Apollo® 77c

Transcript

MADE IN THE USA Ball Valves Butterfly Valves Relief Valves Backflow Preventers In-Line Check Valves Pipeline Strainers Water Gauges Plumbing Specialties COMMERCIAL PRODUCTS CATALOG Commercial Products Catalog Product Number Index Marking Over 75 years Of Dedication To Plumbing & Mechanical Contractors Look around Conbraco and you’ll see our commitment to serving mechanical contractors is as strong today as it was 75 years ago when we filled our first order. As the industry has grown, so has our lineup. Today, we’re designing and producing more than 120 distinct products under the Conbraco and Apollo® brand names. From our nearly 1.5 million square feet of ISO 9001 certified space, we’re turning out worldclass safety and shut-off valves, relief valves, strainers, pressure reducers and accessories, plus the most comprehensive line of U.S. made ball valves. It’s a product selection so complete, our customers can enjoy single-source convenience and accountability on products that meet or exceed stringent ASME, UL, CSA, AWWA, ASSE and IAPMO quality and performance standards. Fast deliveries from stocked regional inventories are coordinated by our network of more than 2,000 distributors. We’re investing in the future, too. During the past ten years, Conbraco has invested more than $100 million in advanced manufacturing and distribution facilities to meet our customers needs with unmatched efficiency, consistency and speed. All products, services and systems will be constantly improved to enhance our recognition for leadership and excellence by our customers and our industry. This requires that we clearly determine our customers’ requirements and consistently meet or exceed those requirements. 2 Section Series/Part No. . . . . . . . . . . . . . .Page BALL VALVES NUMBERING SYSTEM . . . . . . . . . . . . . . . . . . . . .30 3-Way, 4-Seated Ball Valve with Flanged Pump Connections . . . . . . . . . . . . . . . . . . . . . . . .27 32-100-01 Regular Port Threaded Bronze Ball Valve . . . . . . . .5 32-200-01 Regular Port Solder End Bronze Valve . . . . . . . . . . .5 64 Series Full-Port Brass Ball Valves . . . . . . . . . . . . . . . . . .29 70-100-01 Standard Port Threaded Ball Valve . . . . . . . . . . . . .6 70-100-03/04 Standard Ball Valve with Stem Extension . . . . . . . .6 70-100-07 Threaded Valve with Tee Handle . . . . . . . . . . . . . . .7 70-100-08 Threaded Ball Valve with 90° Reversed Stem . . . . . . .7 70-100-16/58 Chain Lever Ball Valves . . . . . . . . . . . . . . . . . . . . . .7 70-100-17 Threaded Valve with Rough Chrome Plating . . . . . . .7 70-100-27 Threaded Ball Valve with Latch Lock . . . . . . . . . . . .7 70-100-30 Threaded Ball Valve with Cam-Lock Handle . . . . . .8 70-100-41 Ball Valve with Automatic Drain . . . . . . . . . . . . . . .7 70-100-63 Ball Valve with Threaded and Solder Ends . . . . . . .8 70-120-01 Ball Valve With Adjustable Stop Lever . . . . . . . . .14 70-120-04 Valve w/Balancing Stop And Stem Extension . . . .14 70-140-64 250 Lb. Steam Valve . . . . . . . . . . . . . . . . . . . . . . .13 70-150-01 Ball Valve w/Standard Balancing Stop Plate . . . . . . .14 70-200-01 Standard Port Solder End Ball Valve . . . . . . . . . . .8 70-200-63 Ball Valve With Threaded And Solder Ends . . . . . . . .8 70-200-C8 Standard Port Bronze Ball Valve With 6" Female Brazed Extensions . . . . . . . . . . . . . . . . . . . . . . . . .15 70-300-01 Ball Valve With Single Union End . . . . . . . . . . . . . .9 70-600-01 Threaded 3-Way Ball Valve . . . . . . . . . . . . . . . . . .10 70-800-01 Male x Female NPT Ball Valve . . . . . . . . . . . . . . . . .9 Customer Service 1-704-841-6000 70-900-01 3-Way Diverter Valve With Solder Ends . . . . . . . .10 71-100-01 Ball Valve With Mounting Pad . . . . . . . . . . . . . . . .13 71-500-01 Ball Valve With Spring Return Handle . . . . . . . . . . . .20 75-100-41 Padlocking Ball Valve With Automatic Drain . . . . . . .24 77-100-01 Full-Port NPT Ball Valve . . . . . . . . . . . . . . . . . . . .11 77-200-01 Full-Port Solder End Ball Valve . . . . . . . . . . . . . . .12 77-200-C8 Full-Port Bronze Ball Valve With 6" Female Brazed Extensions . . . . . . . . . . . . . . . . . . . . . . . . .15 77-900-01 Full-Port SAE Straight-Thread O-Ring Boss Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . .12 77C-100 Full-Port Threaded Bronze Ball Valve . . . . . . . . . . . 4 77C-200 Full-Port Solder End Bronze Ball Valve . . . . . . . . . .4 78-100-01 Cap And Chain Valve With Threaded x 3/4 Inch Hose Connection . . . . . . . . . . . . . . . . . . . . . . . . . .27 78-114-01 SAE Male Thread Valve for Underground Service . . . . . . . . . . . . . . . . . . . . . .18 78-130 Series Female End Valve for Underground Service . . . . .18 78-250/260 Brass and Bronze Instrumentation Valves . . . . . . . . . . . .17 78-256-01 Fuel Shut-Off Valve With Mounting Ears . . . . . . . . . . .20 78-620-01 Threaded Irrigation Valve . . . . . . . . . . . . . . . . . . .18 78-664-01 Bronze Ball Valve With Center Drain . . . . . . . . . . .16 79-700-01 UL-Listed Refrigerant Ball Valve Assembly . . . . . . .15 7B-100-01 Full-Port Hydro Valve With Double Female NPT . .10 7B-300-01 Full-Port Hydro Valve With Two Female NPT Ports And Single Union End . . . . . . . . . . . . . . . . . . . . .11 7B-800-01 Male x Female Full-Port Hydro Ball Valve . . . . . . .11 7K-100-01 Full-Port Safety Exhaust Valve With 1/4" NPT Tap For Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 80-100-01: UL-Listed Gas Shut-Off Valve . . . . . .23 82-100-01: Full-Port 3-Piece Valve . . . . . . . . . . .24 82-100-19 Full-Port 3-Piece Valve With Locking Plate . . . . . .25 Commercial Products Catalog Product Number Index Section Series/Part No. . . . . . . . . . . . . .Page 82-100-63 Full-Port 3-Piece Valve with NPT & Solder Ends . .25 82-140-57 Full-Port 3-Piece Valve With 316 Stainless Steel Ball/Stem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 82-200-01 Full-Port 3-Piece Solder End Valve . . . . . . . . . .25 82-200/82-240 3-Piece Full-Port Valve With Brazed Tubing . . .26 90-100-01 UL Listed Uni-Body Threaded Ball Valve . . . . . .23 91-100-01 Threaded Uni-Body Ball Valve . . . . . . . . . . . . . . .27 94A Series: Full-Port 2-Piece Ball Valve . . . . . .12 94 MBV: Mini Ball Valve . . . . . . . . . . . . . . . . . . .17 95-200-01 Full-Port Solder End Stop And Waste Valve . . . .16 95A Series Full-Port Brass Ball Valve With Stop & Waste . .29 9A-100-01 Heavy Pattern Uni-Body Threaded Ball Valve . . .26 Dual Wye Auto Drain Ball Valve . . . . . . . . . . . . .27 GB-10 CSA-Design Certified Gas Shut-Off Valve . . . . .21 GB-15, GB-16 Series Gas Appliance Ball Valves . .21 GB-50/50A: CSA Gas Shut-Off Ball Valves . . . .22 IBV-125 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .28 IBVE-125 Series . . . . . . . . . . . . . . . . . . . . . . . . . .28 BUTTERFLY VALVE 141/143 Series Wafer/Lug Design . . . . . . . . . . . . . . . . . . . . . . . . . .31 AUTOMATION SECTION Apollo® CompacTorque™ Pneumatic Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Apollo® AE Series Electric Actuators . . . . . . . . . .33 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Valve Position Monitors . . . . . . . . . . . . . . . . . . .34 Solenoids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Positioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 RELIEF VALVES 10 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 10-600 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .59 17 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 10-322 & 10-512 ASME Section VIII Steam Safety Relief Valves . . . . . . . .39 119 Series ASME Section I & VIII Cast Iron Safety Valves . .43 12-200 Series Low Pressure Steam Boiler Safety Valves . . . . . .37 13 Series Low Pressure Steam Heating Boiler Safety Valves .38 14-200 High Capacity Low Pressure Steam Boiler Safety Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 14-400 & 14-500 Low Pressure Air Relief Valves . . . . . . . . . . . . . .39 14-600 Vacuum Relief Valves . . . . . . . . . . . . . . . . . . . . . .40 15 Series: ASME Air Relief Valve . . . . . . . . . . . .47 16-200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 16-503 & 16-504 Series . . . . . . . . . . . . . . . . . . .35 16-501 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 18C-400: Water Heater T & P Relief Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 18C-402X Series: Extended Shank Water Heater T & P Relief Valves . . . . . . . . . . . . . . . . . . . . . . . .36 18-500 Series: Corrosion Resistant Commercial T & P Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 19 Series: ASME Section I & VIII Bronze Safety Valves . . . . . . . . . . . . . . . .40-41 29 Series: ASME Section I & VIII OEM Style Bronze Safety Valves . . . . . . . . . .42 37 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 500 Series ASME Section VIII Safety Relief Valves . . . . . . . . . . . . . . . . . . . . .44-46 Drip Pan Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . .44 HYDRONIC HEATING 16-XT Series Expansion Tanks For Hydronics Systems . . . . .48 27 Series: Radiator Air Valve . . . . . . . . . . . . . . . .48 35 Series All Bronze Feed Water Pressure Regulators . . . .48 35FC Series All Bronze Hydronic Flow Check Valve . . . . . . . .49 35-403 Series: Multi-Orifice Control Valve . . . .49 35-6A3, 35-6H3 Series Combination Backflow Preventer And Feed Regulator . . . . . . . . . . . . . . . . . . . . . . .49 57 Series: Globe Valves . . . . . . . . . . . . . . . . . . . .50 58 Series: Balancing Valves . . . . . . . . . . . . . . . .50 78-668 Series Bronze Purge, Balance & Shut-off Valve . . . . . .50 WATER HEATER ACCESSORIES 40 XT Series Expansion Tanks For Potable Systems . . . . . . . .52 78 RV Series Bronze Water Heater Shut-off Valve With Thermal Expansion Control . . . . . . . . . . . . . . . . . . . . . . . .52 MIXING VALVES TV Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 34A and 34H Series . . . . . . . . . . . . . . . . . . . . . . .51 34B Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 34C Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 34D Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 PRESSURE REDUCING VALVES 36 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 36A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 36C Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 36H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 W-8078-00 Series 3/4" Hose Thread Pressure Gauges . . . . . . . . . .57 Customer Service 1-704-841-6000 BACKFLOW PREVENTERS 38-100 Series Atmospheric Type Vacuum Breaker . . . . . . . . . .85 38-200 Series Atmospheric Type Vacuum Breaker (Forged Body) . . .86 38-300 Series 3/4" Hose Connection Vacuum Breakers . . . . . .84 38-400 Series 3/4" Anti-Freeze Hose Connection Vacuum Breakers . . . . . . . . . . . . . . . . . . . . . . . . .84 38-502 Series Lab Faucet Vacuum Breaker . . . . . . . . . . . . . . . .87 40-000 Series Freeze Protection Valve . . . . . . . . . . . . . . . . . . . .88 40-100-T2 Double Check Valve Assembly . . . . . . . . . . . . . .60 40-100-TC2 Double Check Valve Assembly . . . . . . . . . . . . . .61 40-200 Series: Epoxy Coated Reduced Pressure Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69-70 40-200-T2 Series Bronze Reduced Pressure Principal . . . . . . . . . .66 40-200-T2S Stainless Steel Reduced Pressure Backflow Preventer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 40-200-TC2 Bronze Reduced Pressure Principle . . . . . . . . . .65 40-200-TCU U-Flow Bronze Reduced Pressure Principle Backflow Preventer . . . . . . . . . . . . . . . . . . . . . . . .68 40-200-TKU . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 40-200-TK5U (All RPZ, DCV, PVB & SVB) . . . .89 40-300 Series: Dual Check Valve . . . . . . . . . . . .74 40-400 Series Continuous Pressure Backflow Preventer . . . . . .77 40-700 Series Reduced Pressure Detector Assembly . . . . .82-83 4C-100 Series Carbonated Beverage Backflow Preventer . . . . .75 4D-100 & 4D-200 Series: Apollo Defender Backflow Devices . . . . . . . . . . . . . . . . . . . . . .71-72 4N-300 Series: Dual Check Valve . . . . . . . . . . . .73 4V-500 Series Freeze Resistant Vacuum Breaker . . . . . . . . . . . .78 4V-500-TC2 Series Pressure Vacuum Breaker . . . . . . . . . . . . . . . . . .79 4W-500 Series:Spill-Resistant Pressure Vacuum Breaker . . . . . . . . . . . . . . . . . . . . . . . . . .76 Model DC 4S Double Check Assemblies . . . . . . . . . . . . . . .62-64 Model DCDA 4S Double Check Detector Assembly . . . . . . . . .80-81 Air Gap Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 IN-LINE CHECK VALVE 61-100 Series Bronze Ball Cone® Check Valves . . . . . . . . . . . .91 61-200 Series Bronze Ball Cone® Check Valves . . . . . . . . . . . .91 61-500 & 62-500 Series: Soft Seat . . . . . . . . . . .92 61-600 Series: Solder End Soft Seat . . . . . . . . . .93 61-700 Series Brass NPT Mini Check Valves . . . . . . . . . . . . . . .93 62-100 Series Stainless Steel Ball Cone® Check Valves . . . . . .92 PIPELINE STRAINERS 59 Series: Bronze NPT Y Strainer . . . . . . . . . . . .94 59-300 Series Bronze Sweat End Y Strainer . . . . . . . . . . . . . . . .94 59V Series:“Mini” Strainer . . . . . . . . . . . . . . . . . .95 FC1, FC2 Cast Iron Pipe Flanged Y Strainer . . . . . . . . . . .96 Flanged Cast Bronze Y Strainers 539 Series Class 150 & 300 . . . . . . . . . . . . . . . .95 TCG Series Cast Iron Pipe Threaded Y Strainer .95 WATER GAUGE 20-100 & 20-150 Series . . . . . . . . . . . . . . . . . . .97 20-200, 20-250 & 25-200 Series . . . . . . . . . . . .97 20-300, 20-350, 25-400 & 25-500 Series . . . . . . . . . . . . . . . . . . . . . . . . . .98 20-400 & 20-410 Series . . . . . . . . . . . . . . . . . . .98 20-700 & 20-710 Series . . . . . . . . . . . . . . . . . . .99 23-600 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 20-600 & 20-800 Series . . . . . . . . . . . . . . . . . .100 24-600 & 24-650 Series . . . . . . . . . . . . . . . . . .100 20-600 & 25-600 Series . . . . . . . . . . . . . . . . . .101 24-300 & 24-350 Series . . . . . . . . . . . . . . . . . .101 21 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 23-400 & 23-450 Series . . . . . . . . . . . . . . . . . .102 Tubular Gauge Glass Protector . . . . . . . . . . . . .103 PLUMBING SPECIALTIES 26-100 & 26-300 Series . . . . . . . . . . . . . . . . . .104 27-400 Series: Steam Gauge Siphon . . . . . . . .104 31-200 & 31-500 Series: 90˚ Drain Valves . . .112 31-400 Series: Combination Tee & Drain Valves . . . . . . . . . . .113 31-600 & 31-700 Series: Angled Body Water Heater Drain Valves . . . . . .113 31B-100 Series . . . . . . . . . . . . . . . . . . . . . . . . .113 35-200 Series: Compression Bibb Faucet . . . .104 35-300 Series: Ball Valve Bibb Faucet . . . . . . .105 45-100 Series: Oil Tank Valves . . . . . . . . . . . . .105 78-124 & 78-125 Series: 5-Port Tank Selector . . . . . . . . . . . . . . . . . . . . . .105 41 Series: Air Cocks . . . . . . . . . . . . . . . . .106-107 41 Heavy & Extra Heavy Pattern Air Cocks . . .108 42-100 Series: Drain Cocks . . . . . . . . . . . . . . .108 43-100 Series: Steam Gauge Cocks . . . . . . . .109 44-100 Series: Hosed End Cocks . . . . . . . . . .109 46-100 Series: Standard Cocks . . . . . . . . . . . .109 50 Series: Manual Main Control Valves . . . . . .110 51 Series: Gas Service Cocks . . . . . . . . . . . . . .110 52 Series: Gas Service Cocks . . . . . . . . . . . . . .111 53 Series: Gas Cocks . . . . . . . . . . . . . . . . . . . . .111 54 Series: Gas Hose Cocks & Appliance Connector Valve . . . . . . . . . . . . . . . . . . . . . . . . .111 55-302 Series: Gas Cock with Throttle Adjustment . . . . . . . . . . . . . . . . . .111 56 Series: Pilot Cocks . . . . . . . . . . . . . . . . . . . .112 Terms And Conditions/Warranty . . . . . . . . . . . .115 3 Ball Valves Apollo® 77C: The Contractors’ Full-Port Bronze Ball Valves 77C-100 & 77C-200 FULL PORT BRONZE BALL VALVE WITH SOLID BALL Apollo’s® solid ball design delivers real full-port performance. Some valve manufacturers use a hollow ball in their “full-port” ball valves. A hollow ball creates turbulence inside the valve which causes significant drops in pressure and velocity. Get solid full-port performance at an affordable price with the American-made Apollo 77C. DESCRIPTION • Available with stainless steel ball and stem as 77C-140 Series (threaded), 77C-240 Series (solder) • ANSI B16.18 solder end version available as 77C-200 Series • Options - SS latch-lock handle (-27), - 2-1/4" stem extension (-04) - SS oval locking handle (-47) - CS T-handle (-07) • Machined solid chrome-plated ball • 600 psig CWP and 150 psig SWP • Multi-fill PTFE seats and seals • Adjustable packing • Blow-out proof stem design • American-made bronze castings • Vacuum service to 29 in. Hg • Full-port design through 2" 77C-100 77C-200 77C-200 77C-100 4 Model Number 77C-101 77C-102 77C-103 77C-104 77C-105 77C-106 77C-107 77C-108 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00 B 0.95 1.07 1.15 1.32 1.53 2.04 2.21 2.76 C 1.97 2.09 2.25 2.65 3.07 4.08 4.43 5.29 D 1.76 1.76 1.79 2.00 2.19 3.13 3.29 3.83 Dimensions (in.) E F G H 3.74 1.86 4.06 1.41 3.74 1.86 4.06 1.41 3.74 1.89 4.06 1.44 4.88 2.20 5.03 1.76 4.88 2.39 5.03 1.96 7.06 3.76 7.19 2.82 7.06 3.92 7.19 2.98 7.06 4.46 7.19 3.52 I 3.50 3.50 3.50 4.00 4.00 6.00 6.00 6.00 J 2.80 2.80 2.83 3.12 3.32 - K 3.12 3.12 3.12 3.12 3.12 - L 4.12 4.12 4.12 4.12 4.12 - Wt. M Cv (lbs.) -01 3.86 4.5 0.6 3.86 7.2 0.6 3.89 15.5 0.6 4.10 35.6 1.1 4.29 68.1 1.8 5.23 125.0 4.4 5.39 177.0 5.9 5.93 389.0 11.4 77C-202 77C-203 77C-204 77C-205 77C-206 77C-207 77C-208 3/8 1/2 3/4 1 1-1/4 1-1/2 2 0.37 0.50 0.75 1.00 1.25 1.50 2.00 0.93 1.15 1.39 1.69 2.08 2.33 2.95 1.84 2.31 2.79 3.38 4.16 4.66 5.84 1.76 1.79 2.00 2.19 3.13 3.29 3.83 3.74 3.74 4.88 4.88 7.06 7.06 7.06 3.50 3.50 4.00 4.00 6.00 6.00 6.00 2.80 2.83 3.12 3.32 - 3.12 3.12 3.12 3.12 - 4.12 4.12 4.12 4.12 - 3.86 7.2 0.6 3.89 15.5 0.6 4.10 35.6 1.0 4.29 68.1 1.6 5.23 125.0 3.9 5.39 177.0 5.8 5.93 389.0 10.2 1.86 1.89 2.20 2.39 3.76 3.92 4.46 4.06 4.06 5.03 5.03 7.19 7.19 7.19 1.41 1.44 1.76 1.96 2.82 2.98 3.52 Customer Service 1-704-841-6000 Ball Valves Regular Port Economy Valves 32-100-01 REGULAR PORT THREADED BRONZE BALL VALVE NPT threaded ball valve rated to 400 psig WOG cold, non-shock and 125 psig for saturated steam. Blowout-proof stem design with adjustable packing gland. DESCRIPTION • PTFE seats and MPTFE stuffing box ring • Chromium plated ball Model Number 32-101-01 32-102-01 32-103-01 32-104-01 32-105-01 32-106-01 32-107-01 32-108-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.37 0.40 0.65 0.75 1.00 1.12 1.50 B 0.80 0.80 1.00 1.20 1.55 1.72 1.93 2.17 Dimensions (in.) C D 1.60 1.65 1.60 1.65 2.00 1.68 2.41 1.90 3.09 2.18 3.44 2.53 3.87 2.69 4.37 2.94 E 2.87 2.87 2.87 3.87 4.87 5.50 5.50 5.50 32-200-01 REGULAR PORT SOLDER END BRONZE VALVE Solder end ball valve with vacuum service to 29" Hg. Rating of 400 psig WOG cold, non-shock and 125 psig for saturated steam. Blowout-proof stem design with adjustable packing gland. DESCRIPTION • PTFE seats and MPTFE stuffing box ring • Chromium plated ball Model Number 32-203-01 32-204-01 32-205-01 32-206-01 32-207-01 32-208-01 Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 A 0.40 0.65 0.75 1.00 1.12 1.50 Customer Service 1-704-841-6000 B 1.29 1.73 2.11 2.36 2.84 3.33 Dimensions (in.) C D 2.65 1.68 3.56 1.90 4.26 2.18 4.60 2.53 5.42 2.69 6.48 2.94 E 2.87 3.87 4.87 5.50 5.50 5.50 5 Ball Valves General Purpose Standard Port Valves 70-100-01 STANDARD PORT THREADED BALL VALVE This Conbraco general purpose valve is the most widely used bronze ball valve in the industry. Like all 70 Series valves, it features a blowout-proof stem, RPTFE seats and stuffing box ring, adjustable packing gland and chromium-plated ball. DESCRIPTION • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam Model Number 70-101 70-102 70-103 Size (in.) 1/4 3/8 1/2 A 0.37 0.37 0.50 Dimensions* (in.) B 1.03 1.03 1.12 C 2.06 2.06 2.25 70-104 70-105 70-106 70-107 70-108 70-109 70-100 70-10A= 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 0.68 0.87 1.00 1.25 1.50 2.00 2.50 3.12 1.50 1.68 2.00 2.18 2.34 3.12 3.37 3.68 3.00 3.37 4.00 4.37 4.68 6.25 6.75 7.37 *Body only. Total will vary with handle and end connection options. Contact Conbraco Customer Service for these dimensions. All 70-100 Series valves are available in sizes 1/4" through 4". = High capacity water valve, formerly 78-255-01 70-100-03/04 STANDARD BALL VALVE WITH STEM EXTENSION Ideal for hydronic or low pressure steam applications, this valve features a stem extension to accommodate insulation or to relocate handle position. This ball valve is equipped with chromium-plated ball, RPTFE seats and stuffing box ring, a blowout-proof stem design and adjustable packing gland. DESCRIPTION • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam 6 Customer Service 1-704-841-6000 • Specify -03 for 1-1⁄4" extension, -04 for 2-1⁄4" extension Ball Valves General Purpose Standard Port Valves 70-100-16/58 CHAIN LEVER BALL VALVES 70-100-07 Reliable quarter turn operation in overhead applications. A favorite for use in industrial environments. Standard design features include blowout-proof stem and RPTFE seats and seals. Tee handle is ideal when space is limited and where safety is a consideration. Handle still provides visual indication of OPEN or CLOSED position. Valve features a chromium-plated ball, RPTFE seats and stuffing box ring, a blowoutproof stem design and adjustable packing gland. • Specify suffix -16 for assembly with valve in vertical position • Specify -58 for valve in horizontal position 70-100-08 THREADED BALL VALVE WITH 90° REVERSED STEM THREADED VALVE WITH TEE HANDLE • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam 70-100-17 Use in critical applications when handle is required to be in a parallel position when closed. Features chromium-plated ball, RPTFE seats and stuffing box ring. Rated 600 psig WOG, cold, non-shock; 150 psig for saturated steam. THREADED VALVE WITH ROUGH CHROME PLATING Use where a clean environment is required; for matching up with other chrome-plated equipment. Features a chromium-plated ball, RPTFE seats and stuffing box ring, a blowout-proof stem design and adjustable packing gland. • Blowout-proof stem design • Adjustable packing gland • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam 70-100-27 THREADED BALL VALVE WITH LATCH LOCK Sliding lock mechanism secures handle in open or closed position. Valve can also be padlocked open or closed. Valve features blowout proof stem, RPTFE seats and stuffing box ring, chrome plated ball and adjustable packing gland. • 600 psig WOG, cold, non-shock • 150 psig for saturated steam • Available with auto drain option for pneumatic applications. Use the following suffix key to specify latch lock valve with auto drain option: -27 -41 Customer Service 1-704-841-6000 70-100-41 BALL VALVE WITH AUTOMATIC DRAIN When this valve is shut-off for maintenance of pneumatic tool, pressure from valve to tool is automatically drained to atmosphere to prevent accidental operation of the tool, causing possible injury. • Conforms to certain OSHA requirements in pneumatic installations • Easy, safe maintenance of pneumatic tools • Cannot be used where drained media could cause damage • Temperature range = 50°F to 200°F • Rated 125 psig air or water • Available with latch lock option, specify -27 -41 suffix 7 Ball Valves General Purpose Standard Port Valves 70-100-30 70-100-63 THREADED BALL VALVE WITH CAM-LOCK® HANDLE BALL VALVE WITH THREADED AND SOLDER ENDS Eliminates need for special pipe connector when connecting to different pipe such as iron pipe or copper tubing. Valve offers reliable shut-off and easy quarterturn operation; ruggedly built with a chromium-plated ball, a blowout-proof stem design and RPTFE seats and stuffing box ring. Patented Cam-Lock® handle gives valve extra protection against accidental operation. Reliable quarter-turn shut-off from a versatile, ruggedly built valve. • RPTFE seats and stuffing box ring • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam • Rated 600 psig WOG, cold, non-shock • Body is threaded, retainer is solder end 70-200-01 SOLDER END BALL VALVE Reliable ball valves designed for soft-soldering into lines without the need for disassembly. Tested valve installs without disturbing seats and seals. Soldering temperature: 500°F or less. DESCRIPTION • RPTFE seats and stuffing box ring • Vacuum service to 29” Hg • Adjustable packing gland Model Number 70-202 70-203 70-204 70-205 70-206 70-207 70-208 70-209 70-200 Size (in.)* 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 A 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.00 2.50 B 1.28 1.43 1.93 2.25 2.31 2.62 3.18 3.74 4.12 Dimensions (in.) C D E 2.56 1.75 3.87 2.87 1.75 3.87 3.87 2.12 4.87 4.50 2.25 4.87 4.62 2.62 5.50 5.25 3.06 8.00 6.37 3.25 8.00 8.00 3.72 7.51 8.25 4.12 8.00 F 0.505 0.63 0.88 1.13 1.38 1.63 2.13 2.63 3.13 G 0.37 0.50 0.75 0.90 0.96 1.09 1.34 1.48 1.67 *Based on 70-200-01 – Dimensions may vary with options. Contact Conbraco customer service for dimensions on 70-200-63. 70-200-63 BALL VALVE WITH THREADED AND SOLDER ENDS Eliminates special pipe connector for connecting dissimilar piping such as iron and copper. Reliable shut-off and easy quarter-turn operation. Features chromium-plated ball, a blowoutproof stem design and RPTFE seats and stuffing box ring. DESCRIPTION • 150 psig for saturated steam • Rated 600 psig WOG, cold, non-shock 8 Customer Service 1-704-841-6000 • Body is solder, retainer is threaded Ball Valves General Purpose Standard Port Valves 70-300-01 BALL VALVE WITH SINGLE UNION END This valve combines pipe union with ball valve shut-off; it saves time and labor by eliminating the need for extra connections. Viton O-Ring sealed union requires light torque for proper seal. DESCRIPTION • Adjustable packing gland • Chromium-plated ball • Blowout-proof stem design Model Number 70-301-01 70-302-01 70-303-01 70-304-01 70-305-01 70-306-01 70-307-01 70-308-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 B 1.90 1.90 2.01 2.46 2.78 2.68 2.87 3.25 Dimensions (in.) C D 2.93 1.75 2.93 1.75 3.14 1.81 3.96 2.12 4.46 2.25 4.68 2.62 5.06 3.05 5.59 3.24 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 70-800-01 MALE X FEMALE NPT BALL VALVE Eliminates need for extra nipple when connecting to female connection to save time and labor. Ruggedly built for lasting performance with chromium-plated ball and blowout-proof stem design. DESCRIPTION • RPTFE seats and stuffing box ring • Vacuum service to 29" Hg. Model Number 70-801-01 70-802-01 70-803-01 70-804-01 70-805-01 70-806-01 70-807-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 B 1.40 1.46 1.68 2.00 2.31 2.31 3.00 Dimensions (in.) C D 2.43 1.75 2.50 1.75 2.81 1.81 3.50 2.12 4.00 2.25 4.31 2.62 5.18 3.06 E E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 D A B C Customer Service 1-704-841-6000 9 Ball Valves Diverter Valves 70-600-01 THREADED 3-WAY BALL VALVE Ideal for applications requiring flow diversion, this valve combines the features of two 2-way valves. Its large ports make tank selection and fluid transfers simpler. Easy quarter-turn operation. Drilled and tapped mounting pad for panel mounting. DESCRIPTION • 100 percent air tested under water • 400 psig WOG rating Model Size Number (in.) 70-601-01 1/4 70-602-01 3/8 70-603-01 1/2 70-604-01 3/4 70-605-01 1 70-606-01 1-1/4 70-607-01 1-1/2 70-608-01 2 70-900-01 A 0.37 0.37 0.50 0.68 0.81 1.00 1.25 1.50 B 1.12 1.12 1.09 1.50 1.59 1.97 2.21 2.34 Dimensions (in.) C D E F 2.32 1.80 3.88 1.18 2.32 1.80 3.88 1.18 2.25 1.75 3.87 1.18 3.00 2.12 4.87 1.62 3.18 2.25 4.87 1.71 3.95 2.69 5.50 2.01 4.40 2.87 5.50 2.38 4.69 3.00 5.50 2.50 G 0.875 0.875 0.87 0.87 0.87 0.93 0.94 0.94 H 1.37 1.37 1.37 1.37 1.37 1.50 1.50 1.50 I 10-24 10-24 10-24 10-24 10-24 1/4-20 1/4-20 1/4-20 3-WAY DIVERTER VALVE WITH SOLDER ENDS Tank selection and fluid transfers are easier because of this diverter valve’s large ports. Rated 400 psig WOG. The valve is 100 percent air tested under water. DESCRIPTION • Many long service life features • Simple quarter-turn operation Model Number 70-903-01 70-904-01 70-905-01 Size (in.) 1/2 3/4 1 A 0.50 0.68 0.81 B 1.44 1.94 2.19 Dimensions (in.) C D E F G 2.87 1.75 3.87 1.34 0.628 3.87 2.12 4.87 1.69 0.878 4.42 2.25 4.87 1.87 1.129 H 0.50 0.90 0.90 TWO-PIECE FULL-PORT VALVES 7B-100-01 FULL-PORT HYDRO VALVE WITH DOUBLE FEMALE NPT Design features tee handle and side tapping; can be used as a drain feature or with 1/8" and 1/4" test cocks. Valve offers extended service life with its chromium-plated ball and RPTFE seats and stuffing box ring. DESCRIPTION • Rated 400 psig WOG, cold, non-shock Model Number 7B-101-01 7B-102-01 7B-103-01 7B-104-01 7B-105-01 7B-106-01 7B-107-01 7B-108-01 10 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00 B 1.03 1.03 1.09 1.28 1.66 1.87 2.05 2.47 Customer Service 1-704-841-6000 • Blowout-proof stem design Dimensions (in.) C D E F 2.06 1.37 2.68 0.93 2.06 1.37 2.68 0.93 2.18 1.43 2.68 1.00 2.68 1.62 3.00 1.12 3.43 1.90 4.00 1.31 3.87 2.18 4.00 1.62 4.22 2.60 5.62 1.81 5.02 2.95 5.62 2.18 G 0.53 0.53 0.53 0.75 0.94 1.15 1.31 1.68 H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT Ball Valves Two-Piece Full-Port Valves 7B-300-01 FULL-PORT HYDRO VALVE WITH TWO FEMALE NPT PORTS AND SINGLE UNION END Valve offers union ends to make assembly and disassembly easier. Rated 400 psig WOG, cold, non-shock, it is equipped with a rugged chromium-plated ball and PTFE seats and stuffing box ring. DESCRIPTION • Full flow, minimum pressure drop • Stem designed to be blowout-proof Model Size Number (in.) 7B-301-01 1/4 7B-303-01 1/2 7B-304-01 3/4 7B-305-01 1 7B-307-01 1-1/2 7B-308-01 2 A 0.37 0.50 0.75 1.00 1.50 2.00 B 2.13 2.21 2.25 2.71 3.43 4.00 Dimensions (in.) C D E F 2.92 1.37 2.68 0.93 3.08 1.43 2.68 0.93 3.67 1.62 3.00 1.12 4.50 1.90 4.00 1.31 5.62 2.60 5.62 1.81 6.56 2.95 5.62 2.18 G 0.53 0.53 0.75 0.94 1.31 1.68 H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT MALE X FEMALE FULL-PORT HYDRO BALL VALVE 7B-800-01 Eliminates leak path and need for extra nipples. Full-Port design assures full flow and minimum pressure drop. Long-life features include adjustable packing gland, chromium-plated ball and RPTFE stuffing box ring. DESCRIPTION • 400 psig WOG, cold, non-shock • Rated 125 psig for saturated steam Model Number 7B-801-01 7B-802-01 7B-803-01 7B-804-01 7B-805-01 7B-806-01 7B-807-01 7B-808-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00 B 1.40 1.46 1.68 1.88 2.39 2.66 2.86 3.34 Dimensions (in.) C D E F 2.43 1.37 2.56 0.93 2.50 1.37 2.56 0.93 2.78 1.43 2.56 1.00 3.28 1.70 2.68 1.12 4.17 1.93 3.62 1.31 4.66 2.13 3.62 1.62 5.03 2.71 5.12 1.81 5.89 3.06 5.12 2.18 G 0.53 0.53 0.53 0.75 0.94 1.15 1.31 1.68 H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT FULL-PORT NPT AND SOLDER BALL VALVE 77-100-01 Designed for easy actuator mounting or panel mounting where highest Cv values are required. Chromium-plated ball and RPTFE seats and stuffing box ring. Also available with solder connections and 250 lb. steam trim option. DESCRIPTION • Full flow and minimum pressure drop • Extended stems optional Model Number 77-101-01 77-102-01 77-103-01 77-104-01 77-105-01 77-106-01 77-107-01 77-108-01 77-109-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 A 0.43 0.50 0.50 0.81 1.00 1.25 1.50 2.00 2.50 B 1.12 1.12 1.12 1.56 1.81 2.12 2.37 2.65 3.25 Customer Service 1-704-841-6000 • Chain lever kits available 3⁄4" - 2 1⁄2" C 2.25 2.25 2.25 3.12 3.62 4.25 4.75 5.37 6.50 Dimensions (in.) D E 1.81 3.87 1.81 3.87 1.81 3.87 2.12 4.87 5.50 2.62 2.87 5.50 3.34 8.00 3.71 8.00 8.00 4.12 F 0.50 0.50 0.50 0.87 0.93 0.93 2.08 2.41 2.75 G 1.12 1.12 1.12 1.37 1.50 1.50 3.06 3.52 3.37 11 Ball Valves Two-Piece Full-Port Valves FULL-PORT SOLDER END BALL VALVE The 70-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500˚F. 77-200-01 DESCRIPTION • RPTFE seats and stuffing box ring • Full port for full flow & min. pressure drop • Adjustable packing gland • Chromium plated ball • Blow-out-proof stem design Model Number 77-204-01 77-205-01 77-206-01 77-207-01 77-208-01 77-209-01 77-900-01 Size (in.) 3/4 1 1-1/4 1-1/2 2 2-1/2 A 0.81 1.00 1.25 1.50 2.00 2.50 B 2.12 2.33 2.60 3.00 3.62 3.93 C 4.12 4.60 5.15 6.00 7.24 7.87 Dimensions (in.) D 2.12 2.62 2.87 3.34 3.71 4.12 E 4.87 5.50 5.50 8.00 8.00 8.00 F 0.88 1.13 1.38 1.63 2.13 2.63 G 0.75 0.90 0.96 1.09 1.34 1.48 FULL-PORT SAE STRAIGHT-THREAD O-RING BOSS BALL VALVES Apollo® full-port SAE straight thread ball valves with O-Ring boss connections are designed for extended leak-free and energy saving performance in a broad range of applications, especially in manufacturing environments. Their straight thread sealing technology is in high demand in the automotive industries and in fluid power applications. Sizes 1/4" to 2". Rated 600 WOG cold non-shock, 150 psig steam. DESCRIPTION • Chrome plated ball standard • Blowout-proof stem and lever handle standard • Drilled and tapped actuation pad standard Model Nom. Tube Number O.D. (in.) 1/4 77-901-01 77-902-01 3/8 77-903-01 1/2 77-904-01 3/4 77-905-01 1 77-906-01 1-1/4 77-907-01 1-1/2 77-908-01 2 94A SERIES Size (in.) 7/16-20 9/16-18 3/4-16 11/16-12 15/16-12 1-5/8-12 1-7/8-12 2-1/2-12 A 0.43 0.50 0.50 0.81 1.00 1.25 1.50 2.00 B 1.12 1.12 1.12 1.56 1.81 2.12 2.37 2.65 Dimensions (in.) C D E 2.25 1.81 3.87 2.25 1.81 3.87 2.25 1.81 3.87 3.12 2.12 4.87 3.62 2.62 5.50 4.25 2.87 5.50 4.75 3.34 8.00 5.37 3.71 8.00 F 0.50 0.50 0.50 0.87 0.93 0.93 2.08 2.41 G 1.12 1.12 1.12 1.37 1.50 1.50 3.06 3.52 NEW 94A FULL-PORT SERIES BALL VALVES New 94A Series Ball Valves from Apollo® International are built for maximum reliability with minimum investment. Ideal in new and retrofit applications, these full-port ball valves with forged brass body are UL listed and CSA approved. Series 94A ball valves in sizes 1/4" through 4" offer a rated working pressure of 600 psig WOG, 150 psig WSP. DESCRIPTION • Silicone free • Adjustable stem packing nut 12 Part No. 94A-101-01 94A-102-01 94A-103-01 94A-104-01 94A-105-01 94A-106-01 94A-107-01 94A-108-01 94A-109-01 94A-100-01 94A-10A-01 Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" A 0.395 0.407 0.583 0.748 0.945 1.260 1.575 1.969 2.520 2.953 3.945 94A-203-01 94A-204-01 94A-205-01 94A-206-01 94A-207-01 94A-208-01 94A-209-01 94A-200-01 94A-20A-01 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 0.583 0.748 0.945 1.260 1.575 1.969 2.520 2.953 3.945 NPT B C 1.746 1.278 1.756 1.278 2.047 1.921 2.362 2.087 2.559 2.756 3.307 2.953 3.661 3.346 4.181 3.681 5.378 4.764 6.039 5.079 7.386 5.868 Sweat 2.047 1.839 1.996 2.748 3.228 2.441 3.819 2.854 4.425 3.169 5.315 3.449 6.263 4.764 7.150 5.079 7.386 5.868 Customer Service 1-704-841-6000 D 3.543 3.543 3.543 3.780 4.528 4.528 5.512 5.512 8.661 8.661 9.606 E 3.543 3.780 4.528 4.528 5.512 5.512 8.661 8.661 9.606 0.630 0.878 1.130 1.378 1.630 2.130 2.630 3.130 4.130 - Wt. (Lb.) 0.33 0.30 0.44 0.66 1.10 1.57 2.40 3.37 7.60 9.36 16.86 0.38 0.64 0.99 1.40 2.17 2.97 6.36 8.32 15.78 CSA listed (File # 226234) per the following standards: CAN 1-9.1 CGA 3.16 CGA CR91-002 ANSI Z21.15 IAS-US Requirement 3-88 ANSI/ASME B16.33 1/2 psig 125 psig 5 psig 1/2 psig 5 psig 125 psig UL listed (File # MH18844) per the following guides: LP-Gas Shut-Off Valves (YSDT) Manual Valves (MHKZ) Compressed Gas Shut-Off Valves (YQNZ) Flammable Liquid Shut-Off Valves (YRBX) Gas Shut-Off Valves (YRPV) FM and NSF in process Ball Valves Standard Port Two-Piece Valve w/Mounting Pad 71-100-01 BALL VALVE WITH MOUNTING PAD Valve designed to easily accommodate spring return handle, actuator or simple panel mounting. Threaded end connections with RPTFE seats and stuffing box ring. Standard port. DESCRIPTION • 3⁄4" to 3" models (See 77 Series for 1/4"-1/2") Model Size (in.) Number 71-104-01 3/4 71-105-01 1 71-106-01 1-1/4 71-107-01 1-1/2 71-108-01 2 71-100-01 3 A 0.68 0.87 1.00 1.25 1.50 2.50 B 1.50 1.68 2.00 2.18 2.34 3.37 • Round handle optional Dimensions (in.) C D E F 3.00 2.12 4.87 0.87 3.37 2.25 4.87 0.87 4.00 2.62 5.50 0.93 4.37 2.87 8.00 0.93 4.68 3.06 8.00 0.93 6.75 4.12 8.00 N/A G 1.37 1.37 1.50 1.50 1.50 2.75 H 10-24 NC 10-24 NC 1/4-20 NC 1/4-20 NC 1/4-20 NC 1/4-20 NC 3/4" - 2" Size Steam Valves 70-140-64 250 LB. STEAM VALVE Designed for reliable operation on high pressure steam systems and with fluids of widely varying temperatures. Ideal for use with high thermal expansion rates. Stainless steel ball and stem standard. Ball has a thermal relief hole drilled into stem slot. DESCRIPTION • Special high-temperature MTFE stem packing • Stainless steel ball and stem • Multi-filled RPTFE seats Model Number 70-141-64 70-142-64 70-143-64 70-144-64 70-145-64 70-146-64 70-147-64 70-148-64 70-140-64 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 3 A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50 Dimensions (in.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.75 1.50 3.00 2.12 3.37 2.25 1.68 2.00 4.00 2.62 2.18 4.37 3.06 2.34 4.68 3.25 3.37 6.75 4.12 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 (*Also available in 71 & 77 Series) Customer Service 1-704-841-6000 13 Ball Valves Hydronic Valves 70-120-01 BALL VALVE WITH ADJUSTABLE STOP LEVER This versatile hydronic valve provides easy screw controlled incremental balancing adjustments when variation is needed. Special design makes a model combination shut-off and balancing valve. E D 70-120-04 Model Number 70-121-01 70-122-01 70-123-01 70-124-01 70-125-01 70-126-01 70-127-01 70-128-01 70-129-01 70-120-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50 2.50 Dimensions (in.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.75 1.50 3.00 2.12 1.68 3.37 2.25 2.00 4.00 2.62 2.18 4.37 3.06 2.34 4.68 3.25 3.25 6.50 4.12 3.37 6.75 4.12 E 3.87 3.87 3.87 4.87 4.87 5.56 5.56 5.56 5.56 5.56 VALVE WITH BALANCING STOP AND STEM EXTENSION Ideal for HVAC systems, valve offers a balancing stop plate and a 2-1/4" stem extension combination to accommodate insulation and handle repositioning. Rated 600 psig WOG, cold, non-shock; 150 psig for saturated steam. DESCRIPTION • Chromium-plated ball • RPTFE seats, stuffing box ring • Blowout-proof stem design and adjustable packing gland 70-150-01 • Contact customer service for exact handle dimensions BALL VALVE WITH STANDARD BALANCING STOP PLATE Designed for hydronic applications, this valve comes with a simple stop plate that fits over its standard lever handle. Also available with tee or round handles. Features a chromium-plated ball, RPTFE seats and stuffing box ring, a blowout-proof stem design and adjustable packing gland. DESCRIPTION • Rated 600 psig WOG, cold, non-shock 14 Customer Service 1-704-841-6000 • 150 psig for saturated steam Ball Valves “Safe” Solder Valves (Two-Piece) BRONZE STANDARD PORT BALL VALVE WITH 6" FEMALE BRAZED EXTENSIONS (SOLDER CUP) See page 26 for three piece version. 70-200-C8 Solder end, 600 psig WOG, cold non-shock. 150 psig Saturated Steam. DESCRIPTION • RPTFE seats and stuffing box ring • Blow-out proof stem design • Chromium plated ball • Adjustable packing gland Model Number 70-203-C8 70-204-C8 70-205-C8 70-206-C8 70-207-C8 70-208-C8 70-209-C8A 70-200-C8 Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 A 0.50 0.68 0.87 1.00 1.25 1.50 2.00 2.50 B 1.43 1.93 2.25 2.31 2.62 3.18 3.74 4.12 Dimensions (in.) C D E F 2.87 1.75 3.87 0.63 3.87 2.12 4.87 0.88 4.50 2.25 4.87 1.13 4.62 2.62 5.50 1.38 5.25 3.06 8.00 1.63 6.37 3.25 8.00 2.13 7.51 3.75 8.00 2.63 8.25 4.12 8.00 3.13 G 0.50 0.75 0.90 0.96 1.09 1.34 1.48 1.67 H 14.87 15.87 16.50 16.62 17.25 18.37 19.51 20.25 BRONZE FULL-PORT BALL VALVE WITH 6" FEMALE BRAZED EXTENSIONS (SOLDER CUP) 77-200-C8 Solder end, 600 psig WOG, Cold Non-shock. 150 psig Saturated Steam. DESCRIPTION • RPTFE seats and stuffing box ring • Blow-out proof stem design • Full-Port for full flow and min. pressure drop • Chromium plated ball • Adjustable packing gland Model Number 77-204-C8 77-205-C8 77-206-C8 77-207-C8 77-208-C8 77-209-C8 Size (in.) 3/4 1 1-1/4 1-1/2 2 2-1/2 A 0.81 1.00 1.25 1.50 2.00 2.50 B 2.12 2.33 2.60 3.00 3.62 3.93 Dimensions (in.) C D E F 4.12 2.12 4.87 0.88 4.64 2.62 5.50 1.13 5.15 2.87 5.50 1.38 6.00 3.34 8.00 1.63 7.24 3.71 8.00 2.13 7.87 4.12 8.00 2.63 G 0.75 0.90 0.96 1.09 1.34 1.48 H 16.12 16.64 17.15 18.00 19.24 19.87 UL-LISTED REFRIGERANT BALL VALVE ASSEMBLY 79-700-01 Built for easy installation and long service life. Complete hermetically welded assembly includes copper extensions and forged brass refrigerant ball valve with capped, triple-sealed stem to reduce leaks. Sizes from 3/8" to 3-1/8" O.D. Tube. Chrome plated ball; RPTFE seats and seals. DESCRIPTION • Full-port through 2-5⁄8" • Bi-directional flow design Model Number 79-701-01 79-702-01 79-703-01 79-704-01 79-705-01 79-706-01 79-707-01 79-708-01 79-709-01 79-600-01 Size (in.) 3/8 1/2 5/8 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 • All sizes UL listed Dimensions (in.) A B C D 3.38 6.45 0.45 1.56 1.56 6.45 0.45 3.38 3.56 6.82 0.50 1.56 1.79 7.53 0.68 3.91 4.39 8.51 0.87 1.98 4.42 8.94 1.25 2.62 9.19 1.25 2.62 4.55 5.16 10.31 1.50 2.93 3.90 6.50 13.00 2.50 7.00 14.00 2.50 3.90 E 0.38 0.38 0.50 0.75 0.90 0.96 1.09 1.34 1.48 1.67 F 0.38 0.50 0.62 0.87 1.12 1.38 1.62 2.12 2.62 3.12 Cv* 8.5 8.5 9.8 32.0 44.0 66.0 148.0 218.0 440.0 390.0 *The Cv factor is the gallons of water per minute that the valve will pass with 1 psig pressure drop. Customer Service 1-704-841-6000 15 Ball Valves Purge & Drain Valves 78-664-01 BRONZE BALL VALVE WITH CENTER DRAIN Center tap drain allows for winterization or purge and drain function. Features bronze body with built-in mounting pad for panel mounting or actuation. Chrome plated ball, RPTFE seats and stuffing box ring are standard, as are stainless steel lever and nut. Ideal for hydronic heating and marine applications. Sizes 3⁄4" through 2". 10-24 NC ALL SIZES 95-200-01 Model Size Number (in.) 78-664-01 3/4 78-665-01 1 78-666-01 1-1/4 78-667-01 1-1/2 78-962-01 2 A 0.68 0.87 1.00 1.25 1.50 B 1.50 1.68 2.00 2.18 2.34 Dimensions (in.) C D E 3.00 2.12 4.87 3.37 2.25 4.87 4.00 2.62 5.50 4.37 3.05 8.00 4.68 3.24 8.00 F 0.87 0.87 0.93 0.93 0.93 G 1.37 1.37 1.50 1.50 1.50 H 0.17 0.21 0.28 0.40 0.45 FULL-PORT SOLDER END STOP AND WASTE VALVE Perfect choice for hydronic and water systems where system draining is required. Replaces globe style stop and waste valves. Designed to be soft soldered into lines with no disassembly. DESCRIPTION • Rated 400 psig WOG, cold non-shock • Drain cap designed to prevent fluid loss Model Number 95-203-01 95-204-01 95-205-01 16 Size (in.) 1/2 3/4 1 A 0.50 0.81 1.00 B 1.43 2.12 2.21 Customer Service 1-704-841-6000 • Adjustable packing gland Dimensions (in.) C D E 2.87 1.75 3.87 4.12 2.15 4.87 4.43 2.43 4.87 F 0.63 0.88 1.13 G 0.50 0.75 0.90 Ball Valves Instrumentation Valves BRASS AND BRONZE INSTRUMENTATION BALL VALVES 78-250/260 Male x Female Threaded. 400 psig WOG, Cold Non Shock. Air & Liquid Service Rating. DESCRIPTION • Micro-finish ball • Blow-out-proof stem design • PTFE seats • Nitrile stem seal • Plated steel tee handle • Compact design • Optional mixed end fittings available 78-250: Bronze 78-260: Brass BRASS INSTRUMENTATION BALL VALVE- Tee Handle Model Size Dimensions (in.) Number (in.) A B C D E Cv* Wt. 1/8M X 1/8F 0.21 0.37 1.43 0.87 1.25 4.00 0.20 78-260-05 78-261-05 1/4M X 1/4F 0.31 0.43 1.43 0.87 1.25 5.50 0.19 BRASS INSTRUMENTATION BALL VALVE - Screw Slot Model Size Dimensions (in.) Number (in.) A B C D E Cv* 78-262-05 1/8M X 1/8F 0.21 0.37 1.43 0.75 N/A 4.00 78-263-05 1/4M X 1/4F 0.31 0.43 1.43 0.75 N/A 5.50 Wt. 0.20 0.19 BRONZE INSTRUMENTATION BALL VALVE - Screw Slot Model Size Dimensions (in.) Number (in.) A B C D E Cv* 1/8M X 1/4F 0.21 0.80 1.60 0.72 N/A 4.00 78-257-01 78-258-01 1/4M X 1/4F 0.31 0.80 1.60 0.72 N/A 5.50 Wt. 0.19 0.19 BRONZE INSTRUMENTATION BALL VALVE - Lever Handle Model Size Dimensions (in.) Number (in.) A B C D E Cv* 1/4M X 1/4F 0.25 0.65 1.45 0.93 1.37 5.50 78-267-01 Wt. 0.20 *The Cv factor is the gallons of water per minute that the valve will pass with a 1 psig pressure drop. 94 MBV MINI BALL VALVE The Mini Ball Valve is designed for steam, water, oil or gas in commercial and light industrial use. The mini-valves are a competitive, conventional port, constructed of heavy-duty forged brass, 100% Teflon® seats and gland follower with double viton o-rings, to prevent stem leakage. The valves are equipped with a reversible handle for tight space applications. The valve connections are manufactured in accordance with ANSI B1.20.1. The valves are pressure rated to a maximum of 600 psig at 100°F. Rated service temperature ranges are from -40°F to 300°F. DESCRIPTION • Reversible Handle • Rugged Forged Construction • Greater Flow Rate • Blow Out Proof Stem • Double Viton O-rings Model Number 94MBV01 94MBV02 94MBV03 94MBV04 94MBV05 Size (in.) 1/4 FNPT x 1/8 MNPT 1/4 FNPT x 1/4 MNPT 1/4 FNPT x 1/4 FNPT 1/8 FNPT x 1/8 MNPT 1/8 FNPT x 1/8 FNPT Customer Service 1-704-841-6000 • Large Raised Wrench Flats • Chrome Plated Brass Ball • Each Mini is Air-Tested Twice: In the Open and Closed Position • Use as a Non-leak Gauge Cock/Test Cock • Perfect for O.E.M. Applications Dimensions (in.) A B C 1.25 1.67 1.96 2.04 1.15 1.67 1.63 1.28 1.67 1.20 1.67 1.97 1.61 1.23 1.67 Internal Ø 0.31 0.31 0.31 0.31 0.31 Wt. (lbs.) 0.19 0.20 0.17 0.16 0.16 17 Ball Valves Irrigation Valves 78-620-01 THREADED IRRIGATION VALVE Ideal for underground use or where drained media will not cause damage. Auto-drain feature is standard. Features a stainless steel cover, chromium-plated ball, adjustable packing gland, RPTFE seats and seals and blowout-proof stem design. DESCRIPTION • Rated 200 psig water, cold, non-shock • Temperature range: +50°F to 200°F Model Number 78-621-01 78-622-01 78-623-01 78-624-01 78-625-01 78-130 Size (in.) 3/4 1 1-1/4 1-1/2 2 A 0.68 0.87 1.00 1.25 1.50 Dimensions (in.) B C D 1.47 2.96 2.40 1.66 3.34 2.53 1.98 3.97 3.00 2.12 4.28 3.18 2.35 4.67 3.37 E 1.81 1.81 2.50 2.50 2.50 FEMALE END VALVE FOR UNDERGROUND SERVICE The 78-130 Series is ideal for underground or below grade applications. This series (1/4" - 2" FNPT) features a square head nut welded to the stem to allow operations with a ground key from standard grade. 78-114-01 SAE MALE THREAD VALVE FOR UNDERGROUND SERVICE The 78-114-01 features the same square head nut as the 78-130 Series but with an optional SAE male thread on one end. Apollo® valves can be manufactured with a variety of end connections to meet your specific underground service requirements. 18 Customer Service 1-704-841-6000 Ball Valves Air Exhaust Valves FULL-PORT SAFETY EXHAUST VALVE WITH 1/4" NPT TAP FOR DRAIN 7K-100-01 Built for easy installation and long service life. For use on pneumatic equipment where full flow is required. Standardly furnished with a 1/4" NPT tapped drain to accommodate a muffler or to pipe the exhausted air to a safe location. For optional stainless steel latch lock handle that locks in the closed position only, specify suffix (-46). DESCRIPTION • Sizes 1⁄4 " through 2-1⁄2" • FNPT Threads • Rated 125 psig – air or water • Temperature range: +50°F to +200°F Model Number 7K-101-01 7K-102-01 7K-103-01 7K-104-01 7K-105-01 7K-106-01 7K-107-01 7K-108-01 7K-109-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 A 0.37 0.37 0.50 0.81 1.00 1.25 1.50 2.00 2.50 B 1.03 1.03 1.10 1.56 1.80 2.12 2.37 2.70 3.25 C 2.06 2.06 2.19 3.12 3.61 4.25 4.74 5.38 6.50 D 1.75 1.75 1.75 2.12 2.62 2.87 3.30 3.71 4.05 Dimensions (in.) E F G 3.87 N/A N/A 3.87 N/A N/A 3.87 N/A N/A 4.78 0.87 1.37 5.50 0.93 1.50 5.50 0.93 1.50 7.78 2.08 3.06 7.78 2.41 3.52 7.78 2.75 3.37 H 0.09 0.09 0.12 0.29 0.31 0.37 0.50 0.62 1.09 I 0.53 0.53 0.59 0.90 1.12 1.37 1.56 2.03 2.34 J 1.18 1.18 1.25 1.56 1.78 2.03 2.21 2.68 3.00 K N/A N/A N/A 0.90 1.12 1.37 1.28 1.56 2.00 Also available in 70 & 77 Series as - 41 option (without tapped drain) Customer Service 1-704-841-6000 19 Ball Valves Gas/Fuel Shut-Off Valves 71-500-01 VALVE WITH SPRING RETURN HANDLE Ideal in applications where the valve must be in OFF position at all times such as feeding fuel lines. Can be used in reverse with 90° reverse stem option. Basic configuration: spring return to CLOSED. All lever components are stainless steel. DESCRIPTION • Spring return to OPEN optional • Torque nearly three times that of standard valves Model Size Number Size (in.) 1/4 71-501-01 71-502-01 3/8 71-503-01 1/2 71-504-01 3/4 71-505-01 1 71-506-01 1-1/4 71-507-01 1-1/2 71-508-01 2 78-256-01 A 0.43 0.50 0.50 0.68 0.87 1.00 1.25 1.50 Dimensions (in.) B C 1.12 2.25 1.12 2.25 1.12 2.25 1.50 3.00 1.68 3.37 2.00 4.00 2.18 4.37 2.34 4.68 D 7.00 7.00 7.00 7.00 7.00 9.00 9.00 9.00 FUEL SHUT-OFF VALVE WITH MOUNTING EARS Excellent for use with liquid fuels and often specified as a fuel tank shut-off valve in marine applications. All wetted parts are brass or cast bronze. Features include mounting ears for easy, positive installation; 400 psig service rating tested to 100 psig air under water. Optional tee handle saves space and still provides fast 90˚ on/off. DESCRIPTION • NPT threaded, both ends • RPTFE seats and seals Model Number 78-248-01 78-250-01 78-256-01 78-438-01 20 Size (in.)* 1/4 3/8 1/2 3/4 A 0.43 0.43 0.50 0.68 B 1.12 1.12 1.12 1.50 Customer Service 1-704-841-6000 Dimensions (in.) C D E 2.25 1.78 3.87 2.25 1.78 3.87 3.87 1.78 2.25 3.00 2.12 4.87 F 0.93 0.93 0.93 1.06 G 1.87 1.87 1.87 2.12 Ball Valves Gas/Fuel Shut-Off Valves GB-10 SERIES CSA GAS SHUT-OFF VALVES Manual shut-off valves engineered specifically for low-pressure gas service. Canadian Standard Association design and capacity certified with American-made quality. High-copper content body, chrome-plated ball, PTFE seats. Rated for temperatures from 32˚F to 125˚F at pressures of 1/2 and 5 PSIG. DESCRIPTION • Complies with ANSI Z21.15, CR91-002, and ASME 16.44 • Lever or tee handle options available • Use with natural, manufactured, mixed and liquefied petroleum gases, LP gas-air mixtures • Standard die-cast zinc “wing” handle, epoxy coated, for easy shut-off Model Number 51GB201 51GB301 51GB401 51GB501 Size (in.) 3/8 1/2 3/4 1 Connection 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT BTU/Hr* 318,700 623,750 1,265,000 2,037,500 G Standard, yellow die-cast Zinc “wing handle.” F B A * Capacity based on a gas having a heating value of 1000 Btu/cubic feet and an S.G. of 0.64 at a P.D. of 1" W.C. D Size (in.) 3/8 1/2 3/4 1 A 2.04 2.24 2.97 3.33 B 1.06 1.18 1.55 1.81 Dimensions (in.) C D E 0.38 3.85 2.24 0.50 3.85 2.30 0.69 4.75 2.85 0.88 4.75 3.10 F 2.20 2.24 2.90 3.15 G 0.81 0.81 1.00 1.00 Optional – Stainless Steel “lever handle” E B C A GB-15 & GB-16 SERIES GAS APPLIANCE BALL VALVES These gas appliance ball valves are designed for natural gas, manufactured and mixed gas, liquefied petroleum gases and LP gas-air mixture applications. They comply with the latest editions of these published standards: DESCRIPTION • UL Guide MHKZ • UL Guide YRPV • UL Guide YSDT • ANSI Z21.15,CGA9.1 • ASME B16.44 • UL Guide YRBX Model Number UNIBODY SERIES GB-15 GB-15 GB-15 GB-16 GB-16 GB-15 Part Number 51GF201 51GF301 51GF401 51GG201 51GG301 Size & End Connection (in.) 3/8 FNPT x 3/8 FNPT 1/2 FNPT x 1/2 FNPT 3/4 FNPT x 3/4 FNPT 1/2 FNPT x 3/8 Flare 1/2 FNPT x 1/2 Flare GB-16 Customer Service 1-704-841-6000 21 Ball Valves Gas/Fuel Shut-Off Valves GB-50 & GB-50A SERIES CSA GAS SHUT-OFF BALL VALVES Designed for indoor “main burner” applications, with cast-in single or dual pilot tap for faster, simpler installation. Fully complies with ASME B16.44, ANSI Z21.15, CGA9.1, and CR91-002 standards. ASTM B584 bronze body, chrome-plated ball, brass stem, retainer and gland screws for corrosion resistance. DESCRIPTION • For natural gas, manufactured and mixed gas, liquefied petroleum gases and LP gas-air mixtures • Rated pressures of 1/2 and 5 psig GB-50 Number Single Tapped 50GB301 50GB401 50GB501 50GB601 50GB701 50GB801 50GB5A1 50GB6A1 50GB7A1 50GB8A1 GB-50A Dual Tapped -50GB401A 50GB501A 50GB601A 50GB701A 50GB801A 50GB5A1A 50GB6A1A 50GB7A1A 50GB8A1A • High capacity • Comes standard with a reversible plated steel lever handle. Options include a die-cast zinc “wing” handle and “tee” handle • Standard connection is FNPT x FNPT Dimensions(in.) Size (in.) Tapping A B C D E F G H 1/2 1/8 0.50 1.11 2.25 1.68 3.85 2.27 1.00 0.53 3/4 1/8 0.75 1.26 2.67 1.93 3.85 2.72 1.12 0.75 1 1/8 1.00 1.65 3.42 2.19 4.78 3.18 1.53 0.94 1-1/4 1/8 1.25 1.87 3.86 2.37 4.78 3.56 1.62 1.15 1-1/2 1/8 1.50 2.05 4.22 2.81 5.40 4.21 1.81 1.31 2 1/8 2.00 2.48 5.02 3.18 5.40 4.93 2.18 1.68 1 1/4 1.00 1.65 3.42 2.19 4.78 3.18 1.53 0.94 1-1/4 1/4 1.25 1.87 3.86 2.37 4.78 3.56 1.62 1.15 1-1/2 1/4 1.50 2.05 4.22 2.81 5.40 4.21 1.81 1.31 2 1/4 2.00 2.48 5.02 3.18 5.40 4.93 2.18 1.68 *Note: Capacities based on 1000 Btu/cubic feet gas at 0.64 specific gravity, at a P.D. of 1'' W.C. G I E D B C F H G 22 Customer Service 1-704-841-6000 I 2.24 3.06 3.24 3.62 4.36 3.06 3.24 3.62 4.36 Capacity BTU/hr. 693000 1258000 3144000 6441000 7745000 14741000 3144000 6441000 7745000 14741000 Ball Valves Gas/Fuel Shut-Off Valves 80-100-01 UL-LISTED GAS SHUT-OFF VALVE UL-listed and designed as safe shut-off valve for LP gas, natural gas, flammable liquids and heated oil. Optional unplated ball model meets code requirements. Features easy quarter-turn ON/OFF, a large port to reduce pressure drop and NPT connections. DESCRIPTION • RPTFE seats and seals Model Number 80-101-01 80-102-01 80-103-01 80-104-01 80-105-01 80-106-01 80-107-01 80-108-01 80-109-01 80-100-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50 2.50 Dimensions (in.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.81 1.50 3.00 2.12 1.68 3.37 2.25 2.00 4.00 2.62 2.18 4.37 2.87 2.34 4.68 3.06 3.25 6.50 4.12 3.37 6.75 4.12 E 3.87 3.87 3.87 4.87 4.87 5.50 5.50 5.50 8.00 8.00 90-100-01 UL-LISTED UNI-BODY THREADED BALL VALVE A compact valve that’s UL listed at 300 psig for fuel, inert gases and flammable liquids. Features chromium-plated ball, RPTFE seats and seals. DESCRIPTION • Optional tee handle • Reduced port • Blowout-proof stem design • One-piece bronze body Model Number 90-103-01 90-104-01 90-105-01 90-106-01 90-107-01 90-108-01 Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.50 0.62 0.81 1.00 1.25 Customer Service 1-704-841-6000 Dimensions (in.) C D B 1.14 2.15 1.68 1.36 2.61 1.75 1.50 2.90 2.00 3.50 2.18 1.81 2.06 3.79 2.62 2.43 4.42 2.81 E 3.87 3.87 4.87 4.87 5.50 5.50 23 Ball Valves Padlocking Valves 75-100-41 PADLOCKING BALL VALVE WITH AUTOMATIC DRAIN Meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked OPEN or CLOSED with same hardware. Built with RPTFE seats and stuffing box ring, a blowout-proof stem design, adjustable packing gland and chromium-plated ball. (Also available without drain option. Specify suffix -01). DESCRIPTION • Threaded end connections • Rated to 125 psig – air or water • Temperature range: +50°F to 200°F Model Number 75-101-41 75-102-41 75-103-41 75-104-41 75-105-41 75-106-41 75-107-41 75-108-41 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.43 0.50 0.50 0.87 0.87 1.00 1.25 1.50 Dimensions (in.) B C D 1.12 2.25 1.81 1.12 2.25 1.81 1.12 2.25 1.81 1.68 3.37 2.25 1.68 3.37 2.25 2.00 4.00 2.62 2.16 4.37 2.87 2.34 4.68 3.06 E 3.00 3.00 3.00 3.87 3.87 5.50 5.50 5.50 Three-Piece Full-Port Valves 82-100-01 FULL-PORT THREE-PIECE VALVE This in-line repairable threaded ball valve offers RPTFE seats and seals and a 600 WOG rating. SAE Grade 8 body bolts standard. DESCRIPTION • Rated 150 psig saturated steam • Adjustable packing nut Model Number 82-101-01 82-102-01 82-103-01 82-104-01 82-105-01 82-106-01 82-107-01 82-108-01 82-109-01 82-140-01 82-14A-01 24 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 A 0.43 0.50 0.62 0.81 1.00 1.25 1.50 2.00 2.50 3.00 4.00 Customer Service 1-704-841-6000 Dimensions (in.) B C D 1.28 2.56 1.81 1.81 2.56 1.28 1.40 2.81 1.93 1.71 3.43 2.18 1.93 3.87 2.62 2.37 4.75 2.87 2.62 5.25 3.37 3.01 6.03 3.68 3.62 7.25 5.14 4.00 8.00 6.77 8.26 11.00 5.50 E 3.87 3.87 4.87 4.87 5.50 5.50 8.00 8.00 9.75 18.00 18.00 Ball Valves Three-Piece Full-Port Valves FULL-PORT THREE-PIECE VALVE WITH LOCKING PLATE 82-100-19 Threaded valve features a three-piece design that makes in-line repairs easy. Meets OSHA lock-out standards. It’s equipped with RPTFE seats. Two bolts are steel, two are stainless steel. (Option -19 not available on 2-1/2" size). DESCRIPTION • Rated 150 psig for saturated steam • 600 psig WOG cold, non-shock 82-140-57 FULL-PORT THREE-PIECE VALVE WITH 316 STAINLESS STEEL BALL/STEM Cleaned for gaseous oxygen, valve is equipped with NPT connections and features RPTFE seats and seals, blowout-proof stem design and adjustable packing gland. DESCRIPTION • Rated 600 psig cold, non-shock • 150 psig for saturated steam FULL-PORT THREE-PIECE VALVE WITH NPT X SOLDER ENDS 82-100-63 Built to make in-line repairs fast and simple, this valve features RPTFE seats and seals and a 600 WOG rating. It’s equipped with SAE Grade 8 body bolts. DESCRIPTION • Full-port flow advantages • Adjustable packing gland 82-200-01 FULL-PORT THREE-PIECE SOLDER END VALVE Valve features full-port and is easily repaired in-line. Designed for soft soldering or brazed installation. Includes RPTFE seats and seals. DESCRIPTION • Chromium-plated ball • Equipped with SAE Grade 8 body bolts Model Number 82-202-01 82-203-01 82-204-01 82-205-01 82-206-01 82-207-01 82-208-01 82-209-01 82-240-01 82-24A-01 Size* (in.) 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 A 0.50 0.62 0.81 1.00 1.25 1.50 2.00 2.50 3.00 4.00 B 1.28 1.40 1.71 1.93 2.37 2.60 3.01 3.62 4.00 5.50 Customer Service 1-704-841-6000 Dimensions (in.) C D E 2.56 1.81 3.87 2.81 1.93 4.87 3.43 2.18 4.87 3.87 2.62 5.50 4.75 2.87 5.50 5.25 3.37 8.00 3.68 8.00 6.03 7.25 5.14 9.38 8.00 6.77 18.00 11.00 8.26 18.00 F 0.50 0.63 0.88 1.13 1.38 1.63 2.13 2.63 3.13 4.13 G 0.37 0.50 0.75 0.90 0.96 1.09 1.34 1.47 1.66 2.16 25 Ball Valves “Safe” Solder Valves (Three-Piece) 82-200/82-240 THREE-PIECE FULL-PORT VALVE WITH BRAZED TUBING Also available: with nominal 6" type K tubing brazed into the solder end cup – cleaned for oxygen service (option suffix -57). This valve is useful in pharmaceutical, medical gas and pneumatic applications where valves should not be disassembled prior to soldering or brazing. * Nominal Tubing O.D. Standard Model Model Numbers Numbers 316 Ball & Stem 82-203-B8 82-243-A8 82-204-A8 82-244-B3 82-205-B7 82-245-B1 82-206-B7 82-246-B0 82-207-B2 82-247-B2 82-208-B7 82-248-B2 Oxygen Cleaned Model Model Numbers Numbers 316 Ball & Stem 82-203-A1 82-243-A7 82-204-A2 82-244-B2 82-205-A1 82-245-B0 82-206-A1 82-246-A9 82-207-A1 82-247-B0 82-208-A1 82-248-B1 Dimensions (in.) Size (in.) A*(in.) B C 1/2 5/8 0.62 0.05 3/4 0.87 0.81 0.07 1 1.12 1.00 0.07 1-1/4 1.37 1.25 0.07 1-1/2 1.62 1.50 0.07 2 2.12 2.00 0.08 D 13.81 13.93 14.04 14.81 15.07 15.23 E 2.00 2.18 2.62 2.87 3.37 3.70 F 4.87 4.87 5.50 5.50 8.00 8.00 General Purpose Uni-body Valves 9A-100-01 HEAVY PATTERN UNI-BODY THREADED BALL VALVE One-piece bronze valve eliminates leak paths. Features static grounding devices and adjustable packing gland. Lever handle standard. DESCRIPTION • Rated 600 psig WOG • Blowout-proof stem design Model Number 9A-101-01 9A-102-01 9A-103-01 9A-104-01 9A-105-01 9A-106-01 9A-107-01 9A-108-01 26 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.37 0.37 0.50 0.62 0.81 1.00 1.25 Customer Service 1-704-841-6000 Dimensions (in.) B C D 1.34 2.59 1.68 1.34 2.59 1.68 1.34 2.59 1.81 1.44 2.84 1.84 1.72 3.28 2.00 1.94 3.84 2.18 2.06 4.00 2.68 2.87 4.56 2.29 E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50 G 6.00 6.00 6.00 6.00 6.00 6.00 Ball Valves General Purpose Uni-body Valves THREADED UNI-BODY BALL VALVE 91-100-01 A compact valve featuring a chromium-plated ball, adjustable packing gland, blowout-proof stem design and RPTFE seats and seals. Lever handle standard, tee handle optional. DESCRIPTION • 150 psig saturated steam • 400 psig WOG cold non-shock Model Number 91-101-01 91-102-01 91-103-01 91-104-01 91-105-01 91-106-01 91-107-01 91-108-01 Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Dimensions (in.) B C D 1.14 2.15 1.68 1.14 2.15 1.68 1.14 2.15 1.68 1.36 2.61 1.75 1.50 2.90 2.00 1.81 3.50 2.18 2.06 3.79 2.62 2.43 4.42 2.81 A 0.37 0.37 0.37 0.50 0.62 0.81 1.00 1.25 E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50 Specialty Valves DUAL WYE AUTO DRAIN BALL VALVE Dual action modular valve, ideal for compressor applications where safety exhaust may be needed for two air lines at once. 3-WAY, 4-SEATED BALL VALVE WITH FLANGED PUMP CONNECTIONS This special valve can be used in hydronic geothermal or other HVAC applications where diversion of flow is required, along with positive shut-off. Designed to connect directly to circulator pump flange connections. CAP AND CHAIN VALVE WITH 3/4 INCH HOSE CONNECTION HEAVY BRASS CAP AND REVERSE HANDLE 78-100-01 Ideally suited for direct connections to hoses, valve features a securely attached cover with chain which prevents damage to hose threads. -200 model designed for soft soldering into lines without disassembly. Features chromium-plated ball, blowout-proof stem design and RPTFE seats and stuffing box ring. DESCRIPTION • Adjustable packing gland • New pressure-containing version available Model Number 78-103-01 78-104-01 78-165-01 78-203-01 78-204-01 78-195-01 Size (in.) 1/2 NPT x 3/4 Hose 3/4 NPT x 3/4 Hose 1 NPT x 3/4 Hose 1/2 Solder x 3/4 Hose 3/4 Solder x 3/4 Hose 1 Solder x 3/4 Hose • New reverse handle standard for easier installation A 0.50 0.68 0.87 0.50 0.68 0.87 Customer Service 1-704-841-6000 Dimensions (in.) B C D E 1.68 2.81 2.97 3.87 1.96 3.50 3.67 4.87 2.24 3.92 4.16 5.28 1.68 3.14 3.28 3.89 1.96 3.94 4.09 4.89 2.24 4.49 4.73 5.28 F 1.75 2.12 2.43 1.75 2.12 2.43 27 Ball Valves Cast Iron Ball Valves “The Gate Valve Alternative” IBV-125 SERIES APOLLO® INTERNATIONAL CAST IRON FULL-PORT CLASS 125 FLANGED BALL VALVES The Conbraco IBV-125 Series cast iron ball valve meets MSS SP-72, ANSI B16.10 and federal WW-V-35 performance standards. They can be used to replace any IBBM gate valve or plug valve. With their full-port design, these valves assure an unobstructed, turbulence-free flow that gate and butterfly valves can’t match. Low profile handle for easy installation in tight areas. Sizes from 2" to 10". Rated 125 WSP, 200 WOG, with a maximum operating temperature of 350˚F. DESCRIPTION • Gear operator standard 8" and 10" • Full-port design offers superior flow rate • No bronze seat rings, disc rings or stems to wear out • Quarter-turn offers instant, positive shut-off with zero leakage • Stainless steel ball resists corrosion • Handle indicates valve operation status IBVE-125 SERIES • Large actuator mounting pad standard • Optional locking handles available • Blowout-proof stainless steel stem • PTFE seats and packing, not Nitrile or EPDM • Opens and closes easily, without cheater bar • For more technical information, request #PHBRIRBV brochure APOLLO INTERNATIONAL EPOXY COATED DUCTILE IRON FULL-PORT CLASS 125 FLANGED BALL VALVE IBVE-125 Series valves have all the design and construction features of the IBV-125 plus an FDA-approved, heat-fused epoxy coating making them ideal for corrosive water service as well as food contact applications. Maximum operating temperature: 140˚F. C • For additional technical information, request #PHBRIRBV brochure A B Dimensions (in.) IBV Model Number 6P-208-01 6P-209-01 6P-200-01 6P-20A-01 6P-20C-01 6P-20E-01 6P-20G-01 IBVE Model Number 6Q-208-01 6Q-209-01 6Q-200-01 6Q-20A-01 6Q-20C-01 6Q-20E-01 - Size (in.) 2 2-1/2 3 4 6 8* 10* A 7.00 7.50 8.00 9.00 10.50 11.50 13.00 * with manual gear operator 28 Customer Service 1-704-841-6000 B 6.00 7.00 7.50 9.00 11.00 13.50 16.00 C 9.00 16.00 16.00 19.70 26.00 - D 3.00 3.70 4.00 4.80 7.20 9.24 11.81 Wt./100 (lbs.) 22.0 34.0 38.0 58.0 118.0 345.0 440.0 Ball Valves International Economy Valves APOLLO® INTERNATIONAL FULL-PORT BRASS BALL VALVES 64 SERIES Economy full-port forged ball valve with maximum flow; ideal choice for all plumbing applications. Lever handle is standard on all sizes. DESCRIPTION • Sizes from 1/4" to 4" • Threaded (-100) and solder end (-200) connections • Pressure rated to 600 psig WOG; 150 psig steam • Temperatures to 366˚F (185˚C) • Blowout-proof stem • Chrome-plated brass ball • Secondary O-ring stem seal • PTFE seats, thrust bearing and stem packing 64-100 Model Number Size (in.) 1/4 NPT 64-101-01 64-102-01 3/8 NPT 64-103-01 1/2 NPT 64-104-01 3/4 NPT 64-105-01 1 NPT 64-106-01 1-1/4 NPT 64-107-01 1-1/2 NPT 64-108-01 2 NPT 64-109-01 2-1/2 NPT 64-100-01 3 NPT 64-10A-01 4 NPT A 0.39 0.39 0.59 0.78 0.98 1.25 1.57 1.96 2.56 3.15 3.94 Dimensions (in.) B 2.02 2.02 2.44 2.71 3.07 3.42 3.89 4.33 5.59 6.45 7.60 C 1.75 1.75 1.88 2.28 2.44 3.07 3.34 3.79 5.02 5.45 6.34 D 3.85 3.85 3.85 4.80 4.80 6.02 6.02 6.37 8.07 8.07 10.23 6 7 19 34 50 104 268 309 629 1018 1622 64-200 Model Number 64-203-01 64-204-01 64-205-01 64-206-01 64-207-01 64-208-01 64-209-01 64-200-01 64-20A-01 A 0.59 0.78 0.98 1.25 1.57 1.96 2.56 3.15 4.13 Dimensions (in.) B 2.53 2.99 3.58 4.09 4.56 5.43 6.93 8.09 10.25 C 1.88 2.28 2.44 3.07 3.34 3.79 5.02 5.45 6.34 D 3.85 4.80 4.80 6.02 6.02 6.37 8.07 8.07 10.23 Cv" 19 34 50 104 268 309 629 1018 1622 Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 Optional Kits Valve Size (in.) 1/4, 3/8 and 1/2 3/4 and 1 1-1/4 and 1-1/2 2 2-1/2 and 3 4 Stem Extensions 78-1501-01 78-1502-01 78-1503-01 78-1504-01 78-1505-01 - Balancing Stops 78-1506-01 78-1507-01 78-1508-01 78-1509-01 78-1510-01 - Locking Handles 78-1659-01 78-1660-01 78-1661-01 78-1662-01 - Cv Lever Handles 78-1646-01* 78-1647-01 78-1648-01 78-1649-01 78-1650-01 78-1651-01 Note: Specify -07 suffix for “T” handle, ie. 64-105-07. Available with threaded models only in 1/4"-1" sizes. * Lever handle available on 1/2" - 4". APOLLO INTERNATIONAL FULL-PORT BRASS BALL VALVE WITH STOP & WASTE Threaded 95A-303-01 95A-304-01 95A-305-01 Sweat 95A-403-01 95A-404-01 95A-405-01 Customer Service 1-704-841-6000 95A SERIES Size (in.) 1/2 3/4 1 29 Ball Valves Numbering System Numbering System XX-XXX-XX SERIES 32 50 51 64 70 71 77 78 79 7B 7K 80 81 82 90 91 94A 95 95A 9A Bronze Ball Valve, Regular-Port Bronze Gas Valve, AGA & UL Listed Bronze Gas Valve, AGA Brass Ball Valve, Full-Port, International Bronze Bronze with Pads Bronze Full-Port Specialty Valves Refrigerant Valves Bronze, Full-Port, Hydro Bronze, with Drain Bronze, UL Listed Bronze, UL Listed, Plain Ball Bronze Three-Piece Full-Port Bronze, Unibody, UL Listed - Saturn® Bronze, Unibody - Saturn® Bronze, Full-Port, UL Listed, International Bronze, Stop & Drain Brass Ball Valve, Full-Port, International Bronze, Unibody, Heavy Pattern - Saturn® *BODY SIZE WHEN ENDS ARE MIXED. NOTE: NOT ALL VARIATIONS AND FEATURES ARE AVAILABLE ON SAME VALVE. CONSULT CONBRACO REPRESENTATIVE. ALL MANUFACTURING FACILITIES REGISTERED TO ISO 9001:2000 STANDARDS. CONFIGURATION Apollo & Saturn Valves: 1 2 3 4 5 6 7 8 9 FNPT Solder Union End NPT Union End Solder Spring Return 3-Way NPT Full-Port Refrigeration Valves Male X FNPT 3-Way Solder Apollo Three-Piece Valves 1 2 FNPT Solder SIZE* 1 2 3 4 5 6 7 8 9 0 A 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" VARIATIONS 1 2 3 4 5 7 8 9 One Size Larger Male Retainer Adjustable Stop Lever Ni-Cu Ball & Stem Stainless Steel Ball & Stem Original Balancing Stop One Size Smaller Female Retainer (Not Assigned) Pinned Retainer Numbering System Options -01 -02 -03 -04 -05 -07 -08 -09 -10 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -23 -24 -27 -30 -31 -32 -35 30 Standard Stem Grounded 1-1/4" Carbon Steel Stem extension 2-1/4" Carbon Steel Stem extension Plain Ball Steel Tee Handle 90˚ Reversed Stem Stainless Steel Lever Stainless Steel Lever & Nut Stamped “157 SWP” & Bagged Stamped “157 SWP” Side Vented Ball (uni-directional) Wheel Handle, Steel Chain Lever - Vertical Rough Chrome Plated - Bronze Valves Plain Yellow Grip Lock Plate Slot Vented Ball (bi-directional) - Bronze Valves UHMWPE Trim (non-PTFE) Tank Flange (2" Three-Piece valves only) Graphite Packing Stainless Steel Latch-Lock Lever & Nut Cam-Lock and Grounded 7B Series w/Boss NOT Drilled/Tapped Stainless Steel Tee Handle & Nut VTFE Trim -36 -39 -40 -41 -45 -46 -47 -48 -49 -50 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -68 -72 -97 -98 -BC Stainless Steel Hi-Rise Round Handle, Stainless Steel Nut SS Hi-rise Locking Wheel Handle, SS Nut Cyl-Loc and Grounded Automatic Drain Less Lever and Nut Latch-Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" Carbon Steel Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem Grounded Ball & Stem, Assembled Dry Body Center Section NPT x Solder 250# Steam Trim Multifill Seats & Graphite Packing 4" Stem Extension (3" & 4" 3-pc 82 Series) RTFE Packing Grnd. Whl. Handle, Pinned or Tack Welded Grnd. Whl. Pinned or Tack Welded & 1-1/4 Stem Ext. Ball Check Customer Service 1-704-841-6000 Butterfly Valves Butterfly Valves 141/143 SERIES GENERAL PURPOSE/ECONOMY BUTTERFLY VALVES Apollo® 141/143 Series valves are ideal for use in industrial and HVAC/mechanical markets. 141 Series is a wafer style valve (2" - 24"); 143 Series is a companion lug (2" - 24"). Both are rated at 200 PSI (2''-12'') and 150 PSI (14''-24'') bubble-tight shut-off between flanges. These valves are designed for reliable performance in hot and cold water applications, treated or untreated, on-off or throttling, control isolation, flow balance or diversion tasks. Valves are 100 percent factory tested in both operational directions. They feature an extended neck length to provide a minimum 2" clearance between valve top plate and pipe flange. 141/143 Series meet MSS SP-67 and API 609 specifications. All 143 series valves are equipped with retainer screws for dead-end service at full rated pressure. Available with three disc materials: Nickel-Plated Ductile Iron, Aluminum Bronze and Stainless Steel. Available with two seat materials: EPDM and Buna-N. Size (in.) 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24 Size (in.) 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24 WEIGHTS Size (in.) 2 2-1/2 3 4 5 6 8 A 3.25 3.75 4.00 4.87 5.37 5.87 7.12 8.25 9.75 11.00 12.00 14.37 14.62 18.00 B 6.27 6.87 7.12 7.87 8.37 8.87 10.25 11.50 13.25 14.50 15.75 16.62 18.87 22.12 C 1.25 1.25 1.25 1.25 1.25 1.25 1.75 1.87 1.87 1.87 2.00 2.00 2.50 2.75 Dimensions (in.) D E F 1.75 0.394 0.496 1.87 0.394 0.496 1.87 0.394 0.496 2.12 0.472 0.621 2.25 0.551 0.745 2.25 0.551 0.745 2.50 0.669 0.870 2.75 0.866 1.120 3.12 0.945 1.244 3.12 0.945 1.244 3.50 1.313 4.25 1.500 5.25 1.625 6.12 2.000 H2 ------4.015 4.015 ------- Dimension (in.) I J 3.54 4.00 3.54 4.75 3.54 5.12 3.54 6.75 3.54 7.75 3.54 8.62 5.91 10.56 5.91 13.06 5.91 16.00 5.91 17.12 5.91 20.00 8.27 21.37 8.27 23.31 8.27 27.87 141 Model 6 8 9 11 15 18 32 143 Model 9 10 11 18 22 26 43 H 2.756 2.756 2.756 2.756 2.756 2.756 4.921 4.921 4.921 4.921 4.921 6.496 6.496 6.496 Customer Service 1-704-841-6000 L (141) 0.687 0.687 0.687 0.687 0.812 0.8125 0.8125 0.9375 0.9375 1.0630 1.0630 1.2500 1.2500 1.3750 WEIGHTS Size (in.) 10 12 14 16 18 20 24 G 0.375 0.375 0.375 0.375 0.375 0.375 0.563 0.563 0.563 0.563 0.563 0.813 0.813 0.813 G2 ------0.438 0.438 ------- Key ----------0.313 SQ 0.375 SQ 0.375 SQ 0.500 SQ Tapped Lug Data (143) K #Holes Tap UNC. 4.75 4 0.625-11 5.50 4 0.625-11 6.00 4 0.625-11 7.50 8 0.625-11 8.50 8 0.750-10 9.50 8 0.750-10 11.75 8 0.750-10 14.25 12 0.875-9 17.00 12 0.875-9 18.75 12 1.000-8 21.25 16 1.000-8 22.75 16 1.125-7 25.00 20 1.125-7 29.50 20 1.250-7 141 Model 47 70 90 142 176 251 405 Across Parallel Flats Across Parallel Flats 143 Model 66 102 148 206 277 410 592 31 Automation Automation Products ACTUATORS AND MANUAL OPERATORS APOLLO® COMPACTORQUE™ PNEUMATIC ACTUATORS OVERVIEW Apollo® CompacTorque™ actuators are the most advanced rack and pinion actuators on the market today. From corrosion protection to versatility in application, these actuators offer you the ultimate in design and selection.Their outstanding design starts with hard anodized aluminum construction, in your choice of polyester powder coatings, 316L stainless steel pigmented polyester electrostatic coating or electroless nickel coating. This range of materials assures you the maximum in corrosion protection at an affordable cost. Our unique Universal Shaft Adapter (USA) makes direct mounting to your favorite butterfly valve easier than ever. The precision replaceable inserts feature variable internal geometry to meet any custom requirements. The standard insert material is high-strength FLNC-4408. Optional stainless steel inserts are available. CompacTorque™ actuators are available in spring return or double-acting units which convert easily in the field to a spring return design by simply adding the correct number of pre-loaded springs to the standard housing. Specially designed spring cartridges make our spring return actuators inherently safe. Other standard features include internal and external travel stop adjustments, high temperature, low coefficient of friction body bearings to absorb the side thrust of the pistons, internal piston guides and high temperature, low friction piston bearings. The actuators’ internal porting reduces the cost of external tubing which can be easily damaged. All top mounting dimensions for accessory mounting and pneumatic supply ports conform to the latest NAMUR specifications. Actuators can be direct mounted to 1-1/2" to 24" Apollo valves. The standard spring cartridge system is designed to operate on 40, 60, 80, 100 and 120 PSI service. DESCRIPTION • External end of travel adjustments integral with the end caps • Mechanical visual position indicator and the pinion is designed to allow manual override by simply removing the position indicator • One piece output pinion manufactured of high strength steel and electroless nickel coated for corrosion protection • NAMUR slotted connection • Replaceable splined adapter to accommodate custom shaft connections 3T X - X 0 - Std. (Protection A) X X Size Option • Pistons and pinion that have a Nylon 4-6 bearing pad and rings, which extends the life of the actuator and reduces friction • Corrosion resistant polyester powder coated end caps • Hard anodized aluminum housing • All fasteners are high strength stainless steel • Permanently lubricated nitrile seals • Self-contained spring cartridges, heat treated and polyester powder coated for corrosion protection, that ensure safe disassembly - X Spring Set X - Less One Spring Imbalance X Rev. Level 0 1 0 - Nitrile (Std.) A - Standard 0 2 2 0˚F to +250˚F B - Without 3 3 3 - Spring Kit 3 1 - Viton Universal 4 S - Spring 4 - Indicator Kit 4 4 32˚F to +350˚F Shaft 5 Return 5 - Stop Kit 5 5 2 - Low Temp. Adapter* 6 6 6 - Polyester Powder 6 Nitrile M - Metric* K - Kit Coated (Protection B)*** 65 -50˚F to +250˚F 7 - Stainless Steel 7 3 - Neoprene Epoxy Coated 8 (Protection D) 9 8 - Stainless Steel Epoxy A Coated 316 SS Pinion (Protection E) G - Red Caps * Select one USA (Universal Shaft Adapter) from selection chart (Protection A) ** Select one USA, specify bolt pattern on bottom of Actuator H - Blue End Caps *** Specify if Polyester coating is Yellow, Red, Blue or Black (Protection A) J - Black End Caps (Protection A) D - Double 1 - ENC(Protection C) Acting 2 - Seal Kit 32 Customer Service 1-704-841-6000 Automation Automation Products APOLLO® AE SERIES ELECTRIC ACTUATORS AE SERIES Ruggedly built and designed for easy installation, new Apollo® AE Series electric actuators deliver the most standard features and performance in their class – for a surprisingly low price. Five output torques, one housing 200, 400, 600, 800 and 1,000 inch-pounds. DESCRIPTION • Long Service Life • Newly developed anodized die cast aluminum housing • Fiberglass reinforced nylon cover with UV stabilizers resists corrosion • Nitrile gasket and seals cover all penetration points in housing and cover • Precision cut and heat treated alloy spur gears • Permanently lubricated enclosed gear train • Stainless steel push-and-turn manual override shaft, position indicator shaft and female output • ISO 5211 F07 drive output reduces inventory of mounting kits AE • 115 AC, 220 AC and 24 AC -- all AC models feature a 25% duty cycle below 100˚F • 12 and 24 DC -- all DC voltage models provide 100% duty cycle • Operates from -40˚F (when equipped with heater and thermostat) to 150˚F • Actuators can be ordered with one, two or three additional limit switches • For low temperatures: actuators can be equipped with a thermostatically controlled heater element • Motor brake is necessary when mounting actuator to a butterfly valve XXX X XXX Output Torque (lbs. in.) Voltage Options 1 - 115 VAC 2 - 24 VAC 3 - 220 VAC 4 - 12 VDC 5 - 24 VDC 0 - None B - Two extra switches and cams C - Three extra switches and cams D - Heater and thermometer F - Motor brake (for butterfly valve) 115 VAC & 24 VAC only 200 400 600 800 1000 Customer Service 1-704-841-6000 33 Automation Accessory Products VALVE POSITION MONITORS Here’s the ultimate in valve monitoring: Westlock and Stonel position monitors feature a high visibility, color-coded indicator to display valve position. All Westlock and Stonel monitors are designed to correspond to the latest NAMUR standard for actuator/position monitoring units. Plated steel or stainless steel mounting kits are available to provide a pre-engineered mounting solution for maximizing position monitor performance and direct mounting to actuators. Other brands also available such as Moniteur, pictured here. See our Actuator Catalog for details. SOLENOIDS Apollo® CompacTorque™ actuators can be supplied with solenoids manufactured by AVC (Automatic Valve Company). Our 3/4 way, field convertible, direct mount (NAMUR pattern) solenoid valves feature a variety of interchangeable integrated molded coils. They’re compatible with both spring return and double acting actuators. POSITIONERS Apollo valve positioners are excellent tools for increasing the gain of your valve package, often reducing your actuator size due to your increased ability to accurately control higher air deliveries, and the flexibility to add options and accessories to complete your control package’s performance. Their simple design makes PMV positioners (shown here) easy to understand, calibrate and repair. Rugged construction provides operation in a variety of tough applications. Compact size minimizes space requirements. A complete package means the user can select the right positioner for his application. A bright indicator makes it easy for operators to visually check the valve position. Spool valve design requires very little maintenance. The electro-pneumatic unit eliminates the need for an extra product and additional connections. PMV positioners are proven products recognized for providing years of reliable service. Other brands are also available from your Apollo distributor. Apollo offers both pneumatic and electro-pneumatic positioners as standard. Pneumatic positioners may be used on either double acting or spring return actuators. The anodized aluminum housing provides excellent product integrity and good corrosion resistance. Options include special coatings, stainless steel housings and a variety of accessory items which can help you meet your most demanding control applications. See our Actuator Catalog for complete details. 34 Customer Service 1-704-841-6000 Plumbing and Heating Pressure Relief Valves 16-200 SERIES PRESSURE RELIEF VALVES Pressure relief valves relieve excess pressure in cold water supply systems, storage tanks, well pumps. Also suitable for air, oil, and other non-hazardous liquids. DESCRIPTION B • Standard pressure settings from 50 to 175 psig • Cast bronze body, stainless steel springs • Silicone soft seat ensures seat tightness, extended service life Model Number 16-202 16-203 Size (in.) 1/2 M x 1/2 F 3/4 M x 1/2 F • All valves are 100% factory tested • Maximum recommended service temperature 120˚F A C Wt./100 (lbs.) 33.0 37.5 A 1.41 1.41 Dimensions (in.) B C 2.12 1.00 2.50 1.00 16-200 Note: When ordering, specify pressure by adding the two digit suffix after the product number, i.e.: 50 psig: -01; 75 psig: -02; 100 psig: -03; 125 psig: -04; 150 psig: -05; 175 psig: -06 16-501 SERIES BY-PASS RELIEF VALVES Adjustable relief valves protect equipment by providing low volume liquid relief or bypass control. Excess volume may be discharged back to the low pressure source. Ideal for agricultural sprayers and simple commercial or industrial pressurized systems. DESCRIPTION • Knurled locknut locks pressure adjustment • Viton stem seal, polypropylene body gasket • Maximum recommended service temperature 200˚F • Adjustable relief settings, in two ranges to 600 psi • Cast bronze body, stainless steel springs • Choice of Nitrile (Buna) or PTFE soft seals Model Number 16-501-01 16-501-02 16-501-25 16-501-60 Size (in.) 1/2 M x 1/2 F 1/2 M x 1/2 F 1/2 M x 1/2 F 1/2 M x 1/2 F Wt./100 (lbs.) 0.62 0.62 0.62 0.62 Relief Range 0 - 250 250 - 600 0 - 250 250 - 600 Seat Material Nitrile Nitrile PTFE PTFE 16-503 & 16-504 SERIES CALIBRATED PRESSURE RELIEF VALVES Calibrated pressure relief valve allows for in-line pressure adjustments without the need for a pressure gauge. Provides static overpressure protection for liquid filled systems such as well pumps, tanks, fire protection systems. DESCRIPTION • Choice of 1/2" or 3/4" inlet connection • Factory preset at 100 psi • Pressure range 50 to 175 psi, calibrated in 25 psi increments Model Number 16-503-01 16-504-01 Size (in.) 1/2 M x 1/2 F 3/4 M x 1/2 F Customer Service 1-704-841-6000 • Cast bronzed body, stainless steel springs • Silicone soft seat, EPDM cap seal • Maximum recommended service temperature 200˚F Wt./100 (lbs.) 37 37 A 1.31 1.31 Dimensions (in.) B C 3.44 1.00 3.44 1.00 35 Plumbing and Heating Temperature and Pressure Relief Valves 18C-400 WATER HEATER T&P RELIEF VALVES Automatic temperature and pressure relief valves feature unique non-metallic coating which protects the element against galvanic and electromechanical corrosion by isolating it from the heated water. This coating is electrostatically applied for uniform coverage, then thermobonded, resulting in optimum adhesion for extended service life. CSA design certified at all settings to ANSI Z21.22. ASME Section IV rated at 125 psig and 150 psig settings for 3/4" NPT only. DESCRIPTION • CRN #0G8547.5C and #0G0053.6C registered in all Canadian provinces and territories • ASME capacity certified for 3/4" NPT only • Meets HUD/FHA requirements • Cast bronze body, stainless steel spring • Rated 210°F maximum Model Number 18C-401 18C-401 18C-402 18C-402 18C-402 Size (in.) 1/2 M x 1/2 F 1/2 M x 1/2 F 3/4 M x 3/4 F 3/4 M x 3/4 F 3/4 M x 3/4 F SUFFIX KEY Pressure psig 125 150 175 Element Length (in.) 1.44 3.00 1.44 3.00 8.00 1.44" -27 -28 - Wt./100 (lbs.) 64.0 64.0 64.4 64.4 64.4 Coated Element Length 3" -29 -30 -24 CSA Capacity rating BTU/HR. 15,000 15,000 80,000 105,000 105,000 8" -36 -37 - *Suffixes -24, -36 and -37 not available with model 18C-401. 18C-402X SERIES EXTENDED SHANK WATER HEATER T&P RELIEF VALVES Relief valves with an extended body length (2") for protection of water heaters with extra insulation. Unique non-metallic coating protects thermal element against galvanic and electromechanical corrosion. CSA design certified at all settings to ANSI Z21.22. ASME Section IV rated at 125 psig and 150 psig settings. DESCRIPTION • Meets HUD/FHA requirements • Cast bronze body, stainless steel spring • Rated to 210°F maximum • ASME capacity certified Model Number 18C-402X-39 18C-402X-38 36 Element Size (in.) Length (in.) 3/4 M x 3/4 F 3 3/4 M x 3/4 F 3 Customer Service 1-704-841-6000 • CRN #0G8547.5C and #0G0053.6C registered in all Canadian provinces and territories Wt./100 (lbs.) 75 75 Pressure psig 125 150 CSA Capacity Rating BTU/HR. 105,000 105,000 Plumbing and Heating Temperature and Pressure Relief Valves CORROSION RESISTANT COMMERCIAL T&P VALVES 18-500 SERIES Diaphragm type high capacity CSA design certified; ASME Section IV certified to 150 psig; ANSI Z21.22 certified to 150 psig. Corrosion resistant with all bronze body and screw-in cage. Eliminates rusting steel screws. Stainless steel springs and thermostats. DESCRIPTION • 3'' element is CSA capacity certified at 185,000 BTU/HR. • CRN #0G8547.5C registered in all Canadian provinces and territories • Available in set pressures of 75, 100, 125 and 150 psig • The 3/4'' valve can be supplied with 3'', 5'' or 8'' thermostats • Valves 1'' and larger available with 4" and 8" thermostats Model Number 18-511 18-512 18-521 18-522 18-531 18-532 18-541 18-542 18-551 18-552 A B Connection (in.) 3/4M x 3/4F 3/4F x 3/4F 1M x 1F 1F x 1F 1-1/4 M x 1-1/4 F 1-1/4 F x 1-1/4 F 1-1/2M x 1-1/2F 1-1/2F x 1-1/2F 2M x 2F 2F x 2F Dimensions (in.) A B C 4.67 1.85 1.38 4.67 1.85 1.38 6.63 2.32 1.93 6.63 2.32 1.93 6.63 2.32 1.93 6.63 2.32 1.93 9.69 3.34 2.50 9.69 3.34 2.50 9.69 3.34 2.63 9.69 3.34 2.63 Wt./100 (lbs.) 106.7 106.7 287.3 284.1 337.2 322.4 819.6 841.7 860.1 874.1 CSA Cap. Rating BTU/HR. 205,000 205,000 765,000 765,000 850,000 850,000 1,300,000 1,300,000 1,400,000 1,400,000 *ASME Rating BTU/HR. 1,601,000 1,601,000 4,200,000 4,200,000 4,586,000 4,586,000 7,763,000 7,763,000 9,262,000 9,262,000 C * National Board certified capacity at 150 psig per ASME Section IV-Heating Boilers; specify number, thermostat length and set pressure when ordering. EX: 18-511-3-150 ASME Section IV Low Pressure Steam Safety Valves LOW PRESSURE STEAM HEATING BOILER SAFETY VALVES 12-200 SERIES Use on medium and large commercial steam heating boilers. National Board capacity certified at 15 psig; PTFE coated O-Ring seat seal. DESCRIPTION • All bronze construction • 3/8" NPT side tapping for drain • Top guide, rust-proof steel spring • High capacity • Registered in all Canadian provinces and territories, CRN #0G8547.5C Model Number 12-205 12-206 12-208 Size(in.) Outlet Inlet NPT NPT 2 2 2-1/2 2-1/2 3 3 Max. Pressure Capacity* Wt./100 psig lbs./hr. (lbs.) 15 2500 514 15 3529 835 15 4100 1162 A B C Dimensions (in.) A B C 6.00 3.75 2.62 8.50 5.25 3.06 9.50 6.00 3.75 Note: When ordering specify pressure by adding the two digit key number after the product number as follows: 5 psig - 03; 6 psig - 04; 8 psig - 05; 10 psig - 06; 12 psig - 07; 15 psig - 08 *National Board Capacity Certified-(15 psi rating, 90% of actual capacity at 33% accumulation.) Customer Service 1-704-841-6000 37 Plumbing and Heating ASME Section IV Low Pressure Steam Safety Valves 13 Series LOW PRESSURE STEAM HEATING BOILER SAFETY VALVES National Board capacity-certified at 15 psig in accordance with ASME Section IV; optional rough or polished chrome finish; positive drainage of condensate from seat area. DESCRIPTION • No. 13-101 is top outlet discharge • Registered in all Canadian provinces and territories, CRN #0G8547.5C • Flat seat, PTFE faced disc for positive seal • Standard set pressure of 15 psig; capacities apply to valves set @ 15 psig A Model Number 13-101 13-211 13-202 13-213 13-214 13-511 13-512 C B 13-101 Size(in.) Inlet Outlet NPT NPT 3/4 M Top 3/4 M 3/4 F 1M 1F 1-1/4 M 1-1/2 F 1-1/2 M 2F 3/4 M 3/4 F 3/4 F 3/4 F Max. Pressure Capacity* psig lbs./Hr. 15 410 15 475 15 643 15 1200 15 1900 15 407 15 407 Wt./100 (lbs.) 64 107 110 218 320 62 59 Dimensions (in.) A B C 2.87 0.94 1.250 1.81 3.69 1.437 2.06 3.87 1.218 2.53 4.50 1.875 3.00 5.25 2.187 1.69 3.25 1.187 1.81 2.75 1.187 *National Board Capacity Certified at 15 psig (90% of actual capacity at 33% accumulation.) Use key to designate last two digits of model number. Last two digits indicate pressure and finish. SUFFIX KEY B Pressure psig 5 6 8 10 12 15 B A A C C Plain Brass -03 -04 -05 -06 -07 -08 Satin Chrome -35 -36 -37 -38 -39 -40 Polished Chrome -43 -44 -45 -46 -47 -48 13-511 13-200 14-200 SERIES HIGH CAPACITY LOW PRESSURE STEAM BOILER SAFETY VALVES National Board capacity-certified in accordance with ASME Section IV at 15 psig. For commercial and industrial boilers. Capacities up to 6843 lbs./hr. DESCRIPTION B A • Nozzle-type chrome-plated brass disc • Optional test gag available to allow hydrostatic testing. (Add “G” suffix to pressure code when ordering.) • PTFE coated O-ring for positive seal • One piece body, all bronze construction • Rust proof steel spring • Registered in all Canadian provinces and territories, CRN #0G8547.5C C Model Number 14-205 14-206 14-207 Size (in.) 2x2 2-1/2 x 2-1/2 3x3 *Capacity lbs./hr. 3150 4676 6843 Wt./Each (lbs.) 8.4 13.0 17.0 A 3.00 3.50 4.12 Dimensions (in.) B 7.12 8.25 9.37 C 3.12 3.50 3.87 *National Board Capacity Certified at 15 psig.(90% of actual capacity at 33% accumulation.) Note: When ordering specify pressure by adding the two digit key number after the product number as follows: 5 psig - 03; 6 psig - 04; 8 psig - 05; 10 psig - 06; 12 psig - 07; 15 psig - 08 38 Customer Service 1-704-841-6000 Plumbing and Heating ASME Section VIII Safety Valves ASME SECTION VIII STEAM SAFETY VALVES 10-322 & 10-512 Series National Board capacity-certified safety valves; brass body with optional satin or polished chrome finish. Protects against excess pressure from thermal expansion and steam caused by failure of BTU input controls. Ideally suited for O.E.M. applications such as steam cookers, autoclaves, sterilizers, coffee makers and similar equipment. DESCRIPTION • 10-322 in polished chrome only • CRN #0G8547.5C, registered in all Canadian provinces and territories • Stainless steel springs • Discharge capacities to 725 lbs./hr. • Pressure settings 15 to 60 psig Size(in.) Inlet Outlet NPT NPT 3/4 M 3/4 F 1/2 M 1/2 F Model Number 10-322 10-512 Key Pressure Number 15 20 25 30 35 40 45 50 55 60 Plain Brass 01 02 04 05 06 07 09 10 11 12 Pressure Range psig 20-60 15-60 Height (in.) 3.75 2.62 *Certified Capacities Satin Polished 10.322 10.512 Chrome Chrome lbs./hr. lbs./hr. J2 65 151 41 67 325 178 43 69 375 205 44 70 425 232 45 71 475 258 46 72 525 285 48 74 575 312 49 75 625 339 50 76 675 366 51 77 725 392 10-512 Wt./100 (lbs.) 128 58 10-322 Model 10-512 available with optional stainless steel trim. Use key to designate last two digits of model number. Last two digits indicate pressure and finish. Example: 10-322-67 = 20# pressure, polished chrome * ASME (UV) Rating – 90% of actual capacity at 10% accumulation. Capacity in lbs. of saturated steam per hour 14-400 & 14-500 SERIES LOW PRESSURE AIR RELIEF VALVES High volume air relief valves designed for non-ASME code low pressure air and gas service. Rugged bronze construction features elastomer soft seating and TFE coated discs for dependable operation. Standard test lever for model 14-400 and optional plain cap, weather resistant sealed body for model 14-500. Ideal for use with low pressure, high volume blowers and compressors, bulk hauling tanks, trailers, and rail cars, powdered solids/bulk handling and pneumatic conveying equipment. B A DESCRIPTION • Vibration resistant soft seat is standard • Stainless steel spring • One piece unified bronze body design Model Number 14-X05 14-X06 14-X07 • High flow “top-guided” design • Inlet sizes 2", 2 1/2" and 3" • Set pressures 4 to 22 psig @ 400˚F max Size (in./mm.) 2x2 50M x 50F 2-1/2 x 2-1/2 65M x 65F A 3 76 3-1/2 89 Dimensions(in./mm.) B 6-1/2 165 7-5/8 194 C 3-1/8 79 3-1/2 89 Wt./Ea (lbs./kg.) 8.4 3.81 12.5 5.7 3x3 80M x 80F 4-1/8 105 8-3/4 222 3-7/8 98 17.0 7.7 14- X Body/Cap Style and Services 4=Air Relief, with Test Lever 5=Air Relief, Plain Cap Customer Service 1-704-841-6000 XX - Inlet x Outlet Size 05=2" NPT 06=2 1/2" NPT 07=3" NPT 14-400 w/Lift Lever C B A 14-500 Plain Cap C XX Pressure Relief Set pressure in psig (2 Digits) 39 Plumbing and Heating Vacuum Relief Valve 14-600 SERIES VACUUM RELIEF VALVES High flow vacuum relief valves feature one piece cast bronze bodies, Teflon coated discs and elastomer soft seating provide accurate and dependable operation. Ideal for use with high volume vacuum systems, bulk hauling tanks and trailers, powdered solids/bulk handling and pneumatic conveying equipment. Connect vacuum source here DESCRIPTION • One piece unified bronze body design • High capacity “top-guided” design • TFE / chrome plated internals • Connection sizes 2", 2 1/2" and 3" • Relief settings 8" to 30" Hg @ 400˚F max B A • Weather resistant construction • Elastomer soft seat is vibration resistant • Stainless steel spring Model Number 14-605 C 14-600 14-606 14-607 Size (in./mm.) 2x2 50M x 50F 2-1/2 x 2-1/2 65M x 65F A 3 76 3-1/2 89 Dimensions(in./mm.) B 6-1/2 165 7-5/8 194 C 3-1/8 79 3-1/2 89 Wt./Ea (lbs./kg.) 8.4 3.81 11.8 5.4 3x3 80M x 80F 4-1/8 105 8-3/4 222 3-7/8 98 16.3 7.4 14-6 XX ASME Section I & VIII Safety Valves 19 SERIES - V XX Inlet x Outlet Size Pressure Relief 05 = 2 NPT 06 = 2 1/2" NPT 07 = 3" NPT Vacuum Relief Setting, HG “V” Prefix + Inches Mercury (“V” + 2 Digits) BRONZE SAFETY VALVES FOR STEAM, AIR & GAS SERVICE National Board capacity certified, high capacity, ideal for use with all types of boilers, pressure vessels, compressors and pressure piping systems. DESCRIPTION • • • • • Pressures: 15 through 300 psig steam, air, gas Max. temp. 406˚F, 422˚F with stainless steel trim 12 sizes, 1/2" thru 2-1/2" NPT Stainless steel spring Optional 316 stainless steel wetted trim (Specify 19L or 19S Series) • Available in metal and soft seat designs • Metal to metal seat lapped to optical flatness B A C 19- X - X Orifice Letter Trim Standard D M-Brass/Metal Seat E K-Brass/PFA “Soft” Seat F Optional G L-SS/PFA “Soft” Seat H S-SS/Metal Seat J 40 XInlet Size C-1/2" D-3/4" E-1" F-1-1/4" G-1-1/2" H-2" J-2-1/2" Customer Service 1-704-841-6000 • Less costly repairing, soft seat easily replaced • Double ring, full bore, high-capacity design • Tapped body drain facilitates piping of condensate away from equipment • Registered in all Canadian provinces and territories CRN #0G8547.5C • New! Wider wrenching hex for easier, faster installations. X- XXX - XX Service Pressure Setting A-Sect. I Steam In psig K- Sect. VIII Air L-Sect. VIII Steam N-Non-Code Air P-Non-Code Steam Specials A-Anti-Vibration X-Oxygen Clean Other Suffixes Factory Issued Plumbing and Heating ASME Section I & VIII Safety Valves BRONZE SAFETY VALVES FOR STEAM, AIR & GAS SERVICE (CONTINUED) Model Number 19KDC 19KDD 19KED 19KEE 19KFE 19KFF 19KGF 19KGG 19KHG 19KHH 19KJH 19KJJ Orifice Designation D D E E F F G G H H J J Size (in.) Inlet x Outlet 1/2 x 3/4 3/4 x 3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2 1-1/2 x 1-1/2 1-1/2 x 2 2x2 2 x 2-1/2 2-1/2 x 2-1/2 Wt./Ea. (lbs.) 1.6 1.6 2.0 2.2 4.1 4.3 7.4 7.6 11.5 11.6 19.9 20.8 A 2.21 2.21 2.50 2.64 2.95 2.95 3.38 3.38 3.63 3.63 4.06 4.50 Dimensions (in.) B 6.52 6.52 7.16 7.30 9.34 9.34 11.01 11.01 11.96 11.96 14.25 14.68 C 1.37 1.37 1.75 1.75 2.00 2.00 2.37 2.37 2.75 2.75 3.50 3.50 Set Pressure psig D 15 174 25 229 40 311 50 366 100 646 125 787 150 929 165 1,014 200 1,211 250 1,494 300* 1,777 Approx 5.7 1 psi increments E 310 408 555 653 1,152 1,404 1,656 1,807 2,160 2,664 3,168 10.1 F 484 637 866 1,019 1,798 2,191 2,585 2,821 3,371 4,158 4,945 15.7 Orifice G 794 1,045 1,421 1,672 2,950 3,595 4,240 4,628 5,531 6,822 8,112 25.8 H 1,240 1,631 2,217 2,608 4,602 5,609 6,616 7,220 8,630 10,644 12,658 40.3 J 2,035 2,677 3,641 4,283 7,557 9,210 10,864 11,856 14,170 17,477 20,784 66.1 Set Pressure psig D 15 179 25 234 40 322 50 382 100 684 125 835 150 985 165 1,076 1,287 200 250 1,590 1,892 300* Approx. 6.0 1 psi increments E 320 417 574 682 1,220 1,489 1,758 1,920 2,296 2,834 3,373 10.8 F 499 652 896 1,064 1,904 2,324 2,744 2,996 3,584 4,424 5,265 16.8 Orifice G 819 1,070 1,471 1,746 3,124 3,813 4,502 4,916 5,881 7,259 8,639 27.6 H 1,278 1,669 2,295 2,725 4,875 5,950 7,025 7,670 9,175 11,325 13,479 43.0 J 2,099 2,741 3,768 4,474 8,005 9,770 11,535 12,594 15,066 18,596 22,132 70.6 114 149 204 243 434 530 626 683 818 1,009 1201 3.8 178 232 319 379 678 828 977 1,067 1,276 1,575 1874 6.0 292 381 524 622 1,112 1,358 1,603 1,750 2,094 2,584 3075 9.8 455 594 817 970 1,736 2,118 2,501 2,731 3,267 4,032 4,798 15.3 747 976 1,342 1,593 2,849 3,478 4,106 4,484 5,364 6,621 7,878 25.1 15 25 40 50 100 125 150 165 200 250 300 Approx. 1 psi increments 64 83 115 136 244 297 351 383 459 566 673 2.2 Customer Service 1-704-841-6000 ASME Section I Steam Power Boiler - “V” steam lbs./hr. steam @ 3% accumulation *Specify Model 19S with stainless steel wetted trim for steam settings beyond 250 psig. ASME Section VIII Steam Unfired pressure Vessels “UV” steam lbs./hr. @ 10% accumulation *Specify Model 19S with stainless steel wetted trim for steam settings beyond 250 psig. ASME Section VIII Air Unfired pressure Vessels “UV” air SCFM @ 10% accumulation 41 Plumbing and Heating ASME Section I & VIII Safety Valves OEM STYLE BRONZE SAFETY VALVES FOR STEAM, AIR & NON-HAZARDOUS GAS 29 SERIES Conbraco 29 Series is ideally suited for OEM applications where compact size, dependable performance and maximum economy are required. These rugged safety valves feature a top guided design and patented Teflon® “soft-seat” for dramatically reduced seat leakage. Ideal for small to medium sized steam power boilers, sterilizers and distillers, air compressors and receivers, pressure vessels and pressure piping systems. Flow ratings are National Board certified. DESCRIPTION • New, more descriptive model numbering system • Stainless steel springs are standard • PFA Teflon® seat resists corrosive boiler chemicals • Pressure settings from 30 to 200 psig • Rust-proofed steel stem and spring washers A C B 29- XXX - Inlet x Outlet Size Bronze body 102 = 3/8" x 1" Brass Trim 202 = 1/2" x 1" ® Teflon soft seat 302 = 3/4" x 1" 303 = 3/4" x 1-1/4" 402 = 1" x 1-1/4" 501 = 1-1/4" x 1-1/4" Model Number 29-102 29-202 29-302 29-303 29-402 29-501 Size(in.) Inlet 3/8 1/2 3/4 3/4 1 1-1/4 Outlet 1 1 1 1-1/4 1-1/4 1-1/4 XX - - XX Set Pressure Service Set pressure, PSIG A=ASME Sec I Steam (range 30-200 psig) K=ASME Sec VIII Air L=ASME Sec VIII Steam Wt./Ea. (lbs.) 1.30 1.33 1.90 3.43 3.43 3.48 A 5.41 5.41 5.41 7.25 7.25 7.25 X Options S-Stainless Steel Wetted Trim (Models 29-202 and 29-303 only) Dimensions (in.) B 1.25 1.25 1.25 1.69 1.69 1.69 C 2.12 2.12 2.12 2.75 2.75 2.75 Set Pressure Number 50 75 100 125 150 200 Approx. 1 psi increments 29-102 29-202 29-302 238 331 423 516 608 794 3.7 29-303 29-402 29-501 479 664 851 1,036 1,223 1,596 7.4 ASME Section VIII Steam Unfired pressure vessels “UV” steam lbs./hr. @ 10% accumulation 50 75 100 125 150 200 Approx. 1 psi increments 251 350 448 547 646 844 3.9 504 704 902 1,102 1,299 1,697 8.0 ASME Section VIII Air Unfired pressure vessels “UV” air SCFM @ 10% accumulation 50 75 100 125 150 200 Approx. 1 psi increments 89 124 159 194 230 300 1.4 180 250 321 391 463 604 2.8 ASME Section I Steam Power Boiler “V” steam lbs./hr. @ 3% accumulation 42 • Lower control ring ensures short, consistent blowdown • Tapped body drain allows piping of condensate away from equipment • Reduced repair costs; soft seat easily replaced • Registered in all Canadian Provinces under CSA B51 CRN #OG8547.5C Customer Service 1-704-841-6000 Plumbing and Heating ASME Section I & VIII Safety Valves 119 SERIES CAST IRON SAFETY VALVE Heavy-duty 119 Series cast iron valves are high capacity safety valves ideal for use with all types of boilers, pressure vessels and pressure piping systems. Their top-guided design includes two control rings that ensure seat tightness. Direct replacement for most competitive models. DESCRIPTION • Set pressures to 250 psig @ 450˚F maximum • Flanged inlet sizes: 1-1/2" through 6" ANSI 250 lb.; some sizes available in female NPT • National Board certified ASME flow ratings • Metal to metal seating, lapped to optical flatness • 316 Stainless Steel wetted trim (disc and nozzle) is standard Base Model Number 119 JGC 119 KHC 119 KHA 119 KJC 119 LJC 119 LJA 119 LKC 119 MKA 119 MKC 119 NMD 119 PMD 119 QPD 119 RPD Orifice J Orifice K Orifice L Set Press. psig 15 30 50 75 100 125 150 175 200 225 250 Valve Size(in.) 1-1/2 250# x 2 1/2 FNPT 2 250# x 3 FNPT 2 FNPT x 3 FNPT 2-1/2 250# x 3 FNPT 2-1/2 250# x 4 FNPT 2-1/2 FNPT x 4 FNPT 3 250# x 4 FNPT 3 FNPT x 4 FNPT 3 250# x 4 FNPT 4 250# x 6 125# 4 250# x 6 125# 6 250# x 8 125# 6 250# x 8 125# Sec. I lbs./hr. 1947 2868 4096 5646 7227 8809 10390 11971 13552 15133 16714 VIII Stm. lbs./hr. 2008 2929 4280 5969 7657 9346 11034 12723 14412 16100 17789 VIII Air SCFM 715 1043 1523 2124 2726 3327 3928 4529 5130 5731 6332 15 30 50 75 100 125 150 175 200 225 250 2761 4067 5809 8008 10250 12493 14735 16978 19220 21463 23705 2848 4154 6070 8465 10860 13255 15650 18045 20440 22834 25229 1014 1479 2161 3013 3865 4718 5570 6423 7275 8128 8980 15 30 50 75 100 125 150 175 200 225 250 4286 6314 9018 12432 15913 19394 22876 26357 29838 33320 36801 4421 6449 9423 13141 16859 20577 24295 28013 31731 35449 39167 1574 2295 3354 4678 6001 7324 8648 9971 11294 12618 13941 Customer Service 1-704-841-6000 • • • • Semi-nozzle design comes in eight orifice sizes Rust-proof steel stem, spring and spring washers Drip pan elbows are available (see page 44) Registered in all Canadian provinces and territories under CSA B51, CRN #0G8547.5C Orifice Orifice Dimensions(in.) Letter Area(Sq. in.) A B C J 1.36 15.00 4.00 4.31 K 1.93 16.00 4.00 4.62 K 1.93 16.00 4.00 4.62 K 1.93 16.00 4.00 4.62 L 2.99 22.00 5.12 5.62 L 2.99 22.00 5.12 5.62 L 2.99 22.00 5.12 5.62 M 3.77 22.00 5.12 5.62 M 3.77 22.00 5.12 5.62 N 4.55 28.00 7.25 6.75 P 6.69 28.00 7.25 6.75 Q 11.59 42.00 10.00 9.25 R 16.79 42.00 10.00 9.25 Orifice M Orifice N Orifice P Set Press. psig 15 30 50 75 100 125 150 175 200 225 250 Sec. I lbs./hr. 5410 7969 11382 15691 20085 24480 28874 33268 37662 42056 46451 VIII Stm. lbs./hr. 5580 8140 11894 16587 21280 25973 30666 35358 40051 44744 49437 VIII Air SCFM 1986 2897 4234 5904 7574 9245 10915 12586 14256 15926 17597 15 30 50 75 100 125 150 175 200 225 250 6522 9608 13723 18918 24215 29513 34811 40108 45406 50704 56002 6728 9814 14340 19998 25655 31313 36971 42629 48287 53944 59602 2395 3493 5104 7118 9132 11146 13160 15173 17187 19201 21215 15 30 50 75 100 125 150 175 200 225 250 9592 14131 20183 27823 35615 43407 51199 58990 66782 74574 82366 9895 14434 21091 29412 37733 46055 54376 62697 71018 79340 87661 3522 5138 7507 10469 13431 16393 19355 22317 25278 28240 31202 Wt./lbs. APP 35 36 3-3/4 37 41 84 5-3/8 81 85 5-3/8 80 87 210 215 530 530 Hex D Orifice Q Orifice R Information required for ordering 119 series valves: 1. Determine the orifice letter that corresponds to your required flow rate from the following capacity charts. 2. Select the inlet x outlet connection options from the list of models available for that orifice (above). 3. Specify base model number, set pressure, ASME Code section and service. For Further information request brochure SRCA9000 Set Press. psig 15 30 50 75 100 125 150 175 200 225 250 Sec. I lbs./hr. 16617 24480 34964 48200 61698 75197 88695 102193 115691 129189 142687 VIII Stm. lbs./hr. 17141 25004 36537 50952 65368 79783 94199 108614 123030 137445 151861 VIII Air SCFM 6101 8900 13005 18136 23267 28398 33529 38660 43791 48923 54054 15 30 50 75 100 125 150 175 200 225 250 24061 35446 50628 69791 89336 108880 128425 147969 167514 187059 206603 24820 36205 52903 73776 94649 115522 136395 157267 178140 199013 219886 8834 12887 18830 26260 33689 41119 48549 55978 63408 70837 78267 ASME Section I - Steam Boilers Pounds of saturated steam per hour @ 3% or 2 psig accumulation, whichever is greater. ASME Section VIII - Pressure Vessels Pounds of saturated steam per hour @ 10% or 3 psig accumulation, whichever is greater. ASME Section VIII - Pressure Vessels Standard cubic feet of air per minute @ 10% or 3 psig, whichever is greater. 43 Plumbing and Heating ASME Section I & VIII Safety Valves DRIP PAN ELBOW THE USE OF A DRIP PAN ELBOW IS HIGHLY RECOMMENDED FOR STEAM SERVICE SAFETY VALVES. When attached to a safety valve outlet, these elbows collect and remove condensate as well as isolate the valve from discharge piping stresses. Elbows through 4'' feature female NPT threads and connect to the valve outlet by means of a close nipple. The 6'' and 8'' elbows have integral 125# ANSI B16.1 flanges and bolt directly to the valve outlet. Model Number Q-5740-00 Q-5739-00 Q-5736-00 Q-5737-00 Q-5734-00 N-4098-00 N-4100-00 N-4102-00 N-4104-00 N-4106-00 Size (in.) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 A 1.50 1.50 2.00 2.00 3.00 4.00 4.00 6.00 8.00 10.00 B 3.75 3.75 5.50 5.50 6.25 7.37 8.00 9.62 12.75 16.50 Dimensions (in.) C D E 1.62 2.25 1.00 1.62 2.25 1.00 2.12 3.37 1.50 2.12 3.37 1.50 2.25 3.62 1.62 3.00 4.37 1.87 3.50 4.87 2.12 4.50 5.75 2.62 6.62 7.62 3.00 7.50 8.62 4.12 F 0.25 0.25 0.37 0.37 0.50 0.75 0.75 0.75 0.75 1.00 Approx. G Wt./lbs. 1.50 2.00 1.50 2.00 2.12 5.00 2.12 5.00 2.25 7.00 2.75 11.00 3.12 17.00 3.25 30.00 8.00 84.00 10.75 151.00 Note: Ordering size of drip pan elbow is also nominal outlet size of safety valve. 500 SERIES DESCRIPTION • Set pressures to 900 psig @ 800˚ F maximum • Inlet sizes 1/2" through 2" • Wide range of materials and options • High capacity full-nozzle design • Stainless steel springs are standard • Short “tuned” blowdown • API 527 Seat tightness • Back pressure tight bonnet design • Packed lever and screwed cap designs • One trim suitable for all types of service • Optional soft seating • CSA B51 CRN #OG8547.5C B Versatile ASME Section VIII safety relief valve certified for steam, air/gas and liquid service. Choice of bronze, carbon steel or stainless steel bodies to suit a wide range of applications. For Further information request brochure SRCA9000 A C Model Number 5XXDCD 5XXDDD 5XXDC 5XXDCD* 5XXDD 5XXDDD* 5XXED 5XXEE 5XXFE 5XXFF 5XXGF 5XXGG 5XXHG 5XXHH 5XXJH Orifice Designation D D D D D D E E F F G G H H J Size (in.) Inlet x Outlet 1/2 X 3/4 3/4 X 3/4 1/2 X 1 1/2 X 3/4 3/4 X 1 3/4 X 3/4 3/4 X 1-1/4 1 X 1-1/4 1 X 1-1/2 1-1/4 X 1-1/2 1-1/4 X 2 1-1/2 X 2 1-1/2 X 2-1/2 2 X 2-1/2 2X3 Flow Area(sq. in.) 0.13 0.13 0.13 0.13 0.13 0.13 0.23 0.23 0.36 0.36 0.59 0.59 0.92 0.92 1.50 *3/4" outlet option available with 510 and 520 bronze bodied models only. 44 Customer Service 1-704-841-6000 A (in.) 2.37 2.37 2.37 2.37 2.37 2.37 2.62 2.62 2.87 2.87 3.25 3.25 3.50 3.50 4.00 B (in.) 7.50 7.50 7.50 7.50 7.50 7.50 9.00 9.00 10.25 10.25 13.25 13.25 15.00 15.00 17.00 C (in.) 1.62 1.62 1.62 1.62 1.62 1.62 2.00 2.00 2.37 2.37 2.62 2.62 2.75 2.75 3.25 Wt. Ea. (lbs.) 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 5.0 5.0 9.0 9.5 15.5 16.0 23.0 Plumbing and Heating ASME Section I & VIII Safety Valves 500 SERIES MODEL NUMBERING SYSTEM 500 SERIES SAFETY RELIEF VALVE POSITION 1 2 3 4 5 6 7 8 CAP STYLE 3 ORIFICE LETTER J INLET H CONNECTION B SERVICE K SEAT M 51=BRONZE/BRASS 1=SCREWED CAP D C=1/2 52=BRONZE/ STAINLESS 2=SCREWED + GAG E D=3/4 53=CARBON/ STAINLESS 3=PACKED LEVER F E=1 54=ALL STAINLESS 4=PACKED + GAG G H J H=2 SERIES BODY/TRIM MAT'L 2 5 B=MNPT X FNPT J=SEC VIII LIQUID 9 10 11 SPECIAL OPTIONS A A 12 13 14 SET PRESSURE 0 4 2 5 M=METAL FACTORY ISSUED SET PRESSURE, K=SEC VIII AIR N=NEOPRENE LETTERS / NUMBERS OR SPECIAL OPTIONS OR FEATURES psig (4 DIGITS) L=SEC VIII STEAM K=PCTFE "AA"=DEFAULT STANDARD VACUUM F=1-1/4 M=NON CODE LIQUID V=VITON "HT" HIGH TEMP. SPRING "HG" PREFIX+ 2 DIGIT G=1-1/2 N=NON CODE AIR / GAS E=EPDM D=3/4" OUTLET 510 & 520 ONLY "OX" CLEARED FOR OXYGEN SERVICE P=NON CODE STEAM B=NITRILE Q=VACUUM S=SILICONE Notes: 1. The ASME Code Section VIII requires a lift lever for the following services: air, steam, or hot water over 140°F 2. Maximum back pressure is 50 psig. 3. High temperature stainless steel alloy spring is required above 422°F / 217°C. Specify option “HT” 4. Service limits for PCTFE seat: -330 to +250°F / -201 to 121°C Service Limits Series 510 520 530 540 Body Bronze Trim Brass Max. Set-Steam 250 psi Max Set-Air/Gas/Liquid 300 psi Temp. Limits -60 / 406˚F Bronze Stainless 300 psi 900 psi -60 / 422˚F Carbon Steel Stainless 900 psi 900 psi -20 / 800˚F Stainless Steel Stainless 900 psi 900 psi -60 / 800˚F Set Press. psig D 14 15 20 16 25 18 30 19 35 21 40 22 45 24 50 25 55 26 60 28 65 29 70 30 31 75 32 80 33 85 34 90 35 95 36 100 40 125 44 150 47 175 50 200 53 225 56 250 59 275 62 300 66 350 H 102 115 127 138 149 160 169 178 187 195 203 211 218 226 233 239 246 252 282 309 334 357 378 399 418 437 472 E 25 29 32 34 37 40 42 44 46 48 50 52 54 56 58 59 61 63 70 77 83 89 94 99 104 108 117 Orifice F 40 45 50 54 58 62 66 70 73 76 79 82 85 88 91 93 96 98 110 121 130 139 148 156 163 171 184 G 65 74 82 89 96 102 108 114 120 125 130 135 140 145 149 153 158 162 181 198 214 229 242 256 268 280 302 Customer Service 1-704-841-6000 J 167 189 208 226 244 261 277 292 306 320 333 345 357 369 381 392 402 413 462 506 546 584 619 653 685 715 772 Set Press. psig D 325 64 375 69 400 71 425 73 450 75 475 77 500 79 525 81 550 83 575 85 600 87 625 89 650 91 675 92 700 94 725 96 750 97 775 99 800 100 825 102 850 104 875 105 900 107 E 113 121 125 129 133 136 140 143 147 150 153 157 160 163 166 169 171 174 177 180 183 185 188 Orifice F 178 191 197 203 209 215 220 226 231 236 241 Note: 1.) Specify “HT” high temperature inconel springs for service temperatures beyond 422˚F 2.) Models 510, 520 and 540 are suitable for cryogenic service to -320˚F, subject to special preparation and use of “K” option PCTFE seat. Consult factory for details. G 291 313 323 333 343 352 361 370 379 388 396 H 455 489 505 520 535 550 564 J 744 799 826 851 876 900 923 ASME Section VIII WATER US GALLONS PER MINUTE OF WATER @ 10% OVERPRESSURE. NATIONAL BOARD CERTIFIED. Note: To determine water capacity at 25% overpressure, multiply the capacity at 10% by 1.066. 45 Plumbing and Heating ASME Section I & VIII Safety Valves 500 SERIES VERSATILE ASME SECTION VIII SAFETY RELIEF VALVE (CONTINUED) ASME SECTION VIII STEAM POUNDS PER HOUR OF SATURATED STEAM @ 10% OVERPRESSURE. NATIONAL BOARD CERTIFIED. Set Press. psig D 15 188 20 216 25 245 30 274 35 305 40 337 45 368 50 400 55 431 60 463 65 494 70 526 75 558 80 589 85 621 90 652 684 95 715 100 125 873 150 1031 175 1189 200 1346 1504 225 250 1662 275 1820 300 1977 325 2135 350 2293 375 2451 400 2608 425 2766 450 2924 475 3082 500 3239 525 3397 550 3555 575 3713 600 3870 625 4028 650 4186 675 4344 700 4501 725 4659 750 4817 775 4975 800 5132 825 5290 850 5448 875 5606 900 5763 Approx. 1 psi Increment 6.3 46 Orifice E F 331 520 381 600 432 679 482 759 538 846 593 934 649 1021 705 1108 760 1196 816 1283 872 1371 927 1458 983 1546 1038 1633 1094 1721 1150 1808 1205 1896 1261 1983 1539 2421 1817 2858 2095 3295 2373 3733 2651 4170 2929 4607 3207 5045 3485 5482 3763 5919 4041 6357 4319 6794 4597 7231 4875 7669 5153 8106 5431 8543 5709 8981 5987 9418 6266 9855 6544 10293 6822 10730 7100 7378 7656 7934 8212 8490 8768 9046 9324 9602 9880 10158 11.1 17.5 G 853 984 1114 1245 1388 1532 1676 1819 1963 2106 2250 2393 2537 2680 2824 2968 3111 3255 3972 4690 5408 6126 6843 7561 8279 8997 9714 10432 11150 11867 12585 13303 14021 14738 15456 16174 16892 17609 H 1332 1536 1740 1943 2168 2392 2616 2840 3064 3288 3512 3736 3960 4184 4408 4632 4857 5081 6201 7322 8442 9562 10683 11803 12924 14044 15165 16285 17405 18526 19646 20767 21887 23008 J 2180 2513 2846 3180 3546 3913 4280 4646 5013 5380 5746 6113 6479 6846 7213 7579 7946 8313 10146 11979 13812 15645 17478 19312 21145 22978 24811 26644 28477 30311 32144 33977 35810 37643 28.7 44.8 73.3 ASME SECTION VIII AIR STANDARD CUBIC FEET OF AIR PER MINUTE @ 10% OVERPRESSURE. NATIONAL BOARD CERTIFIED. Set Press. psig D 15 67 20 77 25 87 30 97 35 109 40 120 45 131 50 142 55 154 60 165 65 176 70 187 75 198 80 210 85 221 90 232 243 95 255 100 125 311 150 367 175 423 200 479 535 225 250 592 275 648 300 704 325 760 350 816 375 872 400 928 425 985 450 1041 475 1097 500 1153 525 1209 550 1265 575 1321 600 1378 625 1434 650 1490 675 1546 700 1602 725 1658 750 1715 775 1771 800 1827 825 1883 850 1939 875 1995 900 2051 Approx. 1 psi Increment 2.2 Customer Service 1-704-841-6000 E 118 136 154 172 191 211 231 251 271 290 310 330 350 370 389 409 429 449 548 647 746 845 944 1043 1142 1240 1339 1438 1537 1636 1735 1834 1933 2032 2131 2230 2329 2428 2527 2626 2725 2824 2923 3022 3121 3220 3319 3418 3517 3616 F 185 213 242 270 301 332 363 395 426 457 488 519 550 581 612 644 675 706 862 1017 1173 1329 1484 1640 1796 1951 2107 2263 2418 2574 2730 2885 3041 3197 3352 3508 3664 3819 4 6.2 Orifice G 304 350 397 443 494 545 596 648 699 750 801 852 903 954 1005 1056 1107 1158 1414 1669 1925 2180 2436 2691 2947 3202 3458 3713 3969 4224 4480 4735 4991 5246 5501 5757 6012 6268 10.2 H 474 547 619 692 772 851 931 1011 1091 1170 1250 1330 1410 1489 1569 1649 1729 1808 2207 2606 3005 3404 3802 4201 4600 4999 5398 5796 6195 6594 6993 7392 7791 8189 J 776 895 1013 1132 1262 1393 1523 1654 1784 1915 2045 2176 2306 2437 2567 2698 2828 2959 3611 4264 4916 5569 6221 6874 7526 8179 8831 9484 10136 10789 11441 12094 12746 13399 16 26.1 Plumbing and Heating ASME Section I & VIII Safety Valves ASME AIR RELIEF VALVES 15 SERIES DESCRIPTION • National Board certified 15 psig through 250 psig • Stainless steel springs with silicone soft seat Set Pressure psig 15 20 25 30 35 40 50 60 75 80 100 120 125 140 150 160 165 175 180 200 220 230 235 250 Model Number 15-112 15-115 15-117 15-118 15-119 Suffix No. -A2 -A0 -A1 -A3 -A5 -01 -B3 -02 -03 -04 -05 -06 -07 -08 -09 -10 -J1 -11 -12 -13 -14 -R8 -15 -16 • Viton O-ring seat, 3/4'' & 1'' only • Maximum Temp. 325˚F • Registered in all Canadian provinces and territories: CRN #0G8547.5C • ASTM B16 Brass Body Capacities in SCFM @ 10% Accumulation 15-112 15-115 & 117 15-118 1/4" 3/8" or 1/2" 3/4" 60 107 70 124 79 140 88 156 98 174 43 109 193 51 128 229 60 149 265 72 179 319 76 190 337 92 230 409 108 271 481 112 281 499 124 312 553 133 332 589 141 353 625 145 363 644 153 383 680 157 393 698 173 432 770 475 842 495 878 505 896 535 950 Inlet Size (in.) 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT Customer Service 1-704-841-6000 Dimensions (in.) A B 2.625 .78 3.250 1.125 3.375 1.125 1.218 4.062 1.875 5.125 15-119 1" 222 256 290 323 361 398 473 547 659 696 845 995 1032 1144 1218 1293 1330 1405 1442 1591 1740 1815 1852 1964 A B National Board certified capacities for air and gas service in air compressors, air receivers and gas lines. Use key to designate last two digits of product number. Other factory settings available upon request. Wt./100 (lbs.) 18.5 42.2 45.3 58.0 153.0 47 Plumbing and Heating Vacuum Relief Valves VACUUM RELIEF VALVES FOR WATER HEATER PROTECTION Automatically vents a system if a vacuum should occur. Prevents siphoning of the water from the system and collapse of a tank. Design certified by CSA in accordance with ANSI Z21.22. Also suitable for low pressure (15 psig maximum) steam service. 37 SERIES DESCRIPTION • Maximum temperature: 250°F • Rated for water pressures to 200 psig • Model 37-200 brass body (EPDM rubber seat) Model Number 37-201 37-202 37-200 Hydronic Heating Specialties 16-XT SERIES • Auto-vacuum relief at less than 1/2" vacuum • Venting capacity as measured in cfm of air @ 2" mercury (vacuum) Size (in.) 1/2 3/4 Wt./100 (lbs.) 30.4 32.4 Venting Capacity 15 CFM 16 CFM Suffix key: Satin Brass - 01; Satin Chrome - 02 *NOTE: These valves are not designed for anti-siphon backflow prevention. To prevent back-siphonage of polluted water into a potable water system, choose from Conbraco’s line of backflow preventers. EXPANSION TANKS FOR HYDRONIC SYSTEMS Conbraco non-potable expansion tanks help maintain balanced pressure throughout a hot water heating system by absorbing thermal expansion. Pre-pressurized, they’re designed to prevent system damage and unnecessary discharges by relief valves and ensure long, trouble-free system life. 1/2'' NPT A DESCRIPTION • Welded steel construction • Rugged flexible diaphragm • Pre-charged at 12 psig • Compact design saves energy and space • Glycol compatible • Maximum working pressure: 150 psig • Ideal for peak use systems such as car washes, processing plants, hotels/motels, commercial laundries. B Model Number 16-XT1-02 16-XT3-02 16-XT5-02 16-XT7-02 27 SERIES Capacity (gal.) 2.1 5.0 6.5 13.5 Exp. Vol. (gal.) 1.4 3.0 4.2 8.5 A 11.75 16.00 14.00 20.00 Net Wt. (lbs.) 5.1 9.3 9.9 19.1 B 8.00 10.50 12.75 15.75 RADIATOR AIR VALVE Model Number 27-202-02 H-2404-00 35 SERIES Connection 1/2 NPT 1/2 NPT 1/2 NPT 1 NPT Wt./100 (lbs.) 2.0 0.9 Size (in.) 1/8 Key only ALL BRONZE FEED WATER PRESSURE REGULATORS Available in 1/2" union threaded, threaded and solder union configurations. Purge lever/fast fill feature. Cartridge replaceable in-line. DESCRIPTION • No cage screws • Individually set at 15 psig - Adjustable 10 to 25 psig • Temperatures to 210°F Model Number 35-503-01 35-603-01 35-703-01 48 Size (in.) 1/2 Union Threaded 1/2 Threaded 1/2 Solder Union Customer Service 1-704-841-6000 • High capacity • SS strainer, in-line, standard • Choice of inlet connections Height (in.) 5.25 5.25 5.25 Length (in.) 4.31 3.50 3.18 Wt./100 (lbs.) 255 225 232 Plumbing and Heating Hydronic Heating Specialties ALL BRONZE COMBINATION BACKFLOW PREVENTER & FEED WATER REGULATORS 35-6A3 & 35-6H3 SERIES Positive protection against backflow when supply pressure falls below system pressure. DESCRIPTION • Designed for continuous pressure, hot or cold water service Model Number 35-6A3-BF 35-6H3-BF Size (in.) 1/2 Union NPT x NPT 1/2 Solder Union x NPT Height (in.) 5.25 5.25 Wt./100 (lbs.) 450 440 Length (in.) 8.50 8.50 35-403 SERIES MULTI-ORIFICE CONTROL VALVE Provides flow control on tankless heaters; for delivery of 2-1/2, 3, 3-1/2, and 4 GPM. Easy adjustment. DESCRIPTION • Maximum temperature: 250°F • Maximum pressure: 150 psig Model Number 35-403-01 Size (in.) 1/2 Solder Height (in.) 2.11 Length (in.) 2.00 Wt./100 (lbs.) 42.8 35FC SERIES ALL BRONZE HYDRONIC FLOW CHECK VALVES The flow check is designed to provide positive shut-off when water service is interrupted. DESCRIPTION • • • • • Corrosion resistant Wear resistant metal to metal seat Replaceable seat assembly By-pass option Sweat or thread connection available Model Number 35-FC4-01 35-FC5-01 35-FC6-01 35-FC7-01 35-FC8-01 35-FC4-02 35-FC5-02 Size (in.) 3/4 1 1-1/4 1-1/2 2 3/4 1 Customer Service 1-704-841-6000 • Designed for easy maintenance • Suitable for hot or cold water service • Maximum working pressure 50 psi. for 3/4" - 1-1/4" 125 psig for 1-1/2" - 2" • Maximum operating temperature 250˚F Connection NPT NPT NPT NPT NPT Sweat Sweat Wt./100 (lbs.) 233 261 502 867 1220 112 155 49 Plumbing and Heating Hydronic Heating Specialties 57 SERIES GLOBE VALVES Globe valves offer a 200 psig rating and aluminum wheel handle. Model Number 57-001-01 57-002-01 58 SERIES Size (in.) 1/4 NPT x 1/4 NPT 3/8 NPT x 3/8 NPT Wt./100 (lbs.) 28.0 37.1 BALANCING VALVES Provide dependable hydronic control; for use with 1/2" and 3/4" copper water piping. Pressure rated to 150 psig. Model Number 58-003-01 58-004-01 78-668 SERIES Size (in.) 1/2 Solder 3/4 Solder Cv 4 14 Wt./100 (lbs.) 30.0 53.4 BRONZE PURGE, BALANCE & SHUT-OFF VALVE Straight-through flow; all brass cover and chain prevent accidental system drainage; hose thread connection for disposal of drained media. Model Number 78-668-01 78-668-02 78-671-01* Size (in.) 3/4 1 3/4 *Available with screwdriver slotted stainless steel stem. 50 Customer Service 1-704-841-6000 Wt./100 (lbs.) 206 359 198 Plumbing and Heating Mixing Valves “Point of Source” MIXING VALVES Designed to provide extension of water heater capacity and hot water temperature control in residential applications. Numbered indicator control allows easy setup and fingertip control. Available in low or high temperature options depending on application. TV Series DESCRIPTION • Bronze body • Thermoplastic shuttle assembly • Thread or solder connections • Low temperature range (100°-130°F) • High temperature range (110°-150°F) • Stainless steel spring and rings Size (in.) 1/2 3/4 1/2 3/4 Connection Solder Solder Threaded Threaded Low Temp. 100˚-130˚ 35-203-L1 35-204-L1 35-205-L1 35-206-L1 High Temp 110˚-150˚ 35-203-01 35-204-01 35-205-01 35-206-01 Wt./100 (lbs.) 88.00 101.00 88/99.50 113.00 To order Repair Kits use part numbers 35-200-01RK, 35-200-L1RK 34A & 34H SERIES THERMOSTATIC MIXING VALVES 34A Series are ASSE 1017 certified mixing valves designed for hot water distribution systems; 34H Series are designed for radiant heat applications, to provide better control of hot water supply. Numbered indicator control allows easy setup and fingertip control. Available in low or high temperature range options depending on application. Integrated check provides added protection of thermostat and cross connection control. DESCRIPTION • Union threaded or solder connections • Integrated check • High flow capacity • Broad temperature range • Cold water failure protection • Low temperature range (85°-140°F) • High temperature range (120°-180°F) • Stainless steel spring • Bronze body • Supply pressures to 125 psig Size (in.) 1/2 1/2 3/4 3/4 1 1 1/2 1/2 3/4 3/4 1 1 Low Temp. 85˚-140˚ 34A-103-01 34A-103-02 34A-104-01 34A-104-02 34A-105-01 34A-105-02 34A-113-01 34A-113-02 34A-114-01 34A-114-02 34A-115-01 34A-115-02 Connection Sweat Thread Sweat Thread Sweat Thread Sweat/Check Thread/Check Sweat/Check Thread/Check Sweat/Check Thread/Check High Temp 120˚-180˚ 34H-103-01 34H-103-02 34H-104-01 34H-104-02 34H-105-01 34H-105-02 34H-113-01 34H-113-02 34H-114-01 34H-114-02 34H-115-01 34H-115-02 34C SERIES COMMERCIAL HIGH CAPACITY MIXING VALVES 34C Series ASSE 1017 listed, high-capacity mixing valves are thermostatically controlled regulating valves designed for use in large commercial potable and non-potable hot water systems. Simple adjustment of water temperature from 90°-140°F or 130°-180°F. DESCRIPTION • Installs easily on heating source • Patented design for easy in-line maintenance • Supply pressures to 150 psig • U. S. Patent No. 6,328,219 • Sizes: 3/4", 1", 1-1/4", 1-1/2", 2" • Low temp range (90°-140°F) • High temp range (130°-180°F) • Threaded connections Size (in.) 3/4 1 1-1/4 1-1/2 2 Low Temp.* 90˚-140˚ F 34C-104-01 34C-105-01 34C-106-01 34C-107-01 34C-108-01 High Temp. 130˚-180˚ F 34C-104-H1 34C-105-H1 34C-106-H1 34C-107-H1 34C-108-H1 *ASSE 1017 Certified Customer Service 1-704-841-6000 51 Plumbing and Heating Water Heater Accessories 40-XT SERIES EXPANSION TANKS FOR POTABLE SYSTEMS 3/4 NPT Designed to protect closed water supply systems, appliances and piping from the hazards of thermal expansion, such as premature water heater failure. Installs easily on direct fired gas, oil and electric hot water heaters and storage tanks. Their pre-pressurized steel design includes an expansion membrane that stops any contact between the water and air in the tank. A DESCRIPTION B • Ideal for use in dorms, apartments, office buildings and hospitals • Maximum working pressure: 150 psig • 100 percent non-metallic non-corrosive water reservoir Model Number 40-XT1-02 40-XT3-02 40-XT5-02 40-XT7-02 78-RV SERIES Capacity (Gal.) 2.1 5.0 6.5 13.5 Exp. Vol. (Gal.) 1.25 3.00 4.20 8.00 • Field-adjustable pre-charge • Compatible with most standard water heaters and storage tanks Connection 3/4 NPT 3/4 NPT 3/4 NPT 1 NPT Dimensions (in.) A B 11.75 8.00 16.00 10.50 18.50 12.75 23.25 15.75 Net Wt. (lbs.) 5.3 9.7 10.4 21.0 BRONZE WATER HEATER SHUT-OFF VALVES WITH THERMAL EXPANSION CONTROL VALVE These valves provide thermal expansion protection and water heater shut-off in a single, simple installation. They’re space-saving and a less costly alternative to large expansion tanks for avoiding potential hazards in closed systems. DESCRIPTION • Sweat and threaded connections available • Corrosion-resistant all-bronze body • Chrome-plated ball • Stainless steel fasteners and springs • Bubble-tight shut-off • Listed with IAPMO • Listed with SBCCI PST & ESI 78- X SIZE (in.) 3 - 3/4 SWT 4 - 3/4 THD 5 - 1 SWT 6 - 1 SWT 7*- 3/4 PEX • Control valve available with hose barb fitting, 1/2" pex fitting, compression fitting or 1/2" combination sweat/thread fitting which makes discharge piping assembly easy • Expansion control valve taps into side of shut-off valve X PRESSURE SETTING -0 - 125 psig -1 - 100 psig -2 - 80 psig X -RV RELIEF VALVE CONNECTION 4 - Hose barb 5 - Pex 6 - Compression fitting 7 - 1/2" NPT/SWT fitting *Not listed with IAMPO or SBCCI Note: 80 PSI only listed with SBCCI and ESI. 52 Customer Service 1-704-841-6000 Plumbing and Heating Mixing Valves “Point of Use” “POINT OF USE” MINI-MIXER 34D Series ASSE 1070 certified, “point of use” mixing valves are designed to sense and maintain preset outlet temperature compensating for fluctuations in hot and cold water temperatures and pressures. The mixed water temperature range is 85˚F to 120˚F and will hold a desired temperature within a ±2˚F at all times. The 34D also has an adjustable temperature limit stop to prevent the valve from being set above 120˚F. 34D SERIES DESCRIPTION • • • • • • • • • Corrosion Resistant Compression and IPS connections Easy maintenance Consistent outlet temperature with changing inlet conditions • Elevated temperature thermal element protection Nickel plate option Saves energy by extending hot water supply Tamper resistant Scald protection Integrated check valves Single Outlet Model Number 34D-111-01 34D-111-08 34D-112-01 34D-112-08 34D-122-01 34D-122-08 Size (in.) Inlet x Outlet 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 1/2 IPS 3/8 COMP. x 1/2 IPS 1/2 IPS x 1/2 IPS 1/2 IPS x 1/2 IPS Finish Bronze Chrome Plated Bronze Chrome Plated Bronze Chrome Plated Double Outlet Model Number 34D-211-01 34D-211-08 34D-212-01 34D-212-08 34D-222-01 34D-222-08 Size (in.) Inlet x Outlet 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 1/2 IPS 3/8 COMP. x 1/2 IPS 1/2 IPS x 1/2 IPS 1/2 IPS x 1/2 IPS Finish Bronze Chrome Plated Bronze Chrome Plated Bronze Chrome Plated 34D Single Outlet “Point Of Use” Mini Mixer 34D Double Outlet “Point Of Use” Mini Mixer 34B SERIES SCALD PROTECTION MIXING VALVES 34B Series ASSE 1070 certified mixing valves are designed to be used for individual or multiple fixtures for flow as high as 11 GPM. These valves use a thermostatic element that senses outlet temperature and will compensate for fluctuating inlet temperature and pressure. The mixed water temperature range is 85°-120°F and will hold a desired temperature within +3° or -3°F at all times. The 34B also has an adjustable temperature limit stop to prevent the valve from being set above 120°F. DESCRIPTION • Integrated checks • Cold water failure protection • Built in temperature limit stop • Supply pressures to 125 psig • Temperature range (85°-120°F) • Stainless steel spring • Bronze body • Threaded or solder connections Size (in.) 1/2 1/2 3/4 3/4 1 1 1/2 1/2 3/4 3/4 1 1 Connection Sweat Thread Sweat Thread Sweat Thread Sweat/Check Thread/Check Sweat/Check Thread/Check Sweat/Check Thread/Check Customer Service 1-704-841-6000 Model Number Low Temp. 85˚-120˚ 34B-103-01 34B-103-02 34B-104-01 34B-104-02 34B-105-01 34B-105-02 34B-113-01 34B-113-02 34B-114-01 34B-114-02 34B-115-01 34B-115-02 53 Plumbing and Heating Water Pressure Reducing Valves 36 SERIES WATER PRESSURE REDUCING VALVES Controls high water pressure and problem fluctuations. Reduces supply pressures up to 300 psig to more functional range. Factory set at 50 psig; adjusts with turn of a bolt. DESCRIPTION • Replaceable cartridge • Comes standard with union pipe end • Corrosion resistant • Available in sizes from 1/2" to 2" • No cage screws • Meets ASSE and CSA standards; listed with IAPMO • Built-in by-pass, high-capacity strainer 36- X X - X X END CONNECTION OPTIONS 1-Single Union NPT x NPT S-Stainless Trim 2-NPT x NPT 3-Single Solder Union x NPT 4-Double Union NPT x NPT 5-Double Union Solder x Solder 8-Less Unions 9-Pex x Pex 36 SERIES JUMP KIT 36 Series Water Capacity (GPM) Pipe Pressure Differential (psi) Size Fall Off (in.) (psi) 25 50 75 1/2 5 1.7 2.0 2.3 10 4.3 5.0 5.8 15 8.5 10.0 11.5 20 15.3 18.0 20.7 3/4 5 3.4 4.0 4.6 10 7.7 9.0 10.4 15 14.5 17.0 19.6 20 22.1 26.0 29.9 1 5 5.1 6.0 6.9 10 11.9 14.0 16.1 15 22.1 26.0 29.9 20 34.0 40.0 46.0 1-1/4 5 8.5 10.0 11.5 10 19.6 23.0 26.5 15 35.7 42.0 48.3 20 52.7 62.0 71.3 1-1/2 5 11.9 14.0 16.1 10 27.2 32.0 36.8 15 47.6 56.0 64.4 20 68.0 80.0 92.0 2 5 15.3 18.0 20.7 10 39.1 46.0 52.9 15 66.3 78.0 89.7 20 93.5 110.0 126.5 54 X BODY O-Standard G-Tapped and Plugged 1/4" NPT P-Tapped and 1/4" NPT 1/4" NPT w/ Pressure Gauge PRESSURE RANGE 1-25-75psig (Standard) 2-10-35 psig 3-75-125 psig Same rough end dimensions as a PRV but used as a spacer to flush system. Model Number 36-406-JK 36-506-JK 36-404-JK 36-405-JK 36-504-JK 36-505-JK 36 SERIES PRV Flow rate vs. Pressure Fall-Off SIZE (in.) 3 - 1/2 4 - 3/4 5-1 6 - 1-1/4 7 - 1-1/2 8-2 Size(in.) 1-1/4 1-1/4 3/4 1 3/4 1 Description for 36-406 (threaded) for 36-506 (solder) for 36-404 (threaded) for 36-405 (threaded) for 36-504 (solder) for 36-505 (solder) Note: Flow data is based on static conditions of: Inlet pressure =100 psig: Outlet pressure = 50 psig. All data is for female NPT versions only. Pressure fall-off is the pressure by which the outlet pressure drops as flow demand is needed. 36-100 & 36-300 Series Model Numbers Pipe Thread Solder Joint Union x FNPT Union x FNPT 36-103 36-303 36-104 36-304 36-305 36-105 36-106 36-306 36-107 36-307 36-108 36-308 36-200 Series Model Numbers 36-203 36-204 36-205 36-206 36-207 36-208 36-400 & 36-500 Series Model Numbers Double Union Double Union Solder x Solder NPT x NPT 36-503 36-403 36-404 36-504 36-505 36-405 36-406 36-506 36-407 36-507 36-408 36-508 36-800 Series Model Numbers 36-806 36-900 & 36-9C4 Series Model Numbers 36-904 36-9C4 Customer Service 1-704-841-6000 Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 1/2 3/4 1 1-1/4 1-1/2 2 Size(in.) 1/2 3/4 1 1-1/4 1-1/2 2 Dimensions (in.) A B C 6.12 4.62 1.00 6.12 4.62 1.00 6.50 5.12 1.12 8.62 6.37 1.37 8.62 6.62 1.37 11.75 8.44 1.81 6.12 6.12 6.50 8.62 8.62 11.75 3.69 3.69 4.06 5.19 5.31 7.12 1.00 1.00 1.12 1.37 1.37 1.81 Dimensions (in.) A B C 1.00 5.81 6.12 6.12 5.81 1.00 1.12 6.50 6.50 8.62 7.69 1.37 8.62 8.00 1.37 11.75 10.06 1.81 Wt./100 (lbs.) 350 340 450 1020 1045 2250 311 305 415 910 909 1880 Wt./100 (lbs.) 389 372 495 1090 1183 2472 1-1/4 8.62 5.81 1.37 910 3/4 3/4 6.12 6.12 5.81 5.81 1.00 1.00 372 372 Plumbing and Heating Water Pressure Reducing Valves 36C SERIES COMPACT CORROSION RESISTANT PRESSURE REDUCING VALVES Handles supply pressures up to 400 psig; working temperatures to 180°F. All-bronze body, corrosion resistant cage, stainless steel strainer and seat. Meets ASSE and CSA standards; listed with IAPMO. DESCRIPTION • Working temperatures to 180˚F • Standard factory setting: 50 psi • Adjusts from 25 to 75 psi (standard) • Designed to meet local plumbing codes 36C- X 0 6" • Balanced piston design • Extended control of high pressure conditions using brass adjusting screw • Pipe union, meter union, female NPT or solder-joint connection options X - X END CONNECTION SIZE (in.) 1-Single Union NPT x NPT (U) 3 - 1/2 2-NPT x NPT (Standard) 4 - 3/4 3-Single Solder Union x NPT (-US) 5 - 1 4-Double Union NPT x NPT (-U2T) 5-Double Union Solder x Solder (-U2S) 6-Single Union Meter x NPT (-UM) 7-90˚ Elbow Meter Union x NPT (-EMT) 8-Less Unions 9-Pex x Pex X CLEANOUT 0-Standard G-Tapped and Plugged 1/4 NPT (-GT) P-Tapped and 1/4 NPT w/ Pressure Gauge (-G) - PRESSURE RANGE 1-25-75 psig 2-10-35 psig (-LP) 3-75-125 psig (-HP) A X OPTIONS S-Stainless Steel Trim X-Extended Union Length Note: Not all variations are available in each size. Check with customer service. 36C SERIES JUMP KITS Same rough end dimensions as a PRV but used as a spacer to flush system. Model Number 36C-404-JK 36C-504-JK 36C-405-JK 36C-505-JK Size (in.) 3/4 3/4 1 1 Model Number Size (in.) Length NPT Threaded Inlet x Outlet 36C-203 1/2 3.50 36C-204 3/4 3.50 3.75 36C-205 1 NPT Threaded Union Inlet x NPT Outlet 36C-103 1/2 4.41 36C-104 3/4 4.41 4.75 36C-105 1 Sweat Union Inlet x NPT Outlet 1/2 4.41 36C-303 36C-304 3/4 4.75 36C-305 1 4.41 Double Union/Threaded Inlet x Threaded Inlet 5.37 1/2 36C-403 36C-404 3/4 5.37 36C-405 1 5.87 Double Union/Sweat Inlet x Sweat Outlet 36C-503 1/2 5.37 36C-504 3/4 5.37 36C-505 1 5.87 90˚ Meter Thread Union Inlet x NPT Outlet 9.62 36C-704 1 x 3/4 13.44 36C-705 1x1 Less Unions 36C-804 3/4 3.50 3.75 36C-805 1 Double Union/Pex Inlet x Pex Outlet 36C-903 1/2 5.37 36C-904 3/4 5.37 Customer Service 1-704-841-6000 Description for 36C-404 (threaded) for 36C-504 (solder) for 36C-405 (threaded) for 36C-505 (solder) Dimensions (in.) A (lbs.) 1.62 1.62 1.50 200 200 225 1.62 1.62 1.50 240 240 270 1.62 1.62 1.50 240 240 270 1.62 1.62 1.50 280 280 310 1.62 1.62 1.50 280 280 310 1.62 1.50 400 580 1.62 1.50 211 218 1.62 1.62 280 280 Wt./100 36C SERIES PRV Flow rate vs. Pressure Fall-Off Note: Flow curves are based on static conditions of: Inlet pressure =100 psig: Outlet pressure = 50 psig. All curves are for female NPT versions only. Pressure fall-off is the pressure by which the outlet pressure drops as flow demand is needed. 36C Series Water Capacity (GPM) Pipe Size Fall Off Pressure Differential (psi) 25 50 75 (in.) (psi) 1/2 5 1.30 1.50 1.70 5.50 6.30 4.70 10 15 10.60 12.50 14.40 20 15.30 18.00 20.70 2.50 2.90 2.10 5 3/4 10 6.80 8.00 9.20 15 13.20 15.50 17.80 20 18.30 21.50 24.70 2.80 3.30 3.70 5 1 10 8.50 10.00 11.50 15 15.30 18.00 20.70 20 21.30 25.00 28.80 55 Plumbing and Heating Water Pressure Reducing Valves SUPER CAPACITY ALL BRONZE PRESSURE REDUCING VALVES 36H Series Available with optional rugged Y strainer for commercial and light industrial applications. Controls supply pressures up to 400 psig. DESCRIPTION • Bronze body and cage, stainless steel replaceable seat • Sizes: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2" & 3" NPT - threads (inlet and outlet): 2", 21/2" and 3" offered in 150 lb. flange • Bottom access for easy in-line repair • Sealed case • Stainless steel bolts, adjustment screws and spring • Designed to meet ASSE and CSA standards; listed with IAPMO • Large yoke-type design aids flow and reduces resistance • Initial pressure up to 400 psig • Maximum temperature 180°F • Integral by-pass relief protects against thermal expansion 36H- X X END CONNECTION 2-NPT x NPT (Standard) 7-Flanged (2"-3" only) OPTIONS 0-Standard 1-W/Y Strainer X -0 SIZE (in.) 3 - 1/2 4 - 3/4 5-1 6 - 1-1/4 7 - 1-1/2 8-2 9 - 2-1/2 0-3 X PRESSURE RANGE 1-25-75 psig (Standard) 2-10-35 psig 3-75-125 psig Note: Not all variations are available in each size. Check with customer service. 36H SERIES PRV Flow rate vs. Pressure Fall-Off Size (NPT) (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 Flanged 2 2-1/2 3 A 4.12 4.12 4.82 6.75 6.19 8.12 8.12 10.37 B 2.25 2.25 2.31 3.19 3.19 3.50 3.50 3.94 Dimensions (in.) C D 1.87 7.00 7.00 2.44 7.50 4.00 10.00 3.37 10.00 3.87 12.50 4.62 12.50 5.94 15.12 6.94 E 8.37 9.00 10.25 12.50 13.12 16.00 16.69 20.50 Wt. With Wt. Without F Strainer Strainer 4.00 7 6 4.00 8 6 4.69 12 8 6.50 29 24 6.50 29 23 7.62 47 38 7.62 49 37 9.75 87 70 10.37 10.37 12.50 3.50 3.50 3.94 12.50 12.50 15.12 20.00 21.69 24.50 7.62 7.62 9.75 6.25 7.12 8.12 79 105 136 49 55 92 Note: Flow data is based on static conditions of: Inlet pressure =100 psig: Outlet pressure = 50 psig. All data is for female NPT versions only. Pressure fall-off is the pressure by which the outlet pressure drops as flow demand is needed. 56 Customer Service 1-704-841-6000 36H Series Water Capacity (GPM) Pipe Size Fall Off Pressure Differential (psi) (in.) (psi) 25 50 75 1/2 5 8.5 10.0 11.5 10 13.6 16.0 18.4 15 17.9 21.0 24.2 20 21.3 25.0 28.8 3/4 5 10.6 12.5 14.4 10 20.4 24.0 27.6 38.0 33.0 28.1 15 20 34.0 40.0 46.0 1 5 17.0 20.0 23.0 40.3 35.0 29.8 10 15 40.8 48.0 55.2 20 51.0 60.0 69.0 1-1/4 5 21.3 25.0 28.8 10 51.9 61.0 70.2 95.0 109.3 80.8 15 20 106.3 125.0 143.8 1-1/2 5 29.8 35.0 40.3 61.5 72.3 83.1 10 90.1 106.0 121.9 15 20 113.1 133.0 153.0 2 5 55.3 65.0 74.8 10 126.7 149.0 171.4 15 174.3 205.0 235.8 231.2 272.0 312.8 20 2-1/2 5 58.7 69.0 79.4 132.6 156.0 179.4 10 15 200.6 236.0 271.4 20 271.2 319.0 366.9 95.0 109.3 80.8 5 3 10 176.0 207.0 238.1 15 282.5 332.4 382.3 365.5 430.0 494.5 20 Plumbing and Heating Water Pressure Reducing Valves W-8078-00 SERIES 3/4" HOSE THREAD PRESSURE GAUGES This hose connection pressure gauge includes a high pressure memory indicator that is used for testing water pressure. Temp. range: 50°F to 130°F. Model Number W-8078-00 Pressure Range 0-300 psig Customer Service 1-704-841-6000 Wt./100 (lbs.) 46 57 Plumbing and Heating ASME Section IV Hot Water Relief Valves For additional information see catalog SRCA9000 10 SERIES SECTION IV ASME HOT WATER RELIEF VALVES These capacity-certified relief valves protect against excessive water pressure (from thermal expansion) and steam generated when Btu input controls fail. Valves comply with ASME Section IV requirements. Ideal for use with hot water boilers and heating systems. DESCRIPTION • Pressures from 20 to 150 psig • Brass or bronze body available with optional satin or polished chrome finish • Maximum temperature service: 250°F • 10-321 in polished chrome only • Registered in all Canadian provinces and territories, CRN #0G8547.5C 10-102 10-303 SUFFIX KEY Part Number Pressure psig 20 22 25 30 35 40 43 45 50 55 60 10-214 10-104 10-301 10-408 10-418 Plain Brass -02 -03 -04 -05 -06 -07 -08 -09 -10 -11 -12 • Stainless steel springs standard except 10-214 • 10-624/634 are high capacity safety relief valves ideal for OEM applications • 10-418/417 are ideal for use in swimming pool heater applications Satin Chrome -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 Polished Chrome -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 Note: When ordering, specify pressure and finish by adding the two digit suffix after the product number, i.e. 10-102-05: 3/4" FNPT x 1" FNPT at 30 psig with plain brass finish. 10-321 Certified Size(in.) Pressure Model Inlet Outlet Range Height 10-624 3/4 M 3/4 F 30-150 4.62 4.62 10-634 3/4 F 3/4 F 30-150 10-624 OEM Style 10-407 & 10-417 *Certified Capacity Wt./100 30 75 100 125 150 106 689,000 1,405,000 1,802,000 2,199,000 2,597,000 106 689,000 1,405,000 1,802,000 2,199,000 2,597,000 Note: To order 10-620 series add pressure set point to the end of base number (i.e. 10624150=150psig). Model Number 10-102 10-104 10-214 10-301 10-303 10-321 10-407 10-408 10-417 10-418 Size(in.) Outlet Inlet NPT NPT 3/4 F 1F 3/4 M 1F 1F 1F 3/4 M 3/4 F 3/4 F 3/4 F 3/4 M 3/4 F 3/4 M 3/4 F 3/4 F 3/4 F 3/4 F 3/4 M 3/4 F 3/4 F Certified Pressure Range psig 20-60 20-60 20-65 20-60 20-60 20-60 30 30 20-80 20-80 Height (in.) 3.31 3.75 5.00 3.75 3.31 3.75 3.00 2.75 3.00 2.75 30 Wt./100 (lbs.) psig 105 710,000 109 710,000 227 1,000,000 114 550,000 115 550,000 123 425,000 62 535,000 535,000 65 62 477,000 65 477,000 *Certified Capacity 40 50 psig psig 870,000 1,035,000 870,000 1,035,000 1,210,000 1,450,000 675,000 805,000 675,000 805,000 525,000 625,000 – – 587,000 697,000 587,000 697,000 75 psig 972,000 972,000 *National Board Capacity Certified – Btu Per Hour (90% of actual capacity at 10% accumulation) ASME boiler and pressure vessel code – Section IV – Heating Boilers 58 Customer Service 1-704-841-6000 Plumbing and Heating ASME Section IV Hot Water Relief Valves ASME SECTION IV HIGH CAPACITY RELIEF VALVES High-capacity heating system valves with female inlet, expanded or standard female outlet. Elevated seat for drainage of water away from seat area. Entire pressure range is National Board capacity certified. 10-600 SERIES DESCRIPTION • High Btu capacity rating • Silicone seat • Fabric reinforced molded diaphragm isolates spring from water at all times • Bronze body and spring cage Model Number 10-604 10-614 10-605 10-615 10-606 10-616 10-607 10-617 10-608 10-618 Size(in.) Inlet Outlet NPT NPT 3/4F 3/4F 3/4F 1F 1F 1F 1F 1-1/4F 1-1/4F 1-1/4F 1-1/4F 1-1/2F 1-1/2F 1-1/2F 1-1/2F 2F 2F 2F 2F 2-1/2F • Maximum temperature service 250°F • Registered in Canadian provinces and territories CRN #0G8547.5C • Protects against excessive water pressure due to failure of controls to regulate Btu input Pressure Range psig 15-160 15-160 15-160 15-160 15-160 15-160 15-160 15-160 15-160 15-160 Wt./100 (lbs.) 232 226 410 390 795 755 1100 1145 2375 2315 A 1.03 1.03 1.25 1.25 1.25 1.25 2.00 2.00 2.19 2.19 B Dimensions (in.) B C 5.25 1.62 5.25 1.72 6.69 2.00 6.69 2.00 8.37 2.47 8.37 2.47 10.75 2.75 10.75 2.75 14.00 3.69 14.00 3.66 A C Use Suffix No. to designate last two digits of Product No. for desired pressure. Other pressure settings available upon request. Pressure psig 30 50 75 100 125 150 Suffix Number -05 -10 -15 -20 -25 -34 3/4 x 3/4 10-604 827,000 1,209,000 1,686,000 2,162,000 2,639,000 3,116,000 1x1 10-605 1,339,000 1,956,000 2,728,000 3,500,000 4,272,000 5,044,000 1-1/4 x 1-1/4 10-606 2,316,000 3,384,000 4,720,000 6,055,000 7,390,000 8,725,000 1-1/2 x 1-1/2 10-607 3,151,000 4,604,000 6,421,000 8,238,000 10,054,000 11,871,000 2x2 10-608 5,193,000 7,589,000 10,583,000 13,577,000 16,571,000 19,565,000 Pressure psig 30 50 75 100 125 150 Suffix Number -05 -10 -15 -20 -25 -34 3/4 x 1 10-614 970,000 1,418,000 1,977,000 2,536,000 3,096,000 3,655,000 1 x 1-1/4 10-615 1,570,000 2,295,000 3,200,000 4,105,000 5,011,000 5,916,000 1-1/4 x 1-1/2 10-616 2,716,000 3,969,000 5,535,000 7,101,000 8,668,000 10,234,000 1-1/2 x 2 10-617 3,696,000 5,400,000 7,531,000 9,661,000 11,792,000 13,923,000 2 x 2-1/2 10-618 6,091,000 8,900,000 12,412,000 15,924,000 19,435,000 22,947,000 PRESSURE RELIEF VALVES 17 SERIES Prevents excessive thermal expansion buildup in plumbing systems, tank applications and tankless water heaters. Conforms to HUD/FHA requirements; ideal for well systems. DESCRIPTION • Bronze body, stainless steel spring • CSA certified design to ANSI Z21.22 “Relief Valves for Hot Water Supply Systems” Model Number 17-401 17-402 CSA Capacity Rating Size Wt./100 (BTU/Hr) (in.) (lbs.) 0.57 1/2 M x 1/2 F 15,000 3/4 M x 3/4 F 200,000 0.53 • ASME capacity certified from 75 to 150 psig* • CRN #0G8547.5C registered in all Canadian provinces and territories *ASME Certified Discharge Capacities BTU/HR. 75 100 125 150 505,000 648,000 791,000 934,000 Note: When ordering specify pressure by adding the two digit key number after the product number as follows: 75 psig - 01; 100 psig - 02; 125 psig - 03; 150 psig - 04; 160 psig - 05 * 3/4 model only: National Board Capacity Certified - BTU per hour (90% of actual capacity at 10% accumulation) ASME boiler and pressure vessel code - Section IV - Heating Boilers Customer Service 1-704-841-6000 59 Backflow Preventers Double Check Valve Assemblies 40-100-T2 SERIES BRONZE TOP ENTRY T2 DOUBLE CHECK VALVE ASSEMBLY Designed to protect against backflow from a cross-connection of non-health hazard pollutant. Within the assembly are two mechanically independent, spring-loaded poppet type check valves set in an integral cast bronze body. Both check valves are designed at an inclined angle upward from horizontal centerline of the assembly, and all test cocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in a pit or tight places. DESCRIPTION • Comes standard with Apollo® full port ball valves with stainless steel handles* • Maximum working pressure 175 psig • Temperature range 33°F-180°F • Top access for testing, repair and maintenance • Corrosion resistant • Low head loss • Interchangeable poppets and springs • Replaceable seats 40 - 1 X Y-STRAINER * 3/4"-1": Tee handles 1-1/4"-2": Lever handles X -T SIZE 0-Standard 4-3/4" 1-w/ Y-strainer (shipped loose) 5-1" 6-1-1/4" 7-1-1/2" 8-2" X NON UL CLASSIFIED 1-less ball valves 2-w/ball valves 4-w/union end ball valves FOR UL CLASSIFIED FP1-less ball valves FP2-w/ball valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Size (in.) A B C D E F G Test Cocks Net Weight Shipping Weight 60 3/4 14.25 7.25 4.31 1.62 2.44 5.44 0.81 1/8 x 1/4 NPT 8.80 10.10 Dimensions (in.) – Weights (lbs.) 1 1-1/4 1-1/2 2 20.75 21.37 23.12 14.75 7.25 12.37 12.37 12.37 6.12 6.12 6.12 4.31 1.87 2.19 2.62 3.00 2.44 3.81 3.81 3.81 6.37 6.37 6.37 5.44 0.81 1.37 1.37 1.37 1/8 x 1/4 NPT 1/4 x 1/4 NPT 1/4 x 1/4 NPT 1/4 x 1/4 NPT 9.50 23.20 25.70 31.50 10.80 25.90 28.80 35.50 Customer Service 1-704-841-6000 Backflow Preventers Double Check Valve Assemblies BRONZE TOP ENTRY TC2 DOUBLE CHECK VALVE ASSEMBLY 40-100-TC2 SERIES SAE threaded hose connections make certification testing fast and trouble-free. It is designed to protect against backflow from a cross-connection of non-health hazard pollutant. Within the assembly are two mechanically independent, spring-loaded poppet type check valves set in an integral cast bronze body. Both check valves are designed at an inclined angle upward from horizontal centerline of the assembly, and all test cocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in a pit or tight places. DESCRIPTION • Top access for testing, repair and maintenance • Corrosion resistant • Low head loss • Interchangeable poppets and springs • Replaceable seats 40 - 1 X • Comes standard with Apollo® full port ball valves with stainless steel handles* • Maximum working pressure 175 psig • Temperature range 33°F-180°F * 3/4"-1": Tee handles 1-1/4"-2": Lever handles X Y-STRAINER SIZE (in.) 0-Standard 1-w/ Y-strainer (shipped loose) 4 - 3/4 5-1 - TC2 FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Size (in.) A B C D E F G Test Cocks Net Wt. Shpg. Wt. Dimensions (in.) – Weights (lbs.) 3/4 13.00 7.25 4.25 1.69 2.44 5.62 1.19 1/8 x 1/4 SAE 8.87 10.12 Customer Service 1-704-841-6000 1 14.75 7.25 4.31 1.87 2.44 5.69 1.87 1/8 x 1/4 SAE 9.50 11.00 61 Backflow Preventors Double Check Valve Assemblies MODEL DC 4S BRONZE TOP ENTRY DOUBLE CHECK VALVE ASSEMBLIES The Conbraco Model DC Double Check Valve Backflow Preventer is designed to prevent backflow by either back-pressure or back-siphonage from a cross-connection between potable water lines and substances that are objectionable, but not a health hazard. It is an economical device that is easily repaired in the line. The device consists of two independently acting, spring-loaded poppet type check valves in an integral cast bronze body. Four test cocks and two shut-off valves which are quarter-turn, full-port, resilient-seated and ball type complete the assembly. DESCRIPTION • Comes standard with Apollo® full-port ball valves with stainless steel handles • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F • Corrosion resistant • Easy to install, repair and maintain • Low head loss • Replaceable check modules 4S - 1 X Y-STRAINER X -A X SIZE 0-Standard 3 - 1/2" 1-w/ Y-strainer (shipped loose) BALL VALVES 1 -less ball valves 2 -w/ ball valves 4 -w/ union end ball valves FLOW CURVES Dimensions (in.) – Weights (lbs.) Size (in.) A (w/o Ball Valves) B C D E F Net Wt. (w/o Ball Valves) Net Wt. (with Ball Valves) Shpg. Wt. (w/o Ball Valves) Shpg. Wt. (with Ball Valves) 62 Customer Service 1-704-841-6000 1/2 5.62 9.75 4.50 3.50 1.00 3.62 2.68 4.38 3.80 5.10 Backflow Preventors Double Check Valve Assemblies EPOXY COATED DUCTILE IRON TOP ENTRY DOUBLE CHECK VALVE ASSEMBLY MODEL DC 4S The Conbraco Model DC Double Check Valve Backflow Preventer is designed to control crossconnections between potable water lines and substances that are objectionable, but not a health hazard. It is an economical device that is easily repaired in the line. The device consists of two independently acting, spring-loaded swing type check valves in a corrosion resistant ductile iron body. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the check valve body and one on the inlet shut-off valve, complete the assembly. DESCRIPTION • Short lay length • Lightweight • Designed for easy maintenance • Check valve assemblies interchangeable • Maximum working pressure 175 psig • Operating temperature range 33°F-140°F • Patent # 5,711,341 • Corrosion resistant • Replaceable discs • Low head loss • Economical 4S - 1 X Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose) X -0 SIZE (in.) 9 - 2-1/2 0-3 A-4 C-6 X SIZES 2-1/2", 3", 4", 6" X VALVES 1 -less gate valves 2 -w/ NRS gate valves 3 -w/ OS&Y gate valves 5 -w/ Epoxy coated ball valves 6 -w/ OS&Y gate valve on inlet, NRS gate valve w/ post plate and nut on outlet 7-w/ Flanged inlet x Grooved outlet 8 -w/ Grooved x Grooved OS&Y gate valves FLOW U - U-Flow FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 2-1/2 3 33.12 32.12 A B 17.00 17.00 C NRS 14.87 16.12 C (OS&Y) OPEN 19.87 22.62 12.37 11.37 D NRS D (OS&Y) OPEN 16.37 18.87 10.37 09.62 E F 07.00 07.50 G 34.62 38.12 H 19.87 20.87 Net Wt. (Less Gate Valves) 58.00 60.00 Net Wt. (With NRS Valves) 153.00 186.00 Net Wt. (With OS&Y Valves) 164.00 194.00 Net Wt. (With NRS Valves & Elbows) 189.00 237.00 Net Wt. (With OS&Y Valves & Elbows) 200.00 245.00 136.00 126.00 Net Wt. (With Ball Valves) Net Wt. (With Post Indicator) 188.00 214.00 Shpg. Wt. (Less Gate Valves) 64.00 66.00 Shpg. Wt. (With NRS Valves) 221.00 254.00 261.00 231.00 Shpg. Wt. (With OS&Y Valves) 257.00 305.00 Shpg. Wt. (With NRS Valves & Elbows) Shpg. Wt. (With OS&Y Valves & Elbows) 267.00 312.00 Shpg. Wt. (With Ball Valves) 193.00 203.00 281.00 255.00 Shpg. Wt. (With Post Indicator) Customer Service 1-704-841-6000 4 34.62 16.50 19.25 27.25 14.75 22.75 11.87 09.00 39.62 22.87 68.00 254.00 266.00 339.00 351.00 184.00 281.00 74.00 324.00 338.00 409.00 423.00 254.00 353.00 6 39.12 18.00 24.50 35.62 19.00 30.12 14.62 11.00 46.12 26.12 80.00 376.00 392.00 511.00 527.00 388.00 404.00 086.00 484.00 502.00 619.00 637.00 498.00 514.00 2-1/2 " – 6" 63 Backflow Preventers Double Check Valve Assemblies EPOXY COATED DUCTILE IRON TOP ENTRY DOUBLE CHECK VALVE ASSEMBLY MODEL DC 4S The Conbraco Model DC Double Check Valve Backflow Preventer is designed to control crossconnections between potable water lines and substances that are objectionable, but not a health hazard. It is an economical device that is easily repaired in the line. The device consists of two independently acting, spring-loaded swing type check valves in a corrosion resistant ductile iron body. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the check valve body and one on the inlet shut-off valve, complete the assembly. DESCRIPTION Sizes 8", 10" • Lightweight • Short lay length • Designed for easy maintenance • Check valve assemblies interchangeable • Maximum working pressure 175 psig • Operating temperature range 33°F-140°F • Patent #6343618 • Replaceable discs • Corrosion resistant • Economical • Low head loss 4S - 1 X X -0 X X Y-STRAINER SIZE (in.) VALVES FLOW 0-Standard 1-w/ Y-strainer (shipped loose) E-8 G - 10 1 -less gate valves 2 -w/ NRS gate valves 3 -w/ OS&Y gate valves 5 -w/ Epoxy coated ball valves 6 -w/ OS&Y gate valve on inlet, NRS gate valve w/ post plate and nut on outlet 7-w/ Flanged inlet x Grooved outlet (OS&Y)* 8 -w/ Grooved x Grooved OS&Y gate valves* U - U-Flow *Gate valve options not available in 10" size. FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 8 A 50.12 27.00 B C NRS 22.50 37.75 C (OS&Y) OPEN D 17.00 E 13.50 F 45.12 35.00 G 3/4 NPT Test Cocks Net Wt. (Less Gate Valves) 420.00 Net Wt. (With NRS Valves) 856.00 Net Wt. (With OS&Y Valves) 920.00 Net Wt. (With NRS Valves & Elbows) 1085.00 Net Wt. (With OS&Y Valves & Elbows) 1148.00 Net Wt. (With Ball Valves) 1105.00 Net Wt. (With Post Indicator) 911.00 510.00 Shpg. Wt. (Less Gate Valves) Shpg. Wt. (With NRS Valves) 936.00 Shpg. Wt. (With OS&Y Valves) 1164.00 Shpg. Wt. (With NRS Valves & Elbows) 1026.00 Shpg. Wt. (With OS&Y Valves & Elbows) 1254.00 Shpg. Wt. (With Ball Valves) 1224.00 1017.00 Shpg. Wt. (With Post Indicator) 64 8" – 10" Customer Service 1-704-841-6000 10 55.62 29.50 26.50 45.75 19.50 16.00 51.62 38.25 3/4 NPT 470.00 1175.00 1320.00 1548.00 1693.00 N/A 1280.00 565.00 1265.00 1638.00 1420.00 1793.00 N/A 1390.00 Backflow Preventers Reduced Pressure Principle Devices 40-200-TC2 SERIES BRONZE REDUCED PRESSURE PRINCIPLE SAE threaded hose connections make certification testing fast and trouble-free, especially in tight installations. It is designed to give maximum protection against backflow caused by either backpressure or back-siphonage. The durable, but economical, device is easily maintained in the line without any special tools. It consists of two independently acting spring-loaded check valves with an automatic differential relief valve located between the check valves. The diaphragm and the sensing passage are built into the all bronze body to eliminate possible damage. DESCRIPTION • Maximum protection against backpressure/back-siphonage • Removable discs • Internal sensing passage • Designed for easy maintenance • Low head loss 40 - 2 X • Economical • Corrosion resistant • Comes standard with Apollo® Full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F • Replaceable seats X -TC2 Y-STRAINER SIZE (in.) 0-Standard 4 - 3/4 1-w/ Y-strainer (shipped loose) 5 - 1 FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 3/4 13.75 A B (w/o Ball Valves) 8.00 C 9.87 4.06 D E 4.62 F 5.12 Test Cocks 1/8x1/4 SAE Net Wt. (w/o Ball Valves) 11.50 Net Wt. (w/ Ball Valves) 14.00 12.50 Shpg. Wt. (w/o Ball Valves) Shpg. Wt. (w/ Ball Valves) 15.00 Customer Service 1-704-841-6000 1 15.37 8.00 9.87 4.06 4.62 5.12 1/8x1/4 SAE 11.00 14.50 12.00 15.50 65 Backflow Preventers Reduced Pressure Principle Devices BRONZE REDUCED PRESSURE PRINCIPLE 40-200-T2 SERIES Designed to give maximum protection against backflow caused by either back-pressure or back-siphonage. The durable, but economical, device is easily maintained in the line without any special tools. It consists of two independently acting spring-loaded check valves with an automatic differential relief valve located between the check valves. The diaphragm and the sensing passage are built into the all bronze body to eliminate possible damage. Three of the test cocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in tight places. DESCRIPTION • Corrosion resistant • Comes standard with Apollo® full port ball valves with stainless steel handles* • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F • Replaceable seats • Maximum protection against backpressure/back-siphonage • Removable discs • Internal sensing passage • Designed for easy maintenance • Low head loss • Economical * 3/4"-1": Tee handles 1-1/4"-2": Lever handles 40 - 2 X Y-STRAINER X -T SIZE (in.) 0-Standard 1-1/4 1-w/ Y-strainer (shipped loose) 2-3/8 3-1/2 4-3/4 5-1 6-1-1/4 7-1-1/2 8-2 X NON UL CLASSIFIED 1-less ball valves 2-w/ball valves 4-w/union end ball valves FOR UL CLASSIFIED (3/4"-2") FP1-Less ball valves FP2-w/ball valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Size (in.) 1/4 A 10.19 B (w/o Ball Valves) 5.75 C 6.87 D 2.62 E 3.12 F 3.75 1/8x1/4NPT Test Cocks Net Wt. (w/o Ball Valves) 5.70 Net Wt. (w/ Ball Valves) 7.00 Shpg. Wt. (w/o Ball Valves) 6.60 Shpg. Wt. (w/ Ball Valves) 7.90 66 Dimensions (in.) – Weights (lbs.) 3/8 1/2 3/4 1 1-1/4 1-1/2 2 10.25 10.75 13.75 15.37 17.50 19.50 21.50 5.75 5.75 8.00 8.00 11.00 11.00 11.00 6.87 6.87 9.75 9.75 12.62 12.62 12.62 2.62 2.62 4.06 4.06 5.37 5.37 5.37 3.12 3.12 4.50 4.50 5.69 5.69 5.69 3.75 3.75 5.12 5.12 7.12 7.12 7.12 1/8x1/4NPT 1/8x1/4NPT 1/8x1/4NPT 1/8x1/4NPT 1/4x1/4NPT 1/4x1/4NPT 1/4x1/4NPT 5.70 5.10 11.50 11.00 30.50 27.50 27.00 7.00 7.40 14.00 14.50 35.50 37.00 39.50 6.60 6.00 12.50 12.00 32.50 29.00 29.00 7.90 8.30 15.00 15.50 38.00 39.00 41.00 Customer Service 1-704-841-6000 Backflow Preventers Reduced Pressure Principle Devices STAINLESS STEEL : T2S REDUCED PRESSURE BACKFLOW PREVENTER 40-200-T2S SERIES Maximum protection against backflow caused by either back-pressure or back-siphonage from a cross-connection wherein a contaminant hazard exists (i.e. a health hazard), or a pollutant hazard exists (i.e. a non-hazard). The assembly is composed of two spring-loaded poppet type check valves and a mechanically independent, hydraulically dependent pressure differential relief valve set in an integral stainless steel body. Three of the test cocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in tight places. DESCRIPTION • Replaceable seats • Comes standard with Apollo® stainless steel full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Temperature range 33°F-180°F • Stainless steel body and covers • Easy to install and repair • Internal sensing passage • Low head loss • Removable seat discs 40 - 20 X -T2S SIZE (in.) For UL Classified 1-1/4 2-3/8 3-1/2 4-3/4 5-1 (3/4" AND 1") FP1S-less ball valves FP2S-w/ball valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 1/4 3/8 1/2 3/4 1 A 10.50 10.50 10.50 13.50 15.25 B 5.75 5.75 5.75 7.94 7.94 6.87 6.87 6.87 9.00 9.00 C D 2.62 2.62 2.62 4.06 4.06 4.37 4.37 3.19 3.19 3.19 E F 3.75 3.75 3.75 5.12 5.12 Test Cocks 1/8 x 1/4NPT 1/8 x 1/4NPT 1/8 x 1/4NPT 1/8 x 1/4NPT 1/8 x 1/4NPT 4.25 4.12 8.25 8.12 4.25 Net Wt. (w/o Ball Valves) Net Wt. (with Ball Valves) 5.50 5.50 5.37 10.75 11.00 Shpg. Wt. (w/o Ball Valves) 5.12 5.12 5.00 9.75 9.62 Shpg. Wt. (with Ball Valves) 6.37 6.37 6.25 12.25 12.75 Customer Service 1-704-841-6000 67 Backflow Preventers Reduced Pressure Principle Devices 40-200-TCU SERIES BRONZE TCU U FLOW REDUCED PRESSURE PRINCIPLE SAE threaded hose connections make certification testing fast and trouble-free, especially in tight installations. It is designed to give maximum protection against backflow caused by either back-pressure or back-siphonage. The durable, but economical, device is easily maintained in the line without any special tools. It consist of two independently acting spring-loaded check valves with an automatic differential relief valve located between the check valves. The diaphragm and the sensing passage are built into the all bronze body to eliminate possible damage. The assembly offers installation flexibility by providing inlet and outlet bronze elbows to meet space requirements, adaptability and lower installation cost. DESCRIPTION • Low head loss • Removable seat discs • Replaceable seats • Comes standard with Apollo® full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F • Maximum protection against back pressure/back-siphonage • Designed for easy maintenance • Economical • Compact • Internal sensing passage 40 - 20 X -TCU SIZE (in.) 4 - 3/4 5-1 FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) 3/4 Size (in.) A 10.50 B 8.00 4.12 C D 4.44 E 13.87 4.50 F G 5.12 Test Cocks 1/8 x 1/4 SAE Net Wt. (with Ball Valves) 14.70 Shipping Wt. (with Ball Valves) 15.70 68 Customer Service 1-704-841-6000 1 10.69 8.00 5.19 4.56 15.12 4.50 5.12 1/8 x 1/4 SAE 15.60 16.60 Backflow Preventers Reduced Pressure Principle Devices EPOXY COATED DUCTILE IRON REDUCED PRESSURE PRINCIPLE 40-200 SERIES The Conbraco Series 40-200 Reduced Pressure Backflow Preventer consists of two independently acting, spring-loaded check valves with a differential pressure relief valve located between the check valves. The all bronze relief valve module is easily removed from the ductile iron check valve body. Pressure sensing passages are built into the bronze relief valve module to prevent possible damage from mishandling or vandalism. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the backflow preventer valve body and one on the inlet shut-off valve, complete the assembly. DESCRIPTION • Low head loss • Economical • Corrosion resistant • Maximum working pressure 175 psig • Operating temperature range 33°F -140°F • Maximum protection against backpressure/back-siphonage • Removable bronze seats • Replaceable discs • Internal sensing passage • Designed for easy maintenance 40 - 2 X Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose) X SIZE (in.) 9 - 2-1/2 0-3 A-4 Sizes 2-1/2", 3", 4" -0 X VALVES 1-less gate valves 2-w/ NRS gate valves 3-w/OS&Y gate valves 5-w/Epoxy coated ball valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 2-1/2 3 4 A 37.06 38.06 46.75 22.06 28.50 22.06 B C NRS 20.87 21.87 25.19 33.19 28.37 25.87 C OS&Y (OPEN) D NRS 11.37 12.37 14.75 D OS&Y (OPEN) 16.37 18.87 22.75 9.50 10.44 9.50 E F 9.62 10.37 11.87 G 7.00 7.50 09.00 Test Cocks 1/2 x 1/2 NPT 1/2 x 1/2 NPT 1/2 x 1/2 NPT Net Wt. (Less Gate Valves) 120.00 122.00 196.00 252.00 388.00 219.00 Net Wt. (With NRS Valves) Net Wt. (With OS&Y Valves) 229.00 259.00 402.00 Net Wt. (With Ball Valves) 188.00 198.00 312.00 Shpg. Wt. (Less gate Valves) 184.00 186.00 260.00 283.00 316.00 452.00 Shpg. Wt. (With NRS Valves) Shpg. Wt. (With OS&Y Valves) 293.00 323.00 466.00 Shpg. Wt. (With Ball Valves) 252.00 262.00 376.00 Customer Service 1-704-841-6000 69 Backflow Preventers Reduced Pressure Principle Devices 40-200 SERIES EPOXY COATED DUCTILE IRON REDUCED PRESSURE PRINCIPLE Sizes 6", 8", 10" The Conbraco Series 40-200 Reduced Pressure Backflow Preventer consists of two independently acting, spring-loaded check valves with a differential pressure relief valve located between the check valves. The relief valve module is easily removed from the ductile iron check valve body. Pressure sensing passages are built into the relief valve module to prevent possible damage from mishandling or vandalism. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the backflow preventer valve body and one on the inlet shut-off valve, complete the assembly. DESCRIPTION • Designed for easy maintenance • Low head loss • Economical • Corrosion resistant • Maximum working pressure 175 psig • Operating temperature range 33°F-140°F • Maximum protection against backpressure/back-siphonage • Removable bronze seats • Replaceable discs • Internal sensing passage 40 - 2 X X Y-STRAINER SIZE (in.) 0-Standard C-6 1-w/ Y-strainer (shipped loose) E - 8 G - 10 -0X VALVES 1-less gate valves 2-w/ NRS gate valves 3-w/OS&Y gate valves 5-w/Epoxy coated ball valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 6 8 10 A 63.00 75.00 88.25 52.00 62.06 42.00 B C NRS 30.50 38.50 44.00 63.25 53.75 41.62 C OS&Y (OPEN) D NRS 19.00 22.50 26.50 30.12 37.75 45.75 D OS&Y (OPEN) 17.50 16.00 11.50 E F 14.62 16.75 19.25 G 11.00 13.50 16.00 Test Cocks 3/4 x 3/4 NPT 3/4 x 3/4 NPT 3/4 x 3/4 NPT 715.00 1443.00 430.00 Net Wt. (Less Gate Valves) Net Wt. (With NRS Valves) 736.00 1155.00 2148.00 Net Wt. (With OS&Y Valves) 754.00 1210.00 2286.00 Net Wt. (With Ball Valves) 666.00 N/A N/A Shpg. Wt. (Less gate Valves) 528.00 885.00 1613.00 2364.00 1335.00 872.00 Shpg. Wt. (With NRS Valves) Shpg. Wt. (With OS&Y Valves) 890.00 1390.00 2502.00 N/A N/A 836.00 Shpg. Wt. (With Ball Valves) 70 Customer Service 1-704-841-6000 Backflow Preventers Defender DCV Assemblies NEW APOLLO® DEFENDER™ BACKFLOW DEVICES 4D-100 SERIES Defender double check and reduced pressure assemblies give you short lay length, low head loss and the durability of stainless steel in a totally lead-free assembly. Available in sizes 2-1/2 through 6 inches, with flanged or grooved NRS/OS&Y gate valves, or butterfly valves. Get big protection in a small package against lead and unwanted backflow with the Apollo Defender. Note: U.S. Patent #6,443,184 B1 on stainless steel check assembly. (Other patents pending.) DESCRIPTION • Stainless steel relief valve on RPZ • Corrosion resistant • Replaceable silicone rubber seat discs • Maximum working pressure 175 psig • Operating temperature range 33-140˚F • ASSE 1015, CSAB64.5, UL and FM, ISO 9001:2000Certified. • LEAD FREE • Low head loss • Easy maintenance • Economical • Short lay length • Stainless steel checks 4D -10 X -0 SIZE (in.) 9 – 2 -1/2" 0 – 3" A – 4" C – 6" X X SHUT-OFF VALVES FLOW 1 - Less Shut-Off Valves U – U Flow 2 - W/Flanged NRS Gate Valves (with two elbows) 3 - W/Flanged OS&Y Gate Valves 7 - W/Flanged Inlet x Grooved Outlet (both OS&Y) 8 - W/Grooved x Grooved OS&Y Gate Valves 9 - W/Grooved x Grooved Butterfly Valves (supervisory switch) FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in) - Weights (lbs.) Size 2 1/2" 3" 33.375 33.875 A (Butterfly Valves) A (Gate Valves) 35.5 37.5 B 21.375 21.375 C (With Butterfly Valves) 10.625 10.625 C (OS&Y Valves Open) 17.0 19.0 D 6.5 6.5 6.5 E (center to edge w/out elbows) 6.5 F (w/Elbows & Butterfly Valves) 9.75 10.5 28.25 27.25 F (w/Elbows & OS&Y Vlvs OPEN) G 27.375 28.125 H “U” Flow (with Butterfly Valves) 20.375 21.125 22.875 21.875 H “U” Flow (with OS&Y Valves) I “Z” Flow (with Butterfly Valves) 19.5 21.0 I “Z” Flow (with OS&Y Valves) 22.5 24.5 1/2 NPT 1/2 NPT Test Cocks 99 100 Net Wt. (Less Gate Valves) Net Wt. (w/Butterfly Valves) 122 124 Net Wt. (w/OS&Y Valves) 209 239 136 Net Wt. (w/Elbows & Butterfly Vlvs) 131 Net Wt. (w/Elbows & OS&Y Valves) 218 252 164 163 Shpg. Wt. (Less Gate Valves) Shpg. Wt. (w/Butterfly Valves) 189 191 Shpg. Wt. (w/OS&Y Valves) 276 306 Shpg. Wt. (w/Elbows & Butter Vlvs) 198 203 Shpg. Wt. (w/Elbows & OS&Y Vlvs) 285 349 Customer Service 1-704-841-6000 4" 35.0 39.875 21.375 10.625 22.75 6.5 6.5 11.875 29.75 29.75 22.375 24.625 23.25 28.0 1/2 NPT 105 154 320 174 340 179 221 387 241 407 6" 38.5 45.625 24.5 13.0 30.125 7.5 7.75 13.75 34.25 35.5 26.5 30.0 27.0 34.0 3/4 NPT 188 251 511 288 549 286 359 619 396 657 71 Backflow Preventers Defender RPZ Assemblies NEW APOLLO® DEFENDER™ BACKFLOW DEVICES 4D-200 SERIES Defender double check and reduced pressure assemblies give you short lay length, low head loss and the durability of stainless steel in a totally lead-free assembly. Available in sizes 2-1/2 through 6 inches, with flanged or grooved NRS/OS&Y gate valves, or butterfly valves. Get big protection in a small package against lead and unwanted backflow with the Apollo Defender. DESCRIPTION Stainless steel relief valve on RPZ • Corrosion resistant • Replaceable silicone rubber seat discs • Maximum working pressure 175 psig • Operating temperature range 33-140˚F • ASSE 1013, CSAB64.4, UL and FM, ISO 9001:2000 Certified • LEAD FREE • Low head loss • Easy maintenance • Economical • Short lay length • Stainless steel checks X 4D - X 0 X - 0 X 1 - DCV 2 - RPZ SIZE (in.) 9 – 2 -1/2" 0 – 3" A – 4" C – 6" SHUT-OFF VALVES FLOW 1 - Less Shut-Off Valves U – U Flow 2 - W/Flanged NRS Gate Valves (with two elbows) 3 - W/Flanged OS&Y Gate Valves 7 - W/Flanged Inlet x Grooved Outlet (both OS&Y) 8 - W/Grooved x Grooved OS&Y Gate Valves 9 - W/Grooved x Grooved Butterfly Valves (supervisory switch) FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in) - Weights (lbs.) Size 2 1/2" 3" A (Butterfly Valves) 33.375 33.875 35.5 37.5 A (Gate Valves) 21.375 21.375 B C (With Butterfly Valves) 10.625 10.625 19.0 17.0 C (OS&Y Valves Open) D 10.75 10.75 E (center to edge w/out elbows) 6.5 6.5 10.5 9.75 F (w/Elbows & Butterfly Valves) F (w/Elbows & OS&Y Vlvs OPEN) 27.25 28.25 G 27.375 28.125 21.125 H “U” Flow (with Butterfly Valves) 20.375 H “U” Flow (with OS&Y Valves) 21.875 22.875 I “Z” Flow (with Butterfly Valves) 19.5 21.0 I “Z” Flow (with OS&Y Valves) 22.5 24.5 Test Cocks 1/2 NPT 1/2 NPT Net Wt. (Less Gate Valves) 109 110 134 132 Net Wt. (w/Butterfly Valves) Net Wt. (w/OS&Y Valves) 219 249 Net Wt. (w/Elbows & Butterfly Vlvs) 141 146 262 Net Wt. (w/Elbows & OS&Y Valves) 228 Shpg. Wt. (Less Gate Valves) 173 174 201 199 Shpg. Wt. (w/Butterfly Valves) Shpg. Wt. (w/OS&Y Valves) 286 316 Shpg. Wt. (w/Elbows & Butter Vlvs) 208 213 359 Shpg. Wt. (w/Elbows & OS&Y Vlvs) 295 72 Customer Service 1-704-841-6000 4" 35.0 39.875 21.375 10.625 22.75 10.75 6.5 11.875 29.75 29.75 22.375 24.625 23.25 28.0 1/2 NPT 115 154 320 174 340 179 221 387 241 407 6" 38.5 45.625 24.5 13.0 30.125 11.75 7.75 13.75 34.25 35.5 26.5 30.0 27.0 34.0 3/4 NPT 198 261 521 298 559 296 369 629 406 667 Backflow Preventers Dual Check Valves DUAL CHECK VALVE 4N-300 SERIES Economically prevents cross connections of non-potable low-hazard water into the potable drinking water system. Not testable. DESCRIPTION • Replaceable check modules • Available in standard and swivel types • Maximum working pressure 175 psi • Operating temperature range 33-180°F • Low head loss • Independently-acting check valves • Compact and lightweight • Corrosion resistant Ordering Numbers Description (in.) 3/8" FNPT X 3/8" FNPT 3/8" FNPT X 3/8" FNPT (Rough Chrome Finish) 1/2" FNPT X 1/2" FNPT 3/4" FNPT X 3/4" FNPT 3/4" Meter (1-11 1/2 NPSM) Swivel Inlet X 3/4" FNPT Outlet 1" FNPT X 1" FNPT Part Number 4N-3A2-2A 4N-3A2-2AC 4N-3A3-3A 4N-3A4-4A 4N-3S5-4A 4N-3A5-5A FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Size (in) 3/8, 1/2 3/4 3/4 Meter 1 Dimensions A B 3.32 1.88 4.41 2 2 5.35 4.55 2 Wt (lbs.) .70 1.40 1.65 1.40 Materials Specs Material Part Name Union Tail Piece Brass Brass Union Nut Seat, Spring Glass-filled Retainers, Poppets Noryl® (1/2") Unfilled Acetal Seat, Spring Retainers, Poppets (3/4", 1") Springs Stainless Steel O-Rings, Seat Discs BUNA-N (3/4", 1") EPDM (1/2") Bronze, ASTM B584 Body Customer Service 1-704-841-6000 73 Backflow Preventers Dual Check Valve 40-300 SERIES DUAL CHECK VALVE Prevents cross connections of non-potable, low hazard water into the potable drinking water system. In-line testable and maintainable. Compact and lightweight. DESCRIPTION • Approved under ASSE & CSA • Sizes: 1/2", 3/4", 1" • Working pressure to 175 psig • Many inlet/outlet connection combinations available 40 - 3 X INLET CONNECTION A – FNPT B – MNPT C – Female Meter Thread E – Male Meter Thread S – Female Meter Thread (Swivel) 2 – Female BSPP • Corrosion resistant • Independently acting check valves • Easy to install, maintain and repair • Operating temperature 33°F to 180°F X-X INLET & OUTLET SIZE (in.) 3 – 1/2 4 – 3/4 5–1 X OUTLET CONNECTION A – FNPT B – MNPT C – Female Meter Thread E – Male Meter Thread F – Female BSPP On meter threads order one size larger than meter size X TEST COCKS 1 – With Test Cocks 2 – With Test Cocks & Ball Valves 3 – With Test Cocks & Outlet Ball Valve 4 – With 4 Test Cocks & Inlet & Outlet Ball Valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) 1/2 3/4 Size (in.) 4.37 4.37 A B 3.50 3.50 C 1.50 1.50 D 1.69 1.69 Test Port Size 1/8 NPT 1/8 NPT 2.00 2.00 Unit Wt. (with plugs) Unit Wt. (with test cocks) 2.40 2.40 Unit Wt. (with T.C.’s & Ball Valves) 4.00 4.60 3.40 Unit Wt. (with T.C.’s & Outlet Ball Valve) 3.20 74 Customer Service 1-704-841-6000 1 4.37 3.50 1.50 1.69 1/8 NPT 2.10 2.50 6.40 4.40 Backflow Preventers Model CBBP CARBONATED BEVERAGE BACKFLOW PREVENTER 4C-100 SERIES The device consists of two independently acting check valves biased to a normally closed position. A normally open atmospheric port is located between the check valves. During backflow conditions, the port vents gases and/or liquids. Additionally, the CBBP is equipped with a 100 mesh integral strainer screen at the inlet. All wetted areas of the device are non-toxic, corrosion resistant, and approved for use with potable water. The CBBP is suitable for supply pressures to 150 psig and water temperatures from 33˚ to 130˚ F. DESCRIPTION • Compact design • Lowest head loss • Atmospheric vent provides indication of problems • Integral strainer for equipment protection • Repairable check assemblies • Non-metallic body for corrosion resistance • CSA Certified to NSF61 • UL Classified to NSF18 • ASSE 1022 and CSA approved 4C - 1 0 X - 0 1 SIZE (in.) 1 – 1/4 2 – 3/8 FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Customer Service 1-704-841-6000 75 Backflow Preventers Model SVB 4W-500 SERIES SPILL RESISTANT VACUUM BREAKERS The spill-resistant pressure vacuum breaker (SVB) is designed to prevent contamination of potable water due to back-siphonage and ideally suited for indoor and OEM applications supplied with continuous pressure. DESCRIPTION • Economical • Maximum working pressure 150 psig • Operating temperature range 33˚F-180˚F • Approved under ASSE 1056, CSA, and USC FCCC & HR • Corrosion resistant • In-line flow • Integral shut-off valves • Designed for easy maintenance • Low head loss 4W - 5 0 X - 0 2 SIZE (in.) 1 – 1/4 2 – 3/8 3 – 1/2 FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Size (in.) Test Cock Net Wt. Shipping Wt. 76 Dimensions (in.) – Weights (lbs.) 1/4 3/8 1/4 Flare 1/4 Flare 1.16 1.16 1.26 1.26 Customer Service 1-704-841-6000 1/2 1/4 Flare 1.16 1.26 Backflow Preventers Continuous Pressure Backflow Preventer CONTINUOUS PRESSURE BACKFLOW PREVENTER 40-400 SERIES Protects residential and commercial water supply lines from back-siphonage or back-pressure of non-potable substances. Suitable for hot or cold water service. Low head loss. DESCRIPTION • Economical • Durable • Easy to install, maintain and repair • Operating temperature: 33˚F to 210˚F • Approved under ASSE & CSA • Maximum working pressure: 175 psig • Independently acting check valves • Sizes 1/2" and 3/4" • Corrosion resistant 40 - 4 X INLET CONNECTION A – FNPT H – Solder joint 2 – Female BSPP X - X INLET AND OUTLET SIZE (in.) 3 – 1/2 4 – 3/4 X M OUTLET CONNECTION A – FNPT B – MNPT F – Female BSPP H – Solder joint FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. (• 1/2" = 10 GPM) Dimensions (in.) – Weights (lbs.) Size (in.) 1/2, 3/4 A 5.00 2.94 B C 2.62 Unit Weight 1.90 Customer Service 1-704-841-6000 77 Backflow Preventers Pressure Vacuum Breakers 4V-500 SERIES FREEZE RESISTANT VACUUM BREAKERS Protects and enhances the performance of irrigation systems in even the coldest conditions. Designed with plastic float and integral relief valve that vents automatically. Bottom test cock assures easy draining. DESCRIPTION • Replaceable check valve cartridge • Apollo® ball valves standard • 150 psig maximum working pressure • Comes standard with Apollo full port valves with stainless steel handles • Temperature range 33˚F to 180˚F • ASSE 1020, CSA B64.1.2 and USC FCCC & HR approved 4V - 5 0 X - 0 X SIZE (in.) 3 - 1/2 4 - 3/4 5-1 6 - 1-1/4 7 - 1-1/2 8-2 BALL VALVES 1-less ball valves 2-w/ ball valves 4-w/ union end ball valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 A 3.00 3.00 3.00 3.75 3.75 5.25 4.75 4.75 4.75 5.37 5.37 6.62 B (Less Ball Valves) C 6.37 7.12 7.50 8.75 9.25 10.25 D 7.12 7.62 8.37 10.62 10.87 12.12 E 4.62 5.12 5.87 7.37 7.37 7.12 5.37 5.37 5.37 6.87 7.25 8.62 F (Less Ball Valves) Test Cocks 1/8 x 1/4 NPT 1/8 x 1/4 NPT1/8 x 1/4 NPT 1/4 x 1/4 NPT 1/4 x 1/4 NPT1/4 x 1/4 NPT 8.80 4.30 4.30 2.20 2.20 2.20 Net Wt. (Less Ball Valves) Net. Wt. (With Ball Valves) 3.40 3.90 5.30 9.30 12.20 23.30 3.20 3.20 3.00 5.60 5.80 10.30 Shipping Wt. (Less Ball Valves) Shipping Wt. (With Ball Valves) 4.40 4.90 6.30 10.50 13.70 24.80 78 Customer Service 1-704-841-6000 Backflow Preventers Pressure Vacuum Breakers 4V-500-TC2 SERIES PRESSURE VACUUM BREAKERS SAE threaded hose connections make certification testing fast and trouble-free, especially in tight installations. It is designed to prevent contamination of the potable water supply due to back-siphonage. The PVB is ideally suited for continuous pressure, outdoor applications such as irrigation equipment, livestock watering systems, swimming pools, etc. The device consists of a unique one piece cap/float assembly and independently acting check valve, all attractively packaged in a rugged yet compact bronze body. All components are made of corrosion resistant materials, guaranteeing years of reliable service. DESCRIPTION • Removable integral check valve • One-piece cap/float assembly • Built-in freeze relief valve in cap/float assembly • Comes standard with Apollo® full port valves with stainless steel handles • Corrosion resistant construction • Maximum working pressure 150 psig • Operating temperature range 33°F-180°F • Easy maintenance 4V - 5 0 X - TC2 SIZE (in.) 4-3/4 5-1 FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) 3/4 Size (in.) A 3.00 B (less ball valve) 4.75 C 7.31 D 7.62 5.12 E F (less ball valves) 5.37 1/8 x 1/4 SAE Test Cocks Net Wt. (Less Ball Valves) 2.20 Net Wt. (With Ball Valves) 3.90 3.20 Shpg. Wt. (Less Ball Valves) Shpg. Wt. (With Ball Valves) 4.90 Customer Service 1-704-841-6000 1 3.00 4.75 8.06 8.37 5.87 5.37 1/8 x 1/4 SAE 2.00 5.30 3.00 6.30 79 Backflow Preventers Double Check Detector Assembly MODEL DCDA 4S DOUBLE CHECK DETECTOR ASSEMBLY The Conbraco Model DCDA Double Check Detector Assembly is designed to provide double check protection against cross-connection of non-potable (non-hazardous) water into the safe drinking water system; and at the same time offers precise monitoring capability to detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The unit consists of two independently acting, spring loaded check valves with inlet and outlet resilient wedge gate valves and a by-pass assembly consisting of a water meter, double check valve assembly with shut-off valves and test cocks. DESCRIPTION Sizes 2 1/2", 3", 4", 6" • • • • • • • • • • • US Patent 5,711,341 Corrosion Resistant Replaceable Discs Low Head Loss Economical Short Lay Length Light Weight Designed For Easy Maintenance Check Valve Assemblies Interchangeable Maximum Working Pressure 175 psi Operating Temperature Range 33˚F-140˚F 4S - 6 0 X - X SIZE (in.) 9 – 2-1/2 0–3 A–4 C–6 METER C — With meter in cubic feet E — With meter in gallons G — Less water meter X X GATE VALVES FLOW 1 — Less gate valves U – U-Flow 3 — With OS&Y gate valves 6 — With post indicator 7 — W/ Flanged inlet x Grooved outlet* 8 — w/Grooved x Grooved OS&Y gate valves* FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) 4 3 2-1/2 Size (in.) 34.62 33.12 32.12 A 16.50 17.00 17.00 B 22.75 18.87 16.37 C (OS&Y OPEN) 4.50 3.75 3.50 D 9.00 9.00 9.00 E 29.62 28.12 27.12 F 25.00 23.00 22.00 G 1/2 NPT 1/2 NPT 1/2 NPT Test Cocks (Mainline) 1/4 NPT 1/4 NPT 1/4 NPT Test Cocks (Bypass) 75.00 83.00 70.00 Net. Wt. (Less Gate Valves) 176.00 206.00 278.00 Net. Wt. (w/OS&Y Valves) Net. Wt. (w/Elbows & OS&Y Valves) 212.00 362.00 257.00 293.00 226.00 200.00 Net. Wt. (w/Post Indicator) 128.00 136.00 123.00 Shpg. Wt. (Less Gate Valves) 243.00 273.00 350.00 Shpg. Wt. (w/OS&Y Valves) Shpg. Wt. (w/Elbows & OS&Y Valves) 279.00 434.00 324.00 293.00 365.00 267.00 Shpg. Wt. (w/Post Indicator) 80 Customer Service 1-704-841-6000 6 39.12 18.00 30.12 5.50 9.00 34.12 29.00 3/4 NPT 1/4 NPT 92.00 404.00 539.00 416.00 145.00 514.00 649.00 526.00 Backflow Preventers Double Check Detector Assembly DOUBLE CHECK DETECTOR ASSEMBLY MODEL DCDA 4S The Conbraco Model DCDA Double Check Detector Assembly is designed to provide double check protection against cross-connection of non-potable (non-hazardous) water into the safe drinking water system; and at the same time offers precise monitoring capability to detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The unit consists of two independently acting, spring loaded check valves with inlet and outlet resilient wedge gate valves and a by-pass assembly consisting of a water meter, double check valve assembly with shut-off valves and test cocks. DESCRIPTION • • • • • • • • • • • US Patent #6,343,618 Corrosion Resistant Replaceable Discs Low Head Loss Economical Short Lay Length Light Weight Designed For Easy Maintenance Check Valve Assemblies Interchangeable Maximum Working Pressure 175 psi Operating Temperature Range 33˚F-140˚F 4S - 6 0 X - X SIZE (in.) E–8 G – 10 METER C — With meter in cubic feet E — With meter in gallons G — Less water meter X Sizes 8", 10" X FLOW GATE VALVES U – U-Flow 1 — Less gate valves 3 — With OS&Y gate valves 6 — With post indicator 7 — W/ Flanged inlet x Grooved outlet* 8 — w/Grooved x Grooved OS&Y gate valves* *Note: Gate Valve options 7 & 8 not available in 10" size. FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) 10 8 Size (in.) 55.62 50.12 A 27.00 29.50 B 22.50 26.50 C (NRS) 37.75 45.75 C (OS&Y OPEN) 6.75 8.00 D 10.75 10.75 E 45.12 51.50 F 34.75 39.50 G 10.12 11.50 H 3/4 NPT 3/4 NPT Test Cocks (Mainline) 1/4 NPT 1/4 NPT Test Cocks (Bypass) 440.00 490.00 Net. Wt. (Less Gate Valves) Net. Wt. (w/OS&Y Valves) 940.00 1340.00 Net. Wt. (w/Elbows & OS&Y Valves) 1169.00 1714.00 Net. Wt. (w/Post Indicator) 920.00 1277.00 Shpg. Wt. (Less Gate Valves) 530.00 585.00 Shpg. Wt. (w/OS&Y Valves) 1046.00 1440.00 Shpg. Wt. (w/Elbows & OS&Y Valves) 1275.00 1814.00 Shpg. Wt. (w/Post Indicator) 1026.00 1377.00 Customer Service 1-704-841-6000 81 Backflow Preventers Reduced Pressure Detector Assembly 40-700 SERIES REDUCED PRESSURE DETECTOR ASSEMBLY The Conbraco Series 40-700 Reduced Pressure Detector Assembly is designed to provide reduced pressure principle protection against cross-connections that present a health hazard, and at the same time detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The mainline unit consists of two independent spring-loaded, poppet type check valve assemblies with a diaphragm actuated and spring-loaded, relief valve assembly located between check valves. Two resilient wedge gate valves and four test cocks complete the mainline unit. The by-pass consists of an approved reduced pressure assembly, four test cocks, two shut-off valves and a water meter. DESCRIPTION Sizes 3", 4" • Internal sensing passage • Corrosion resistant • Easy in-line maintenance and testing • Maximum working pressure 175 psig • Operating temperature range 33°F-140°F • Maximum protection against back-pressure/back-siphonage • Removable bronze seats • Replaceable discs 40 - 7 0 X SIZE (in.) 0—3 A—4 - X METER C — With meter in cubic feet E — With meter in gallons G — Less water meter X GATE VALVES 1 — Less gate valves 3 — With OS&Y gate valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. 4" Dimensions (in.) – Weights (lbs.) Size (in.) 3 4 A 38.06 46.75 B 22.06 28.50 C (OS&Y) OPEN 18.87 22.75 4.50 3.75 D E (OS&Y) OPEN 28.37 33.19 F 9.25 10.50 4.50 3.75 G Test cocks (line) 1/2" NPT 1/2" NPT Test cocks (by-pass) 1/4" NPT 1/4" NPT Net Wt. (less gate valves) 145.00 217.00 282.00 423.00 Net Wt. (with 0S&Y valves) Shipping Wt. (less gate valves) 209.00 281.00 Shipping Wt. (with OS&Y valves) 487.00 346.00 82 Customer Service 1-704-841-6000 Backflow Preventers Reduced Pressure Detector Assembly 40-700 SERIES REDUCED PRESSURE DETECTOR ASSEMBLY The Conbraco Series 40-700 Reduced Pressure Detector Assembly is designed to provide reduced pressure principle protection against cross-connections that present a health hazard, and at the same time detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The mainline unit consists of two independent spring-loaded, poppet type check valve assemblies with a diaphragm actuated and spring-loaded assembly located between check valves. Two resilient wedge gate valves and four test cocks complete the mainline unit. The by-pass consists of an approved reduced pressure assembly, four test cocks, two shut-off valves and a water meter. DESCRIPTION Sizes 6", 8", 10" • Internal sensing passage • Corrosion resistant • Easy in-line maintenance and testing • Maximum working pressure 175 psig • Operating temperature range 33°F-140°F • Maximum protection against backpressure/back siphonage • Removable bronze seats • Replaceable discs 40 - 7 0 X SIZE (in.) C—6 E—8 G — 10 - X X METER C — With meter in cubic feet E — With meter in gallons G — Less water meter GATE VALVES 1 — Less gate valves 3 — With OS&Y gate valves FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Dimensions (in.) – Weights (lbs.) Size (in.) 6 8 A 63.00 75.00 52.00 42.00 B C (OS&Y) OPEN 30.12 37.75 D 5.50 6.75 53.75 41.62 E (OS&Y) OPEN F 13.25 14.75 G 5.50 6.75 Test cocks (line) 3/4 NPT 3/4 NPT 1/2 NPT 1/4 NPT Test cocks (by-pass) Net Wt. (less gate valves) 452.00 738.00 1233.00 776.00 Net Wt. (with 0S&Y valves) Shipping Wt. (less gate valves) 550.00 908.00 Shipping Wt. (with OS&Y valves) 912.00 1413.00 Customer Service 1-704-841-6000 10 88.25 62.06 45.75 8.00 63.25 17.50 8.00 3/4 NPT 1/4 NPT 1471.00 2314.00 1641.00 2530.00 83 Backflow Preventers Hose End Vacuum Breakers 38-300 SERIES 3/4" HOSE CONNECTION VACUUM BREAKERS The Conbraco Series 38-304 Hose Connection Vacuum Breakers are designed to prevent cross connection caused by back-siphonage. They consist of a single check with an atmospheric vacuum breaker vent. They feature a break-away set-screw for tamper-proof protection. They are not suitable for continuous pressure applications. DESCRIPTION • Meets ASSE & CSA standards; listed with IAPMO • Maximum working pressure 125 psig • Maximum temperature 180° F 38-304-CS Model Number 38-304-AS 38-304-CS 38-300 SERIES FINISH SATIN BRASS SATIN CHROME Wt./100 (lbs.) 16.8 16.8 3/4" HOSE CONNECTION VACUUM BREAKERS The Conbraco Series 38-304-02 Hose Connection Backflow Preventer is designed to prevent backflow due to back-siphonage or low head back-pressure. Each device consists of two independent checks, forced loaded in the closed position with an atmospheric vent between the checks. The device is threaded for hose connection at both the inlet and outlet with a break-away set screw on the inlet for tamper proof installations. These devices are not suitable for continuous pressure applications. 38-304-02 DESCRIPTION • Corrosion resistant body and checks • Low Head loss • Easy to install with break-away set screw • Protects against back siphonage and low-head back pressure FLOW CURVES 38-400 SERIES 3/4" ANTI-FREEZE HOSE CONNECTION VACUUM BREAKERS The Conbraco Series 38-404 anti-freeze hose connection vacuum breaker is especially designed to prevent back-siphonage on wall and yard hydrants. It features a break-away set-screw for tamper-proof protection and manual drain for protection against freezing conditions. It is not suitable for continuous pressure applications. DESCRIPTION • Meets ASSE & CSA standards; IAPMO listed • Maximum working pressure 125 psig • Maximum temperature 180°F 38-400-AS Model Number 38-404-AS 38-404-CS 84 FINISH SATIN BRASS SATIN CHROME Customer Service 1-704-841-6000 SLEEVE Plastic Plastic Wt./100 (lbs.) 37 37 Backflow Preventers Vacuum Breakers 38-100 SERIES ATMOSPHERIC TYPE VACUUM BREAKERS Economical protection against back-siphonage and low hazard cross connections. For hot and cold water service up to 212°F at 125 psig for 1"; and up to 180°F at 125 psig for 1/4" - 2". DESCRIPTION • Meets ASSE & CSA standards; listed with IAPMO • Finishes: Rough brass (-01); polished brass *(-04), rough chrome *(-03), or polished chrome *(-06) • Compact and lightweight • Heat resistant silicone seat disc • Easy to maintain and corrosion resistant • All Metal Enclosure FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. Pressure Loss (psi) Rate of flow Rate of flow Model Number 38-101 38-102 38-103 38-104 38-105 38-106 38-107 38-108 Size (in.) A .9062 1/4 3/8 .9062 1/2 1.0937 3/4 1.3125 1.75 1 2.00 1-1/4 1-1/2 2.00 2 2.12 B 2.375 2.375 2.5 3.0625 4.06 4.37 4.37 4.50 Customer Service 1-704-841-6000 Dimensions (in.) C D 1.8125 1.0312 1.0312 1.8125 1.1875 1.1875 1.4687 2.125 2.87 1.87 2.00 3.75 2.00 3.75 2.25 3.75 Wt/100 (lbs.) 50.9 47.7 54.7 79.7 174 316 289 369 85 Backflow Preventers Vacuum Breakers 38-200 SERIES ATMOSPHERIC TYPE VACUUM BREAKERS (FORGED BODY) Economical protection against back-siphonage and low hazard cross connections. For hot and cold water service up to 212°F at 125 psig for 1/4" - 3/4". DESCRIPTION • Compact and lightweight • Heat resistant silicone seat disc • Easy to maintain and corrosion resistant • Meets ASSE & CSA standards; listed with IAPMO • Finishes: Rough brass (-01); rough chrome *(-03), or polished chrome *(-06) FLOW CURVES (*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards. • • • • 38-201/202/203/204 Model Number Size (in.) 38-201 1/4 38-202 3/8 38-203 1/2 38-204 3/4 38-231 1/4 38-232 3/8 38-231/232 86 Customer Service 1-704-841-6000 A 1.09 1.09 1.28 1.47 0.75 0.87 B 2.31 2.31 2.62 3.00 2.22 2.22 C 1.03 1.03 1.28 1.47 1.44 1.75 Dimensions (in.) D Wt/100 (lbs.) 0.66 50.6 0.66 47.7 54.7 1.87 2.00 63.1 0.66 26.2 0.66 31.2 Backflow Preventers Vacuum Breakers 38-502 SERIES LABORATORY FAUCET VACUUM BREAKER Backflow protection for potable water using two independently acting soft-seated checks. Reversible inlet/outlet adapters make installation easy on lab faucets, community sinks, beauty salons and barber shops. A DESCRIPTION • Corrosion resistant • Forged brass body • Suitable for hot or cold water service up to 212°F and 125 psi • Rough brass, rough chrome or polished chrome finish • Easy to maintain • Compact and lightweight B FLOW CURVES Model Number 38-502-01 38-502-02 38-502-03 38-502-CP2 38-502-CP3 Inlet (in.) 3/8 MNPSM* 3/8 FNPT 3/8 FNPT 1/4 FNPT 3/8 FNPT Outlet (in.) 3/8 FNPT 3/8 FNPT 3/8 MNPSM 1/4 FNPT 3/8 FNPT Dimensions (in.) A B 2.33 1.24 2.34 1.24 2.33 1.24 2.34 1.24 2.34 1.24 *American National Standard straight pipe thread for free-fitting mechanical joints (male) Customer Service 1-704-841-6000 87 Backflow Preventers Vacuum Breakers 40-000 SERIES FREEZE PROTECTION VALVE The Conbraco Series 40-000 Freeze Protection Valves protect Apollo® Backflow Preventers from freezing when installed in accordance with manufacturer’s instructions. All internal parts of the Freeze Protection Valves are replaceable. DESCRIPTION • Installs easily on Conbraco® Backflow Preventers • Ease of repair with available repair kit • 175 psig maximum operating pressure • Corrosion resistant • 1/4" male pipe thread inlet port • Available with 1/8" male x 1/4" female Apollo® test cock • Discharge port accommodates 5/8" I.D. hose • Mechanical operating principle • Nominal start to open temperature of 35°F • Maximum temperature of 180°F • Compact design • Patented design • IAPMO listed 40 - 0 0 0 - F P V X OPTIONS 1 – w/1/8" NPT plug 2 – w/1/8" male x 1/4" female Apollo test cock R – Repair kit* for FPV1 and FPV2 * Repair kit includes: Thermal element, spring, spring guide, two O-rings (all internal parts) NET WEIGHT EACH : Dimensions (in.) - Weights (lbs.) Model 40-000-FPV1: .70 Model 40-000-FPV2: .77 88 Customer Service 1-704-841-6000 Backflow Preventers Backflow Preventer Accessories Test Kits DIFFERENTIAL PRESSURE GAUGE TEST KITS 40-200-TKU These are three valve test kits used for testing all DCV, RPZ, PVB & SVB backflow preventers. DESCRIPTION • Differential pressure type with a dual scale of 0-15 psig/0-100kPa differential pressure range with a +2% accuracy (full scale). 40-200-TK5U 40-200-TK5U This a five valve test kit used for testing all DCV, RPZ, PVB & SVB backflow preventers. The five valve test kit is similar to the three valve kit except it has an additional two valves that make it possible to bleed lines without disconnecting hoses. It also features a line pressure gauge in addition to the differential pressure gauge, a thermoplastic gauge body and adjustable nylon strap. DESCRIPTION • Differential pressure type with a dual scale of 0-15 psig/0-100kPa differential pressure range with a +2% accuracy (full scale). Model Number *40-200-TKU *40-200-TK5U Application ALL DCV, RPZ, PVB & SVB ALL DCV, RPZ, PVB & SVB WT./100 (lbs.) 780 650 * Thermoplastic gauge body Customer Service 1-704-841-6000 89 Backflow Preventers Backflow Preventer Accessories 40-200 & MODEL RP (4S-200) Backflow Preventers AIR GAP DRAIN For installation with Conbraco’s 40-200 and 4S-200 Series Reduced Pressure Principle backflow preventers. The Conbraco Air Gap Drain (AGD) is designed to funnel minor relief valve discharges, due to line pressure fluctuations and /or minor check valve fouling, into the drainage system. Drain piping is easily attached to the drain’s threaded bottom. Note: The AGD is NOT designed to collect the full discharge capacity of the relief valve. (40-200) Dimensions (in.) – Weights (lbs.) R.P. AGD 40 Series Model No. A 1/4", 3/8", 1/2" 40-200-XA 8-7/16 3/4" & 1" 40-200-X1 9-1/2 1-1/4" & 2" 40-200-X1 11-1/4 2-1/2" & 3" 40-200-X2 19 4" 40-200-X2 20 6" 40-200-X2 21 8" 40-200-X3 22-11/16 10" 40-200-X3 25-11/16 B 5 5-1/8 5-1/8 9-7/8 9-7/8 9-7/8 12-11/16 12-11/16 C 1" NPT 1" NPT 1" NPT 2" NPT 2" NPT 2" NPT 3" NPT 3" NPT Wt./100 230 340 340 1100 1100 1100 1245 1245 Dimensions (in.) – Weights (lbs.) AGD R.P. 4S Series Model No. A 2-1/2" - 4" 40-200-X1 13-11/16 14-5/8 40-200-X1 6" 8" & 10" 40-200-X2 23-3/4 B 5-1/8 5-1/8 9-13/16 C 1" NPT 1" NPT 2" NPT Wt./100 340 340 1100 (40-200) (4S-200) 90 Customer Service 1-704-841-6000 In-Line Check Valves In-Line Check Valves 61-100, 61-200 BALL CONE® CHECK VALVES Patented design (U.S. Pat. No. 4,172,465) with reinforced ball-cone check and stainless steel springs, these valves offer exceptional resistance to chemicals and corrosion. No radial alignment is needed. DESCRIPTION • 125 psig steam rating • Straight-through design minimizes velocity changes • 1/2" psi opening pressure • Bronze sizes from 1/4" to 3" • Tight shut-off with liquid media Bronze Bronze FNPT x FNPT MNPT x FNPT 61-101 61-201 61-102 61-202 61-103 61-203 61-104 61-204 61-105 61-205 61-106 61-206 61-107 61-207 61-108 61-208 61-109 61-100 - Size 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 Dimensions (in.) C A B 2.06 1.12 1.12 2.12 1.12 1.12 2.31 1.12 1.12 2.87 1.37 1.50 3.50 1.75 1.93 4.18 2.12 2.37 4.93 2.50 2.81 6.00 3.00 3.68 7.00 3.50 4.50 8.12 4.12 5.31 61 Series 62 Series Wt./100 Wt./100 38.0 38.3 38.0 37.3 38.0 36.3 75.0 76.6 145.0 145.0 275.0 237.5 394.0 381.3 630.0 636.0 1400.0 1665.0 - Pressure Temperature Ratings Degree (F) PSIG -20 to 100 400 200 200 250 160 150 275 300 140 325 130 125 353 Precautionary Note Not recommended for use with reciprocating pumps and similar applications which may induce repetitious vibrations. Low flow rates which do not fully open the valve, may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc. Customer Service 1-704-841-6000 91 In-Line Check Valves In-Line Check Valves 62-100 SERIES STAINLESS STEEL BALL CONE® CHECK VALVES The 62-100 Series is uniquely suited for applications in corrosive environments, including chemical processing, pulp and paper and other process industries. The rugged stainless steel body and RPTFE ball check provide reliable, patented protection against reverse flow. DESCRIPTION • • • • • Female x Female Threaded 1/4" through 2" Unique (U.S. Patent # 4,172,465) design Longer life in severe environments Spring-loaded for fast seating action 125 psig saturated steam Model Number 62-101-01 62-102-01 62-103-01 62-104-01 62-105-01 62-106-01 62-107-01 62-108-01 61-500 & 62-500 SERIES Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 2.06 2.12 2.31 2.87 3.50 4.18 4.93 6.00 • Center guided so that radial alignment is never needed • Straight-through flow minimizes velocity change • Rated 400 psig WOG, cold non-shock Dimensions (in.) B 1.12 1.12 1.12 1.37 1.75 2.12 2.50 3.00 C 1.12 1.12 1.12 1.50 1.93 2.37 2.81 3.68 Wt./100 (lbs.) 38 38 38 75 145 237 381 636 SOFT SEAT CHECK VALVES Fabricated with stainless steel springs and elastomeric seats for tighter shut-off. No radial alignment is needed. Exceptional resistance to chemicals and corrosion. Spring is fully shielded from flow. DESCRIPTION • Straight-through design minimizes velocity changes • NPT threaded; 400 psig WOG • Retainer is notched for easy identification • Approximate opening pressure 1/2 psi • Female NPT sizes: 1/4" to 2" • Stainless steel sizes: 1/4" to 1" • Bubble-tight shut-off, ideally suited for gaseous service Bronze FNPT x FNPT 61-501 61-502 61-503 61-504 61-505 61-506 61-507 61-508 SS Ball Cone FNPT x FNPT 62-501 62-502 62-503 62-504 62-505 – – – Size(in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Dimensions (in.) A B C 2.312 1.125 1.125 1.125 1.125 2.312 2.312 1.125 1.125 2.875 1.375 1.500 3.500 1.750 1.937 4.187 2.125 2.375 2.812 2.500 4.937 6.000 3.000 3.687 61 Series Wt./100 38 38 38 75 145 275 394 630 62 Series Wt./100 38 38 38 75 150 – – – Precautionary Note Not recommended for use with reciprocating pumps and similar applications which may induce repetitious vibrations. Low flow rates which do not fully open the valve may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc. 92 Customer Service 1-704-841-6000 In-Line Check Valves In-Line Check Valves 61-600 SERIES SOLDER END SOFT SEAT CHECK VALVES All bronze with stainless steel springs and elastomeric seats for tighter shut-off. No radial alignment is needed. Exceptional resistance to corrosion. Spring fully shielded from flow. DESCRIPTION • Solder end; 400 psig WOG • Approximate opening pressure 1/2 psi • Retainer is notched for easy identification • Sizes: 1/2" to 2" • Bubble-tight shut-off, ideally suited for gaseous service • Straight-through design minimizes velocity changes Model Number 61-603 61-604 61-605 61-606 61-607 61-608 Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 C B A Dimensions (in.) A B C 2.75 1.12 1.25 3.68 1.20 1.62 4.50 1.93 2.12 6.11 2.13 2.38 6.87 2.50 2.81 7.46 3.38 3.75 Wt./100 (lbs.) 138 175 145 330 610 1010 61-700 SERIES BRASS NPT “MINI” CHECK VALVES Ideally suited for all OEM applications where space is a premium. Excellent for use on water and air. They feature a bubble-tight soft seat design with a very light loaded stainless steel spring. Model Number 61-701-01 61-702-01 61-703-01 61-704-01 61-705-01 Size (in.) 1/4 3/8 1/2 3/4 1 A 1.72 1.79 2.02 2.50 2.95 Dimensions (in.) B 0.81 0.93 1.06 1.25 1.62 C 0.92 1.05 1.17 1.40 1.76 Wt./100 (lbs.) 22 29 38 54 110 C A Precautionary Note Not recommended for use with reciprocating pumps and similar applications which may induce repetitious vibrations. Low flow rates which do not fully open the valve may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc. Customer Service 1-704-841-6000 B 93 Pipeline Strainers Pipeline Strainers 59 SERIES BRONZE NPT “Y” STRAINERS A B DESCRIPTION • • • • • • • Sizes: 1/8" to 4" Self-aligning screen makes cleaning easy Small sizes ideal for O.E.M. applications Rated 400 psig at 150°F WOG Optional tapped caps available (less plug) Optional mesh screens available upon request Sizes 1/8" to 1/2" available as UL® recognized component (Made from 85-5-5-5 bronze) Lightweight, compact protection against foreign particles. Corrosion-resistant bronze body and stainless steel screens. Operating pressures to 400 psig. Model Number 59-000-01 59-001-01 59-002-01 59-003-01 59-004-01 59-005-01 59-006-01 59-007-01 59-008-01 59-009-01 59-010-01 59-011-01 59-UL0-01 59-UL1-01 59-UL2-01 59-UL3-01 Size (in.) 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 1/8 1/4 3/8 1/2 Dimensions (in.) A B (Suffix-02) 2.00 1.25 1/8 NPT 2.00 1.25 1/8 NPT 2.69 2.00 1/4 NPT 2.69 2.00 1/4 NPT 3.87 3.25 1/2 NPT 4.75 4.00 3/4 NPT 5.12 4.25 3/4 NPT 5.75 5.00 1 NPT 6.75 6.00 1-1/4 NPT 7.94 5.87 1-1/4 NPT 9.12 6.87 1-1/2 NPT 11.94 10.12 1-1/2 NPT 2.00 1.25 1/8 NPT 2.00 1.75 1/8 NPT 2.69 2.00 1/4 NPT 2.69 2.00 1/4 NPT Screen Area (in.2) 1.38 1.38 3.19 3.19 8.18 12.9 16.2 22.8 32.7 47.3 64.8 115.0 1.38 1.38 3.19 3.19 Note: Dimensions shown are subject to change. Standard Screen Screen Size (in.) Opening 1/8 to 1/2 50 Mesh 3/4 to 3 20 Mesh 4 .125 Perforation 59-300 Series Wt./100 44.5 42.5 78.6 75.1 174.0 276.0 358.0 541.0 747.0 1130.0 1580.0 3070.0 44.5 42.5 78.6 75.1 Suffix -E1 -A1 -B1 -C1 -H1 Screen Options 20 MESH 40 MESH 60 MESH 80 MESH 100 MESH Suffix Option -02 Tapped Cap -P2 Tapped Cap with Plug -06 Strainer/Ball Valve Combination -03 Monel Screen BRONZE SWEAT END “Y” STRAINERS Designed with minimal wall thickness at solder ends to allow high strength joints. Lightweight and compact with corrosion-resistant bronze bodies, stainless steel screens. A DESCRIPTION • Operating pressures to 400 psig at 150˚F WOG • Sizes: 1/2" to 2" B Model Number 59-303-01 59-303-P2 59-304-01 59-304-P2 59-305-01 59-305-P2 59-306-01 59-306-P2 59-307-01 59-307-P2 59-308-01 59-308-P2 Standard Screen Size (in.) 1/2 3/4 to 2 94 Size (in.) 1/2 1/2 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 2 • Optional tapped caps available (less plug) Dimensions (in.) Tapped Cap Screen Area A B (Suffix-02) Wt./100 (in.2) 1.81 1/4 NPT 50 3.19 2.75 1/4 NPT 50 8.18 121 1/2 NPT 2.87 4.00 1/2 NPT 121 4.75 3.56 3/4 NPT 189 12.90 189 3/4 NPT 5.25 3.94 3/4 NPT 280 16.20 3/4 NPT 280 6.00 4.62 1 NPT 426 22.80 426 1 NPT 7.25 5.00 1-1/4 NPT 627 32.70 627 1-1/4 NPT Screen Opening 50 Mesh 20 Mesh Customer Service 1-704-841-6000 Suffix -01 -02 -P2 Option Solid cap (standard) Tapped Cap Tapped cap with pipe plug Pipeline Strainers Pipeline Strainers “MINI” STRAINER The body of the 59-V is corrosion-resistant solid cast bronze, ASTM B-584. The removable clean-out cap is solid brass bar stock, ASTM B-16. Standard screens are made of 304 stainless steel, and are 50 mesh. 59V SERIES A DESCRIPTION • 50 mesh screen standard, optional 80 (-C1) or 100 (-H1) mesh • U&L WORKING PRESSURE (non-shock): 400 psig @ 210˚F WOG 125 psig @ 400˚F WSP Model Number 59V-000-01 59V-001-01 Size (in.) 1/8 1/4 • Cv Factors 1/8" 1.03 GPM 1/4" 1.42 GPM • Sizes: 1/8" and 1/4" NPT Dimensions (in.) A B 1.75 1.25 2.00 1.31 B Wt./100 (lbs.) 25.0 29.7 539 SERIES CLASS 150 & 300 FLANGED CAST BRONZE “Y” STRAINERS Ideal for most standard industrial applications. Use to protect meters, nozzles, heat exchangers, condensers or other process equipment against debris. DESCRIPTION • Working Pressure (non-shock) 539-15 - Class 150 150 psig @ 406°F. Steam 225 psig @ 150°F. Water, Oil, Gas 539-30 - Class 300 300 psig @ 422° F. Steam 500 psig @ 150° F. Water, Oil, Gas • Self Cleaning • Self Aligning Screens (304SS Standard) Size (in.) 2 2-1/2 3 4 5 6 8 Dimensions (in.) B Class 150 Class 300 9.50 10.12 6.25 11.25 11.75 7.12 12.37 13.00 8.37 14.50 15.50 10.00 16.87 17.50 12.25 19.12 19.87 14.00 24.25 25.12 17.00 A Part Numbers CL300 (Liquid) CL150 (Liquid) 2" 603358LI 2" 603258LI 2-1/2" 603359LI 2-1/2" 603259LI 3" 603350LI 3" 603250LI 4" 60335ANI 4" 60325ANI 5" 60335BNI 5" 60325BNI 6" 60335CNI 6" 60325CNI 8" 60335ENI 8" 60325ENI Blow-Off NPT 1 1-1/4 1-1/2 1-1/2 2 2 2 Screen Area (in.2) 46.0 58.3 74.5 118.7 189.0 270.0 425.0 Weight/lbs. Class 150 Class 300 30 33 50 55 61 71 91 113 146 178 180 212 370 410 TCG SERIES Apollo® International CAST IRON PIPE THREADED Y-STRAINER Install these hardworking strainers upstream in almost any application to protect valves, regulators, solenoids and meters from rust, dirt and pipe scale. DESCRIPTION • 20 mesh screens standard to 2"; .045 perf 2-1/2" to 3", others available • Graphite gasketed blowoff plug for easy clean-out • Sizes: 1/4" to 3" DImensions (in.) Model Number Size (in.) A B 612-011-A1 1/4 3.19 2.37 612-012-A1 3/8 3.19 2.37 612-013-A1 1/2 3.19 2.37 3.75 3.37 612-014-A1 3/4 612-015-A1 1 4.00 3.50 612-016-A1 1-1/4 5.00 4.12 5.75 4.69 612-017-A1 1-1/2 612-018-A1 2 7.00 5.44 612-019-L1 2-1/2 4.25 5.68 612-010-L1 3 10.00 7.00 Customer Service 1-704-841-6000 Blow-off NPT 1/4 1/4 1/4 3/8 1/2 3/4 3/4 1 1 1 Wt./100 Screen (lbs.) Area (in.2) 1.25 2.8 1.25 2.8 1.50 2.8 2.25 4.7 3.00 7.0 5.25 12.1 6.50 16.4 11.13 23.1 23.50 55.0 33.00 78.4 95 Pipeline Strainers Pipeline Strainers FC1 &FC2 SERIES Apollo® International CAST IRON PIPE FLANGED Y-STRAINERS Same great features as the Model TCG but with flanged connections. DESCRIPTION • Model FC1-Class 125: -Sizes 1-1/2" -12"; 125 psig @ 450˚F. Steam; 200 psig @ 150˚F. Water, Oil, Gas -Sizes 14" -18"; 125 psig @ 250˚F. Steam; 150 psig @ 150˚F. Water, Oil, Gas • Model FC2-Class 250: -Sizes 1-1/2" -12"; 250 psig @ 450˚F. Steam; 500 psig @ 150˚F. Water, Oil, Gas -Sizes 14" -18"; 250 psig @ 275˚F. Steam; 300 psig @ 150˚F. Water, Oil, Gas Part Numbers FC1-125 (Liquid) 1-1/2" 613217L1 8" 61321ENI 1-1/2" 2" 613218L 10" 61321GNI 2" 2-1/2" 613219L 12" 61321HNI 2-1/2" 3" 613219L 14" 61321JNI 3" 4" 61321ANI 16" 61321KNI 4" 5" 61321BNI 18" 61321LPI 5" 6" 6" 61321CNI A (in.) B (in.) Size (in.) Class 125 Class 250 Class 125 Class 250 Blow-Off Size (in.) Flanged Flanged Flanged Flanged Plug 1-1/2 9.50 9.50 5.44 5.44 3/4 2 9.50 11.62 6.50 6.12 1 2-1/2 10.50 13.00 7.00 6.75 1-1/4 3 12.00 14.00 8.00 8.00 1-1/4 4 14.87 17.06 10.75 10.75 1-1/4 5 17.37 19.06 13.50 13.50 1-1/2 6 21.00 21.06 16.25 16.25 1-1/2 8 22.50 23.00 17.00 19.50 2 10 26.12 28.00 20.25 21.25 2-1/2 12 30.37 32.62 24.00 25.00 2-1/2 14 36.00 37.62 29.00 29.50 2 38.94 33.00 33.50 2-1/2 37.00 16 18 46.00 47.62 35.50 36.50 3 * Note: Dimensions shown are subject to change. 96 Customer Service 1-704-841-6000 FC1-250 (Liquid) 613317L1 8" 61331ENI 613318L 10" 61331GNI 613319LI 12" 61331HNI 613310LI 14" 61331JNI 61331ANI 16" 61331KNI 61331BNI 18" 61331LPI 61331CNI Weight lbs. Class 125 Class 250 Flanged Flanged 16 22 24 28 33 38 44 54 85 110 117 160 174 224 262 468 410 590 604 890 815 1080 1224 1800 1990 2380 Screen Area (in.2) 23.2 34.5 47.3 64.8 127.2 198.7 286.0 327.5 550.0 759.0 1052.0 1406.0 1772.0 Water Gauges Water Gauges & Accessories 20-100 & 20-150 SERIES STANDARD PATTERN BRONZE WATER GAUGES Use for all types of liquid level verification; available with 3/8" or 1/2" NPT male pipe connections. Aluminum or plastic composition hand wheels; EPDM gauge glass gaskets standard. Other glass gaskets available. DESCRIPTION • Ball checks standard on 20-150 models • Equipped with two copper guard rods • Standard 1/4" needle drain valve in lower arm Model Number 20-101 20-102 20-104 20-105 20-150 20-151 Pipe Size (in.) 3/8 3/8 1/2 1/2 1/2 1/2 Glass O.D. & Length 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 • Rated: 125 psig @ 350°F, 300 psig @ 100°F (See note!) • CRN Registered Wt./100 (lbs.) 145 145 160 160 160 160 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. HEAVY PATTERN BRONZE WATER GAUGES 20-200, 20-250 & 25-200 SERIES All standard 20 Series features but with a heavier valve body pattern for higher service ratings. DESCRIPTION • Available with 3/8", 1/2" and 3/4" MNPT fittings • Ball checks standard on 20-250 models • Polished finish on 25-200 valves Model Number 20-201 20-202 20-204 20-205 20-207 20-208 20-250 20-251 20-253 20-254 25-201 25-202 25-204 25-205 25-207 25-208 Pipe Size (in.) 3/8 3/8 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 3/8 3/8 1/2 1/2 3/4 3/4 Glass O.D. & Length 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 • Rated: 200 psig @ 400°F, 400 psig @ 100°F (See note!) • CRN Registered Wt./100 (lbs.) 185 189 205 205 270 270 195 200 355 360 180 185 190 190 290 295 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. Customer Service 1-704-841-6000 97 Water Gauges Water Gauges & Accessories 20-300, 20-350, 25-400 & 25-500 SERIES SQUARE PATTERN BRONZE WATER GAUGES Available with 1/2" (ASTM B-16 brass bar stock) or 3/4" (B-584 cast bronze) NPT male pipe connections. Four guard rods and EPDM gauge glass gaskets standard. Other glass gaskets available. DESCRIPTION • Standard 1/4" needle drain valve in lower arm • Pet cock or Apollo® ball valve drain on request • Polished finish on 25-400 and 25-500 • Ball checks standard on 20-350 and 25-500 Model Number 20-304 20-305 20-307 20-308 20-350 20-351 20-353 20-354 25-404 25-405 25-407 25-408 25-501 25-502 25-504 25-505 Pipe Size (in.) 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 Glass O.D. & Length 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 • Rated: 200 psig @ 400°F, 400 psig @ 100°F except for 25-400 (See note!) • 25-400 Rated=125 psig@350°F, 300 psig@100°F (See note!) • CRN Registered Wt./100 (lbs.) 260 270 345 365 265 265 360 365 285 285 350 350 290 290 355 355 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. 20-400 & 20-410 SERIES SIDE MOUNTED HANDWHEEL WATER GAUGES Side-mounted handwheels allow water gauge operation in hard-to-reach places; with all the 20 Series design features. DESCRIPTION • Ideal for concealed jacketed type boilers • No guard rod brackets: 20-405, 20-406, 20-410 • Brackets and guard rods standard: 20-407, 20-408 • EPDM standard gauge glass gasket Model Pipe Number Size (in.) 20-405-00 RH 1/2 20-406-00 LH 1/2 20-407-00 RH 1/2 20-408-00 LH 1/2 20-410-00 LH 1/2 Glass O.D. & Length 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 • Compact - requires minimum space • Standard 1/4" needle drain valve • Rated: 125 psig @ 350°F, 300 psig @ 100°F (See note!) • 1-1/4'' Extended shank length; 20-410 • CRN Registered Wt./100 (lbs.) 165 165 170 170 180 Wheel Type ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. 98 Customer Service 1-704-841-6000 Water Gauges Water Gauges & Accessories 20-700 & 20-710 SERIES SIMPLE EXPANSION TANK GAUGES Available with 3/8" or 1/2" MNPT connections; EPDM gauge glass gaskets and 1/4" needle drain valve in lower arm are both standard. DESCRIPTION • Ball checks on request (20-704 only) • Rated: 125 psig @ 350°F, 300 psig @ 100°F (See note!) • CRN Registered • 20-710 has plug in top arm to insert glass straight through • 1/4" pet cock or Apollo® ball valve optional Model Number 20-703-00 20-704-00 20-713-00 20-714-00 Pipe Size (in.) 3/8 1/2 3/8 1/2 Glass O.D. & Length 5/8 x 10 5/8 x 12 5/8 x 10 5/8 x 12 Wt./100 (lbs.) 120 135 120 135 Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. 23-600 SERIES STAINLESS STEEL EXPANSION TANK GAUGES Holds all 316 stainless steel-compatible liquids. In lower arm: shut-off valve and stainless steel drain valve. DESCRIPTION • Two stainless steel guard rods • Rated: 250 psig at 406°F: maximum working pressure (See note!) Model Number 23-651-00 23-654-00 Pipe Size (in.) 1/2 3/4 Glass O.D. & Length 5/8 x 12 5/8 x 12 • Standard PTFE reinforced gauge glass gaskets • High pressure glass standard • CRN Registered Wt./100 (lbs.) 225 225 Wheel Type ALUMINUM COMPOSITION Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. Customer Service 1-704-841-6000 99 Water Gauges Water Gauges & Accessories 20-600 & 20-800 SERIES BRONZE EXPANSION TANK GAUGES Bottom arm shut-off valve prevents water leaks during gauge glass changes. DESCRIPTION • EPDM standard gauge glass gasket • 20-800 models: 1/4" NPT pipe thread in upper arm for pressure gauge standard • Rated: 200 psig @ 400°F, 400 psig @ 100°F (See note!) • CRN Registered Model Number 20-604-00* 20-605-00* 20-804-00* 20-805-00* Pipe Size (in.) 1/2 1/2 1/2 1/2 Glass O.D. & Length 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 Wt./100 (lbs.) 155 175 160 160 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION *Automatic model Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. 24-600 & 24-650 SERIES CHAIN LEVER WATER GAUGES Lever on standard 12-foot chain allows operator to open and close valves that would be beyond reach. Valve stems operate on quarter-turns. DESCRIPTION • Rated 250 psig @ 400°F, 500 psig @ 100°F (See note!) • Use on large boilers with inconvenient columns • Automatic and non-automatic models Model Number 24-601-00 24-602-00 24-651-00* 24-652-00* Pipe Size (in.) 1/2 3/4 1/2 3/4 • Furnished with 12 feet of chain and 5/16" diameter full-blow valve with safety handle • High pressure glass standard with the 24 series • CRN Registered • Standard PTFE reinforced gauge glass gasket Glass O.D. & Length 5/8 x 12 3/4 x 16 5/8 x 12 3/4 x 16 Wt./100 (lbs.) 515 580 515 580 * Automatic model Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. 100 Customer Service 1-704-841-6000 Water Gauges Water Gauges & Accessories CHAIN LEVER WATER GAUGES 20-600 & 25-600 SERIES Lever on standard 12-foot chain allows operator to open and close valves that would be beyond reach. Valve stems operate on quarter-turns. DESCRIPTION • • • • • • • Quick opening, non-automatic Service rating: 250 psig @ 400°F, 500 psig @ 100°F (See note!) EPDM standard gauge glass gasket Standard 1/4" needle drain valve Furnished with 12 feet of chain H-2485 pull handle available CRN Registered Model Number 25-601-00* 25-602-00* 20-601-00** 20-602-00** Pipe Size (in.) 1/2 3/4 1/2 3/4 Glass O.D. & Length 5/8 x 12 3/4 x 16 5/8 x 12 3/4 x 16 Wt./100 (lbs.) 335 350 370 435 * Polished Finish Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. ** Ball valve not included. Includes 1/4" needle drain. BRONZE LIQUID LEVEL GAUGES 24-300 & 24-350 SERIES Automatic and non-automatic direct reading gauges in shank pipe sizes 1/2" and 3/4". DESCRIPTION • Automatic - conforms to ASME power boiler code requirements for automatic water gauges; ball checks in upper and lower arms • High pressure gauge glass and gaskets are standard • CRN Registered • Heavy pattern bronze valve body • Guard rod bracket to accommodate four guard rods • PTFE reinforced gauge glass gasket and stem packing are standard • Rated 250 psig @ 400°F, 500 psig @ 100°F (See note!) NonAutomatic Automatic Model Number 24-301-00 24-302-00 24-304-00 24-305-00 Pipe Size (in.) 1/2 1/2 3/4 3/4 Glass O.D. & Length 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 Wt./100 (lbs.) 425 425 490 490 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION 24-350-00 24-351-00 24-353-00 24-354-00 1/2 1/2 3/4 3/4 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 425 425 490 490 ALUMINUM COMPOSITION ALUMINUM COMPOSITION Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. Customer Service 1-704-841-6000 101 Water Gauges Water Gauges & Accessories 21 SERIES ROUGH BRONZE WATER GAUGES WITH EXTENDED SHANK Available with 3/8" or 1/2" MNPT connections; EPDM gauge glass gaskets and 1/4" needle drain valve in lower arm are both standard. DESCRIPTION • 1-3/4" standard shank length; for 1-1/4" shank length, use – 07 suffix • 21-100 rated 125 psig @ 350°F, 300 psig @ 100°F Model Number 21-101 21-102 21-104 21-105 21-150* 21-151* 21-204 21-205 21-250* 21-251* Pipe Size (in.) 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 • 21-200 rated 200 psig @ 400°F, 400 psig @ 100°F (See note!) • CRN Registered • Equipped with two copper guard rods Glass O.D. & Length 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 Wt./100 (lbs.) 163 175 185 197 195 207 215 219 215 215 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION * Automatic Model Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. 23-400 & 23-450 SERIES STAINLESS STEEL LIQUID LEVEL GAUGES Ideal for handling alcohol solvents, acetic acid and ketones. Automatic models conform to ASME requirements; aluminum and composition handwheels. DESCRIPTION • PTFE reinforced gauge glass gaskets, stem packings • Chemical resistant PTFE seat • 5/16" diameter full flow all SS drain valve with safety handle NonAutomatic Automatic • Guard rod bracket to accommodate four SS guard rods • Rated 500 psig @ 450°F (See note!) • High pressure gauge glass standard • CRN Registered Model Number 23-401-00 23-402-00 23-404-00 23-405-00 Pipe Size (in.) 1/2 1/2 3/4 3/4 Glass O.D. & Length 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 Wt./100 (lbs.) 385 385 450 450 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION 23-450-00 23-451-00 23-453-00 23-454-00 1/2 1/2 3/4 3/4 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 390 390 455 455 ALUMINUM COMPOSITION ALUMINUM COMPOSITION Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. 102 Customer Service 1-704-841-6000 Water Gauges Water Gauges & Accessories TUBULAR GAUGE GLASS PROTECTOR Reduces risk of injury and damage from broken exploding glass; maximum length: 50". DESCRIPTION • No. I-2733* 5/8" Glass Protector • No. I-2734* 3/4" Glass Protector • Made to fit most water gauges • Not available on 23-400, 23-650, 24-300, 24-600 models • CRN Registered Note: Water gauge part number and centerline length are required when ordering. Priced according to length and application. Customer Service 1-704-841-6000 103 Plumbing Specialties Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. DESCRIPTION • 26-100: rated up to 125 psig • 26-300: soft metal seat/stuffing box rated up to 250 psig • 26-310: stainless steel ball seat/stuffing box rated up to 250 psig 26-300 *26-100 series is not available with packing nut Specify the following suffix for finish: 01 - Satin Brass; 28 - Polished Brass. 27-400 SERIES Model Number 26-101 26-102 26-104 26-105 26-301 26-302 26-304 26-305 26-307 26-308 26-311 26-312 26-314 26-315 26-317 26-318 Pipe Size (in.) 3/8 3/8 1/2 1/2 3/8 3/8 1/2 1/2 3/4 3/4 3/8 3/8 1/2 1/2 3/4 3/4 Wt./100 (lbs.) 25.0 30.0 28.3 30.0 39.0 40.0 40.0 44.0 49.0 51.7 39.0 42.0 40.0 44.0 50.0 50.0 Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION STEAM GAUGE SIPHON 90˚ and 180˚ configurations, made from 1/4" heavy gauge seamless brass tubing. DESCRIPTION • Brass (-01) • 27-401 is 180˚ loop, 27-402 is 90˚ loop • Service rating: 250 psig saturated steam, 400 psig at 100˚ Model Number 27-401 27-402 35-200 SERIES Size (in.) 0.25 0.25 Wt./100 (lbs.) 0.44 40.0 COMPRESSION BIBB FAUCET Features heavy pattern with large opening. DESCRIPTION • Rough brass finish; sizes 1/2" and 3/4" Model Number 35-201-10 35-202-10 104 Size (in.) 0.50 0.75 Customer Service 1-704-841-6000 Wt./100 (lbs.) 58.3 57.0 Plumbing Specialties Plumbing Specialties BALL VALVE BIBB FAUCET 35-300 SERIES Features heavy pattern with large opening. DESCRIPTION • Rough brass finish; sizes 1/2" and 3/4" Model Number 35-301-03 35-302-03 Size (in.) Inlet (in.) 1/2 1/2 sweat/threaded connector 3/4 3/4 thread connector Outlet (in.) 0.75-11.5 NHR hose 0.75-11.5 NHR hose Wt./100 (lbs.) 38.4 44.5 45-100 SERIES OIL TANK VALVES Designed to assure trouble-free operation and compact shut-off. DESCRIPTION • For use with fuel oil, water, other liquids; not with steam • Operating pressure 10 psi • Temp. range -20˚F to 250˚F Model Number 45-101-01 45-102-01 45-103-01 45-104-01 NPT Pipe x Flared Tube 1/2 x 3/8 1/2 x 1/2 3/4 x 3/8 3/4 x 1/2 Wt./100 (lbs.) 27.6 29.9 32.0 33.1 Model Number 45-105-01 45-106-01 45-107-01 45-108-01 NPT Pipe x Comp. w/Nut Sleeve 1/2 x 3/8 1/2 x 1/2 3/4 x 3/8 3/4 x 1/2 Wt./100 (lbs.) 27.0 30.0 31.7 32.0 78-124 & 78-125 SERIES 5-PORT TANK SELECTOR Unique ball design allows for higher flow capacities. Five port construction allows access to four tanks using only one valve. DESCRIPTION • Five NPT connections • Bronze ball valve with stainless steel Lever and Nut • PTFE seats and RPTFE stem packing • Stem packing adjustable for wear Model Number 78-124-01 78-125-01A Size (in.) 1/2 3/4 A 0.50 0.75 B 1.26 1.56 • Non-lubricated • 50 psig pressure rating • Operation: four selected inlets feed one common outlet • Pointer on handle indicates the selected inlet • Easy mounting design Dimensions (in.) C D E 2.52 2.27 3.53 3.12 2.93 3.87 Customer Service 1-704-841-6000 F 1.12 1.53 G 10-24 1/4-20 H 1.40 1.98 Wt./100 (lbs.) 106 264 105 Plumbing Specialties Air Cocks 41 SERIES AIR COCKS (FOR AIR USE ONLY) An economical way to shut-off air lines. Nut bottom available for pressures to 200 psig with 1/8" port. Many handle configurations. Spring bottom with 5/32" port standard. DESCRIPTION • Spring bottom cocks tested at 80 psig air • Available in satin or polished brass or satin chrome • Maximum temperature is 500˚F tee handle round shoulder tee handle hexagon shoulder Type Standard Nut Bottom Model Number lever handle round shoulder lever handle hexagon shoulder 41-060 41-070 41-080 41-090 41-120 41-130 41-140 41-150 tee handle double male thread lever handle double male thread 41-180 41-190 41-203 41-210 41-220 41-230 41-240 41-251 tee handle bibb nose lever handle bibb nose 41-260 41-270 41-280 41-330 41-290 41-300 41-310 41-320 106 Satin Brass -01 -04 Size (in.) TEE HANDLE ROUND SHOULDER 1/8 1/4 TEE HANDLE HEXAGON SHOULDER 3/8 1/2 LEVER HANDLE ROUND SHOULDER 1/8 1/4 LEVER HANDLE HEXAGON SHOULDER 3/8 1/2 TEE HANDLE DOUBLE MALE THREAD 1/8 1/4 3/8 1/2 LEVER HANDLE DOUBLE MALE THREAD 1/8 1/4 3/8 1/2 TEE HANDLE BIBB NOSE 1/8 1/4 3/8 1/2 LEVER HANDLE BIBB NOSE 1/8 1/4 3/8 1/2 Customer Service 1-704-841-6000 Wt./100 (lbs.) 12.8 13.0 17.0 20.0 13.1 14.2 17.0 22.9 14.0 17.9 20.0 33.1 14.0 18.5 19.1 31.3 14.5 16.3 33.3 36.0 16.5 15.0 32.1 36.0 Plumbing Specialties Air Cocks AIR COCKS (FOR AIR USE ONLY) 41 SERIES An economical way to shut-off air lines. Nut bottom available for pressures to 200 psig with 1/8" port. Many handle configurations. Spring bottom with 5/32" port standard. DESCRIPTION • Spring bottom cocks tested at 80 psig air • Available in satin or polished brass or satin chrome • Maximum temperature is 500˚F Type Standard Nut Bottom Satin Brass -01 -04 Wt./100 Size (in.) (lbs.) TEE HANDLE DOUBLE FEMALE 1/8 13.0 41-370 41-380 1/4 14.0 41-390 3/8 26.0 41-391 1/2 27.0 TEE HANDLE MALE & FEMALE 1/8 13.0 41-400 41-410 1/4 14.0 41-420 3/8 21.0 41-421 1/2 26.0 LEVER HANDLE DOUBLE FEMALE 1/8 14.8 41-430 41-440 1/4 13.0 41-450 3/8 23.0 41-451 1/2 27.0 LEVER HANDLE MALE & FEMALE 1/8 15.2 41-460 41-470 1/4 15.0 41-480 3/8 23.0 41-481 1/2 27.0 TEE HANDLE MALE & FEMALE HEX SHOULDER 1/8 17.0 41-490 41-500 1/4 15.0 41-510 3/8 23.0 41-511 1/2 25.0 LEVER HANDLE MALE & FEMALE HEX SHOULDER 1/8 14.0 41-520 41-530 1/4 15.0 41-540 3/8 22.1 27.0 41-541 1/2 TEE HANDLE DOUBLE FEMALE HEX SHOULDER 41-550 1/8 17.0 41-560 1/4 17.0 25.0 41-570 3/8 41-571 1/2 28.3 LEVER HANDLE DOUBLE FEMALE HEX SHOULDER 41-580 1/8 15.0 41-590 1/4 18.2 24.0 41-600 3/8 41-601 1/2 28.8 TEE HANDLE STRAIGHT NOSE HEX SHOULDER 41-630 1/8 15.7 15.0 41-640 1/4 LEVER HANDLE STRAIGHT NOSE HEX SHOULDER 41-650 1/8 14.0 41-660 1/4 15.0 tee handle double female tee handle male & female Model Number Customer Service 1-704-841-6000 lever handle double female lever handle male & female tee handle male & female hex shoulder lever handle male & female hex shoulder tee handle double female hex shoulder lever handle double female hex shoulder tee handle straight nose hex shoulder lever handle straight nose hex shoulder 107 Plumbing Specialties Air Cocks 41 HEAVY & EXTRA HEAVY PATTERN AIR COCKS Heavy and extra heavy patterns for stronger applications. DESCRIPTION • Rated for air pressure up to 250 psig with nut version • Extra heavy pattern rated for 150 WSP - nut bottom only Type Standard Nut Bottom Satin Brass -01 -04 Model Number Wt./100 Size (in.) (lbs.) HEAVY PATTERN TEE HANDLE DOUBLE FEMALE 1/4 28.00 41-102 LEVER HANDLE DOUBLE FEMALE 41-103 1/4 27.00 EXTRA HEAVY PATTERN TEE HANDLE DOUBLE FEMALE 1/8 32.00 41-200 41-202 1/4 32.00 TEE HANDLE DOUBLE FEMALE HEXAGON SHOULDER 1/4 38.00 41-222 TEE HANDLE MALE AND FEMALE 1/4 20.00 41-250 42-100 SERIES DRAIN COCKS Rough brass construction; rated for 25 psig. DESCRIPTION • Sizes: 1/8", 1/4", 3/8" and 1/2" Type Standard Nut Bottom Satin Brass -01 -04 Model Number 42-101 42-102 42-103 42-104 Size (in.) 1/8 1/4 3/8 1/2 * see above suffix key 108 Customer Service 1-704-841-6000 Orifice (in.) 3/16 1/4 3/8 3/8 Wt./100 (lbs.) 20.4 15.0 35.0 38.0 Plumbing Specialties 43-100 SERIES STEAM GAUGE COCKS Female fitting with male union for easy installation. DESCRIPTION • Rated 100 WSP for standard bottom, 150 WSP for nut version • Available in polished brass or satin brass finish Model Number 43-101 Size (in.) 1/4 Wt./100 (lbs.) 45 Designate (-05) suffix for polished brass; (-01) suffix for satin brass. 44-100 SERIES HOSE END COCKS Interior diameter hose sizes: 3/8" to 7/16" DESCRIPTION • 3/16" port; rated 25 psig • Available in polished brass or satin brass finish Model Number 44-101 44-102 44-103 44-104 Size (in.) 1/8 1/4 3/8 1/2 Wt./100 (lbs.) 19 22 23 25 Designate (-05) suffix for polished brass; (-01) suffix for satin brass. 46-100 SERIES STANDARD COCKS Wrench operated model with square head and 125 psig rating. Sizes from 1/4" FNPT to 1" FNPT. Model Number 46-101-01 46-102-01 46-103-01 46-104-01 46-105-01 Customer Service 1-704-841-6000 Size (in.) 1/4 3/8 1/2 3/4 1 Wt./100 (lbs.) 33.0 30.0 48.0 66.0 173.8 109 Plumbing Specialties Gas Cocks 50 SERIES MANUAL MAIN CONTROL VALVES CSA design certified for 1/2 psig and temperatures from 32° to 125°F. Complies to ANSI Z 21.15.CGA 9.1-M97. DESCRIPTION • Factory tested 100% at 10 psig • Bronze construction, stainless steel springs • Capacities to 7.8 million Btu/hour • Equal female inlet/outlet Model Number 50-203 50-303 50-403 50-503 50-603 50-703 50-803 Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 Handle Suffix Position Size Pilot (in.) 1/8 NPT 1/4 NPT BTU/hr. 800,000 1,310,000 2,100,000 3,250,000 3,700,000 7,300,000 7,800,000 W 01 05 Wt./100 (lbs.) 88 156 197 300 478 845 1000 A 2.50 2.94 3.94 3.66 4.37 5.44 5.87 X 02 06 Dimensions B C 1.44 1.72 1.69 2.06 2.19 2.87 2.75 3.16 3.31 3.50 3.72 4.50 3.72 4.50 Y 03 07 Z 04 08 All main burner valves furnished with 1/8" NPT pilot tapping. Valves 1" and larger can be furnished with 1/4" NPT pilot tapping. 51 SERIES GAS SERVICE COCKS Tee or lever handle cocks; CSA design certified. In sizes 1/4" to 3/4". DESCRIPTION • Capacities: 117,000 to 749,000 Btu/hour • Designed to meet ANSI Z21.15.CGA 9.1 requirements of 1/2 psig at temperatures from 32° F to 125°F • Accepted for use in City of New York Department of Buildings MEA 45-90-M T-Handle with Stop Lever Handle w/Stop 110 Model Number 51-103-01 51-104-01 51-105-01 51-106-01 Pipe Size (in.) 1/4 3/8 1/2 3/4 Wt./100 (lbs.) 35 47 54 83 Capacity (BTU/hr.) 117,000 274,600 274,000 749,000 51-107-01 51-108-01 51-109-01 3/8 1/2 3/4 50 56 87 274,600 274,600 749,000 Customer Service 1-704-841-6000 D 2.75 3.50 3.87 4.69 5.75 6.75 6.75 Plumbing Specialties Gas Cocks 52 SERIES GAS SERVICE COCKS Available with tee head, flat head, square head or lever head in sizes from 1/4" to 1". Wrench operated and tested at 125 psig. DESCRIPTION • For operation up to 500°F • Nut and washer bottom with stop T-Head Flat Head Model Number 52-101-01 52-102-01 52-103-01 52-104-01 52-105-01 Size (in.) 1/4 3/8 1/2 3/4 1 Wt./100 (lbs.) 32.0 29.0 45.0 65.8 92.9 52-201-01 52-202-01 52-203-01 52-204-01 52-205-01 1/4 3/8 1/2 3/4 1 30.0 28.0 43.0 57.0 90.6 Square Head Lever Head Model Number 52-301-01 52-302-01 52-303-01 52-304-01 52-305-01 Size (in.) 1/4 3/8 1/2 3/4 1 Wt./100 (lbs.) 31.0 28.0 43.0 62.7 90.0 52-401-01 52-402-01 52-403-01 52-404-01 52-405-01 1/4 3/8 1/2 3/4 1 34.3 31.0 46.0 66.7 97.0 53 SERIES GAS COCKS Available in male and female sizes: 1/8", 1/4" and 3/8". Model Number 53-299-01* 53-300-01* 53-301-01 Male Size (in.) 1/8 1/4 3/8 Female Size (in.) 1/8 1/4 3/8 Wt./100 (lbs.) 14.0 18.5 45.0 * Design certified by CSA to meet ANSI Z21.15.CGA 9.1 pressure requirements of 1/2 psig 54 SERIES GAS HOSE COCKS & APPLIANCE CONNECTOR VALVE CSA design certified brass and wood handled valves with 56,500 Btu/hour capacity. Model Pipe Size Number (in.) 54-101-01 3/8 54-102-01 1/2 54-103-01 3/4 54-201-01 3/8 54-202-01 1/2 Handle Brass Brass Brass 3/8 SAE 3/8 SAE Wt./100 (lbs.) 41.0 34.8 40.0 36.0 33.4 Model Pipe Size Wt./100 Number (in.) Handle (lbs.) 54-203-01 1/2 1/2 SAE 35.0 54-204-01 3/4 1/2 SAE 45.1 54-206-01 3/4 5/8 SAE 50.0 54-207-01 1/2 5/8 SAE 57.0 44.0 3/8 SAE 54-208-01 3/4 54-209-01 3/4 1/2 MNPT 44.0 54-401-01 3/8 *3/8 SAE 35.0 *3/8 SAE 33.0 54-402-01 1/2 * Flared end threaded 9/16 thread 55-302 SERIES GAS COCK WITH THROTTLE ADJUSTMENT DESIGN CERTIFIED BY CSA DESCRIPTION • Designed to meet ANSI Z21.15.CGA9.1-M97 pressure requirements of 1/2 psig • Thread size: 1/4" male x 1/4" female Model Number 55-302-01 Size (in.) 1/4 M x 1/4 F Customer Service 1-704-841-6000 Wt./100 (lbs.) 33 111 Plumbing Specialties Gas Cocks PILOT COCKS 56 SERIES Wide variety of CSA design certified pilot cocks. Designed to meet ANSI Z21.15.CGA 9.1-M97 pressure requirements of 1/2 psig at temperatures from 32˚ to 125˚ F. 56-111-01 56-112-01 Model Number 56-111-01 56-112-01 56-221-01 56-222-01 56-302-01* 56-601-01 56-602-01 56-603-01 56-604-01 Thread Size 1/8 NPT x 1/4 Tube Plain 1/8 NPT x 1/4 Tube Throttle Adjust. 1/8 NPT x 1/8 FNPT Plain 1/8 NPT x 1/8 FNPT Throttle Adjust. 1/8 NPT x 1/4 Tube 1/8 NPT x 1/4 Tube Right Hand 1/8 NPT x 1/4 Tube RH Throttle Adjust 1/8 NPT x 1/4 Tube Left Hand. 1/8 NPT x 1/4 Tube LH Throttle Adjust. Wt./100 (lbs.) 15.0 14.0 16.1 16.1 08.0 17.0 17.0 17.0 17.0 * Not CSA Certified 56-221-01 56-302-01 56-602-01 Water Heater Drain Valves 31-200 & 31-500 SERIES 90° DRAIN VALVES For deluxe water heaters and low pressure boilers. DESCRIPTION • All cast bronze bodies • 31-200 Series heavy pattern, 3/4" MNPT inlet, aluminum wheel only • 31-500 Series standard pattern, 1/2" NPT, three wheel types available • Steel (-01), Aluminum (-07), Polished Chrome (-07). I.D. NPT of thread machined for 1/2" copper pipe Model Number 31-202-04 31-212-04 31-501-04 112 Wt/100 (lbs.) 43.00 46.50 31.00 Customer Service 1-704-841-6000 Shank Length (in.) 5/8" 15/16" 5/8" Plumbing Specialties Water Heater Drain Valves COMBINATION TEE & DRAIN VALVES 31-400 SERIES Permits supplying and draining of water through a single tank tapping and it meets CSA requirements. DESCRIPTION • All cast bronze bodies • Wheel options • Pressure to 100 psig; temperatures to 250˚ F • 3/4" FNPT inlet x 3/4" male hose end x 3/4" FNPT side outlet Model Number 31-401-01 31-401-07 Wt/100 (lbs.) 62.00 62.00 Handle Steel Handle Chrome Handle ANGLED BODY WATER HEATER DRAIN VALVES 31-600 & 31-700 SERIES All drains are equipped with Conbraco packing seal assuring easy turning stem and leak proof drain. Various shank lengths available. Meets CSA requirements. DESCRIPTION • All cast bronze bodies • Drains are furnished with zinc plated steel, chrome finished steel or red painted aluminum wheels • Pressure rating in excess of 100 psig • 31-600: 3/4" MNPT inlet • 31-700: 1/2" or 3/4" FNPT inlet • Maximum temperature 250˚ F Model Number 31-600 31-601 31-602 31-604 31-606 31-607 31-608 31-609 31-610 31-611 31-612 Wt/100 (lbs.) 27.3 36.0 35.0 43.0 49.5 48.0 52.0 52.0 57.2 60.0 66.3 31-700 31-701 39.0 37.0 Shank Inlet Length (in.) (in.) 5/8" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2 2-1/4" 2-1/2" 2-3/4" 3" 31-700 Series 1/2" 3/4" 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 3/4" MNPT 31-600 31-700 3/4" MNPT 3/4" MNPT APOLLO® 31B SERIES BOILER DRAIN BALL VALVES 31B-100 SERIES These valves are designed to easily drain water and sediment from boiler and water heater systems in compact installations. They feature a standard hose connection and 3⁄4" male NPT boiler connection. They are available in 1", 2", or 3" shank lengths to suit your application. DESCRIPTION • All bronze/brass, one-piece body construction • 250˚F temperature rating • 100 psi pressure rating Model Number 31B-101-01 31B-102-01 31B-103-01 Size (in.) 1.0 2.0 3.0 Customer Service 1-704-841-6000 Wt./100(lbs.) 0.36 0.47 0.61 113 Plumbing Specialties Notes 114 Customer Service 1-704-841-6000 Plumbing Specialties Terms and Conditions Terms and Condition of Sale Payment: 2% 10th prox. Net 30 days. All prices F.O.B. Matthews, N.C., or Pageland, S.C., with freight allowed on shipments of 750 pounds or $4,000 net and over to all shipping points within the United States excluding Alaska and Hawaii. No freight allowed on Air Freight or Parcel Post shipments. Claims for shortages must be made within 10 days of receipt of material. Our responsibility ends when a receipt is furnished us by the carrier. No Invoice Rendered For Less Than $50.00. No freight will be allowed on Air Freight, Air Express, Parcel Post or U.P.S. shipments.Other Conbraco Products may be combined to make sufficient weight for full freight allowance. Phone order quoted prices are subject to correction. Prices and designs are subject to change without notice. Orders for material or special design or specification are made to customer’s order and are not subject to cancellation or return. Goods returned to us will not be accepted unless a full explanation has been made and our written authorized permission obtained. All goods returned – if accepted – will be credited at invoice price, less 30% for service and rehandling charges, plus shipping expenses.We reserve the right to adjust orders to box quantities. Warranty and Limitations of Liability Conbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of one year from the date of delivery to you, our initial purchaser. Should any failure to conform to this warranty appear within one year after the date of the initial delivery to our initial purchaser, Conbraco will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco's recommendations and standard industry practice, correct such defects by suitable repair or replacement at Conbraco's own expense. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of Conbraco to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether express or implied shall pass through our initial purchaser to any other person or corporation. LIMITATION OF LIABILITY: Conbraco Industries, Inc. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, DAMAGE TO LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET FORTH HEREIN, ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE CONBRACO GOODS UPON WHICH SUCH LIABILITY IS BASED. Customer Service 1-704-841-6000 115 SALES AND SERVICE DEPARTMENT PO Box 247 • Matthews, NC 28106 Phone: 704-841-6000 • Fax: 704-841-6020 [email protected] [email protected] [email protected] 901-547-0042 214-201-0100 713-462-7766 901-547-0035 214-201-0104 713-690-6228 [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] 913-491-0797 630-378-4300 618-394-0329 502-459-4545 586-774-7760 952-937-0108 402-573-7000 330-538-0406 913-491-5126 630-378-0343 618-394-0427 502-459-9944 586-774-1490 952-937-0803 402-573-7371 330-538-0410 [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] 510-786-2480 909-594-7088 303-575-6701 503-249-6972 206-405-4370 808-456-3331 480-813-1313 510-786-0246 909-594-2798 303-575-6706 503-288-4464 206-405-4390 808-455-1064 480-813-2800 Southern Marketing Group AVC Mechanical Sales, Inc. Knox & Associates MS/TN-West/AR/Bowie Cty.-TX Oklahoma/Texas-North Texas-South/Louisiana HEBCO, Inc. New Tech Marketing New Tech Marketing J.L. Whitfill & Associates, Inc. V.E. Sales Co., Inc. Northstar Valve & Fitting, Inc. WilIco, Inc. Morrissey Associates, Inc. Kansas/Missouri-West IL/WI-East/IN-North/MI-Upper Peninsula/IA-/River Counties Eastern Missouri/Southern Illinois Kentucky/Indiana-South/Ohio-South Michigan (Except Upper Peninsula) Minnesota/North & South Dakota/Wisconisn-West Nebraska/Iowa (Except River Counties) Ohio-North/Pennsylvania-West/West Virginia-West HARCRO Sales Specification Sales Marshall-Rodeno Associated Braley-Gray & Associates Commercial Application Sales Layden Valve Sales & Solutions Southwestern Mechanical Sales Co. California-North California-South CO/WY/MT/ID-SE/UT/NV-NE/NM/El Paso-TX Oregon/SW Washington/Western Idaho Alaska/Washington Hawaii Arizona/Nevada-SW Urell, Inc. McMahon Marketing, Inc. Continuous Sales Corporation Cope-Wardell-Ammon Associates Keith Engle & Associates Massachusetts/New England States New York-Upstate/New York-West New York-East/New Jersey-North Pennsylvania-East/Delaware/New Jersey-South OEM accounts [email protected] [email protected] [email protected] [email protected] [email protected] 617-923-9500 518-792-3350 516-575-6800 610-485-2828 610-827-9560 617-926-9414 518-792-3351 516-349-8411 610-485-7171 610-827-9561 Conbraco Industries, Canada Barclay Sales Ltd. Dynamic Agencies, Ltd. Tom Beggs Agencies Ltd. Task Controls, Inc. Agences J. Pierre Sylvain, Inc. Kern Industries, Ltd. Kern Industries Calgary, Ltd. J. Levandier Sales, Inc. Smith Agencies Key to the North Sales Agency, Inc. Pelco Sales 160 Pennsylvania Ave., Unit 3, Concord, Ontario L4K 4A9 British Columbia Saskatchewan Manitoba/NW Ontario Ontario Quebec Alberta-North Alberta-South Nova Scotia, New Brunswick, Prince Edward Island Newfoundland Ontario-North Eastern-Ontario/Ottawa [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] 905-761-6161 604-945-1010 306-343-1901 204-953-1900 416-291-3004 450-655-9588 780-451-2056 403-730-7791 506-858-1615 709-364-8856 705-524-6714 613-839-0114 905-761-6666 604-945-3030 306-343-1901 204-774-6915 416-754-3481 450-641-2737 780-454-6687 403-239-8179 506-858-1084 709-747-9414 705-566-0148 613-839-0115 Rafael Rodriguez Barril, Inc. Conbraco International Limited Puerto Rico Manchester, England [email protected] [email protected] 787-982-1550 44-161-908-2340 787-982-1570 +44-161-908-2359 Int’l./ Puerto Rico Southeast Region 813-901-8403 770-263-6899 864-578-4889 804-213-3802 Southern Region 813-901-0992 770-447-1227 864-578-4334 804-213-3801 Florida Georgia/Alabama North Carolina/South Carolina/Tennessee-East Virginia/Maryland/Washington, D.C./WV-East Midwestern Region [email protected] [email protected] [email protected] [email protected] B. Lynch & Associates Spotswood Associates Pro Marketing, Inc. Mid South Marketing, Inc. Western Region Fax Northeast Region Phone Canada E-Mail Address For Representatives And Distributors In Your International Area Please Contact The Closest Conbraco Industries International Office. Conway, SC • Matthews, NC • Pageland, SC • Customer Service 1-704-841-6000 • www.conbraco.com Printed in USA • Copyright 2005 CPCA9000 • 5/05