Preview only show first 10 pages with watermark. For full document please download

Assembly Instructions: Wall Mount Swing-out Rack Rfm-1944

   EMBED

Share

Transcript

To Order, Call Internet Email : 1-905-884-5250 : www.rfmote.com : [email protected] WALL MOUNT SWING-OUT RACK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS: WALL MOUNT SWING-OUT RACK RFM-1944-RSO-ADJ STEP 1: DETERMINE RACK POSITION / LOCATION STEP 1 : LOCATE POSITION FOR RACK STEP 2: ASSEMBLE TOP AND BOTTOM WALL MOUNT BRACKETS USING SUPPLIED STEP 2 : ASSEMBLE TOP AND 1/4-20 x 3/4” CARRIAGE BOLTSBRACKETS AND BOTTOM WALL MOUNT NUTS (SEE DIAG.) AS SHOWN, USING SUPPLIED 1/4-20 X 3/43:CARRIAGE BOLTS AND NUTS STEP DETERMINE WHICH WAY THE RACK WILL STEP 3: DETERMINE WHICH SWING OPEN (DIAG. SHOWS RIGHT HANDWAY SIDE PIVOT POINT) WOULD YOU LIKE THE RACK TO SWING STEP 4: STEP 4: ATTACH WALL MOUNT ATTACH WALL MOUNT BRACKETS TO BRACKETS RACK USING RACK USING 1/2”TO SHOULDER BOLTS 1/2” SHOULDER BOLTS ( NUT WELDED (NUT IS WELDED TO BRACKETS) IS AND TO BRACKETS) BE SURE TO PLACE FLAT WASHERS (SEE DIAG.) (NOTE: BE SURE TO PLACE THE WASHERS BETWEEN THE WASHERS BETWEEN THE RACK THE RACK FRAME AND THE BRACKET AS THIS FRAME AND THE BRACKETS AS THIS BECOMES THE PIVOT POINT) BECOMES THE PIVOT POINT. STEP 5: LOCK RACK PLACERACK USINGIN COIN LOCK STEP 5 IN : LOCK PLACE USING COIN LOCK STEP 6: STAND THE ASSEMBLY VERTICALLY AND STEP 6: STAND THE ASSEMBLY POSITION IT WITH BRACKETS FACING POSITION IT AGAINST THE THEAND WALL. UP WALL. FASTEN THE UNIT TO THE STEP 7: WALL. SECURELY FASTEN ASSEMBLED RACK UNIT TO THE STEP 7 : WALL DEPENDING ON THE WALL THE UNIT MAY REQUIRE FINE STEP 8: TUNING. BRACKET IT MAY BE NECESSARY TO HORIZONTAL ADJUSTMENTS MOVE EITHER THE TOP OR BOTTOM (TOP OR BOTTOM) ALLOW THE UNIT TO CLOSER AWAY MOVE CLOSEROR TO,FURTHER OR FURTHER AWAY,FROM FROM THE WALL. TO LOOSEN THE 1/4” THE WALL. DO THIS, LOOSEN CARRIAGE BOLTS AND SLIDE THE AND THE 1/4” CARRIAGE BOLTS BRACKETS IN ORBRACKETS OUT AS REQUIRED. SLIDE THE OUT OR IN AS SECURE BRACKET BOLTS ONCE REQUIRED. DESIRED POSITION IS DETERMINED.