Transcript
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
ATP Velocity MII 2.5” SATA SSD Specification
Revision 1.2
Your Ultimate Memory Solution!
1
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
Disclaimer ATP Electronics Inc. shall not be liable for any errors or omissions that may appear in this document, and disclaims responsibility for any consequences resulting from the use of the information set forth herein. The information in this manual is subject to change without notice. ATP general policy does not recommend the use of its products in life support applications where in a failure or malfunction of the product may directly threaten life or injury. All parts of the ATP documentation are protected by copyright law and all rights are reserved. This documentation may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without prior consent, in writing, from ATP Corporation. The information set forth in this document is considered to be “Proprietary” and “Confidential” property owned by ATP.
Revision History Date
Version
rd
1.0 1.1 1.2
Jul. 3 , 2009 Aug. 17th, 2009 Sep. 1st, 2009
Changes compared to previous issue - Initial Release - Update read/write performance - Update environment specification
Your Ultimate Memory Solution!
2
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
Table of Contents Introduction: ............................................................................................................. 5 Main Features: .......................................................................................................... 5 Block Diagram: ......................................................................................................... 6 Product Image:.......................................................................................................... 7 SATA SSD Pin Assignment: .................................................................................... 8 System Power Requirement:.................................................................................... 9 Environment Specifications:.................................................................................... 9 Reliability: ................................................................................................................. 9 Write/Erase Endurance.......................................................................................... 10 Performance: ........................................................................................................... 10 Physical Dimension Specifications: ....................................................................... 10 Mechanical Form Factor: ...................................................................................... 11
Your Ultimate Memory Solution!
3
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
This Page Intentionally Left Blank
Your Ultimate Memory Solution!
4
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
Introduction: The ATP Velocity MII 2.5” Serial ATA Solid State Drive is a high performance and high capacity mass storage solution in 2.5 inch form factor. Utilizing high speed DRAM cache for data buffering, ATP Velocity MII 2.5” SATA SSD provides an outstanding performance. ATP Velocity MII SATA SSD is designed for enterprise storage systems with outstanding sequential read and sequential write performance to relieve performance bottlenecks associated with traditional rotating media HDD storage. ATP Velocity MII SATA SSD brings new life into existing enterprise storage infrastructures and increases server and workstation utilization.
Main Features: z
Compact design: 2.5 inch form factor
z
Capacities: 16GB,32GB,64GB and 256GB
z
Maximum performance: Sequential read up to 240MB/s, sequential write up to 180MB/s
z
operating temperature: 0oC to 70oC
z
Read and write IOPS: up to 16,000 IOPS at 4KB random read, 4,500 IOPS at 4KB random write
z
Compliant with Serial ATA Revision 2.6.
z
Compatible with SATA 1.5Gbps and SATA 3.0Gbps interface rates
z
MLC (Multi Level Cell) NAND flash memory
z
Enhanced endurance by dynamic and static wear-leveling, 32GB SSD supports 15 terabyte random write
z
Hardware ECC & EDC
z
Supports S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) ATA feature set
z
Support Native Command Queuing (NCQ) command
z
Sudden power off recovery
z
RoHS compliant
z
CE, FCC & VCCI certification
Your Ultimate Memory Solution!
5
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
Block Diagram: ATP Velocity MII 2.5” SATA SSD consists of below functional blocks. The advanced architecture is optimized to provide highest data reliability and transfer performance.
ATP Velocity MII 2.5” SATA SSD SATA II controller
High bandwidth AHB Bus
SATA Host Device
ECC Engine MLC NAND Flash Memory
SDRAM Flash Controller High Performance ARM Core
Voltage Regulator (5V to 3.3V/ 1.8V)
SRAM
ROM
Your Ultimate Memory Solution!
6
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
Product Image:
Capacities:
ATP P/N AF16GSMCD AF32GSMCD AF64GSMCD AF256GSMCD
CAPACITY 16GB 32GB 64GB 256GB
Notes: 1. 1 GB = 1,000,000,000 Byte
Your Ultimate Memory Solution!
7
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
SATA SSD Pin Assignment:
Group
Signal Segment
1
Pin No.
Function
Description
S1
GND
Ground
S2
A+
S3
A-
S4
GND
S5
B-
S6
B+
S7
GND
P1
NC/V33
3.3V power (Not used)
P2
NC/V33
3.3V power (Not used)
P3
NC/V33
3.3V power (Not used)
P4
GND
Ground
P5
GND
Ground
P6
GND
Ground
P7
V5
5V power, pre-charge
P8
V5
5V power 5V power
Differential signal pair A Ground Differential signal pair B Ground Key & Spacing
Power Segment
P9
V5
P10
GND
Ground
P11
DAS
Device Activity Signal
P12
GND
Ground
P13
NC/V12
12V power (Not used)
P14
NC/V12
12V power (Not used)
P15
NC/V12
12V power (Not used)
Notes: 1. All pins are in a single row, with a 1.27 mm (0.050”) pitch.
Your Ultimate Memory Solution!
8
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
System Power Requirement: Parameter Supply voltage Read/Write power Idle power
Symbol VCC PW PS
Min 4.5 -
Typ 5.0 4.0 0.38
Max 5.5 -
Unit V W W
Remark RMS value RMS value
Environment Specifications: Type Operating Non-Operating Operating Non-Operating
Value 0 to 70oC -45oC to 85oC 25oC，8% to 95%, noncondensing 40oC，8% to 93%, noncondensing
Vibration
Operating
sine 16.4G, 10~2000Hz
Shock
Operating
Half sine 1500G/0.5ms
Operating Non-Operating
80,000 feet Max. 80,000 feet Max.
Temperature Humidity
Altitude
Reliability: Type Data Retention MTBF (@ 25oC) 1
Value 10 years 16GB: 1,960,000 hours 32GB: 1,870,000 hours 64GB: 1,700,000 hours 256GB: 980,000 hours
Notes: 1. The Mean Time Between Failures (MTBF) is calculated using a prediction methodology, Telcordia SR-332, which based on reliability data of the individual components in the SSD. It assumes nominal voltage, with all other parameters within specified range.
Your Ultimate Memory Solution!
9
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
Write/Erase Endurance Type Endurance Technology
SSD Endurance
Value Enhanced global dynamic and static wear-leveling algorithm SLC flash block: 100,000 program/erase cycles 16GB: supports 7.7 terabyte random write 32GB: supports 15 terabyte random write 64GB: supports 31 terabyte random write 256GB: supports 124 terabyte random write
Performance: Type
Value
Host Interface Speed
SATA 1.5Gb/s and SATA 3.0Gb/s Sequential Read: up to 240MB/s Sequential Write: up to 180MB/s 4KB Random Read: up to 16,000 4KB Random Write: up to 4,500
Data Transfer Rate1 Random Read/Write IOPS2 Notes:
1. The performance may vary according to different product capacity. 2. IOPS: Input/Output Operations per Second
Physical Dimension Specifications: Type Form factor Length Width Thickness
Value 2.5” 100.1 mm +/- 0.15mm 69.85 mm +/- 0.15mm 9.3 mm +/- 0.2mm
Your Ultimate Memory Solution!
10
ATP Confidential & Proprietary
Revision 1.2
ATP Velocity MII 2.5” SATA SSD Specification
Mechanical Form Factor (Units in mm):
Your Ultimate Memory Solution!
11
ATP Confidential & Proprietary
