Preview only show first 10 pages with watermark. For full document please download

Ar Cabinets

   EMBED

Share

Transcript

AR Cabinets AR Cabinets One collection -various applications Thorough and uncompromising surface treatment Our tight cabinets offer protection against harmfull environmental conditions for electrical, electronic, hydraulic and pneumatic equipment. Assembly method is chosen accoording to equipment to be fitted. The equipment, components and the racks can be assembled on the mounting plates, shelves, swing frame or mounting rails. Standing freely on the floor, the cabinets are fit for individual mountings as well as row assembly. Because we perform the entire surface treatment by ourselves, we can ensure its high quality. The basis for the ultimate corrosion protection is the decreasing process where the cold-rolled steel is cleaned. The clean sheet is then phosphated which gives the surface a thin phosphate coat. This improves the adhesion of the paint. Finally the cabinets are being powder painted. In the own the paint is being polymerized forming a viscose and enduring surface which complies to the M4 special tolerance tests and requirements. Welded frame A solid base for the cabinet is a welded frame. It has proved its durability both in practical applications and dynamic bearings tests. The cabinet´s tightness ond solid structure is due to the wellthought-out frame solution. It is built up with rapid-fastener walls, doors, adjustable base, mounting plate and a roof with an eye bolt. The result of the executed vibration tests are available if needed( sine wave IEC 68-2-6, research reports TEL 7176, TEL 7210). Versatatile usage with accessories With accessories you can widen the application range of the cabinet outside the instrumentation. To prevent overheating inside the cabinet there are a variety of fans, heat exchangers and refrigeration equipment. Besides the standard configuration, we have some mechanical solutions to offer according to customers needs, for example openings, special dimensions of the cabinet and materials as stainless steel and aluminium. Acknowledged quality work around the world The AR- Cabinets are manufactured of excellent raw materials according to the standard norms. The manufacturing accuracy is according to the common tolerance in punching techniques( SFS 4012).The dimensioning complies to the SFS 2528, 2667 and 2972 standard requirements as well as SESKO recommendations. Our products are widely used in the different fields of Industry. The flexibility of our standard cabinet significantly lengthens lifespan of tailored solutions. Contents Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 9 Cabinets for 19" system applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 – 16 Cooling, standard values, instructions for selection. . . . . . . . . . . . . . . . . . . . 17 Calculation formula, definition of radiating surface. . . . . . . . . . . . . . . . . . . . 18 Natural/mechanical ventilation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Tables for the selection of openings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Overhead lead-throughs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 IP-ratings and applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 – 23 We reserve the right to change products and the content of the brochure without prior notice. Such changes do not entitle claiming compensation for damages. 2 AR Cabinets Series 400, 600, 800, 1000 ja 1200 W Serie 400, cabinets for cabling in row assembly AR 1644 AR 1646 AR 2044 AR 2045 AR 2046 H 1600 1600 2000 2000 2000 W 400 400 400 400 400 D 400 600 400 500 600 H Serie 600 AR 1664 AR 1666 AR 1668 AR 2064 AR 2066 AR 2068 H 1600 1600 1600 2000 2000 2000 W 600 600 600 600 600 600 D 400 600 800 400 600 800 D Serie 800 AR 1684 AR 1686 AR 2084 AR 2085 AR 2086 AR 2088 H 1600 1600 2000 2000 2000 2000 W 800 800 800 800 800 800 D 400 600 400 500 600 800 H height W width D depth Code reading instruction: AR 1644 H = 1600 (AR1644) W = 400 (AR1644) D = 400 (AR1644) Serie 1000 AR 16104 AR 20104 AR 20106 H 1600 2000 2000 W 1000 1000 1000 D 400 400 600 AR 16124 AR 20124 AR 20125 AR 20126 AR 20128 H 1600 2000 2000 2000 2000 W 1200 1200 1200 1200 1200 D 400 400 500 600 800 Serie 1200 AR Cabinets 3 Series 400, 600, 800, 1000 ja 1200 Top Rear wall Sidewall Door Mounting plate Sidewall Frame Adjustable bottom Double door General • enclosure rating • plate thickness Things to be observed in row assemblies for Cabinets IP65 frame, painted, s = 2 mm door, painted, s = 2 mm mounting plate s = 3 mm, hot galvanized steelplate • door opening angle approx. 130 degrees • rod-latch locking with two-point locking • handle • standard Colour, RAL 7032, customer colours also available • both for stand-alone and row assemblies 4 AR Cabinets • choose appropriate connecting bars (see Accessories on page 14) • choose appropriate intermediate mounting plate when you need an integrated surface for the mounting plate when assemblies from one cabinet to another (see Accessories on page 13). • remind of possible omitted standard components of the cabinets, for instance side panels and mounting plate • 180 degrees hinges are recommended Serie 400 • Cabinets for cabling in row assembly    % X    Standard assembly: • Frame • Door • Rear door • Top and Adjustable bottom • Fixing rail (1 pair) • Lifting eyes   E  . Standard door 7BLJPPWJ Ordering number Frame (mm) H h1 .Y X  X X  Spacing +BLP20 mm  8 E     I I ) I   W Floor fixing w1 D w2 d1 Lifting eyes w3 d2 Mounting plate * (mm) Weight h2 w5 kg ** AR 1644 1600 1445 400 304 400 341 343 337 337 1470 290 60 AR 1646 1600 1445 400 304 600 341 543 337 537 1470 290 64 AR 2044 2000 1845 400 304 400 341 343 337 337 1870 290 70 AR 2045 2000 1845 400 304 500 341 443 337 437 1870 290 75 AR 2046 2000 1845 400 304 600 341 543 337 537 1870 290 80 * Accessory, ** weight without mounting plate AR Cabinets 5 Serie Sarja 600  Spacing 20 mm +BLP X    Standard assembly: • Frame • Top and Adjustable bottom • Door • Mounting plate • Walls 3 pcs  E E  X   Standard door 7BLJPPWJ . 6 Cabinets for 19" assembly, see page 10. Frame (mm) H h1  X  8 Ordering number .Y  % X     I  I ) I   W Floor fixing w1 D w2 d1 Lifting eyes w3 d2 Mounting plate (mm) h2 w5 Weight kg AR 1664 1600 1445 600 504 400 541 343 537 337 1470 490 100 AR 1666 1600 1445 600 504 600 541 543 537 537 1470 490 120 AR 1668 1600 1445 600 504 800 541 743 537 737 1470 490 140 AR 2064 2000 1845 600 504 400 541 343 537 337 1870 490 120 AR 2066 2000 1845 600 504 600 541 543 537 537 1870 490 140 AR 2068 2000 1845 600 504 800 541 743 537 737 1870 490 160 AR Cabinets Serie Sarja 800 I       I ) I  %        . • Frame • Top and Adjustable bottom • Door • Mounting plate • Walls 3 pcs Frame (mm) H h1  Standard assembly: Cabinets for 19" assembly, see page 10. Ordering number   E E Standard 7BLJPPWJdoor     X    X Double 1BSJPWJdoor     Spacing +BLP20 mm X 8 .Y X  W Floor fixing w1 D w2 d1 Lifting eyes w3 d2 Mounting plate (mm) h2 w5 Weight kg AR 1684 1600 1445 800 704 400 741 343 737 337 1470 690 120 AR 1686 1600 1445 800 704 600 741 543 737 537 1470 690 140 AR 2084 2000 1845 800 704 400 741 343 737 337 1870 690 150 AR 2085 2000 1845 800 704 500 741 443 737 437 1870 690 160 AR 2086 2000 1845 800 704 600 741 543 737 537 1870 690 170 AR 2088 2000 1845 800 704 800 741 743 737 737 1870 690 190 AR Cabinets 7 Serie Sarja 1000 I     Double door 8 .Y  % X Standard door 7BLJPPWJ          .   E       Spacing +BLP20 mm X  X 1BSJPWJ X E    I I )   Standard assembly: • Frame • Top and Adjustable bottom • Door • Mounting plate • Walls 3 pcs Ordering number 8 Frame (mm) H h1 W Floor fixing w1 D w2 d1 Lifting eyes w3 d2 Mounting plate (mm) h2 w5 Weight kg AR 16104 1600 1445 1000 904 400 941 343 937 337 1470 890 145 AR 20104 2000 1845 1000 904 400 941 343 937 337 1870 890 175 AR 20106 2000 1845 1000 904 600 941 343 937 537 1870 890 190 AR Cabinets Serie Sarja 1200 I   .Y X  % X     I ) I    Spacing +BLP20 mm 8       E    E  X X  .Y Ordering number Standard assembly: • Frame • Top and Adjustable bottom • Door • Mounting plate • Walls 3 pcs Frame (mm) H h1 W Floor fixing w1  D w2 d1 Lifting eyes w3 d2 Mounting plate (mm) h2 w5 Weight kg AR 16124 1600 1445 1200 1104 400 1141 343 1137 337 1470 1090 170 AR 20124 2000 1845 1200 1104 400 1141 343 1137 337 1870 1090 200 AR 20125 2000 1845 1200 1104 500 1141 443 1137 437 1870 1090 210 AR 20126 2000 1845 1200 1104 600 1141 543 1137 537 1870 1090 220 AR 20128 2000 1845 1200 1104 800 1141 743 1137 737 1870 1090 240 AR Cabinets 9 Cabinets for 19" assembly B C D E   Serie 600 Door infront (19" mounting frame) Door behind (in the frame behind standard 19" assembly space) Things to be observed in 19" assemblies for Cabinets Distance from the inner surface of the door to the outer surface from the accessory Type of the door and location on the frame Place to install Metal door in front 19" mounting frame 99 mm (a) 19" mounting frame Door with window in front 19" mounting frame 104 mm (b) Door with window instead of metal door, 19" mounting frame Metal door behind 19" space as standard in the cabinet frame behind 19" space as standard in the cabinet frame behind Door with window behind Accessories to order 77 mm (c) Metal door instead of rear wall 82 mm (d) Door with window instead of rear wall Door behind (19" rear mounting frame) 19"   Serie 800 Door in front (19" mounting frame) J K f, h Door in front (swing frame) B C Things to be observed in 19" assemblies for Cabinets Distance from the inner surface of the door to the outer Accessories to order surface from the accessory Type of the door and location on the frame Place to install Metal door in front 19" mounting frame 99 mm (a) 19" mounting frame Metal door in front Swing frame 75 mm (f ) Swing frame Door with window in front 19" mounting frame 104 mm (b) Door with window in front Swing frame 80 mm (h) Metal door behind 19" rear mounting frame 99 mm (i) Door with window behind 19" rear mounting frame 104 mm (j) 10 AR Cabinets Door with window instead of metal door, 19" mounting frame Door with window instead of metal door, swing frame Metal door instead of rear wall, 19" rear mounting frame Door with window instead of rear wall, 19" rear mounting frame Accessory Ordering number Dimensions HxW H = height, W = width AR 1644 AR 1646 AR 2044 AR 2045 AR 2046 AR 1664 AR 1666 AR 1668 AR 2064 AR 2066 AR 2068 AR 1684 AR 1686 AR 2084 AR 2085 AR 2086 AR 2088 AR 16104 AR 20104 AR 20106 AR 16124 AR 20124 AR 20125 AR 20126 AR 20128 19" Accessories Serie 400 600 800 1000 1200 19" RAIL, pair 1U = 44,45 mm AR 24514 32U o o o o o AR 24524 41U o o o o o o AR 24554 32U o o AR 24564 41U o o o o 19" MOUNTING FRAME AR 22813 1454 x 528 32U o o o AR 22853 1854 x 528 41U o o o AR 22903 1454 x 728 32U o o AR 22913 1854 x 728 41U o o o o 19" REAR MOUNTING FRAME AR 24544 32U o o AR 24534 41U o o o o SWING FRAME, 1 U = 44,45 mm • Hinge beam for swing frame must be ordered for series 1000 and 1200 AR 21713 31U o o o o o o o o o o o o AR 21773 40U o o o o o o o o PARTIAL-HIGH SWING FRAME • 2 pairs of intermediate beam must be ordered for serie 600 AR 29491 6U o o o o o o AR 29501 9U o o o o o o AR 29511 12U o o o o o o AR 214051 20U o o o o o o o o o o o o o o o o o o AR 214071 24U o o o o o o o o o o o o o o o o o o AR 25743 6U o o o o o o o o o o o o AR 25773 9U o o o o o o o o o o o o AR 25803 12U o o o o o o o o o o o o AR 25833 16U o o o o o o o o o o o o AR 25863 20U o o o o o o o o o o o o AR 25893 24U o o o o o o o o o o o o HINGE BEAM FOR SWING FRAME, pair • Hinge beam must be ordered for series 1000 and 1200 AR 21903 o o o AR 21693 o o o LIMITER FOR SWING FRAME (gas spring) AR 26543 o o o o o o o o o o o o FRONT PANEL 19" 1U = 44,45 mm AR 25512 1U o o o o o o o o o o o o o o o o o o AR 25522 2U o o o o o o o o o o o o o o o o o o AR 25532 3U o o o o o o o o o o o o o o o o o o AR 215002 4U o o o o o o o o o o o o o o o o o o AR 215012 5U o o o o o o o o o o o o o o o o o o AR 25542 6U o o o o o o o o o o o o o o o o o o FRONT PANEL 19" ventilated AR 25552 1U o o o o o o o o o o o o o o o o o o AR 25562 2U o o o o o o o o o o o o o o o o o o AR 25572 3U o o o o o o o o o o o o o o o o o o AR 25582 6U o o o o o o o o o o o o o o o o o o SHELF 19" AR 03479 490 x 375 o o o o o o o o o o SHELF WITH SLIDING RAIL for 19" assembly • rails are included IE 02082/19" 600 x 800 o o AR 214451/19" 600 x 600 o o FIXATION SET • includes 16 mm srew, cage nut and nylon washer AR 28861 M6 o o o o o o o o o o o o o o o o o o o o o o o AR 28851 M5 o o o o o o o o o o o o o o o o o o o o o o o CAGE NUT • 100 pcs AR 23761 M6 o o o o o o o o o o o o o o o o o o o o o o o 19" Rail 19" rear mounting rail 19" Mounting rail Swing frame o o o o o o o o o o o o o o o o o o o o For adjusting partial-high swing frame to depth direction with intermediate beam Hinge beam for swing frame o o o o o o o o o o o o o o o o o o o o o o o o Partial-high swing frame Front panel 19" Front panle 19" ventilated o o o o o o Shelf 19" o o Shelf with sliding rails for 19" assembly AR Cabinets 11 Double door Accessory Ordering number Dimensions AR 1644 AR 1646 AR 2044 AR 2045 AR 2046 AR 1664 AR 1666 AR 1668 AR 2064 AR 2066 AR 2068 AR 1684 AR 1686 AR 2084 AR 2085 AR 2086 AR 2088 AR 16104 AR 20104 AR 20106 AR 16124 AR 20124 AR 20125 AR 20126 AR 20128 Accessories • doors with accessories Serie 400 Hinge beam Partial-high door Door with window Door limiter 12 AR Cabinets 600 800 1000 1200 DOOR H x W, H = height, W = width AR 22743 1532 x 390 o o AR 22773 1932 x 390 o o o AR 22323 1532 x 590 o o o AR 22553 1932 x 590 o o o AR 22373 1532 x 790 o o AR 22583 1932 x 790 o o o o AR 22403 1532 x 990 o AR 22603 1932 x 990 o o DOUBLE DOOR H x W AR 25163 1532 x (394 + 390) o o AR 25223 1932 x (394 + 390) o o o o AR 25243 1532 x (494 + 490) o AR 25273 1932 x (494 + 490) o o AR 22443 1532 x (594 + 590) o AR 22623 1932 x (594 + 590) o o o o PARTIAL-HIGH DOOR, hinge beam is needed AR 24813 392 x 590 o o o o o o AR 24863 792 x 590 o o o o o o AR 24913 962 x 590 o o o o o o AR 24963 1132 x 590 o o o o o o AR 24843 392 x790 o o o o o o AR 24893 792 x790 o o o o o o AR 24943 962 x790 o o o o o o AR 24993 1132 x790 o o o o o o HINGE BEAM, for partial-high door AR 25144 o o o o o o AR 25154 o o o o o o DOOR WITH WINDOW, aluminiun profile width 58 mm. Available also with smoke-coloured plexiglass. AR 23811 1533 x 591 o o o AR 23941 1933 x 591 o o o AR 23931 1533 x 791 o o AR 23951 1933 x 791 o o o o HINGE 180 degrees AR 25201 pari o o o o o o o o o o o o o o o o o o o o o o o o o 3-POINT LOCKING AR 25304 o o o o o o o o o o o o o o o o o o o o o o o o o SWING HANDLE AR 23781 2 keyes o o o o o o o o o o o o o o o o o o o o o o o o o TRIANGULAR LATCH, 8 mm with wrench AR 212691 2 keys o o o o o o o o o o o o o o o o o o o o o o o o o DOOR LIMITER, hinges on the right AR 26516 O o o o o o o o o o o o o o o o o o o o o o o o o o DOOR LIMITER, hinges on the left AR 26516 V o o o o o o o o o o o o o o o o o o o o o o o o o DOCUMENT POCKET AR 23772 A4, plastic o o o o o o o o o o o o o o o o o o o o AR 03367 A3, adjustable o o o o o o o o o o o o o o o o o o o o Document pocket A3 Document pocket A4 Serie 400 600 AR 2085 AR 2086 AR 2088 AR 16104 AR 20104 AR 20106 AR 16124 AR 20124 AR 20125 AR 20126 AR 20128 Dimensions AR 2084 Accessory Ordering number AR 1644 AR 1646 AR 2044 AR 2045 AR 2046 AR 1664 AR 1666 AR 1668 AR 2064 AR 2066 AR 2068 AR 1684 AR 1686 Accessories • mounting plates 800 MOUNTING PLATE H x W AR 21294 1470 x 290 o o AR 21304 1870 x 290 o o o AR 21214 1470 x 490 o o o AR 21254 1870 x 490 o o o AR 21224 1470 x 690 o o AR 21264 1870 x 690 o AR 21234 1470 x 890 AR 21274 1870 x 890 AR 21244 1470 x 1090 AR 21284 1870 x 1090 PARTIAL-HIGH MOUNTING PLATE, depth of the cabinet must be informed AR 24604 365 x 490 o o o o o o AR 24614 765 x 490 o o o o o o AR 24624 898 x 490 o o o o o o AR 24634 1076 x 490 o o o o o o AR 24644 365 x 690 o o o AR 24654 765 x 690 o o o AR 24664 898 x 690 o o o AR 24674 1076 x 690 o o o AR 24684 365 x 890 AR 24694 765 x 890 AR 24704 898 x 890 AR 24714 1076 x 890 AR 24724 365 x 1090 AR 24734 765 x 1090 AR 24744 898 x 1090 AR 24754 1076 x 1090 SUPPORT for mounting plate AR 26574 pair o o o o o o o o o INTERMEDIATE MOUNTING PLATE AR 23044 1434 x 106 o o o o o AR 23054 1834 x 106 o o o o SIDE MOUNTING PLATE AR 24214 1390 x 285 o o o AR 24234 1790 x 285 o o o AR 24224 1390 x 485 o o o AR 24244 1790 x 485 o o AR 24494 1390 x 685 o AR 24254 1790 x 685 o AR 24384 1790 x 385 o PARTIAL-HIGH MOUNTING PLATE AR 24264 328 x 285 o o o o o o AR 24274 728 x 285 o o o o o o AR 24284 861 x 285 o o o o o o AR 24294 1039 x 285 o o o o o o AR 24454 328 x 385 o AR 24464 728 x 385 o AR 24474 861 x 385 o AR 24484 1039 x 385 o AR 24304 328 x 485 o o o o o AR 24314 728 x 485 o o o o o AR 24324 861 x 485 o o o o o AR 24334 1039 x 485 o o o o o AR 24344 328 x 685 o o AR 24354 728 x 685 o o AR 24364 861 x 685 o o AR 24374 1039 x 685 o o 1000 1200 o o o o o o Mounting plate o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Partial-high mounting plate o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Intermediate mounting plate o o o o o o o o o o o o o o o o o o o o o o o o o o o o Side mounting plate AR Cabinets 13 Accessory Ordering number Dimensions AR 1644 AR 1646 AR 2044 AR 2045 AR 2046 AR 1664 AR 1666 AR 1668 AR 2064 AR 2066 AR 2068 AR 1684 AR 1686 AR 2084 AR 2085 AR 2086 AR 2088 AR 16104 AR 20104 AR 20106 AR 16124 AR 20124 AR 20125 AR 20126 AR 20128 Accessories • universal Serie 400 Stationary shelf with brackets Shelf with sliding rails Connection bar Mounting plate Strain relief rail, are used when mounting plate is included. Model R is used when mounting plate is not included Cable clamps for strain relief rail 14 AR Cabinets 600 800 1000 STATIONARY SHELF (Fixed brackets are included) AR 02110 510 x 225 o o AR 02122 710 x 225 o o AR 02034 510 x 425 o o AR 02067 710 x 425 o o AR 02065 910 x 425 AR 02036 510 x 585 o o AR 214431 710 x 600 o SHELF with sliding rails AR 02061 465 x 425 o o AR 02066 665 x 425 o o AR 02064 865 x 425 AR 02060 465 x 585 o o AR 214441 600 x 680 o SUPPORT RAIL, pair, for example supporting racks AR 23454 o o o o o o o o o o AR 23464 o o o o o o o o o AR 23474 o o o o o o o o AR 23484 o o o o o o INTERMEDIATE BEAM, pair, for extra support for mounting plate and for other fixing AR 21414 o o o o o o o AR 21434 o o o o o o AR 21454 o o o AR 21464 o o CONNECTION BAR, pair AR 23014 o o o o o o o AR 23024 o o o o o AR 23034 o o o AR 23064 o o o STRAIN RELIEF RAIL for cables • Cabinet with mounting plate AR 21554 o o o o o AR 21514 o o o o o o AR 21524 o o o o o o AR 21534 o AR 21544 STRAIN RELIEF RAIL R for cables • Cabinet without mounting plate AR 21564 o o o o o AR 04235 o o o o o o AR 21574 o o o o o o AR 21584 o AR 21594 CABLE CLAMPS for strain relief rails AR 04901 max. Ø. 22 mm o o o o o o o o o o o o o o o o o o AR 04902 max. Ø. 30 mm o o o o o o o o o o o o o o o o o o AR 04903 max. Ø. 38 mm o o o o o o o o o o o o o o o o o o C-PROFILE BAR 19" AR 26226 o o o o o o CABLE CLAMPS for C-profile bars AR 04906 max. Dia. 22 mm o o o o o o o o o o o o o AR 04905 max. Dia. 30 mm o o o o o o o o o o o o o AR 04904 max. Dia. 38 mm o o o o o o o o o o o o o Intermediate beam Support rail 1200 o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Accessory Ordering number Dimensions AR 1644 AR 1646 AR 2044 AR 2045 AR 2046 AR 1664 AR 1666 AR 1668 AR 2064 AR 2066 AR 2068 AR 1684 AR 1686 AR 2084 AR 2085 AR 2086 AR 2088 AR 16104 AR 20104 AR 20106 AR 16124 AR 20124 AR 20125 AR 20126 AR 20128 Accessories • universal Serie 400 600 PLINTH H (height) = 100 mm AR 23391 400 x 400 o o AR 23441 400 x 500 o AR 23251 400 x 600 o o o o AR 23291 600 x 600 o AR 23301 600 x 800 o AR 23261 800 x 400 AR 23401 800 x 500 AR 26141 800 x 800 AR 23271 1000 x 400 AR 23311 1000 x 600 AR 23281 1200 x 400 AR 23411 1200 x 500 AR 23321 1200 x 600 1200 x 800 AR 23431 PLINTH H (height) = 200 mm AR 29271 400 x 400 o o AR 29281 400 x 500 o AR 29291 400 x 600 o o o o AR 29301 600 x 600 o AR 29311 600 x 800 o AR 29321 800 x 400 AR 29331 800 x 500 AR 29351 800 x 800 AR 29361 1000 x 400 AR 29371 1000 x 600 AR 29381 1200 x 400 AR 29391 1200 x 500 AR 29401 1200 x 600 1200 x 800 AR 29411 PLINTH WITH VIBRATION ABSORBER H (height) = 100 mm AR 26621 400 x 400 o o AR 26641 400 x 500 o AR 26631 400 x 600 o o o o AR 03352 600 x 600 o AR 03346 600 x 800 o AR 26651 800 x 400 AR 26691 800 x 500 AR 26711 800 x 800 AR 26661 1000 x 400 AR 26681 1000 x 600 AR 26671 1200 x 400 AR 26701 1200 x 500 AR 03335 1200 x 600 1200 x 800 AR 03354 WHEELS, load carrying capacity 300 kg AR 23611 serie of 4 pcs o o o o o o o o o LIGHT 220 V/11 W AR 04204 o o o o AR 04206 AR 26261 AR 04207 TOUCH-UP PAINT (spray) AR 23701 RAL 7032 o o o o o o o o o GROUNDING CABLE 4 mm2 AR 27131 90 mm o o o o o o o o o AR 27141 200 mm o o o o o o o o o AR 27151 350 mm o o o o o o o o o 800 1000 1200 o o o o Plinth o o o o o o o o o o o o o o o o o o o o o o o o o o o o Plinth with vibration absorber o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Light AR Cabinets 15 115 80 Top with adjustable cable inlet Raised top Top IP23 Filter fan 16 AR Cabinets Accessory Ordering number Dimensions AR 1644 AR 1646 AR 2044 AR 2045 AR 2046 AR 1664 AR 1666 AR 1668 AR 2064 AR 2066 AR 2068 AR 1684 AR 1686 AR 2084 AR 2085 AR 2086 AR 2088 AR 16104 AR 20104 AR 20106 AR 16124 AR 20124 AR 20125 AR 20126 AR 20128 Accessories • universal Serie 400 TOP WITH ADJUSTABLE CABLE INLET AR 27193 400 x 400 o o AR 27203 500 x 400 o AR 27223 600 x 400 o o AR 27233 600 x 600 AR 27243 600 x 800 AR 27253 800 x 400 AR 27263 800 x 500 AR 27273 800 x 600 AR 27283 800 x 800 AR 27293 1000 x 400 AR 27303 1000 x 600 AR 27313 1200 x 400 AR 27323 1200 x 500 AR 27333 1200 x 600 AR 27343 1200 x 800 BLIND FLANGE CII MA 32751 steel o o o o o MULTIGATE FLANGE MC 35 100990 o o o o o RAISED TOP W x D AR 23204 400 x 400 o o AR 23244 400 x 500 o AR 23114 600 x 400 o o AR 23154 600 x 600 AR 23164 600 x 800 AR 23124 800 x 400 AR 23214 800 x 500 AR 23104 800 x 800 AR 23134 1000 x 400 AR 23174 1000 x 600 AR 23144 1200 x 400 AR 23224 1200 x 500 AR 23184 1200 x 600 AR 23234 1200 x 800 TOP IP 23 W x D AR 210064 400 x 400 o o AR 23244 500 x 400 o AR 212921 600 x 400 o o AR 212931 600 x 600 AR 212941 600 x 800 AR 212951 800 x 400 AR 212961 800 x 500 AR 212971 800 x 800 AR 212981 1000 x 400 AR 212991 1000 x 600 AR 213001 1200 x 400 AR 213011 1200 x 500 AR 212021 1200 x 600 AR 212031 1200 x 800 AXIAL FAN AR 40374 450 m3/h 19" RADIAL FAN AR 23711 320 m3/h 19" FILTER FAN, model on page 19 AR 214561 PF1000 24 m3/h AR 214571 PF2000 60 m3/h AR 214581 PF3000 230 m3/h AR 214591 PF4000 355 m3/h AR 214601 PF5000 502 m3/h AR 214611 PF6000 720 m3/h EXHAUST FILTER, model on page 19 AR 214621 PFA 1000 AR 214631 PFA 2000 AR 214641 PFA 3000 ja 4000 AR 214651 PFA 5000 ja 6000 600 o 800 1000 1200 o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Instructions for cooling design Cooling B) Untight cabinet The objective of cooling is to shed the dissipation power – heat – created by the equipment in the cabinet. Too high a temperature inside the cabinet leads to unreliable operation of the equipment. Filter on the bottom, elevated ceiling on the top The following cooling methods are utilised in the cabinets: **) Approximately 5 – 10 % less power exits from the surface of components installed in the cabinets than indicated. A filter is used both on the top and on the bottom of the cabinet to maintain the IP rating. An alternative is to use a filter on the bottom (page 20) and an elevated ceiling on the top, but in this case the IP rating is lower. • Mechanical ventilation. A filter fan is installed at the bottom of the cabinet and a filter on the top. The IP rating remains unchanged (page 20). • Heat exchanger is a suitable air conditioning method for demanding conditions. The IP rating remains unchanged. • Cooling unit is the only method which lowers the temperature inside the cabinet below the outside temperature. The IP rating remains unchanged. Standard values Exit of dissipation power from the free standing cabinet AR2066, dimensions H x W x D 2000 x 600 x 600, DT = 20 K A) Tight cabinet Internal convection approx. 300 – 400 W *) Fan-assisted internal approx. convection 450 – 550 W *) Heat exchanged Cooling unit approx. 1000 W depending on the model approx. 1000 – 3000 W depending on the model *) Approximately 5 – 10 % less power exits from the surface of components installed in the cabinets than indicated. approx. 650 – 700 W **) Fan filter on approx. – 2000 W the bottom, exhaust **) depending on filter on the top the model Choosing the right solution The following aspects, among others, must be considered before choosing the cooling system: a) The IP rating required b) Environment of the cabinet: for example temperature, dust, dirt, corrosion risk c) Existing and required conditions inside the cabinet, for example, dissipation power, allowed temperature, circulation of air Greater dissipation power can be achieved by using an elevated ceiling and air opening on the bottom of the cabinet than by means of natural ventilation. This will lower the IP rating of the cabinet. The area of the air openings and the free surface area of the elevated ceiling are the main factors affecting the ability to emit greater dissipation power. The surface of every cabinet radiates a certain amount of heat to the environment. The following parameters are essential when calculating the radiation of heat up to +50 °C differences in temperature.. • “Free” surface area of the cabinet, surface that is not restricted from any side. • Heat radiation capacity of painted steel W/m2 K • Air conditioning outside the cabinet • Component density inside the cabinet, risk of thermal locks Only the first item can be calculated accurately. A commonly used value for the second item is 5.5 W/m2 K for cabinets installed indoors. The impact of the last two items can only be estimated. 2000 30 1500 Heat loss Ps (W) • Unforced, natural ventilation. The amount of heat power radiated from the cabined can be read from the table or calculated. The estimated values can be multiplied by three in case of cabinets installed outdoors due to the free flow of air on the outer surfaces of the cabinet. Circulation of air inside the cabinet is often prevented by the equipment installed. The impacts of these heat locks can be avoided by means of careful engineering and/or installation of an internal fan. Mechanical ventilation of air inside the cabinet also increases internal conduction and balances heat differences between different parts of the cabinet. If air is not circulated, heat will accumulate in the top of the cabinet. 20 1000 900 800 700 600 500 400 re tu a er s os l ΔT K) 15 ( 10 p em 7,5 T 5 300 200 Heat radiation from a freely standing cabinet Conditions: installation indoors, no air flow K = 5.5 W/m2 K 150 100 1 1,5 2 3 4 5 6 7 8 9 10 Heat emitting area of the cabinet (m2) AR Cabinets 17 Calculation formulae Ps Pv ΔT Ti Tu A k V q = Heat loss emitted from the cabinet surface (W) = Total dissipation power of the equipment installed (W) = Maximum allowable temperature difference between the inside and outside of the cabinet (°C) = Internal temperature of the cabinet (°C) = Surrounding temperature (°C) = Total heat emitting area of the cabinet = Conductivity factor, painted steel sheet ~5,5 (W/m2K) = Air volume flow (m3/h) = Heat power of the heat exchanger (W/K) Emission of heat from the cabinet Ps Ti Ti Ti = = > < ΔT = ΔT x A x k Tu + ΔT; internal temperature of the cabinet without air conditioning Tu –> ΔT = Ti– Tu; heat transfer from the cabinet Tu –> ΔT = Tu– Ti; heat transfer to the cabinet Pv Axk tai Ps Axk Filter fans Ti = Tu + ΔT, Ps = ΔT x A x k; internal temperature of the cabinet 3.1 x Pv 3.1 x Pv ; heat loss radiating from the cabinet not taken into account V 3.1 x Pv Pv – Ps V = 3.1 x , ΔT = 3.1 x ; heat loss radiating from the cabinet taken into account ΔT V Pv Pv  – A x k ), ΔT = V , combination of the two V = 3.1 x ( ΔT + (A x k ) 3.1 Further information on heat exchangers and cooling units from Sales V = ΔT , ΔT = Definition of radiating surface Temperature difference ΔT (K), Heat loss Ps (W), Heat emitting area of the cabinet Atot (m2) Free-standing cabinets Single cabinet: Atot = 2A1 + 2A2 +A3 Row cabinet, N cabinets: Atot = 2NA1 + 2A2 +NA3 A3 A1 A2 Cabinets standing against the wall Single cabinet Atot = A1 + 2A2 +A3, when the cabinet is standing against the wall and the neighbouring room is warmer than the room where the cabinet is located Atot = 2A1 + 2A2 +A3, when the cabinet is located 5–10 cm from the wall and the neighbouring room is cooler than the room where the cabinet is located Row cabinet, N cabinets: Atot = NA1 + 2A2 +NA3, when the cabinet is standing against the wall and the neighbouring room is warmer than the room where the cabinet is located Atot = 2NA1 + 2A2 +NA3, when the cabinet is located 5–10 cm from the wall and the neighbouring room is cooler than the room where the cabinet is located 18 AR Cabinets Natural and mechanical ventilation Exhaust filter Filter fan Natural ventilation Mechanical ventilation Natural ventilation is a suitable cooling method when dissipation power is low and the cabinet has been located in a spacious, cool room. An advantage is the low maintenance requirement. Mechanical ventilation is an efficient way to emit excessive heat from the cabinet. It is an inexpensive, lowmaintenance solution. The system consists of filters of the required size and corresponding openings either in the wall or door of the cabinet. Elevated ceiling can also be used as an exhaust passage. The opening for exhaust filter and filter fan The system consists of a filter fan of the required size and corresponding openings either in the wall or door of the cabinet. Technical data of the filter fan (mechanical ventilation): Technical data of the exhaust filter: Filtering level: 73 % standard filter Installation position: free Enclosure: self-extinguishing ABS plastic Colour: RAL 7032 Temperature: –20…+70 °C Relative humidity: 90 % DIN EN 779: G2, G3 ja G4 if required EXHAUST FILTER Ordering number AR 214621 AR 214631 IP 43 IP 54 As exhaust filters, with the exception of the operating temperature: –10…+55 °C Finger protection: Steel mesh FILTER FAN Size of the opening Ordering number Volyme flow 92 mm x 92 mm AR 214561 24 m3/h AR 214571 58 m /h IP 54 125 mm x 125 mm AR 214613 155 m3/h IP 54 223 mm x 223 mm AR 214581 255 m3/h IP 54 223 mm x 223 mm AR 214601 478 m3/h IP 54 291 mm x 291 mm AR 214611 606 m /h IP 54 291 mm x 291 mm AR214612 755 m /h IP 54 291 mm x 219 mm 125 mm x 125 mm AR 214641 IP 54 223 mm x 223 mm AR 214651 IP 54 291 mm x 291 mm 3 3 3 Size of the opening IP 43 92 mm x 92 mm AR Cabinets 19 Selection of openings AR 214601 AR 214611 AR 214612 AR 214581 AR 214613 AR 214571 AR 214561 Filter fan AR 214651 Loca- Exhaust filter tion of opening AR 214641 Cabinet AR AR 214631 Product AR 214621 " Double door  Table for selecting openings door/fan/filter AR 22323 1664, 1666, 1668 A B o o o o o o o o o o o AR 22553 2064, 2066, 2068 A B o o o o o o o o o o o AR 22373 1684, 1686 A B o o o o o o o o o o o o o o o o o o o o o o o B o o o A B o o o AR 25223 2084, 2085, 2086, 2088 X A B o o o o o o o AR 22403 16104 A B o o o o o o o o o o o AR 22603 20104, 20106 A B o o o o o o o o o o o AR 25243 16104 X A B o o o o o o o o o o o AR 25273 20104, 20106 X A B o o o o o o o o o o o AR 22443 16124 X A B o o o o o o o o o o o AR 22623 20124, 20125, 20126, 20128 A B o o o o o o o o o o o AR 214611 AR 214612 Table for selecting openings walls/fan/filter AR 214601 Filter fan AR 214581 $ Exhaust filter AR 214613 Location of opening AR 214571 Cabinet AR AR 214561  Product AR 214651 Location of opening on the door A X AR 214641 8 2084, 2085, 2086, 2088 1684, 1686 AR 214631 # AR 22583 AR 25163 AR 214621  ) DOOR ) REAR WALL AR 21963 1664, 1666,1668 C D o o o o o o o o o o o AR 22073 2064, 2066, 2068 C D o o o o o o o o o o o AR 21983 1684, 1686 C D o o o o o o o o o o o AR 22093 2084, 2085, 2086, 2088 C D o o o o o o o o o o o AR 22003 16104 C D o o o o o o o o o o o AR 22113 20104, 20106 C D o o o o o o o o o o o AR 22023 16124 C D o o o o o o o o o o o AR 22133 20124, 20125, 20126, 20128 C D o o o o o o o o o o o  SIDE WALL % 8 Location of opening on the wall Further information on the selection of exhaust filters and filter fans from Sales. 20 AR Cabinets AR 21934 1684,16104, 16124 C D o o o o o o o AR 21963 1666, 1686 C D o o o o o o o o o o o AR 21983 1668 C D o o o o o o o o o o o AR 22053 2064, 2084, 20104, 20124 C D o o o o o o o AR 22073 2066, 2086, 20106, 20126 C D o o o o o o o o o o o AR 22093 2068, 2088, 20128 C D o o o o o o o o o o o AR 22173 2085, 20125 C D o o o o o o o o o o o Example order The AR 2086 cabinet with one opening (B) on the door. One fan filter AR 214561on the opening and one opening (C) with one exhaust filter AR 214621 on the rear wall. Order: 1 pcs AR 2086 cabinet 1 pcs AR 214561 filter fan 1 pcs AR 22583 door with opening B 1 pcs AR 214621 exhaust filter, on the rear wall 1 pcs AR 20773 rear wall with opening C The ducts on the top The top with entries 8  The openings are intended for C(II) flanges both for standard and raised top Top Raised top Opening pattern 1644, 2044 AR 210064 AR 23204 400 1646, 2046 AR 20814 AR 23114 B 400 2045 AR 23244 AR 23244 B E 600 1664, 2064 AR 20814 AR 23114 B % 400  AR Cabinet 600 1666, 2066 AR 20854 AR 23154 B E 800 1684, 2084 AR 20824 AR 23124 B 800 1686, 2086 AR 20864 AR 23164 B E H 800 2085 AR 20904 AR 23214 B E 800 2088 AR 20944 AR 23104 B E H 1000 16104, 20104 AR 20834 AR 23134 B 1000 16106, 20106 AR 20874 AR 23174 B E H 1200 16126, 20126 AR 20884 AR 23184 B E H 1200 16124, 20124 AR 20844 AR 23144 B 1200 20125 AR 20914 AR 23224 B E 1200 20128 AR 20924 AR 23234 B E H Opening pattern B   Serie Opening pattern E Example order: AR 20814 top, opening pattern B   Serie AR Cabinet Order number 400 1644, 2044 AR 27193 400 1646, 2046 AR 27213 400 2045 AR 27203 600 1664, 2064 AR 27223 600 1666, 2066 AR 27233 600 1668, 2068 AR 27243 800 1684, 2084 AR 27253 800 2085 AR 27263 800 1686, 2086 AR 27273 800 2088 AR 27283 1000 16104, 20104 AR 27293 1000 16106, 20106 AR 27303 1200 16124, 20124 AR 27313 1200 20125 AR 27323 1200 16126, 20126 AR 27333 1200 20128 AR 27343   Adjustable opening on the top Flange C(II) SFS 2528, steel Ordering number MA 23751, includes sealing and fastening gear  Opening pattern H 115 80 Top with entries Adjustable opening on ceiling AR Cabinets 21 Degree of protection according to IEC 60529 Degree of protection is marked with two characters. Degree of protection against solid foreign objects: first characteristic numeral Degree of protection against water: second characteristic numeral Degree of protection Degree of protection Brief description Definition Brief description Definition 1 Protected against solid foreign objects of 50 mm Ø and greater The object probe, sphere of 50 mm Ø, shall not fully penetrate1) 1 Protected against vertically falling water drops Vertically falling drops shall have no harmfull effects 2 Protected against solid foreign objects of 12,5 mm Ø and greater The object probe, sphere of 12,5 mm Ø, shall not fully penetrate1) 2 Protected against vertically falling water drops when enclosure tilted up to 15° Vertically falling drops shall have no harmfull effects when the enclosure is tilted at any angle up to 15° on either side of vertical 3 Protected against solid foreign objects of 2,5 mm Ø and greater The object probe, sphere of 2,5 mm Ø, shall penetrate at all1) 3 Protected against spraying water Water sprayed at an angle up to 60° on either side of the vertical shall have no harmful effects 4 Protected against solid foreign objects of 1,0 mm Ø and greater The object probe, sphere of 1,0 mm Ø, shall not penetrate at all1) 4 Protected against splashing water Water splashed against the enclosure from any direction shall have no harmful effects 5 Dust-protected Ingress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety 5 Protected against water jets Water projected in jets against the enclosure from any direction shall have no harmful effects 6 Dust tight No ingress of dust 6 Protected against powerful water jets Water projected in powerful jets against the enclosure from any direction shall have no harmful effects 7 Protected against the effects of temporary immersion in water Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time. 1) The full diameter of the object probe shall not pass through an opening of the enclosure 22 AR Cabinets Customized modifications In addition to standard cabinets and enclosures, we offer entities tailored to meet the customers’ needs with different accessories, dimensions and shapes An application of our standard product: tester cabinet tailored to meet our customer’s needs. AR Cabinets 23 Idea Design Prototype Testing Serial production Ocotec Oy is a contract manufacturer specialising in industrial component purchase, assembly and the manufacture of cabinet mechanics. Ocotec Oy´s customers operate in the fields of IT, automation and the machine building industry Main products of Ocotec Oy are: Tightness rated cabinets and casings Cabinets AR, IP54 KAS, IP 55 Enclosures MA, IP 65 RL- Enclosures for teminal block assembly LN lan products LN Cabinets and Enclosures SC Server cabinets ODM contract manufacturing Product development Testing Prototypes Serial production Assembly Equipment and component manufacture Ocotec Oy Annalankankaantie 18 90830 Haukipudas, Finland 24 AR Cabinets NOV2007 Tel. +358 20 743 1020 Fax +358 20 743 1021 www.ocotec.fi