Transcript
MS1071T0TX-ESPRESSO FINISH MS1072T0TX-WHITE FINISH MS1068T0TX-BLACK SLIDING-DOOR WINDOW-PANE MEDIA CABINET
Assembly Instruction
For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096
[email protected] www.seidal.com
MS1071T0TX-ESPRESSO FINISH/MS1072T0TX-WHITE FINISH MS1068T0TX-BLACK SLIDING-DOOR WINDOW-PANE MEDIA CABINET Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below.You may receive extra hardware with your unit.
A
Quantity Of 1
TOP PANEL
B LEFT SIDE PANEL
D
Quantity Of 1
BASE
E
Quantity
F
Quantity Quantity Of Of23
H
RIGHT BACK PANEL
LEFT BACK PANEL
J
1
Quantity Of 1
RIGHT DOOR Quantity Of 10
3 CAM BOLT
Quantity Of 10
Quantity Of 4
BOLT
Quantity Of 32
8
Quantity Of 10
I
Quantity Of 1
LEFT DOOR
CAM LOCK
4
Quantity Of 4
ADJUSTABLE SHELVES Quantity Of 1
Of 1
Quantity Of 1
RIGHT SIDE PANEL
FIXED SHELVES
G
7
C
Quantity Of 1
Quantity Of 10
2 COTTON MAT
5
Quantity Of 4
6
Quantity Of16
BARREL NUT
SHELF SUPPORTS
9
10
Quantity Of 2
Quantity Of 2
SCREW 1/8”x1/2” DOWEL Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish
SCREW 5/32”x1-3/4” PLASTIC ANCHOR For replacement parts or questions, please call Customer Service at 1-800-633-5096. Do not return product to store. Please call
on wood part. Avoid rubbing or Scratching the surface with rough or abrasive objects.
manufacturer for assistance, questions or parts.
Assembly Tool Required No.2 Phillips Screw driver
MS1071T0TX-ESPRESSO FINISH MS1072T0TX-WHITE FINISH MS1068T0TX-BLACK SLIDING-DOOR WINDOW-PANE MEDIA CABINET
Assembly Instruction Step 1: PLEASE DO NOT OVER-TIGHTEN CAMBOLTS. PLEASE STOP WHEN YOU FEEL TIGHT PUT ALL PARTS ON A SOFT SURFACE TO PREVENT SCRATCHES. PLACE LEFT SIDE PANEL (B) SMOOTH SIDE ON FLAT SURFACE, THEN SCREW 2 CAM-BOLTS (3) INTO PRETHREADED INSERT HOLES ON SIDE PANEL (B) UNTIL STOP. (PLEASE DO NOT OVERTIGHTEN CAM-BOLTS). ALSO PUSH 2 WOOD DOWELS (8) INTO LARGE OPENING HOLES INTO LEFT SIDE PANEL (B). REPEAT SAME PROCEDURE FOR RIGHT SIDE PANEL (C). INSERT CAM-BOLTS (3), WOOD DOWELS (8) INTO PREDRILLED HOLES ON ENDS OF FIXED SHELVES (E) AND FIT INTO CORRESPONDING HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C). INSERT CAM-LOCKS (1) INTO BIG HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C) WITH SLOT FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS (1) CLOCKWISE TO SECURE CAM-BOLTS (3). PUSH COVERS (2) INTO CAM-LOCKS (1). INSERT WOOD DOWELS (8) INTO PREDRILLED HOLES ON BASE (D) AND FIT INTO CORRESPONDING HOLES ON BOTTOM EDGES OF SIDE PANELS (B, C). INSERT BARREL NUTS (5) INTO PREDRILLED HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C). INSERT MACHINE SCREWS (4) THROUGH PREDRILLED HOLES ON UNDERSIDE OF BASE (D) AND TIGHTEN INTO BARREL NUTS (5). PLEASE NOTE THAT IF SCREWS DO NOT TIGHTEN, ROTATE BARREL NUTS (5) SO THAT THREADS OF BARREL NUTS (5) FACING MACHINE SCREWS (4). INSERT CAM-BOLTS (3), WOOD DOWELS (8) INTO PREDRILLED HOLES ON UNDERSIDE OF TOP PANEL (A) AND FIT INTO CORRESPONDING HOLES ON TOP EDGES OF LEFT AND RIGHT SIDE PANELS (B, C). INSERT CAM-LOCKS (1) INTO BIG HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C) WITH SLOT FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS (1) CLOCKWISE TO SECURE CAM-BOLTS (3). PUSH COVERS (2) INTO CAM-LOCKS (1). AS SHOWN IN FIGURE 1.
FIGURE 1
Step 2: ATTACH LEFT AND RIGHT BACK PANELS (H, G) INTO SLOTS OF PARTS (A, B, C, D). INSERT PAN HEAD WOOD SCREWS (7) THROUGH PREDRILLED HOLES ON LEFT AND RIGHT BACK PANELS (G, H) AND TIGHTEN INTO REAR EDGES OF PARTS (A, B, C, D, E). AS SHOWN IN FIGURE 2.
FIGURE 2- BACK VIEW SHOWN FOR ASSEMBLY PURPOSES.
Step 3: IN ORDER TO STAND STURDILY. DRILL TWO
14" W
3/16”DIAMETER HOLES ON WALL, THE WALL ( 10)
DISTANCE BETWEEN TWO HOLES TO BE 14”
( 10)
AND SHOULD MATCH TO THE HANGING E G H ( 6) ( 9) B
F
HOLES ON BACK OF BACK PANELS (G, H).
( 9) ( 6)
FIT PLASTIC ANCHORS (10) INTO THE F
HOLES ON WALL. USE SCREWDRIVER TO C
E
FIT FLAT HEAD WOOD SCREWS (9) THROUGH THE HANGING HOLES ON BACK PANELS (G, H) INTO PLASTIC ANCHORS (10).
F
AS SHOWN IN FIGURE 3.
F E
"Please mount at least 1 screw into a wall stud. Wall anchor is not needed when screwing directly into a wall stud". FIT SHELF SUPPORTS (6) INTO PREDRILLED HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C). PUT ADJUSTABLE SHELVES
FIGURE 3
(F) ON EACH SHELF SUPPORTS (6) MATCHING THE POSITION OF GROOVES ON ADJUSTABLE SHELVES (F). AS SHOWN IN FIGURE 3.
Step 4: FIT LEFT AND RIGHT DOORS (I, J) INTO GROOVES ON TOP PANEL AND BASE (A, D). AS SHOWN IN FIGURE 4. AFTER LOCKING THE DOORS,IF THE GAP BETWEEN SIDE PANEL(S) AND DOOR IS UNEVEN,YOU CAN ADJUST THE SCREWS ON TWO CASTERS ON THE BOTTOM OF DOORS TO GET EVEN GAP.
(I )
FIGURE 4
Customer Service 1-800-633-5096
[email protected] Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas 75019
We'd love to hear from you! Email us photos of our products in your home at
[email protected] and we might feature it on our site or use it to model one of our inspirational photos.
“PARTS WILL BE SENT IF AVAILABLE FROM SEI” “THIS IS NOT A WARRANTY”
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/ Website/ Catalog
Please indicate color/size/style number:
Style No
Parts Letter
Parts Description
Quantity Needed
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to divide parts and label them to correspond with part list. Extra hardware may be included. If any items are missing, please contact Southern Enterprises at 800-633-5096 or in Dallas (972) 869-0111/ 9am – 4pm Mon-Fri Central time if you have product issues with your purchase. Please ask for a customer service representative for issues involving damages or replacement parts. Please ask for a technical assistance representative for any issues with product assembly and product construction. Please contact the retailer that you purchased from for returns. Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s).
