Transcript
AI - 811-00
TODDLER GUARD RAIL
BLY S EM ION ASS RUCT T INS
Assembly Instructions
Adult assembly required. Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quick assemble your product. Before you begin, we recommend that you follow the steps below: 1. Please read the instructions thoroughly 2. Identify all parts and hardware 3. You may need to provide the following tools: Philips Head screw driver Flat head screw driver Hammer Do Not Use Power Drills Or Drivers To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth. Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
PART LIST
1. 2.
Crib Guard rail
1 1
Dream On Me Inc., 1532 S Washington Ave., Piscataway Township, NJ 08854, Tel: 732-752-7220, Customer Care: +1 (732) 366-1788
STEP 1: FIND MODEL # ON BACK BOARD
# 801
# 804
BLY S EM ION ASS RUCT T INS
# 807
# 811
Dream On Me Inc., 1532 S Washington Ave., Piscataway Township, NJ 08854, Tel: 732-752-7220, Customer Care: +1 (732) 366-1788
AI-811-00
4
STEP 2: REMOVE FOOT BOARD - MODEL #807 AND #808
BLY S EM ION ASS RUCT T INS
STEP 3: INSLATE THE GUARD RAIL. HARDWARE INCLUDED IN CRIB MODEL # 807 AND 808 B x2
A
B
C
x
4 (1-3/8”)
C x2
x 2 (5/8”)
x 2
AI-811-00
BLY S EM ION ASS RUCT T S IN
A x4
5
STEP 2: REMOVE FOOT BOARD - MODEL #804
STEP 3: INSLATE THE GUARD RAIL. HARDWARE INCLUDED IN CRIB MODEL # 804
A
B
C
x
B x2
4 (1-5/8”)
C x2
x 2 (1”)
x 2
AI-811-00
A x4 6
STEP 2: REMOVE FOOT BOARD - MODEL #801
STEP 3: INSLATE THE GUARD RAIL. HARDWARE INCLUDED IN CRIB MODEL # 801
B x2
A
x
4 (1-3/8”)
C x2
B
C
x 2 (5/8”)
x 2
AI-811-00
A x4
7
Toddler Bed Conversion Model shown is example only. Styles may vary.
WARNING
WHEN CONVERTING THIS CRIB TO A TODDLER BED, A GUARD RAIL MANUFACTURED BY MIA MODA INC., MUST BE USED. In order to convert your crib to a toddler bed, you must first remove the front rail of the crib, then attach the guard rail using the bolts from the front rail removal.
NOTE: Make sure the mattress support is in the lowest position. Please follow the complete instructions that come with the guard rail which is sold separately.
AI-811-00
8
WARNING! For Toddler Bed Use • FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION. • DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD. • THE MATTRESS INTENDED FOR USE ON THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS HAVING THE DIMENSIONS OF 51-5/8 IN (1310 MM) IN LENGTH AND 27-1/4 IN (690 MM) IN WIDTH AND THICKNESS OF 4 IN (100 MM) OR A GREATER THICKNESS AS SPECIFIED BY THE MANUFACTURER. • THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS THAN 15 MONTHS AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50 LBS. (22.7 KG).
BULLETIN NO. AI-811-00
9
