Transcript
MODEL:
ACS-SAT DESCRIPTION:
CONTRACTOR SERIES LOUDSPEAKER SYSTEM TYPE:
SINGLE AMP/TWO-WAY ®
ENCLOSURE:
20 Degree Trapezoidal FREQUENCY RESPONSE:
150 Hz - 20 kHz ±3 dB POWER HANDLING:
75w cont. / 300w peak into 8 ohms SPL @ 1m:
106dB cont. / 112 dB peak DISPERSION:
Horizontal — 90 degrees Vertical — 90 degrees
The ACS-SAT (Satellite), photographed with a piccolo for size reference, is an exceptionally high powered speaker packaged in a miniature trapezoidal enclosure. Designed for use with a subwoofer (the ACS-110 is a perfect companion), the ACS-SAT provides articulate speech and high fidelity music reproduction suitable for restaurants, theaters, meeting rooms and similar public spaces.
ENCLOSURE TYPE
ACS-SAT Frequency Response w/controller: 150Hz to 20kHz (±3dB)
20 Degree Trapezoidal
FORMAT
Mono-amp, two-way. Controller optional
DRIVER COMPLEMENT
Low Frequency Apogee 6" (152mm) permanent magnet cone type driver
10dB / div
High Frequency Apogee 1" (25mm) titanium dome tweeter Nominal Impedance - 8 ohms SENSITIVITY 1
88 dB SPL
FREQUENCY RESPONSE
150 Hz - 20 kHz ± 3 dB, 1m on axis
SOUND PRESSURE LEVEL 2
106 dB continuous, 112 dB peak @ 1m
MAX POWER HANDLING 3
75 watts continuous, 300 watts peak
DISPERSION
4
20Hz
100Hz
1kHz
10kHz 20kHz
w/o controller: 200Hz to 20kHz (±3dB) 10dB / div
Horizontal —90 degrees Vertical — 90 degrees
INPUT CONNECTORS
5-way Binding Posts
CABINET CONSTRUCTION
Multi-ply Baltic birch
GRILL
Coated perforated metal
RIGGING HARDWARE
2 internal 16 gauge steel backing plates. Accepts 1/4" - 20 thread. 2 pick points total
COLOR
Black - other colors optional
FINISH
Textured high strength epoxy paint
WEIGHT
13.2 lbs. (6 kg)
20Hz
100Hz
1kHz
10kHz 20kHz
®
ACS MAIN FRAME LOUDSPEAKER CONTROLLER POWER
LF OUT
SUB LINK
PIN 2+ PIN 3–
ACS-4B
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN ACS-4B LIMIT
LEVEL
OUT PIN 2+
PIN 2+
PIN 3–
PIN 3–
IN PIN 2+
ACS-115 LIMIT
OPTIONS/ACCESSORIES
OUT –
+
–
+
IN
PIN 3–
LEVEL
BI-AMP
LIMIT
LEVEL
ACS-1
ACS-SAT Controller (Model specific EQ and Limiting) TYPICAL BI-AMP LF XLR MODULE
Cables
TYPICAL BI-AMP HF XLR MODULE
TYPICAL SUBWOOFER XLR MODULE
TYPICAL FULL-RANGE TERMINAL-STRIP MODULE
"SX" Weather Treatment for Harsh Environments Assorted Rigging Components Specifications subject to change without notice 1 1 watt @ 1 meter, unless otherwise specified 2 Measured at rated MAX POWER HANDLING 3 EIA Standard RS-426A, eight hours. Note: Music program will yield higher figures. 4 6 dB down points
The ACS Controller consists of a MAIN FRAME which accepts four voicing modules. Modules are available for each of the different ACS loudspeaker types, with two module bays required for bi-amplified speakers. The controller provides factory-set equalization curves to smooth the response, protective limiting, and active crossovers (for bi-amplified models and subwoofers). Inputs and outputs are available with either XLR connectors or barrier strips. Mic input & EQ modules are also available.
ENGINEERING DATA
ACS-SAT ENGINEERING DATA
ACS-SAT LOUDSPEAKER
ACS-SAT 7.250" 184.15mm
7.500" 190.50mm
4.944" 125.58mm 3.625" 92.08mm
7.250" 184.15mm
10.500" 266.70mm
10 DEGREES 1/4-20 RIGGING POINTS 1 EA, TOP & BOTTOM
FRONT VIEW W/O GRILL 30°
0°
330°
30° 300°
60°
POLAR RESPONSE Scale is 6dB/division. Curves are Normalized. Horizontal Vertical
90°
270°
120°
240° 150°
330°
30° 300°
60°
90°
270°
120°
240° 150° 180°
90°
270°
120°
240° 150° 180°
30°
0°
90°
30°
270°
120°
240° 150°
330°
30°
90°
270°
120°
240°
0°
300°
270°
120°
240° 150° 180°
4,000 Hz
®
30° 300°
90°
270°
120°
240° 210°
8,000 Hz
210°
2,000 Hz
60°
180°
330°
90°
330°
150°
210°
0°
60°
210°
180°
300°
180°
330°
1,000 Hz
60°
150°
0°
300°
500 Hz
210°
250 Hz
60°
210°
330° 300°
125 Hz 0°
0°
60°
210°
180°
30°
BACK VIEW
SIDE VIEW
0°
330° 300°
60°
90°
270°
120°
240° 150° 180°
210°
16,000 Hz
2180 South McDowell Blvd. Petaluma, California 94954 USA Phone (707) 778-8887 Main Fax (707) 778-6923 ©Apogee Sound, Inc. 2/96 42-0701
