Asd11n4t Datasheet (rs232-rs485 Niagara)

Transcript

Niagara serial interface Technical Data Sheet ASD11N4T WEMS Wireless Interface - N Data Sheet Version 2.0 Product Description + - GND A The WEMS Wireless Interface - N Module is used in conjunction with the WEMS Direct driver for NiagaraAX. The interface module connects via RS485 to the JACE so can be mounted some distance away from the JACE unit itself, enabling optimisation of the wireless signal strength. B A B RS485 Wireless The WEMS Direct driver enables WEMS wireless devices to be discovered and used within the NiagaraAX Framework, in the same way as if wired network I/O modules were connected. All configuration is achieved through the WorkPlaceAX tool. The driver supports the implementation of hopping to extend the range of wireless network. Please refer to the WEMS Direct Driver for NiagaraAX User Guide for more information. Serial Serial Interface The ASD11N4T is purchased together with a driver activation code, which enables the driver to be licensed. Power The current version is compatible with all WEMS wireless I/O modules and sensors apart from the MX modular range. Features Specifications • Transparent serial network wireless 'bridge' Operating Temperature Range Operating Humidity Storage Temperature Storage Humidity Cooling -10 to +50 DegC < 75% RH (Non condensating) -20 to +85 DegC < 90% RH (Non condensating) Convection Supply Voltage Current Consumption 5 VDC (regulated) 200mA max 3W (13mA) Antenna Connector Antenna Female 50Ω SMA (SubMiniature version A) RF Frequency RF Output RF Sensitivity RF Bandwidth RF Channels 433.05 - 434.79MHz 8dBm max -115dBm 25kHz (Narrow band) 69 Weight Enclosure Terminal Covers Mounting 216g (Without antenna) UL94-VO flame retardant PC, IP20 rated UL94-VO, IP20 finger protection 35mm DIN rail (EN 50022, BS 5584, DIN 46277-3) or direct surface mount. Optional adaptor for G rail mounting • Supports many serial protocols when used with a NiagaraAX Framework serial driver running on a JACE/Hawk/EC-BOS • High performance wireless narrow band operation • Up to 1km line-of-sight range • License-free use • 69 selectable RF channels • Low power consumption • Status LEDs • 5V DC powered • DIN rail mount Compliance EMC EN 301489-1: 2008 EN 55022: 2006 EN 61000-4-3: 2006 EN 61000-4-2: 2001 EN 61000-4-4: 2004 EN 61000-4-5: 2006 EN 61000-4-6: 2005 EN 61000-4-11: 2004 EN 61000-3-3: 1995 i For product operation and installation information please refer to the WEMS Serial Interface Module user manual. Dimensions 26.50 mm 32.00 mm + - GND A B A B RS485 Serial Serial Interface Power 48.00 mm 58.00 mm 90.00 mm 62.00 mm Wireless 45.50 mm 90.00 mm Wireless EU R&TTE directive for 25kHz EN 300 220: EMC standard for short range devices EN 301 489: EMC standard for radio equipment and services ASD11N4T Safety EN 60950: Information technology equipment EN 60730: Automatic electrical controls EN 50366: Domestic equipment 26.50 mm 53.00 mm ASD11N4T WEMS Wireless Interface - N Data Sheet Version 2.0 Copyright © 2015 WEMSinternational (WEMS). All rights reserved. Product specifications and descriptions are subject to change without notice. 09/06/11 AJS www.wems.co.uk