Preview only show first 10 pages with watermark. For full document please download

Applying Forever Multi-trans To Mugs

   EMBED

Share

Transcript

Multi-Trans Printing onto Colored & White Mugs ONE PAPER SYSTEM FOR LED PRINTERS WITH WHITE TONER & LASER PRINTERS Printing Instructions Transferring Instructions For Standard CMYK LED Laser Printers - Make sure to select the proper media setting from print menu; check your printer manual for additional printing instructions. 1. Preparing for Transfer: Heat Mug Press Application - Place heat transfer paper with printed side in desired position on mug using heat transfer tape. - Mirror image. - Place mug into press. - Use multi-purpose or bypass tray (manual feeding) - Press at 284 degrees F and apply heavy pressure for 180 seconds. - Print the image on the coated (unprinted) side of the transfer paper. Using an OKI White Toner Printer? - We recommend the transparency setting for this paper. 2. Peel - Let mug cool down and peel off and peel. - If you see a light shadow of white toner on your mug, you can easily remove it with Isopropanol. Care Instructions Storing - 1 year shelf life, and we recommend to store in a closed plastic bag away from excessive humidity, temperatures or sunlight for best life. Washing - Dishwasher friendly! IMPORTANT: We thoroughly test each of our products on various substrates using different transfer equipment. However, it is impossible for us to duplicate all variables using all substrates and transfer equipment. Therefore, it is essential that you test the paper prior to production using your equipment, methods, and substrate material. Heat presses vary in accuracy. Conduct tests to determine the best time and temperature to use with your equipment. Please keep in mind that the Seller’s and Manufacturer’s maximum obligation shall be to replace any paper that has proven to be defective. Neither the Seller nor the Manufacturer shall be liable for injury, direct or consequential, arising out of the use of, or inability to use the paper.