Transcript
Product Highlights
18000 mAh Portable Battery Charger
Quick Start Guide
Operation
Power level indicators On - Off button LED flash light Charge APB06F with the included Micro USB cable
LED flashlight
Checking the Capacity
To turn the LED flashlight on or off, simply press the button once to power on the powerbank and press the twice to turn On / Off the LED flashlight.
Press the “Power” button once to check the capacity per below LED status.
Charging the battery pack The battery is not fully charged and it is highly recommended that you charge APB06F before you begin using it. Note: Using APB06F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged.
Charge up to two devices at the same time*
aluratek.com
APB06F qsg Q10345
Copyright © 2014 Aluratek, Inc. All Rights Reserved.
*Original charging cable required
Tech Support & Warranty Information
1
1 2
2
USB OUTPUT 5V / 2.0A 5V / 1.0A
To charge the device, connect the larger end of the USB cable provided to your PC or a USB power adapter (not provided) and the Micro USB end to APB06F. The Red LED will be on while charging. In addition, one of the 4 Blue LED will be flashing depends on capacity. Once it is fully charged, the 4 Blue LED will stay on and the Red LED will turn off.
<25% capacity
25 - 50% capacity
50 - 75% capacity
>75% capacity
Charging your digital device Use the original cable that came with your device or a cable with suitable connector. Connect the USB tip to one of the USB Output ports on the battery pack. Charging will start automatically once the cable is connected. A Green LED will be on when your device is been charged.
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.
E-mail:
[email protected] Web: www.aluratek.com/support Local (Irvine, CA): 714-586-8730 Toll free: 1-866-580-1978 Aluratek warrants this product against defect in material or workmanship for 1 Year from the date of purchase. For more information, please visit: http://aluratek.com/warranty-return-policy You can register your product online at: http://aluratek.com/product-registration
Radio and TV Interference Statement WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.
