment control 5 Colour adjustment trimmer 6 Call tone adjustment trimmer 7 Door opener button 8 Automatic door opener function LED 9 Mute function led 10 Open door led TECHNICAL FEAUTURES Power voltage: Working Uptake: Stand-by: Working power: CCIR Version Vertical frequency: Horizontal frequency: Video signal: LCD: Screen size: Resolution: Colour system: Switch-on delay: Transmitting capsule: Receiving capsule: Button voltage: Button current: Operating temperature range: Max. humidity: 16 ÷ 18,5Vcc max 0,36A 0A max 6,5W 50Hz ± 2Hz 15625 ± 300Hz 1Vpp 75Ω nominal 1Vpp -6 dB minimum 4” backlit 81 x 59mm 380H x 250V pixel PAL 4 sec. max. electret microphone speaker 45Ω 24Veff. max. 1,2Aeff. -5° ÷ +50°C 90% UR 2GO! - Technical manual Ref. 1703/1 BRACKET Ref. 1703/82 INSTALLATION BRACKET Ref. 1703/82 INSTALLATION The Utopia video door phone Ref. 1703/1 is supplied without bracket that must be purchased separately. Proceed as follows to install the Utopia video door phone: 1. Arrange the duct so that it ends in correspondence with one of the input holes. 2. Remove bracket protection. The bracket fits connection terminals, programming dip switches and line terminal switch. A yellow LED is provided for checking correct reception of the Video signal. The LED comes on if reception is not optimal. 5 NO 1 DIP ON 1 2 3 4 5 ON 1 2 2 1 Line terminal switch 2 Terminal board 3 User code dip switch (CODE) 4 Apartment internal code dip switch (INT) 5 Yellow indicator LED 4 3 Kit Ref. 1703/701 including the following devices: • System 2GO! bracket • One-user distributor 3. Arrange the bracket on wall considering height from ground and side clearance. Ref. 1703/82 Ref. 1082/51 UTOPIA COLOUR VIDEO DOOR PHONE UTOPIA COLOUR VIDEO DOOR PHONE Ref. 1703/1 m 6c § The one-user distributor must be installed only for video door phones connected in extension configuration. The distributor is 10 LINE LINE S+ SCP CP NO } Non-polarised bus line Supplementary ringer connection positive Supplementary ringer connection negative m 7c } Floor call button 10 cm 4. Fasten the bracket to the wall using the bolt provided. Alternatively fasten the bracket to a flush-mounting box using the specific holes. To use the floor call or supplementary ringer function, remove the dedicated terminal protection and connect the respective wires. TECHNICAL FEAUTURES Ref. 1703/701 Max. bracket draw with monitor on: Max. bracket draw in standby: One-user distributor draw: 550mA 11mA 8 ÷ 12mA NO DEFAULT PROGRAMMING User code: Indoor station code: Line termination: 31 0 ON NO 2GO! - Technical manual sec.4a −−−− 3 APARTMENT VIDEO DOOR PHONE STATIONS BRACKET TERMINAL BOARD cm 155 cm not required with connections in in-out configuration. Ref. 1703/1 UTOPIA COLOUR VIDEO DOOR PHONE Ref. 1703/1 TONE SELECTION UTOPIA COLOUR VIDEO DOOR PHONE 5. Connect the wires to the specific terminals. 6. Configure the dip switches as shown in the “System installation and activation” section. § Complete system installation and power the system up before fastening the video door phone to the bracket. Check that the yellow LED on the brackets is off. Otherwise proceed as follows: • Check correct setting of line terminal. • Check programmed settings of apartment stations and brackets. • Split the system up to isolate the part which generates Video signal transmission and reception problems. 2. Fit the Utopia video door phone on the bracket as follows: 2.1 Fasten the video door phone to the hooks B on the upper side of the bracket. 2.2 Turn the video door phone downwards. 2.3 Shut the video door phone on the bracket and ensure that fastening lever C is blocked. Power the system and check that the yellow LEDs go out. Then refit the clip-on cover onto the bracket. Remove the cover only before fitting the Utopia video door phone on the bracket. B C NO § Press lever C and reverse the sequence to remove the video door phone. 1. Remove the protective cover from the bracket. B B TONE SELECTION Five tones can be selected on 2GO! system indoor stations. The tones can be programmed also by the end user by following the simple sequence below. DOOR PHONE CALL TONE APARTMENT VIDEO DOOR PHONE STATIONS NO 1. Hold the door opener button pressed. Press and release the button . The indoor station will play a tone. 2. Hold the door opener button pressed and press the button again to change the tone. 3. Release the Door opener button when you have chosen the tone you want. The tone is now programmed. The selected tone will be the same for all door phone calls. The source of the call can however be distinguished by timing the tone: 4 −−−− sec.4a Call origin Time Call from main door unit 3s ON Call from secondary door unit 0,4s ON-0,2s OFF for 5 times Intercom call 0,5s ON-0,5s OFF for 5 times 2GO! - Technical manual Ref. 1703/1 UTOPIA COLOUR VIDEO DOOR PHONE Ref. 1703/1 ACCESSORIES FOR UTOPIA VIDEO DOOR PHONES 1. Hold the door opener button pressed. Press and release the button . The indoor station will play a tone. 2. Hold the door opener button pressed and press the button again to change the tone. 3. Release the Door opener button when you have chosen the tone you want. The tone is now programmed. ACCESSORIES FOR UTOPIA VIDEO DOOR PHONES The video door phone can be customised by replacing the front flaps with the following models: • Yellow Ref. 1703/51 • Green Ref. 1703/52 • Anthracite black Ref. 1703/53 Replace by removing the sliding protection flaps. The floor call timing is fixed (3 seconds). UTOPIA COLOUR VIDEO DOOR PHONE FLOOR CALL TONE PROGRAMMING DATA DELETION Proceed as follows to delate all optional programming data: 1. Hold the door opener button pressed and pick-up the handset. 2. Press and on the video door phone at the same time for 3 seconds until you hear the deletion tone. 3. Release buttons on the video door phone and hang up. APARTMENT VIDEO DOOR PHONE STATIONS Refit the protective flaps. 2GO! - Technical manual sec.4a −−−− 5 ATLANTICO BLACK/WHITE VIDEO DOOR PHONE SPECIFICATIONS TECHNICAL FEAUTURES BLACK/WHITE VIDEO DOOR SPECIFICATIONS The main characteristics of the video door phone are: • Flat 4” black and white video module. • Adjustable and mutable call volume. The adjustment wheel appears red when the volume is muted. § When volume is set to “MUTE” the video door phone will not ring but the video module will light up. • Door opener button is lit up when video module is on. • Two additional buttons ( and ) for programming, auto poweron, special decoder activation for secondary electrical locks, staircase lights, etc.). • Adjustable brightness and contrast. 218 mm The Atlantico video door phone has innovative simple, essential designed fashioned by Michele De Lucchi. The following version are available: • White Ref. 1702/1 • Anthracite Ref. 1702/41 • High Tech Grey Ref. 1702/42 The front mask colour can be changed with the kit Ref. 1702/50 to suit the video door phone for all architectural context. The video door phone is easy to install because no masonry work is needed and all connections are made to the bracket on which the video door phone will eventually be fastened. The handset connection is particularly ergonomic. A simple telephone plug is used. The call volume (to dedicated speaker) can be adjusted in linear fashion and muted. The Door opener button by the side of the handset is lit up and green when the monitor is on. The video door phone Ref. 1702/17 is set up to a speaker capable interfacing with hearing aids by means of the “T” function. 80 mm 220 mm ATLANTICO BLACK/WHITE VIDEO DOOR PHONE ATLANTICO PHONE Door opener button Auxiliary service/ Intercom call buttons Auto-on/ Intercom call button Call volume/ Mute function Brightness adjustment Contrast adjustment TECHNICAL FEAUTURES Power voltage: Working Uptake: Stand-by: Working power: CCIR Version Vertical frequency: Horizontal frequency: Video signal: APARTMENT VIDEO DOOR PHONE STATIONS Kinescope: Phosphorous: Screen size: Geometric distorsion: Brightness: X-rays: Switch-on delay: Transmitting capsule: Receiving capsule: Button voltage: Button current: Operating temperature range: Max. humidity: 6 −−−− sec.4a 16 ÷ 18,5Vcc max 0,35Acc 0A max 6,5W 50Hz ± 2Hz 15625 ± 300Hz 1Vpp 75Ω nominal 1Vpp -6dB minimum 4” flat 13mm neck P45 81 x 59mm vert. 5% max. horiz. 5% max. barrel 10% max. 170cd/m2 max. setting. none 4 sec. max. electret microphone speaker 45Ω 24Veff. max. 1,2 Aeff. -5° ÷ +50°C 90% UR 2GO! - Technical manual Ref. 1702/40 ATLANTICO COLOUR VIDEO DOOR PHONE Ref. 1702/40 SPECIFICATIONS TECHNICAL FEAUTURES SPECIFICATIONS The main characteristics of the video door phone are: • Flat 4” LCD colour module. • Adjustable and mutable call volume. The adjustment wheel appears red when the volume is muted. § When volume is set to “MUTE” the video door phone will not ring but the video module will light up. • Door opener button is lit up when video module is on. • Two additional buttons ( and ) for programming, auto poweron, special decoder activation for secondary electrical locks, staircase lights, etc.). • Adjustable brightness and colour. The Atlantico video door phone is a colour apartment station which can be used in 2GO! systems when equipped with the specific bracket. As the black and white version, also this model has adjustable call tone volume and muting functions. The video door phone is easy to install because no masonry work is needed and all connections are made to the bracket on which the video door phone will eventually be fastened. The handset connection is particularly ergonomic. A simple telephone plug is used. The video door phone is only white but the front part can be customised by replacing the standard frame (blue) with one of the five frames from the Ref. 1702/50 kit. The video door phone Ref. 1702/47 is set up to a speaker capable interfacing with hearing aids by means of the “T” function. 80 mm 220 mm 218 mm Door opener button Auxiliary service/ Intercom call buttons Auto-on/ Intercom call button Call volume/ Mute function ATLANTICO COLOUR VIDEO DOOR PHONE ATLANTICO COLOUR VIDEO DOOR PHONE Ref. 1702/40 Brightness adjustment Colour adjustment Power voltage: Working Uptake: Stand-by: Working power: CCIR Version Vertical frequency: Horizontal frequency: Video signal: LCD: Screen size: Resolution: Colour system: Switch-on delay: Transmitting capsule: Receiving capsule: Button voltage: Button current: Operating temperature range: Max. humidity: 2GO! - Technical manual 16 ÷ 18,5Vcc max 0,35A 0A max 6,5W 50Hz ± 2Hz 15625 ± 300Hz 1Vpp 75Ω nominal 1Vpp -6dB minimum 4” backlit 81 x 59mm 380H x 250V pixel PAL 4 sec. max. electret microphone speaker 45Ω 24Veff. max. 1,2Aeff. -5° ÷ +50°C 90% UR sec.4a −−−− 7 APARTMENT VIDEO DOOR PHONE STATIONS TECHNICAL FEAUTURES ATLANTICO VIDEO DOOR PHONE BRACKET Ref. 1702/82 DEFAULT PROGRAMMING The Atlantico video door phone is supplied without bracket that must be purchased separately. User code: Indoor station code: Line termination: The bracket fits connection terminals, programming dip switches and line terminal switch. A yellow LED is provided for checking correct reception of the Video signal. The LED comes on if reception is not optimal. DIP ON 1 2 3 4 5 ON 3 2 4 INSTALLATION Yellow indicator LED 2 Connector for Ref. 1082/96 add-on 3 User code dip switch (CODE) 4 Apartment internal code dip switch (INT) 5 Line terminal switch 6 Terminal board Kit Ref. 1702/701 including the following devices: • System bracket • One-user distributor DIP ON ON 3. Connect the wires to the specific terminals. 4. Configure the dip switches as shown in the “System installation and activation” section. Ref. 1702/82 Ref. 1082/51 § The one-user distributor must be installed only for video door phones connected in extension configuration. The distributor is not required with connections in in-out configuration. BRACKET TERMINAL BOARD LINE LINE S+ SCP CP } } 1 2 1,55 m 1 1 2 3 4 5 5 6 APARTMENT VIDEO DOOR PHONE STATIONS 31 0 ON Proceed as follows to install the Atlantico video door phone and the respective bracket: 1. Arrange the duct so that it ends in correspondence with one of the input holes. 2. Fasten the bracket to the wall at the height from the floor shown by means of the four screws. 1 1 2 ATLANTICO VIDEO DOOR PHONE BRACKET Ref. 1702/82 INSTALLATION § Complete system installation and power the system up before fastening the video door phone to the bracket. Check that the yellow LED on the brackets is off. Otherwise proceed as follows: • Check correct setting of line terminal. • Check programmed settings of apartment stations and brackets. • Split the system up to isolate the part which generates Video signal transmission and reception problems. 5. Extract the retainer hook A by inserting the tip of a screwdriver and pulling the hook downwards. 6. Fasten the video door phone to the bracket as shown in the figure. Non-polarised bus line Supplementary ringer connection positive Supplementary ringer connection negative § The switch can be either in position “A” or in position “B” on video door phones. Floor call button To use the floor call or supplementary ringer function, remove the dedicated terminal protection and connect the respective wires. 7. Fasten the video door phone by pushing the retainer hook A upwards. A TECHNICAL FEAUTURES Ref. 1702/701 Max. bracket draw with monitor on: Max. bracket draw in standby: One-user distributor draw: 8 −−−− sec.4a 550mA 11mA 8 ÷ 12mA 2GO! - Technical manual ATLANTICO VIDEO DOOR PHONE TONE SELECTION ACCESSORIES FOR ATLANTICO VIDEO DOOR PHONES Five tones can be selected on 2GO! system indoor stations. The tones can be programmed also by the end user by following the simple sequence below. ACCESSORIES FOR ATLANTICO VIDEO DOOR PHONES ADD-ON Ref. 1082/96 A special add-on module Ref. 1082/96 can be purchased separately and combined with basic monitors in intercom systems where up to 6 buttons, 2 LEDs and a switch are required. DOOR PHONE CALL TONE 1. Hold the door opener button pressed. Press and release the button . The indoor station will play a tone. 2. Hold the door opener button pressed and press the button again to change the tone. 3. Release the Door opener button when you have chosen the tone you want. The tone is now programmed. FUNCTION 6 5 4 3 2 1 2 3 4 5 6 1 Red Led Green Led ATLANTICO VIDEO DOOR PHONE TONE SELECTION The selected tone will be the same for all door phone calls. The source of the call can however be distinguished by timing the tone: Time Call from main door unit 3s ON Call from secondary door unit 0,4s ON-0,2s OFF for 5 times Intercom call 0,5s ON-0,5s OFF for 5 times FLOOR CALL TONE 1. Hold the door opener button pressed. Press and release the button . The indoor station will play a tone. 2. Hold the door opener button pressed and press the button again to change the tone. 3. Release the Door opener button when you have chosen the tone you want. The tone is now programmed. AUTOMATIC DOOR OPENER FUNCTION This function can be switched on and off by means of the dedicated button on the Ref. 1082/96 add-on. The green LED will light up when the function is on. A door opener command is transmitted when a call from a door unit is received. Program this function on one of the indoor stations only if there are several indoor stations in parallel. MASTER DOOR UNIT OPEN DOOR FUNCTION The indoor stations can monitor the physical state of the Master door by connecting a sensor to the SP/GND terminals. The red LED on the Ref. 1082/96 will light up when the door is open. INTERCOM CALL FORWARDING This function is similar to the basic function illustrated for the buttons and . Six buttons can be programmed for managing the same number of calls. INSTALLATION • Fasten the add-on to the bracket using the plates provided. • Open the add-on top. REAR VIEW The floor call timing is fixed (3 seconds). PROGRAMMING DATA DELETION Proceed as follows to delate all optional programming data: 1. Hold the door opener button pressed and pick-up the handset. 2. Press and on the video door phone at the same time for 3 seconds until you hear the deletion tone. 3. Release buttons and hang up. 2GO! - Technical manual sec.4a −−−− 9 APARTMENT VIDEO DOOR PHONE STATIONS Call origin ATLANTICO VIDEO DOOR PHONE ATLANTICO VIDEO DOOR PHONE ACCESSORIES FOR ATLANTICO VIDEO DOOR PHONES • Connect the flat wire provided to the video door phone bracket. • Fasten the monitor to the bracket after connecting: extract fastening hook A to fasten the monitor; fasten it to the bracket and block it by pushing the hook A inwards. A B A C • Close the add-on top. D • Remove the clear plastic cover to access the name tags. 6 E 5 4 APARTMENT VIDEO DOOR PHONE STATIONS 3 2 1 1 2 COLOURED MASK KIT Ref. 1702/50 The video door phone can be customised by replacing the front mask and add-on name tag with those contained in the Ref. 1702/50 kit. The kit contains masks and cards of the following colours: • Yellow • Pink • Grey • Green • Blue F Besides the coloured frames the kit contains a protective smoke grey cover. § The video door phone grey and blue frames are combined with name tags with a white background and coloured lines. Other media, such as photographs or wall paper, can be use to customize the video door phone instead of 1702/50 kit. In this case use one of the frames provided as a template to trace the exact installation profile. 10 −−−− sec.4a 2GO! - Technical manual Ref. 1705/1 ARTICO VIDEO DOOR PHONE Ref. 1705/1 SPECIFICATIONS TECHNICAL FEAUTURES 83 mm 241 mm 200 mm ARTICO VIDEO DOOR PHONE ARTICO VIDEO DOOR PHONE Ref. 1705/1 1 2 3 4 The video door phone Ref. 1705/17 is set up to a speaker capable interfacing with hearing aids by means of the “T” function. SPECIFICATIONS The main characteristics of the video door phone are: • Flat 4” black and white video module. • Adjustable and mutable call volume. The adjustment wheel appears red when the volume is muted. 1 Door opener button 2 Auxiliary button: used for special functions 3 Auxiliary button: used for special functions 4 Contrast adjustment control 5 Brightness adjustment control 6 Call volume control and adjustment: turn the knob as far as it will go (red part visible) to mute the call tone (“MUTE” function) TECHNICAL FEAUTURES Power voltage: Working Uptake: Stand-by: Working power: CCIR Version Vertical frequency: Horizontal frequency: Video signal: Kinescope: Phosphorous: Screen size: Geometric distorsion: MAX MED MUTE • Door opener button dedicated. • Two additional buttons ( , for programming, auto power-on, special decoder activation for secondary electrical locks, staircase lights, etc.). • Adjustable brightness and contrast. 2GO! - Technical manual 6 Brightness: X-rays: Switch-on delay: Transmitting capsule: Receiving capsule: Button voltage: Button current: Operating temperature range: Max. humidity: 16 ÷18,5Vcc max 0,6A 0A max 10W 50 Hz ± 2Hz 15625 ± 300Hz 1Vpp 75Ω nominal 1Vpp -6 dB minimum 4” flat 20mm neck P45 81 x 59mm vert. 5% max horiz. 5% max barrel 10% max >100cd/m2 max. setting none 7 sec. max electret microphone speaker 45Ω 24Veff. max 1,2Aeff -5° ÷ +50°C 90% UR sec.4a −−−− 11 APARTMENT VIDEO DOOR PHONE STATIONS Artico offers the most modern technology applied to picture display and the best quality/price ratio. These features make the video door phone suitable for normal communication needs and security applications in video door phone systems. Thanks to the use of a functional flat 4” screen which reduces the protrusion from the wall, Artico can be installed on the wall without the need for masonry work. Connection of this video door phone are also simple and rapid, thanks to the terminal board arranged on the dedicated bracket. 5 Ref. 1705/1 BRACKET Ref. 1705/82 INSTALLATION BRACKET Ref. 1705/82 DEFAULT PROGRAMMING The Artico video door phone is supplied without bracket that must be purchased separately. User code: Indoor station code: Line termination: 31 0 ON INSTALLATION 1 2 3 ON DIP ON 1 2 3 4 5 ON 1 2 DIP ON 1 2 3 4 5 1 2 4 Proceed as follows to install the Artico video door phone and the respective bracket: 1. Arrange the duct so that it ends in correspondence with one of the input holes. 2. Fasten the bracket to the wall at the height from the floor shown by means of the four screws. 5 1 Yellow indicator LED 2 User code dip switch (CODE) 3 Apartment internal code dip switch (INT) 4 Line terminal switch 5 Terminal board Kit Ref. 1705/701 including the following devices: • System bracket • One-user distributor Ref. 1705/82 ON DIP 12 34 5 Ref. 1705/82 Ref. 1082/51 § The one-user distributor must be installed only for video door phones connected in extension configuration. The distributor is ON 12 1,55 m ARTICO VIDEO DOOR PHONE ARTICO VIDEO DOOR PHONE Ref. 1705/1 A not required with connections in in-out configuration. BRACKET TERMINAL BOARD LINE LINE S+ SCP CP APARTMENT VIDEO DOOR PHONE STATIONS } } Non-polarised bus line 3. Connect the wires to the specific terminals. 4. Configure the dip switches as shown in the “System installation and activation” section. Supplementary ringer connection positive Supplementary ringer connection negative § Complete system installation and power the system up before fastening the video door phone to the bracket. Floor call button To use the floor call or supplementary ringer function, remove the dedicated terminal protection and connect the respective wires. Check that the yellow LED on the brackets is off. Otherwise proceed as follows: • Check correct setting of line terminal. • Check programmed settings of apartment stations and brackets. • Split the system up to isolate the part which generates Video signal transmission and reception problems. 5. Extract the retainer hook A by inserting the tip of a screwdriver and pulling the hook downwards. 6. Fasten the monitor to the bracket as shown in the figure. switch can be either in position “A” or in position “B” on § The video door phones. 7. Fasten the video door phone by pushing the retainer hook A upwards. TECHNICAL FEAUTURES Ref. 1705/701 Max. bracket draw with monitor on: Max. bracket draw in standby: One-user distributor draw: 12 −−−− sec.4a 800mA 11mA 8 ÷ 12mA 2GO! - Technical manual Ref. 1705/1 ARTICO VIDEO DOOR PHONE Ref. 1705/1 TONE SELECTION FRONT GLASS REPLACEMENT Five tones can be selected on 2GO! system indoor stations. The tones can be programmed also by the end user by following the simple sequence below. Proceed as follows to delate all optional programming data: 1. Hold the door opener button pressed and pick-up the handset. 2. Press and on the video door phone at the same time for 3 seconds until you hear the deletion tone. 3. Release buttons and hang up. DOOR PHONE CALL TONE 1. Hold the door opener button pressed. Press and release the button . The indoor station will play a tone. 2. Hold the door opener button pressed and press the button again to change the tone. 3. Release the Door opener button when you have chosen the tone you want. The tone is now programmed. FRONT GLASS REPLACEMENT The video door phone can be customised by replacing the front glass. The following colours are available: • Smoky grey: Ref. 1705/101 (pre-fitted on the video door phone) • Blue: Ref. 1705/102 A B C D ARTICO VIDEO DOOR PHONE PROGRAMMING DATA DELETION TONE SELECTION The selected tone will be the same for all door phone calls. The source of the call can however be distinguished by timing the tone: Call origin Time Call from main door unit 3s ON Call from secondary door unit 0,4s ON-0,2s OFF for 5 times Intercom call 0,5s ON-0,5s OFF for 5 times FLOOR CALL TONE APARTMENT VIDEO DOOR PHONE STATIONS 1. Hold the door opener button pressed. Press and release the button . The indoor station will play a tone. 2. Hold the door opener button pressed and press the button again to change the tone. 3. Release the Door opener button when you have chosen the tone you want. The tone is now programmed. The floor call timing is fixed (3 seconds). 2GO! - Technical manual sec.4a −−−− 13 FOLIO FLUSH-MOUNTED COLOUR HANDS-FREE VIDEO DOOR PHONE SPECIFICATIONS TECHNICAL FEAUTURES APARTMENT VIDEO DOOR PHONE STATIONS FOLIO FLUSH-MOUNTED COLOUR HANDS-FREE VIDEO DOOR PHONE FOLIO FLUSH-MOUNTED COLOUR HANDSFREE VIDEO DOOR PHONE 1 10 2 9 3 8 4 7 5 6 The Folio video door phone is a flush-mounted colour device with hands-free audio function. It protrudes only a few millimetres from the wall and its style suggestive of the Simon Urmet Nea wiring accessory design. It has a shiny “iPod effect” front panel. All settings are simply and intuitively made on an OSD (On Screen Display) menu with graphic icons and integrated textual descriptions using a handy four-position joypad. The internal name directory, programmable by the user, may be used to establish intercom calls to all users in the 2GO! system. The calling method is similar to that of a mobile telephone. Folio may be customised by the user by changing, for instance, the display colours and themes and programming a different ring tone for different call types. The only buttons on the front panel in addition to the joypad are those used to access the menu, switch audio on and off and open the door. The Folio come in two versions of different colour: • Black front • White front Video door phone mode Menu mode 1 Display 2 Door open indicator led on master station 3 Mute indicator led 4 Door opener button 5 Microphone OK Function button MUTE on/off 6 Staircase light switch Switchboard call Automatic switch-on Ref. 1706/1 Ref. 1706/2 7 Access menu Quit Menu 8 Audio button X SPECIFICATIONS 9 Audio on indicator led The main features of the video door phone are: • Flat 3.5” LCD backlit colour module. • Wide viewing angle in all directions also without mechanical tilting. • Call speaker separate from audio speaker. • 4 backlit icons for activating various functions arranged by the two sides of the display. • Backlit buttons with RGB variable colour LED programmable by the user. • Automatic door opening function activatable from menu: a door opening command is sent when a call is received from a door unit. A LED indicates when the function is on. • Adjustable audio volume and call volume with muting function. • Adjustable brightness and contrast from menu. 10 Automatic door opener on indicator led § Use mild detergents for delicate surfaces and a soft cloth to clean the front panel of the video door phone. Do not use abrasive materials. 14 −−−− sec.4a TECHNICAL FEAUTURES Power voltage: Working Uptake: Stand-by: Working power: CCIR Version Vertical frequency: Horizontal frequency: Video signal: LCD: Horizontal viewing angle: Vertical viewing angle Brightness: Screen size: Resolution: Colour system: Switch-on delay: Transmitting capsule: Receiving capsule: Operating temperature range: Max. humidity: 30Vcc 400mA max 11mA 1,5W max 50Hz ± 2Hz 15625 ± 300Hz 1Vpp 75Ω nominal 1Vpp -6dB minimum 3.5” backlit +60° ÷ -60° +50° ÷ -55° >250cd/m2 70 x 52mm 320H x 240V pixel PAL 4 sec. max electret microphone speaker 45Ω -5° ÷ +45°C 95% UR 2GO! - Technical manual FOLIO FLUSH-MOUNTED COLOUR HANDS-FREE VIDEO DOOR PHONE TERMINALS BOARD DESCRIPTION DEFAULT PROGRAMMING - INSTALLATION LINE LINE S+ SCP CP } } For installing the Folio video door phone on plasterboard walls, purchase kit Ref. 1706/61 in addition to the specific box Ref. 1706/60. Non-polarised bus line Supplementary ringer connection positive Supplementary ringer connection negative Proceed as follows: • Break the wall at a height of approximately 1,55 - 1,60m from the floor according to the dimensions shown in the following drawing. Floor call button 31 0 ON INSTALLATION ON BRICK WALLS 155 cm User code: Indoor station code: Line termination: 13,5 cm DEFAULT PROGRAMMING ,5 13 cm For installing the Folio video door phone on brick walls, purchase the specific box Ref. 1706/60 and fix it to the wall at a height of approximately 1,55 - 1,60m from the floor. Then fix the video door phone to the flush-mounting box by means of the four screws provided and snap the front panel onto the support. • Fit the kit components on the flush-mounting box. Ref. 1706/60 APARTMENT VIDEO DOOR PHONE STATIONS • Insert the box in the hole. Remove the protective film at the end of the operation. § After installation, the device will protrude by 8mm from the wall. The frame dimensions on the wall are 148 x 170mm. The flushmounting depth is equal to 58mm. 2GO! - Technical manual FOLIO FLUSH-MOUNTED COLOUR HANDS-FREE VIDEO DOOR PHONE ON PLASTERBOARD WALLS TERMINALS BOARD DESCRIPTION sec.4a −−−− 15 FOLIO FLUSH-MOUNTED COLOUR HANDS-FREE VIDEO DOOR PHONE MAIN MENU FUNCTION MAIN MENU FUNCTION The MAIN MENU function may be activated when the system is in stand-by mode. Press the MENU button to switch the video door phone on. The main menu will appear. (The video door phone will generate a sequence of consecutive beeps and will not light up if the MENU button is pressed while the system is busy. This means that the line is busy because another conversation is in progress. Try again later). IMPORTANT: Remember that the video door phone will be switched off when a call to any user in the system is received from the door unit. Use the ‘function’ button (↑↓) to select the required function and press (OK) to confirm. • Then fix the video door phone to the flush-mounting box by means of the four screws provided and snap the front panel onto the support. • Remove the protective film at the end of the operation. APARTMENT VIDEO DOOR PHONE STATIONS FOLIO FLUSH-MOUNTED COLOUR HANDS-FREE VIDEO DOOR PHONE • Fasten the screws of the kit to secure the box. The available functions are: 1. Video door phone answering service: This function uses the corresponding video door phone answering service functions where fitted in the system. 2. Intercom service: The list of users to which intercom calls can be made will appear automatically when this function is selected. Select a name and press OK to make the call. 3. Automatic door opener: This function is used to automatically operate the door lock when a call is received from a door unit. 4. Settings: Select this function to access the submenu used to adjust and set the video door phone. A. Audio settings B. Video settings C. Button backlighting D. Change screen theme E. Select ring tone F. Edit name directory G. Restore default settings 5. Change language: Select this function to display a list of the available languages. Select a language and press OK to change the interface dialogue language. § Refer to the manual supplied to the product for more information on operation and Folio video door phone customisations. 16 −−−− sec.4a 2GO! - Technical manual Ref. 1703/4 UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 SPECIFICATIONS TECHNICAL FEAUTURES UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE 49 mm 142 mm 11 9 8 225 mm 10 1 The Utopia video door phone is a colour device with an elegant, revolutionary style and a particularly slim profile designed by Studio De Lucchi. The most outstanding feature of this video door phone is that it is a free-hands model without handset. Communication is established by pressing the button and closed with second pression of the button. Utopia free-hands was designed to be installed in two different ways: wall-mounted without the need for masonry work, or flush-mounted to reduce the protrusion from the wall to only 16mm. Utopia has two sets of auxiliary buttons in addition to colour, brightness and contrast. Three indicator LEDs are provided for more simple and immediate use. These indicate open door, mute function and audio on conditions. SPECIFICATIONS The main characteristics of the video door phone are: • Flat 4” TFT backlit colour module. • Call speaker separate from handset. • Adjustable call volume: when the call volume selector is in “MUTE” ( ) position, the corresponding LED lights up to indicate that the call tone has been inhibited. The LED is visible also when the front panel is closed. § When volume is set to “MUTE” the video door phone will not ring but the video module will light up. • Adjustable colour and brightness of the picture by means of a slider. • Adjustable contrast by means of a trimmer positioned under the sliding front panel. • Two additional buttons ( , ) for programming, auto power-on, special decoder activation for secondary electrical locks, staircase lights, etc. : press this button to activate the “automatic door • Button opener” function. A door opener command will be sent when a call is received from a door unit. The red LED indicates when the function is on. • Door opener button: simply press the button to operate the door lock ( ); the button will remain lit as long as the picture appears on the video door phone. • Open door indicator: a red LED lights up when the door is open if the system is set up for this function. 2GO! - Technical manual 2 7 3 6 5 4 1 Audio button 2 Auxiliary buttons 3 Brightness adjustment control 4 Colour adjustment trimmer 5 Button for automatic door opener function 6 Contrast adjustment control 7 Call tone adjustment trimmer 8 Door opener button 9 Audio on LED 10 Mute function led 11 Door open LED (red) and automatic door opening function on LED (green) TECHNICAL FEAUTURES Power voltage: Working Uptake: Stand-by: Working power: CCIR Version Vertical frequency: Horizontal frequency: Video signal: LCD: Screen size: Resolution: Colour system: Switch-on delay: Transmitting capsule: Receiving capsule: Button voltage: Button current: Operating temperature range: Max. humidity: 16 ÷ 18,5Vcc max 0,36A 0,1A max 6,5W 50Hz ± 2Hz 15625 ± 300Hz 1Vpp 75Ω nominal 1Vpp -6 dB minimum 4” backlit 81 x 59mm 480H x 234V pixel PAL 4 sec. max electret microphone speaker 45Ω 24Veff. max 1,2 Aeff -5° ÷ +45°C 90% UR sec.4a −−−− 17 APARTMENT VIDEO DOOR PHONE STATIONS UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 Ref. 1703/4 BRACKET Ref. 1703/84 WALL-MOUNTED INSTALLATION BRACKET Ref. 1703/84 WALL-MOUNTED INSTALLATION The Utopia video door phone Ref. 1703/4 is supplied without bracket that must be purchased separately 1. Arrange the duct so that it ends in correspondence with one of the input holes. 2. Remove bracket protection. The bracket fits connection terminals, programming dip switches and line terminal switch. A yellow LED is provided for checking correct reception of the video signal. The LED comes on if reception is not optimal. 5 1 DIP ON 1 2 3 4 5 ON 1 2 2 1 Line terminal switch 2 Terminal board 3 User code dip switch (CODE) 4 Apartment internal code dip switch (INT) 5 Yellow indicator LED NO 4 3 3. Arrange the bracket on wall considering height from ground and side clearance. m 6c BRACKET TERMINAL BOARD LINE LINE S+ SCP CP } } Non-polarised bus line Supplementary ringer connection positive Supplementary ringer connection negative 10 Floor call button NO m APARTMENT VIDEO DOOR PHONE STATIONS 7c To use the floor call or supplementary ringer function, remove the dedicated terminal protection and connect the respective wires. 10 cm 155 cm UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 cm 4. Fasten the bracket to the wall using the bolt provided. Alternatively fasten the bracket to a flush-mounting box using the specific holes. TECHNICAL FEAUTURES Max. bracket draw with monitor on: Max. bracket draw in standby: 550mA 11mA DEFAULT PROGRAMMING User code: Indoor station code: Line termination: 31 0 ON NO NO 18 −−−− sec.4a 2GO! - Technical manual Ref. 1703/4 UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 FLUSH-MOUNTED VERSION INSTALLATION FLUSH-MOUNTED VERSION INSTALLATION • Fit the Ref. 1703/60 flush-mounting box at the recommended height from the floor. m 2c NO P TO 165 cm 2 cm 6. Remove the protective cover from the bracket. 7. Fit the Utopia video door phone on the bracket as follows: • Fasten the video door phone to the hooks B on the upper side of the bracket. • Turn the video door phone downwards. • Shut the video door phone on the bracket and ensure that fastening lever C is blocked. Ref. 1703/60 • Fit the frame inside the box and adjust correct perpendicularity. UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE 5. Arrange wiring and refit the clip-on cover on the bracket. Remove the cover only before fitting the Utopia video door phone on the bracket. B C P § Press lever C and reverse the sequence to remove the video door phone. P TO C 2GO! - Technical manual sec.4a −−−− 19 APARTMENT VIDEO DOOR PHONE STATIONS TO Ref. 1703/4 UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 FLUSH-MOUNTED VERSION INSTALLATION • Arrange wiring. UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE • Remove bracket protection. NO P TO NO • Remove the three fastening teeth from the bracket. • Remove the sliding protective covers. NO APARTMENT VIDEO DOOR PHONE STATIONS • Fasten the bracket to the frame. P TO NO D 20 −−−− sec.4a 2GO! - Technical manual Ref. 1703/4 UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 INSTALLATION ON PLASTERBOARD WALLS • Fasten the video door phone to the frame. The specific Ref. 1703/61 kit is required to install Utopia free-hands video door phone on plasterboard walls. The kit consists of a set of backing fasteners for 12 mm and 24 mm thick walls, adapted brackets and screws needed for installation. Proceed as follows: • Drill box Ref. 1703/60 with a Ø 2.2mm bit to form the through holes shown in the figure below. P TO Sch. 1703/60 Sett/fab. 25.01.2006 NO E • Fasten the adapter brackets of the box with the 3.5 x 9.5mm screws. • Refit the sliding protective covers. UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE INSTALLATION ON PLASTERBOARD WALLS 243 mm APARTMENT VIDEO DOOR PHONE STATIONS • Break into the plasterboard wall as shown the drawing below. m 0m 165 cm 16 2GO! - Technical manual sec.4a −−−− 21 Ref. 1703/4 UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE Ref. 1703/4 ACCESSORIES FOR UTOPIA VIDEO DOOR PHONES UTOPIA FREE-HANDS COLOUR VIDEO DOOR PHONE • Fit the backing fasteners in the hole. • Follow the instructions shown in the paragraph “Flush-mounting installation” to complete the installation. 0 06 03/6 1.20 . 17 25.0 Sch fab. t/ Set P TO • Drill the wall at the holes on the backing fasteners with a Ø 2.2mm bit. ACCESSORIES FOR UTOPIA VIDEO DOOR PHONES The video door phone can be customised by replacing the front flaps with the following models: • Yellow Ref. 1703/51 • Green Ref. 1703/52 • Anthracite black Ref. 1703/53 Replace by removing the sliding protection flaps. Refit the protective flaps. APARTMENT VIDEO DOOR PHONE STATIONS • Fix the box to the wall using 2.9 x 32mm screws. 0 06 03/6 1.20 . 17 25.0 Sch ab. t/f Set 22 −−−− sec.4a 2GO! - Technical manual