Transcript
2
OPTIONAL ACCESSORIES
1
SHREDDER KIT
R
P/N 890209. Shreds leaves, dramatically reducing total volume.
HOSE KITS For vacuuming in hard to reach areas.
Heavy Duty Vacuum Hose Kit P/N 900943. 4"(102mm) x 10' (3.05m) Homeowners Vacuum Hose Kit P/N 900942. 4"(102mm) x 10' (3.05m) NOZZLE WEAR PLATES P/N 890413. Extends nozzle life when used along curbs and hard surfaces.
STANDARD TURF QUICK DEBRIS BAG P/N 890307. Standard on TKD models. For use in leaves and grass in non-dusty conditions.
OPTIONAL DEBRIS BAGS QUICK DEBRIS BAG P/N 890305 for use in dusty conditions.
DEBRIS BAG COVER P/N 900801 Directs dust downward away from operator.
ZIPPERLESS QUICK BAG P/N 890309 For non dusty
T h a n k Yo u f o r S e l e c t i n g
The Powerful KD or TKD TERMITE® SELF PROPELLED VACUUM CHIPPER
Operator Owner's Manual KD510SP, TKD510SP
conditions that are damaging to zippers.
Specifications
3
ENGINE:H.P. ENGINE:TYPE ENGINE:FUEL CAP. ENGINE:OIL CAP. WEIGHT:UNIT WEIGHT:SHIPPING ENGINE WEIGHT:
UNIT SIZE:
Part No. 890424
KD510SP 5.5 (4.1kW) B&S DIAMOND I/C 1.5qt. (1.4L) 0.63qt. (0.6L) 117# (53.1 kg) 140# (63.5 kg) 26# (11.8 kg)
TKD510SP 5.5 (4.1kW) B&S DIAMOND I/C 1.5qt. (1.4L) 0.63qt. (0.6L) 133# (60.3 kg) 156# (70.8 kg) 26# (11.8 kg)
OVERALL LENGTH: 62"(1.57m) OVERALL WIDTH 26.75" (0.68m)
Page 1 of 12
OVERALL HEIGHT 42" (1.07m)
Form No. F011398A
18 R
Part No. 890424
PARTS DRAWING
KD510SP, TKD510SP
Page 10 of 12
Form No. F011398A
19
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85
Part No. 890424
KD510SP Description Part No. Debris Bag Turf (service) 890305 Throttle Assembly (INCL. 1 ea. 4,10) 900514-04 Tamper Nut Lock (1/4 - 20) *8160001 Screw Cap (1/4 - 20 x 1- 1/2 HEX) *8041008 Handle Assy' (incl. items 4(6), 5(4), 11(2), 75(2), 76 & 99) 900057 Axle Rear - Frame W.A. 890389 Screw Handle 5/16 - 18 x 2-1/4 900547 Clamp Cable Plastic 1" 900813 Screw Cap (1/4 - 20 x 2- 1/4) *8041011 Bar Support Bag 900039 Door Exhaust Assy' (incl. item 62) 890148 Bolt - Carriage 1/4 x 3/4 8024021 Screw Cap #10 - 24 x 5/8 *8059135 Nut Lock #10 NC *8164005 Washer 1/4 FC ZP *8171002
Qty. 1 1 8 6 1 1 2 2 1 2 1 2 5 5 2
TKD510SP Part No. 890307 900514-04 890229 *8160001 *8041008 900059 890389 900547 900813 *8041011 900039 890148 8024021 *8059135 *8164005 *8171002
Qty. 1 1 1 8 6 1 1 2 2 1 2 1 2 5 5 2
900932
1
900932
1
Spring Tire - Only (per assy') Treaded Pin - Hair Cotter Rod Short Height Adjustment Bolt - Carriage 5/16 - 18 x 4-1/2
900136 900659 900471 890110 *8024054
1 1 1 1 4
900136 900659 900471 890110 *8024054
1 1 1 1 4
Nut Lock 5/16 - 18 HEX Handle Lower KD505 Plate Handle Support Label Danger Cut Finger Washer Flat Cut 5/16 Screw Cap 3/8 - 16 x 2-1/2 Washer Face
*8160002 900041 900933 *8171003 900564
4 1 1 2 2
*8160002 900041 900933 400424 *8171003 900564
4 1 1 2 2 2
Wheel Ass'y Cast (incl. items 21) treaded Washer 0.75 "C"
900760 900997
2 1-0
900760 900997
2 1-0
Label Ear Eye Breathing
890254
1
890254
1
Screw Cap 1/4 - 20 x 1-1/4
*8041007
4
*8041007
4
Screw Self Tapping 10 - 24 x 1/2 Nozzle Frame (incl. one of items 29,44,42,55,64) Plug Label Oil Chain Blade Chipper Impeller Ass'y (incl items 46, 49, 50, 51, 59, 65, 66, 67) Impeller Ass'y (incl items 49, 50, 51) Label Chipper Key 3/16 Sq. x 1.25 Washer Lock 3/8 Twisted Tooth Screw Cap 3/8 - 24 x 2" (Torque 50 ft.lbs (68 Nm)) Screw Cap 3/8-24 x 1 1/2" (Torque 50 ft.lbs.(68 Nm)) Housing Ass'y (incl. items 12, 14, 15, 16, 37, 100) Engine 5.5 H.P. Briggs & Stratton Diamond I/C
*8123086 890391 900146 830502 900342 9201080 400502 900344 890419 900784
2 1 1 1 1 1 1 1 1 1
*8123086 890391 900146 830502 890101 890208-S 890152 9201080 400502 810962 890419 900784
2 1 1 1 1 1 1 1 1 1 1 1
Washer Flat 1/2 SAE Screw Socket HD. 5/16 - 18 x 3/4 GR. 8 Height Adjustment Ass'y
*8172011 890326
4 1
*8172011 890103 890326
4 2 1
Label Danger Flying Material Label Hot Engine
810736 400268
1 1
810736 400268
1 1
Nut Keps 5/16 - 18 Washer Shim 0.060" (1.52mm) Washer Shim 0.020" (0.51mm) Plate Top Ass'y (incl. items 14, 15, 29, 69, 70, 71, 84) Plate Top Ass'y (incl. items 29, 71, 84) Guard Flapper Plate Flapper Entrance Screw Cap 1/4-20 x 1/2 HWH
890402 890359
1 17
890104 890130 890131 890425 890119 890127 890359
2 0-1 0-2 1 1 2 2 17
890108 *8161041 400570
2 2 2
890108 *8161041 400570 890167
2 2 2 1
1/2-13 CAP NUT NP W/PATCH
890530
4
890530
4
Connector Quick
890176
1
890176
1
Cable Ass'y Clutch
900207
1
900207
1
Bracket - Height Adjustment
Knob Wing 5/16-18 Nut Lock5/16 - 18 Thin Ht. Grip Handle Bracket Lopper Loop
Page 11 of 12
* Denotes standard hardware item that may be purchased locally.
Form No. F011398A
Item No. 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123
19 PARTS LIST ( Continued from page 11 )
KD510SP Part No. 890242 890239 900323 *8171003 *8024039 *8177011 *8142002 900320 890238 800505 *8181007 890197 890190 830503 900327 900317 900321
Qty. 2 2 1 4 4 4 4 1 1 5 5 1 1 1 1 2 2
TKD510SP Part No. 890242 890239 900323 *8171003 *8024039 *8177011 *8142002 900320 890238 800505 *8181007 890197 890190 830503 900327 900317 900321
Qty. 2 2 1 4 4 4 4 1 1 5 5 1 1 1 1 2 2
900970
1
900970
1
Sprocket - 17 Tooth Sprocket - 8 Tooth Roll Pin 3/16 Dia. x 1 1/4 Lg. Locknut 5/16 - 18 Flange
900303 900302 *8195166 850164
1 2 4 5
900303 900302 *8195166 850164
1 2 4 5
Bracket Control Ass'y (incl. 113, 114, 115) Spring Roll Pin 1/8" Dia. x 1 1/4 Lg. Rod Clutch Screw Cap 1/4-20 x 1" Lg. Washer 1/4" Flat (5/16 ID x 3/4 Od x 1/16) Guard Chain Ass'y TKDSP Clip - Clutch Cable
900221 900136 *9195106 900208 *8041006 *8171002 890231 900999
1 1 1 1 2 4 1 1
900221 900136 *9195106 900208 *8041006 *8171002 890195 900999
1 1 1 1 2 4 1 1
Clutch Double Release
900307
1
900307
1
Label Read Owner's Manual
890301
1
890301
1
Description Wheel With Sprocket Ass'y Cast ( 21, 94, 95, 96) Chain 52 Pitch Chain 40 Pitch Washer Flat 5/16 (3/8 ID x 7/8 x 1 1/6) Bolt Carriage 5/16 - 18 x 3/4 Washer Spring Lock 5/16 Nut Regular 5/16 - 18 Jackshaft Sprocket (per Assemby) (size # 65A26) 26 Teeth Screw Self Tap 1/4-14 x 3/4 (Per Assembly) Washer Lock External Tooth (Per Assembly) Jackshaft Ass'y (incl. 93, 101, 102, 107, 108, 109) Shield Muffler TKDSP Label Clutch Label - Warning Guards Bearing Plate Bearing Ball (with Snap Ring) Rod Bail Clutch
TROUBLESHOOTING
20
Problem
Before Requesting Service Review These Suggestions Possible Cause
Solution
Will not vacuum or has poor vacuum performance.
Dirty debris bag. Nozzle height set too high or too low. Hose kit cap missing. Clogged nozzle or exhaust. Excessive quantity of debris.
Poor chipping performance.
Extremely hard wood. Dull or damaged chipper blade.
Clean debris bag. Shake bag clean or wash. Adjust nozzle height. Check for hose kit cap. Unclog nozzle or exhaust (see page 5). Allow air to feed with debris. Avoid extremely hard wood. Sharpen or replace chipper blade (see page 8).
Engine stalls or labors when chipping. Abnormal vibration.
Feeding branches into chipper too rapidly. Engine service may be required. Loose or out of balance impeller or loose engine.
Check impeller and replace if required. Check Engine.
Engine will not start.
Throttle in off position. Out of gasoline. Bad or old gasoline. Spark Plug wire disconnected. Dirty air cleaner.
Check stop switches, throttle, and gasoline. Connect spark plug wire. Clean or replace air cleaner. Or contact a qualified service person.
No self propelling.
Operator's bail not releasing clutch. Broken or out of adjustment clutch cable. Worn or broken clutch assembly. Bracket control assembly (item 112) out of adjustment. Clutch cable out of adjustment. Clutch not lubricated and is lockedup. Debris locked in chipper blade, hopper or inside impeller. Engine problem.
Adjust clutch cable. Adjust bracket control assembly. Replace any worn or damaged or malfunctioning parts.
Self propelled drive will not release. Engine is locked, will not pull over.
22.1
21
L
Record your machine model, serial number
97
22
The Machine should be taken to the dealer from whom it was purchased or to an authorized Billy Goat dealer.
1803 S. Jefferson P.O. Box 308 Lee's Summit, MO 64063 / USA Tel (816) 524-9666 Fax (816) 524-6983
R
Model
See page 5, Clearing a clogged chipper hopper. Contact an engine servicing dealer for engine problems.
Please fill in the WARRANTY CARD and send the upper part to Billy Goat. The WARRANTY terms are stated on the lower part which remains with the user. Whenever a Billy Goat Machine is faulty due to a defect in material and / or workmanship, the owner should make a warranty claim as follows:
and date-of-purchase and where purchased
A
Adjust clutch cable. See page 9 Clutch Adjustment. Oil clutch.
WARRANTY PROCEDURE
Engine Service and Warranty Contact your nearest engine manufacturer's authorized servicing dealer.
Serial Plate
Feed branches at a slower rate. Service engine.
The owner should present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt. The Warranty Claim will be filled in by the authorized Billy Goat Dealer, who will send it with the faulty part to Billy Goat headquarters.
Serial No.
The Quality / Service department at Billy Goat headquarters will study the claim and parts and will notify their conclusions.
LpA
109
Unit(Weight) lbs.
kg
Part No. 890424
kW
rpm
min-1
Operator
Purchase Date
The decision by the Quality / Service department at Billy Goat headquarters to approve or reject a Warranty claim is final and binding.
Engine Power
Purchased from
Note: To process a Warranty Claim, it is necessary to quote the Model & Serial number who are printed on the Billy Goat Serial Plate.
R
Page 12 of 12
BILLY GOAT INDUSTRIES INC. P.O. BOX 308 (1803 S JEFFERSON) LEE'S SUMMIT, MO 64063 / USA PHONE: 816-524-9666 FAX: 816-524-6983
Form No. F011398A
