Transcript
Merit® series direct-vent gas Fireplaces
An elegant addition to any home, this contemporary fireplace combines the art of fire with simplicity in design for a beautiful affordable hearth.
MLDVTCD shown with Obsidian Black crushed glass media.
■ The Merit® MLDVTCD contemporary gas fireplace focuses on the pure, simple, beauty that a decorative fireplace can add to
a room. With many of the same features as high end designer fireplaces, it brings the latest in comtemporary design to smaller
spaces. One of the most versatile fireplaces, it can be installed at floor level, with a raised hearth or even mid-wall providing
the perfect view. Add an elegant fascade, stunning in black or stainless steel, for a beautiful linear appearance. With a soothing
ribbon of flame, reflective porcelain rear panel, and a choice of optional interiors this fireplace is an unbeatable value. ■
2
STANDARD Features
OPTIONAL ACCESSORIES
Hidden ribbon burner creates a beautiful soothing flame.
Decorative façades in layered stainless, black and brass:
eflective black porcelain panel enhances R the appearance of the flames.
u Façade base in black and stainless v Façade frame in black and stainless w Façade trim in black, stainless
and brass
Perfectly sized for smaller spaces. Contemporary design delivers a clean modern look that complements many architectural styles.
u v
Choose from Millivolt or energy saving battery backed up intermittent pilot ignition. All models have hi/lo flame and heat control and will work during a power outage.
w
Decorative façade Decorative Facade combines three elements the facade base, facade frame, and trim. Choose from black or stainless steel for each element.
Deep Sea Blue crushed glass
Obsidian Black crushed glass
Diamond White crushed glass
Beach sand with reflective black porcelain panel
Tumbled river stone and beach sand with Zen Garden liner
Diamond White crushed glass with reflective black porcelain panel
Gas fireplace efficiencies MODEL
MLDVTCD-35N MLDVTCD-35P**
BTU/hr
CANADIAN ENERGUIDE RATING*
11,500–14,500 10,500–13,500
48% 51%
*Intermittent ignition systems. **Propane conversion kit available.
3
Dimensions
MLDVTCD-35
MLDVTCD Façade
Gas Fireplace Specifications 35”
F
Façade View
44-3/4” 35-1/2”
Top View
G
vent size Co-axial DV
4-1/2" Inner
Vent Size
7-1/2" Outer
Viewable Glass size
Floor
29-1/4"w x 20-1/4"h
33”
29”
32”
16”
Fireplace
24”
1/2" (13 mm)
9-1/4" (235 mm)
18” Min. Required > 28” Recommended
Front View
E
framing dimensions Width MLDVTCD-35
Height
35-1/4" (895 mm)
35-1/4" (895 mm)
dimensions MLDVTCD-35 A
32-1/4" (819 mm)
B
28-1/8" (714 mm)
C
23-1/4" (590 mm)
d
32"
E
35-1/4" (895 mm)
F
25"
A
Depth 16" (406 mm)
16" (406 mm)
Electrical Inlet (Right side only) Gas Inlet
G
12-1/2" (317 mm)
H
33"
(838 mm)
Optional Electrical Inlet (Both sides)
5.125 (130.2) 0.5 (12.7)
0.525 (13.3)
B
H
BLOWER ACCESS PANEL
(813 mm)
(635 mm)
C D
3" (76 mm)
Side View
5-7/8" (149 mm) 9-1/2" (241 mm) 1-5/8" (41 mm) 3" (76 mm)
Left Side View
Products and dealers You Can Count On
At Lennox, we understand how important it is for you to feel comfortable at home, so we're committed to providing you with the finest hearth products available. Choosing the right dealer for your hearth needs is every bit as important as choosing the right brand, and we think you'll agree that our dealers are a big reason why you can count on getting quality customer service when you call.
On the cover: MLDVTCD-35 shown with decorative façade in black and brushed stainless trim.
IMPORTANT NOTES: This appliance is extremely hot during operation. Read and understand all operating instructions before using this appliance. For further information, consult your dealer. Local conditions, such as elevation, wind, vent configuration and choice of fuel will affect overall appearance of the fire and performance. Performance can also vary with home design and insulation, climate, condition and type of fuel used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated. Diagrams, illustrations and photographs are not to scale—consult installation instructions. Product designs, materials, dimensions, specifications, colors and prices are subject to change or discontinuance without notice. Approved and listed to U.S. and Canadian safety and performance standards—ANSI Z21.50/CSA 2.22 and CAN/CGA 2.17M91.
© Innovative Hearth Products LLC 2013
www.lennoxhearthproducts.com 785269M-A 03/13 4
ETL Report No. 116-F-50-5
