Transcript
Applications
Array Systems/Install/Touring
AR208
,
2 Woofer da 200mm in Neodimio in cabinet reflex
,
1 Driver da 44mm in Polyimide caricato a tromba 120°x 9°
,
Pilotaggio Full-Range o BI-AMP (con crossover passivo)
,
Per touring o installazioni fisse
MINI VERTICAL LINE ARRAY SYSTEM
AR208 è un diffusore acustico ideale per creare dei sistemi array verticali. AR208 può essere utilizzato come sistema principale nella più vasta gamma di impieghi professionali di applicazioni audio. La configurazione minima di questo sistema è di quattro diffusori, mentre per aumentare la gittata e la dispersione verticale otto o più diffusori sono raccomandati. Per estendere le prestazioni in gamma bassa estrema è consigliabile accoppiare il sub woofer AR118.
The AR208 was designed to support the widest possible range of pro audio applications. It is ideal for vertical curvilinear array systems, the minimum configuration of this system is four enclosures for full performance eight or more are recommended. The AR118 compact array subwoofer makes an ideal complement to the AR208.
,
Two 200mm LF Neodimnyum in vented enclosure
,
44mm Polyimide Driver on Horn 120°x 9°
, ,
Fly mounting points Powering mode Full-range or BIAMP (With internal passive crossover) For touring or fixed installation
www.lss.it
,
Product Information
LSS Advanced Speakers Systems Via On. Longo 53 - 89024 Polistena (RC) ITALY Tel. (39) 966 932199 - Fax (39) 966 933007 Email:
[email protected] - Internet: www.lss.it
LSS AR208 è un diffusore acustico a due vie reflex capace di riprodurre altissime pressioni sonore a bassa distorsione. AR208 utilizza due woofers a lunga escursione da 200 mm con bobina da 50mm e magnete in Neodimio e un driver a compressione da 44mm in Polyimide caricato in una speciale tromba 120°x9°. Alta pressione, bassa distorsione, controllo della dispersione sono i punti di forza di questo sistema. LSS AR208 è specificatamente progettato per sistemi di array verticale, per il touring o le installazioni fisse.
LSS's AR208 2-way loudspeaker system provides high output, low distortion sound reinforcement for the entire range of pro audio applications. The 200 mm low frequency cone with 50mm voice coil with Neodimnyum magnet and 44mm voice coil high frequency compression driver provides higher output and lower distortion plus enhanced power handling capabilities for better performance in both touring and permanently installed applications. LSS's AR208 is designed specifically for vertical curvilinear array.
AR208
Dimensions
MINI VERTICAL LINE ARRAY SYSTEM
Data Sheet
Enclosure Material , Enclosure material Birch Plywood of 15mm , Finish Texture poliuretanic black paint , Suspension 8 point mounting suspension , Grille Poweder coated perforated steel , Connectors Two Neutrik NL4 speakon , Optional Accessories Flygth Case for four AR208
SIDE 50cm
FRONT 70cm
26cm
Weights Kilograms , Net Weight(including flying hardware) 23 , Shipping Weight 30 , System Configuration 2way BI-AMP
50cm
Dimensions mm (±1 mm) , Height 260 , Front Width 700 , Depth 500 , Trapezoid Angle (degrees) 5°per side
REAR 70cm 18cm
Phisycal
TOP
Performance
BOTTOM
Frequency Response , ±3 dB 50Hz to 18KHz , -10 dB 42Hz Sensitivity (dB 1 watt @ 1 m) , Full Range Passive 96dB , LF 96dB , HF 103dB Nominal Input Impedance (ohms) , Full Range Passive 16+16 , LF 16 , HF 16 Power Handling (watts cont. AES) , LF 400 , HF100 SPL (referenced to 1 m 1w) , Full Range Passive 96dB Nominal Dispersion (degrees @ - 6 dB) , Horizontal 120° , Vertical 9°
, Product Series AR , LF Subsystem & Loading Two 200mm woofer vented , HF Subsystem & Loading One 25mm exit/44mm voice coil , Operating Mode Passive Full-Range or BI-AMP (with Internal crossover)
Additional Date
LSS Advanced Speakers Systems Via On. Longo 53 - 89024 Polistena (RC) ITALY Tel. (39) 966 932199 - Fax (39) 966 933007 Email:
[email protected] - Internet: www.lss.it
© 2005 LSS Advanced Speakers Systems
