Transcript
MODEL:
ACS-110 DESCRIPTION:
SUBWOOFER SYSTEM TYPE:
SINGLE 10"/BASS REFLEX ®
PROCESSOR:
P-ACS-110 ENCLOSURE:
Rectangular FREQUENCY RESPONSE:
45 Hz - 150 Hz ±3 dB MAX SPL @ 1m:
114dB cont. / 120 dB peak DISPERSION:
OMNI
The ACS-110 is an extremely compact subwoofer with a tremendous power-to-size ratio. It utilizes tuned-chamber technology employing a 10" (254mm) long-excursion cone driver. Small enough to fit almost anywhere, it is ideally suited to restaurants, pubs and clubs, board rooms and screening rooms. It beautifully compliments the ACS-SAT, ACS-1 and ACS-2 in response and output power.
ENCLOSURE TYPE
ACS-110 Frequency Response w/controller: 45Hz to 150Hz (±3dB)
Rectangular, optimally vented bass
FORMAT
Mono-amp. Controller optional
DRIVER COMPLEMENT
Low Frequency Apogee 10" (254mm) permanent magnet cone type driver Nominal Impedance - 8 ohms
SENSITIVITY 1
93 dB SPL
FREQUENCY RESPONSE
45 Hz - 150 Hz ± 3 dB, 1m on axis
SOUND PRESSURE LEVEL 2
114 dB continuous, 120 dB peak @ 1m
MAX POWER HANDLING 3
150 watts continuous, 600 watts peak
10dB / div
RECOMMENDED CROSSOVER LF cutoff 80 Hz, HF cutoff 150 Hz, 12 to 48 dB per octave DISPERSION 4
Omnidirectional
INPUT CONNECTORS
5-way Binding Posts
CABINET CONSTRUCTION
Multi-ply Baltic birch
GRILL
Coated perforated metal
COLOR
Black - other colors optional
FINISH
Textured high strength polyurethane paint
WEIGHT
39.7 lbs. (18 kg)
20Hz
100Hz
1kHz
10kHz 20kHz
®
ACS MAIN FRAME LOUDSPEAKER CONTROLLER POWER
OPTIONS/ACCESSORIES
ACS-110 Controller (Model specific EQ and Limiting) Cables
LF OUT
SUB LINK
PIN 2+ PIN 3–
"SX" Weather Treatment for Harsh Environments Specifications subject to change without notice
ACS-4B
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN ACS-4B LIMIT
LEVEL
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN PIN 2+
ACS-115 LIMIT
BI-AMP
TYPICAL BI-AMP LF XLR MODULE
OUT
–
+
–
LIMIT
TYPICAL BI-AMP HF XLR MODULE
+
IN
PIN 3–
LEVEL
TYPICAL SUBWOOFER XLR MODULE
LEVEL
ACS-1
TYPICAL FULL-RANGE TERMINAL-STRIP MODULE
1
1 watt @ 1 meter, unless otherwise specified Measured at rated MAX POWER HANDLING 3 EIA Standard RS-426A, eight hours. Note: Music program will yield higher figures. 2
The ACS Controller consists of a MAIN FRAME which accepts four voicing modules. Modules are available for each of the different ACS loudspeaker types, with two module bays required for bi-amplified speakers. The controller provides factory-set equalization curves to smooth the response, protective limiting, and active crossovers (for bi-amplified models and subwoofers). Inputs and outputs are available with either XLR connectors or barrier strips. Mic input & EQ modules are also available.
ENGINEERING DATA
ACS-110 ENGINEERING DATA
ACS-110 SUBWOOFER
ACS-110 ACCESS DOOR. 10.000" SQ. OPENING
18.438" 468.33mm
14.688" 373.08mm
12.688" 322.28mm
FRONT VIEW W/O GRILL
SIDE VIEW
30°
0°
TOP VIEW
330°
90°
270°
120°
POLAR RESPONSE Scale is 6dB/division. Curves are Normalized. Horizontal Vertical
30° 300°
60°
240° 150° 180°
BACK VIEW
0°
300°
90°
270°
120°
240° 150°
210°
330°
30° 300°
90°
270°
120°
240°
180°
125 Hz
®
210°
180°
63 Hz
60°
150°
330°
60°
31.5 Hz 30°
0°
210°
0°
330° 300°
60°
90°
270°
120°
240° 150°
210°
180°
250 Hz 2180 South McDowell Blvd. Petaluma, California 94954 USA Phone (707) 778-8887 Main Fax (707) 778-6923 ©Apogee Sound, Inc. 2/96 42-0709
