Preview only show first 10 pages with watermark. For full document please download

Assembly Guide - Virgin Musical Instruments

   EMBED

Share

Transcript

ASSEMBLY GUIDE HD-3 Electronic Drum Kit EASY ASSEMBLY GUIDE IF YOU HAVE ANY QUESTIONS CALL OUR TOLL FREE HELPLINE 888-998-9848 DO NOT RETURN TO THE STORE UNBOXING YOUR DRUM KIT 1. Carefully unpack all contents of box (1) Crash Cymbal (1) Ride Cymbal (1) Hi-Hat Cymbal (3) Tom Drums (1) Sound Module (1) Snare Drum Kick Pedal Hi-Hat Control Pedal Drum Kit Components Cymbal Arms Cymbals Drum Frame Snare Toms TO CRASH TO TOM1 TO RIDE TO TOM2 TOM3 TO HH TOM1 SNARE HH KICK HHC TO KICK CRASH TO SNARE RIDE TO TOM3 TOM2 AUX IN USB MASTER OUT TO HOST Not Pictured: (1) Labeled Wiring Harness (1) Pair Drumsticks (1) Drumstick Holder Velcro Strips Sound Module Hi-Hat Control Pedal Kick Pedal DRUM KIT ASSEMBLY 2. Attach the cymbal arms to the drum frame indicated positions . 4. Align the holes in Snare Drum Pad and the three Tom Drum Pads and insert them into the pole on the Drum Frame as shown. 3. Attach the cymbals to the cymbal arms as shown. 5. Attach the Drum Pads in the positions hown below. DRUM KIT ASSEMBLY (CON’T) 6. Insert the rod of sound module stand into the Drum Frame clamp as shown, then tighten. 7. Please put Hi-hat control pedal on the left and Kick pedal on the right. DRUM KIT WIRING DIAGRAM 8. Connect the wiring harness to the interface at the bottom of the drum sound module, then connect the labeled cables to their corresponding drum pads, cymbals and pedals, as show below. Drum Module Connector Panel CRASH CRASH RIDE Hi-hat control Hi-hat Hi-hat TOM3 RIDE RIDE CRASH HH HHC MASTER OUT TOM2 TOM1 SNARE KICK AUX IN TOM1 USB TO HOST TOM2 TOM3 SNARE TOM3 TOM2 TOM1 SNARE KICK Hi-hat control KICK DRUM THRONE ASSEMBLY 9. Extend the drum throne legs and secure the legs with the wingut. (fig 1) Fasten the drum throne stool to the height adjustment rod and secure the stool with the wingnut. (fig 2) Set up the drum throne at the desired height as shown below. (fig 3) (fig. 1) (fig. 2) (fig. 3) 10. Attach the included power supply adapter and the headphones to drum sound module connector panel. POWER ON OFF DC 9V 17 PHONES 18 AC POWER If you have any questions about your drum kit please contact us toll free 888-998-9848 Virgin (VMI) is the Parent Company of Hitman Drums Virgin Musical Instrument Company PO BOX 2908 LA MESA, CA 91943 [email protected] www.virginmusicalinstruments.com