Transcript
Quick Installation Guide For more information, please visit our website http://www.tp-link.com
AC600 High Gain Wireless Dual Band USB Adapter MODEL NO. Archer T2UH
7106505773 REV3.0.0
Connect to a Computer Option 1: Directly
Option 2: Via the USB Extension Cable
Note: 1. In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel. 2. In Windows 8.1, the adapter is able to search for Wi-Fi networks after being inserted, but it will not function properly until you install the driver and utility below.
Install Driver and Utility You can also download the driver and utility at www.tp-link.com.
1 Insert the CD.
For Mac OS X
For Windows
2
Run the Autorun.exe on the pop-up window. Select Archer T2UH and click Install Driver&Utility, then follow the InstallShield Wizard to complete the installation.
Browse the CD, go to Archer T2U_T2UH > Mac OS X Driver, unzip the TP-LINK_Installer.bmg file and run the Installer. Follow the wizard to complete the installation.
Setup Wizard
SHELL
Installer.pkg
uninstall.command
Archer T2UH
Archer T2U
Install Driver&Utility User Guide
Browse CD
EXIT
Join a Wireless Network For Mac OS X
For Windows Option 1: Via TP-LINK Utility
Option 1: Via TP-LINK Utility
Select your Wi-Fi network from the pop-up utility window and click Connect. The symbol indicates a successful connection.
A: Select the Site Survey tab of the pop-up utility window. B: Select your Wi-Fi network and click CONNECT. The connection status can be viewed on the Link Status screen. Wireless Utility Profile
Status
WPS
Network Name(SSID)
TP-LINK_A
Network
Profile
Security WPA/WPA2-Personal Connect automatically
Advanced Channel
SoftAP Signal
6 (2.4G)
Connect
34567_TEST
WPA/WPA2-Personal
2 (2.4G)
abcdef_0903
None
149 (5G)
AAAAAA
None
5 (2.4G)
Network Na TP-LINK_A
Link Status
Site Survey
Statistics
WPS
About
AP List SSID
TP-LINK_A 34567_TEST abcdef_0903 AAAAAA
BSSID
72 - 10 -18 - 01 - 00 - 03 02 - 10 -18 - 01 - 00 - 02 00 - 51 - E1 - 02 - 20 - 44 00 - 10 -18 - A9 - 5D - 8D
Signal
Channel
5 2 7 29
6 2 149 5
Authe…
Encr… Network Type
WPA2- PS AES WPA2- PS AES Open NONE Open NONE
Infrastructure Infrastructure Infrastructure Infrastructure
34567_TEST
Disconnected ! !
RESCAN
CONNECT
ADD PROFILE
Option 2: Via Wi-Fi Protected Setup (WPS)
Option 2: Via Wi-Fi Protected Setup (WPS)
A: Press the WPS button on your router.
A: Press the WPS button on your router.
B: Within 2 minutes, press and hold the WPS button on the adapter until the following screen appears.
B: Within 2 minutes, press and hold the WPS button on the adapter until its LED starts to flash quickly.
Configuring the wireless network.
Connecting to the network…
C: When you are prompted “Successfully connected to the network by WPS!”, click OK.
Option 3: Via Windows Wireless Utility
C: When the adapter’s LED becomes solid on, it is connected to the network successfully by WPS. The WPS status can also be viewed on the WPS screen in TP-LINK Utility.
Click (Network icon) on the system tray, select your Wi-Fi network, and click Connect. Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows Wireless Utility. ©2015 TP-LINK
