Preview only show first 10 pages with watermark. For full document please download

Assembly Instructions For 3” Dome

   EMBED

Share

Transcript

Installation Manual for 3” Dome PIC. 1 1. UNPACK CAMERA AND ENCLOSED TOOLS. 2. PREPARE MOUNTING SURFACE AS SHOWN ON PICTURE 1. YOU WILL NEED FOUR #10 OR 5MM SCREWS (NOT SUPPLIED) 3. USING ENCLOSED TOOL, REMOVE 4 SECURITY SCREWS, LIFT THE COVER AND PUT IT ASIDE. 3a. IF YOU HAVE TO RUN CABLE THRU THE SIDE OPENING: REMOVE 3 SCREWS, WHICH HOLD CAMERA PLATE. REMOVE CAMERA WITH PLATE AND DISCONNECT CABLE FROM CAMERA ETHERNET CONNECTOR. REMOVE COVER FROM THE SIDE OPENING IN HOUSING AND RUN CABLE THRU IT USING 3 SCREWS INSTALL CAMERA BACK INTO HOUSING. 4. CONNECT CAMERA ETHERNET CABLE TO SYSTEM WIRING. CONNECT POWER TO 2-POS. CONNECTOR IF NECESSARY 5. INSTALL CAMERA ONTO DESIRED SURFACE USING #10 OR 5MM SCREWS. 6. FOCUS CAMERA. 7. INSTALL CAMERA COVER USING 4 SECURITY SCREW FROM STEP 3 www.arecontvision.com [email protected] 818.937.0700 877.CAMERA.8 Arecont Vision reserves the right to change products or specifications without notice ©2008 Arecont Vision