Preview only show first 10 pages with watermark. For full document please download

Argent Sink Mounting Bracket Installation Instructions

   EMBED

Share

Transcript

Vitreous Sink Wall Mounting Bracket Product Number: 69210000 Installation Instructions Installation Recommendations Wall mounting bracket suitable for installation with Villeroy & Boch sinks Bracket is recommended to be installed onto the finished wall surface above the line of tiles – not recessed into the wall studs Bracket should be secured to wall studs (hardwood timber recommended) or to brick or block work (or similar structural material) If mounting to brick or block work ensure correct expansion plugs and matching sized screws are used; and are adequate to support the weight of the basin filled with water Note: Fixing bolts/screws are not supplied with bracket, as they need to be matched to the specific installation situation (bolt holes on bracket are Ø10mm) Installation Guidelines 1. Mark position for all four screw holes to be drilled – ensure there is adequate support timber and that fixings are suitable to accommodate basin weight including water 2. Drill holes to match the fixings to be used 3. Secure bracket to wall surface and ensure bracket is level 4. Fit the waste and overflow (if applicable) to basin prior to fixing to bracket 5. Secure basin to bracket with a high quality flexible sealant Wall Mounting Bracket Installation Instructions Page 1 of 1