Transcript
Featured Audio-Technica Product
02.20.15
ATR7000 Series VHF Wireless Microphone System Easy-to-use single channel wireless system is ready to go right out of the box, simply plug in receiver and turn on the transmitter Operates in VHF frequencies set aside for wireless mics (T2: 169.505 MHz, T3: 170.245 MHz, T8: 171.905 MHz) free from in-band TV channel interference Factory preset frequency eliminates potential user setup errors making it ideal for first time wireless or non-technical users Up to three systems (in different frequencies)can be used in same location under ideal conditions Ideal for schools, presenters, karaoke, small churches and other applications Extended operating range of up to 300’ Available in 4 system configurations (handheld, lavalier, guitar, headworn) MSRP: ATR7200 Handheld Microphone - $109.95; ATR7100G Bodypack w/guitar cable - $109.95; ATR7100L Bodypack w/ lavalier mic - $119.95; ATR7100H Bodypack w/ headworn mic - $129.95
What sets the ATR7000 Series Apart From the Competition Cut the cord and go wireless with a compact, portable, versatile VHF wireless system designed to provide reliable performance, easy setup and clear natural sound quality.
Rugged unidirectional dynamic element on handheld microphone/transmitter
Receivers quarter-wave telescoping antenna folds for storage
Rear-panel 1/4” audio output works with wide range of mixers, amplifiers and other sound equipment
Easily accessible On/Standby/ Off switch on transmitters
Compact receiver can stand on end using included stand or lay flat on a table
Red battery condition indicator on each transmitter
Front panel indicators provide visual status of RF signal and AF peaks
10 mW transmitter output for extended range up to 300’ Front-panel ON/Off/volume rotary control on receiver adjusts audio level at 1/4” output Easily accessible volume control on bodypack allows input level adjustment
Transmitters operate up to 14 hours on standard readily available 9V (NEDA 1604A) alkaline battery
Demonstrating the ATR7000 Wireless System Key feature
What to do...
What to say...
Easy to use
Un-box the system and set the components in front of the customer
The ATR7000 works right out of the box. Simply plug in the receiver, connect it to your sound system, put batteries in the transmitter and turn it on. No need to set frequencies or channels.
Easily accessible ON/Standby/Off switches
Point out the switch on the transmitter
The three position switch on the transmitter enables you to mute the audio without turning off the RF transmission. This help minimize potential interference from other RF devices.
Factory preset channel specific to wireless microphones
Show customer the “frequency” label on the receiver
Every ATR7000 wireless has a factory preset operating frequency which is dedicated by the FCC for wireless microphones. These frequencies are free from in-band TV interference.
Transmitters operate on standard 9V batteries
Open the transmitter and point out the battery compartment
Our transmitters will operate for 14 hours on standard readily available 9V batteries. These batteries can be found almost anywhere, anytime.
Up to three systems can be used at once
Show customer the package and point out the T2, T3 or T8
Each ATR7000 is configured to operate on a preset frequency indicated by T2, T3, or T8. Provided no one else nearby is operating a similar wireless, up to 3 systems can be used at once.
4 system configurations
Explain the configurations available
We offer the ATR7000 in a handheld transmitter configuration along with bodypack systems equipped with a lavalier mic, headset mic or guitar cable.
