Preview only show first 10 pages with watermark. For full document please download

Architectural Specification The Mflex Iq8 Is An Ultra

   EMBED

Share

Transcript

Architectural Specification The mFlex iQ8 is an ultra-compact full range foreground speaker for fixed installation. The cabinet houses an 8” mid/bass unit with a ferrite magnet structure, which is combined with a 1” compression driver on a 90⁰ x 70⁰ constant directivity horn flare. The flare                                can be rotated to allow installation in either landscape or portrait modes. The   cabinet has a low insertion pad free passive network; working in hybrid mode with the eFlex Q5 or D2.5 networked system management.       Mid bass: The enclosure is manufactured from 15mm birch plywood and coated in a water based textured paint finish, which is available in either black or white color options. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. HF: Frequency response: 1 off 1” compression driver 70 Hz – 20 KHz Sensitivity (1w/1m): 95 dB Power handling (RMS): 200 w Impedance (ohms): The iQ8 incorporates three bracket points located on, the cabinet rear panel, top panel and side panel. It also has eight M8 insert points to further aid installation options. Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP connectors. The cabinet is designed to be powered by the Inspired Audio eFlex Q5 or D2.5 which will power four cabinets per output channel while also providing DSP preset functions and full networked software control of operating parameters. The mFlex iQ8 can be combined with bass options from the reFlex product range to enhance bass response within an installed environment. 1 off 8” cone drivers Directivity: Operation mode: Connection: Wiring protocol (Passive): 8 ohms 90 ⁰ h x 70⁰ v Passive 2 off Neutrik NL4 MP linked 1+/- = Input 2+/- = Linked Weight (Packaged): Dimensions (mm): Packaged (mm): 9.5 Kg (10.1 Kg) Provisional 255 w x 425 h x 230 d 270 w x 450 h x 245 d Options: o A selection of mounting brackets (ISO 80 Plate) o M8 suspension eyebolts o Black or white paint finishes Inspired Audio Products are designed and manufactured in England. For Technical support: E: [email protected] or visit the website W: www.inspired-audio.co.uk  Revision: R1 (05/03/2014)