Transcript
Arista Xtender™ ARD-1001 Multi-input/output VGA Digital Extender
The Arista Xtender™ ARD-1001 is a multi-input/output VGA video extender that extends video, mouse and serial signals up to 1,000 ft (300m) over a single CAT 5e/6 cable. ARD1001 supports VGA video at resolution up to 1920x1080 at 60Hz. Users can use serial touch, USB or PS/2 keyboard and mouse remotely. The ARD-1001 also incorporates gain and EQ rotary knobs, which let users fine tune the extended VGA signal to achieve the best display quality.
Application
• Hospitality
• Hospital
• Resorts
• Control room
• Entertainment Venues and Events
• Public information
• Houses of Worship
• Digital Signage.
• Local and remote education Key Features
• Transmission distances of up to 1000 feet (300m).
Local Host
• Support 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i VGA input. RS-232 IN
USB UPSTREAM
• Using single CAT5e/6cable to extend digital signal, low-cost.
VGA IN
• 1 VGA loop back at Tx. • No software is required, easy installation, and supports plugand-play. • Perfect image quality, strong anti-interference performance, image clarity and brightness are adjustable. DC IN
VGA OUT
LOCAL OUT
POWER INDICATOR
• Supports RS-232 half-duplex. • Adjustable equalization on remote display. • Adjustable gain control on remote display.
Remote Display
• De-skew compensation available for RGB delay control. • Compact design. RS-232
USB VGA OUT DOWNSTREAM
PS/2 KB, MOUSE
• Wall mounting/DIN-Rail mounting for better stability. • Supports PC, SUN, MAC or ELINX switch with VGA video. • Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. • Built-in lightning and surge protection.
DC IN
REMOTE IN EQ
GAIN 0~7
- or +
• Super interference rejection.
Arista Xtender™ ARD-1001 Multi-input/output VGA Digital Extender
Specifications Model Name
ARD-1001
RJ-45 connector
WE/SS 8P8C with 2 LED indicators
Technical
Local Host
Remote Display
RS-232 connector
DB-9 [9-pin D-sub female]
Role of usage
Receiver (RX)
Keyboard and mouse connector PS/2 Connector
1xRJ-45
USB connector
Video bandwidth
Transmitter (TX) 1xVGA,1 x USB, 1xRS-232 1xRJ-45, 1xVGA Loop-Back 350MHz
Input Output
1xVGA, 1xRS-232, 1xPS/2, 2xUSB
Transimission
FHD[1920x1080]-1000ft (300m) [CAT5e/6]
Audio support
No
RS-232 signal type
Half-duplex & baud rate
Input video signal
1.2 Volts [peak-to-peak]
Equalization
Continuous analog control
RGB delay control
Yes
Loop-Back
1 VGA loop-Back at TX [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset — ±8kV 4-layer board [impedance control — differential 100Ω; single 50Ω] HD-15 [15-pin D-sub female]
ESD protection PCB stack-up VGA connector Local Host Line Drawing
Mounting
Wall mount or DIN-RAIL mount
Dimension (LxWxH)
6.19x4.04x1.45inch/157x103x37mm
Power supply
9V to 36V DC
Operation consumption
5 Watts [max]
Operation temperature
0~50°C (32~122°F)
Storage temperature
-20~60°C (-4~140°F)
Relative humidity
20~90% RH [no condensation]
Package Contents
1 x ARD-1001 Local Host 1 x ARD-1001 Remote Display 2 x 100-220VAC Input/12VDC Output power adapter 1 x 6 feet modeling RS-232 cable (male to male) 1 x 6 feet modeling VGA cable (male to male) 1 x 6 feet modeling RS-232 cable (male to female)
Remote Display Line Drawing
1.45 [37]
1.45 [37]
5.12 [130] 6.19 [157]
5.12 [130] 6.19 [157] 5.65 [144]
4.04 [103]
2X 2.76 [70]
USB 2.0 Type A connector
Mechanical
5.65 [144]
4.04 [103]
1.40 [36]
2.76 [70]
1.40 [36] 4X R.18 [5]
4X Φ35 [9]
8X R.09 [2]
8X Φ18 [5]
Typical installation diagram
Tx
Rx
Arista Xtender™ ARD-1002A Multi-input/output HDMI Digital Extender
The Arista XtenderTM ARD-1002A is a multi-input/output HDMI video /audio extender that extends video, audio, mouse, serial and IR signals up to 246 ft (75m) over a single CAT 5e/6 cable. ARD-1002A supports HDMI video at resolution up to 1920x1080 @60Hz. Users can use serial touch, USB touch*, USB or PS/2 keyboard and mouse remotely. *USB touch is only supported in Windows HID.
Application
• Hospitality
• Hospital
• Resorts
• Control room
• Entertainment Venues and Events
• Public information
• Houses of Worship
• Digital Signage.
• Local and remote education Key Features
Local Host
• HDMI digital video and audio signal transmission distance up to 246ft (75m) via CAT5e/6. RS-232 IN
USB UPSTREAM HDMI IN
• Support 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i HDMI input. • Using single CAT5e/6cable to extend digital signal, low-cost. • Supporting video, audio, DDC, and HDCP KEY extending together. • 1 HDMI loop back at Tx.
DC IN
HDMI OUT
LOCAL OUT
• Locking HDMI cable for better cable stability. • No software required, easy installation, support hot-plug. • Supports RS-232 full-duplex.
Remote Display
• Supports USB or PS/2 keyboard and mouse. • Compact design. RS-232 OUT USB HDMI OUT USB PS/2 OUT DOWNSTREAM
• Wall mounting/DIN-Rail mounting for better stability. • Supports a PC, SUN, MAC or some other devices with HDMI video. • Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. • Built-in lightning & surge protection.
DC IN
REMOTE IN
• Super interference rejection.
Arista Xtender™ ARD-1002A Multi-input/output HDMI Digital Extender
Specifications Model Name
ARD-1002A
Technical
Local Host
Remote Display
USB connector
Role of usage
Receiver (RX)
Mechanical
Video bandwidth
Transmitter (TX) 1xHDMI, 1xUSB 1xRS-232 1xRJ-45, 1xIR 1xHDMI Loop Back 350MHz
Transimission
FHD[1920x1080]-246ft (75m) [CAT5e/6]
Audio support
Yes
RS-232 signal type
Full-duplex & baud rate
Input video signal
1.2 Volts [peak-to-peak]
Loop-out
HDMI connector
1 HDMI loop-out at TX [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset — ±8kV 6-layer board [impedance control — differential 100Ω; single 50Ω] Locking HDMI female cable
RJ-45 connector
WE/SS 8P8C with 2 LED indicators
RS-232 connector
DB-9 [9-pin D-sub female]
Input Output
ESD protection PCB stack-up
Keyboard and mouse connector PS/2 Connector
1xRJ-45, 1xIR 1xHDMI, 1xRS-232 1xPS/2 Jack, 2xUSB
Local Host Line Drawing
Mounting
Wall mount or DIN-RAIL mount
Dimension (LxWxH)
6.19x4.04x1.45inch/157x103x37mm
Power supply
9V to 36V DC
Operation consumption
5 Watts [max]
Operation temperature
0~50°C (32~122°F)
Storage temperature
-20~60°C (-4~140°F)
Relative humidity
20~90% RH [no condensation]
Package Contents
1 x ARD-1002A Local Host 1 x ARD-1002A Remote Display 2 x 100-220VAC Input/ 12VDC output power adapter 1 x 6 feet modeling RS-232 cable (male to male) 1 x 6 feet modeling RS-232 cable (male to female) 1 x 6 feet modeling HDMI cables (male to female) 1 x 6 feet USB Type A to Type A cable
Remote Display Line Drawing
1.45 [37]
1.45 [37]
5.12 [130] 6.19 [157] 5.65 [144]
5.12 [130] 6.19 [157] 5.65 [144]
4.04 [103]
2.76 [70]
4.04 [103]
1.40 [36]
8X R.18 [5] 8X R.09 [2]
Typical installation diagram
USB 2.0 Type A connector
2.76 [70]
1.40 [36]
8X R.18 [5] 8X R.09 [2]
Arista Xtender™ ARD-1002B Multi-input/output HDMI Digital Extender over fiber
The Arista Xtender™ ARD-1002B is a multi-input/output HDMI video /audio extender that extends video, audio, mouse, and serial signals up to 10,000 ft (3km) over a single fiber cable. ARD-1002B supports HDMI video at resolution up to 1920x1080 at 60Hz. Users can use serial touch, USB or PS/2 keyboard and mouse remotely.
Application
• Rental & Staging
• Distance learning
• Auditoriums
• Surgical or medical imaging and more
• Stadiums and Theaters • Public transportation hubs
Key Features
Local Host
• HDMI signal transmission distances of up to 10,000ft (3km). RS-232 IN
USB UPSTREAM
HDMI IN
• Supports 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i HDMI signal input. • Locking HDMI cable for better cable stability. • Using single optical fiber cable to extend digital signal, lowcost, faster transmission rate and smaller attenuation. • Supports video, audio, DDC, and HDCP KEY extending together.
DC IN
HDMI LOCAL Out
FIBER OUT LINK LED
• 1 HDMI loop back at Tx. • Locking HDMI cable for better cable stability. • Supports the touch screen and keyboard/mouse signal transmission.
Remote Display
• No software is required, easy installation, supports hot-plug and RS-232 full-duplex. RS-232
HDMI OUT USB PS/2 DOWNSTREAM
• Compact design. • Wall mounting/DIN-Rail mounting for better stability. • Supports a PC, SUN, MAC or other devices with HDMI video. • Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS.
DC IN
FIBER IN
LINK LED
• Built-in lightning & surge protection, super interference rejection.
Arista Xtender™ ARD-1002B Multi-input/output HDMI Digital Extender over fiber
Specifications Model Name
ARD-1002B
Technical
Local Host
Role of usage
USB connector
Audio support
Transmitter (TX) Receiver (RX) 1x HDMI, 1xUSB, 1xOptical port 1x RS-232 1x Optical port, 1x HDMI, 1xRS-232, 1x HDMI Loop-Back 1x PS/2, 2xUSB 350MHz FHD 1920x1080-10,000ft (3km) [Optical fiber cable] Yes
RS-232 signal type
Full-duplex & baud rate
Input video signal
1.2 Volts [peak-to-peak]
Loop-out
1 HDMI loop-out at TX [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset — ±8kV 6-layer board [impedance control — differential 100Ω; single 50Ω]
Input Output Video bandwidth Transimission
ESD protection PCB stack-up
RS-232 connector Remote Display
HDMI connector
Locking HDMI female cable
Optical connector
SFP standard, Dual-mode, 10G
Local Host Line Drawing
DB-9 [9-pin D-sub female]
Keyboard and mouse connector PS/2 connector USB 2.0 Type A connector
Mechanical Mounting
Wall mount or DIN-RAIL mount
Dimension (LxWxH)
6.19x4.04x1.45inch/157x103x37mm
Power supply
9V to 36V DC
Operation consumption
5 Watts [max]
Operation temperature
0~50°C (32~122°F)
Storage temperature
-20~60°C (-4~140°F)
Relative humidity
20~90% RH [no condensation]
Package Contents
1 x ARD-1002B Local Host; 1 x ARD-1002B Remote Display, 2 x 100~220VAC input / 12VDC output power adapter 1 x 6 feet modeling RS-232 cable (male to male) 1 x 6 feet modeling RS-232 cable (male to female) 1 x 6 feet modeling HDMI cables (male to female) 1 x 6 feet USB Type A to Type A cable
Remote Display Line Drawing
1.45 [37]
1.45 [37] 5.12 [130] 6.19 [157]
5.12 [130]
5.65 [144]
5.65 [144]
6.19 [157]
4.04 2.76 1.40 [103] [70] [36]
4.04 2.76 1.40 [103] [70] [36]
4X Φ35 [9] 8X Φ18 [4,5]
4X Φ35 [9] 8X Φ18 [4,5]
Typical installation diagram
Tx
Rx
Arista Xtender™ ARD-1003 USB Digital Extender
The Arista Xtender™ ARD-1003 is a USB extender that extends all types of USB 2.0 devices such as flash drives, keyboards, mice, webcams and interactive whiteboards up to 330 ft (100m) over a single CAT 5e/6 cable. No software needed, true plug-and-play.
Application
• Remote Desktop • Control room (keyboard/mouse) Extension • Professional Audio-visual • Security • Surgical or medical imaging • Industrial control and more • Digital Signage control
Key Features
Local Host
• USB 2.0 signal transmission distance up to 330ft (100m). USB UPSTREAM
• 1 USB input and 4 USB inputs all in USB 2.0 Type A connecter. • Using single CAT5/CAT5E/CAT6 cable to extend digital signal, low-cost. • Supporting High-Speed, Full-Speed or Low-Speed USB2.0 device.
DC IN
LOCAL OUT
• No software required, easy installation, support hot-plug. • Compact design. • Wall mounting/DIN-Rail mounting for better stability. • Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS.
Remote Display
• Built-in lightning & surge protection. USB DOWNSTREAM
DC IN
REMOTE IN
• Super interference rejection.
Arista Xtender™ ARD-1003 USB Digital Extender
Specifications Model Name
ARD-1003
Technical
Local Host
Remote Display
Role of usage
Transmitter (TX)
Receiver (RX)
Input
1xUSB upstream
1xRJ-45
Output
1xRJ-45 4xUSB downstream USB 1.0, USB 1.1, USB 2.0; Low-Speed, Full-Speed or High-Speed CAT5e/6 up to 330ft (100m) [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]; [2] Core chipset — ±8kV 6-layer board [impedance control — differential 100Ω; single 50Ω] WE/SS 8P8C with 2 LED indicators
USB device Transimission ESD protection PCB stack-up RJ-45 connector Local Host Line Drawing
Keyboard and mouse connector USB interface USB connector USB 2.0 Type A connector Mechanical Mounting
Wall mount or DIN-RAIL mount
Dimension (LxWxH)
6.19x4.04x1.45inch/157x103x37mm
Power supply
9V to 36V DC
Power consumption
5 Watts [max]
Operation temperature
0~50°C (32~122°F)
Storage temperature
-20~60°C (-4~140°F)
Relative humidity
20~90% RH [no condensation]
Package Contents
1 x ARD-1003 Local Host; 1 x ARD-1003 Remote Display, 2 x 100~220VAC input / 12VDC output power adapter
Remote Display Line Drawing
1.45 [37]
1.45 [37] 5.12 [130]
5.12 [130]
6.19 [157.2]
6.19 [157] 5.65 [144]
5.65 [143.6]
4.04 [103]
2.76 [70]
1.40 [36]
4.04 [103]
4X Φ35 [9] 8X Φ18 [4,5]
Typical installation diagram
2.76 [70]
1.40 [36]
4X R.18 [4,5] 4X R.09 [2,3]
Arista Xtender™ ARD-1005 DVI Digital Extender with PoE
The Arista XtenderTM ARD-1005 is a DVI/HDMI video/audio extender that extends video and audio signals up to 246 ft (75m) over a single CAT 5e/6 cable and is PoE powered. ARD-1005 supports DVI video signal, and HDMI video signal* at resolution up to 1920x1080 at 60Hz. * through adapter. No audio signal.
Application
• Hospitality
• Hospital
• Resorts
• Control room
• Entertainment Venues and Events
• Public information
• Houses of Worship
• Digital Signage.
• Local and remote education
Key Features
• DVI signal transmission distances of up to 246ft (75m). • Power over Ethernet. • Supports 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i signal input. • Just using a CAT5E/CAT6 LAN cable to extend digital signal, low-cost, faster transmission rate and smaller attenuation. LOCAL DVI IN
OUTPUT
• Compact design. • No software is required, easy to use, supports hot-plug. • Simply insert into device for better stability • Supports a PC, SUN, MAC or other devices with DVI signal video. • Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. • Built-in lightning & surge protection, super interference rejection.
DVI OUT
REMOTE IN
Arista Xtender™ ARD-1005 DVI Digital Extender with PoE
Specifications Model Name
ARD-1005
Technical
Local Host
Remote Display
Role of usage
Receiver (RX)
Mechanical
1xRemote RJ-45 IN
Dimension (LxWxH)
Output
Transmitter (TX) 1xLocal DVI IN 1xDC 48V Input 1xLocal RJ-45
1xRemote DVI OUT
Power supply
3.80 x 3.99 x 1.02 inch / 96.5 x 101.3 x 26.0 mm DC IN 48V
Video bandwidth
350MHz
Power consumption
5 Watts [max]
Transimission
FHD 1920x1080-246ft (75m) [CAT5e/6]
Operation temperature
0~50°C (32~122°F)
Storage temperature
-20~60°C (-4~140°F)
Relative humidity
20~90% RH [no condensation]
Package Contents
1 x ARD-1005 Local Host; 1 x ARD-1005 Remote Display, 1 x 48VDC output power adapter
Input
Audio support
No
Input video signal
1.2 Volts [peak-to-peak] [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]; [2] Core chipset — ±8kV
ESD protection
Local Host Line Drawing
6-layer board [impedance control — differential 100Ω; single 50Ω]
PCB stack-up
Remote Display Line Drawing
1.02 [26]
1.02 [26]
.78 [19,8]
1.81 [46]
.78 [19,8]
1.81 [46]
2.46 [62,5]
2.46 [62,5]
1,01 [25,6]
3.99 [101,3]
3.99 [101,3]
2,20 [55,9]
2.20 [55,9]
3,33 [84,5] 3.33 [84,5]
3,80 [96,5]
3.80 [96,5]
Typical installation diagram
Tx
Rx
