Atx2200 Teleremote And Guidance Ready

Transcript

CONTROL & AUTOMATION SYSTEMS SECTION CM1 Copyright© Remote Control Technologies Pty Ltd www.rct.net.au [email protected] Control & Automation Protection Systems A smarter, universal remote control solution ATX2200 Teleremote and Guidance Ready The ATX2200-TG satisfies some key remote requirements without sacrificing the RCT strong, rugged design. Information Systems A significant reduction in maintenance and servicing costs is just one of the key remote requirements which the new ATX2200 addresses. A simple board design ensures remote reliability for remotely enabled machines across all Control Master solutions. The ATX2200 is capable of operating with all existing CM2200 and CM2000 machine operating systems making it the most universal remote on the market. The light weight control unit which includes a colour graphical display with internationally recognised symbols provides simple, accessible information for the effective control of remotely enabled equipment. For more information please email: [email protected] Specialised Electrical Equipment CM 4 Index Contents Automation and Remote Control Overview CONTROL & AUTOMATION SYSTEMS CM1 Remote Control Systems Overview 7 Automation Control Solutions ATX / CM2200 Remote Control Kits ATX / CM2200 Remote Control Transmitters and Receivers Guidance Solution Modular Teleremote Assembly (MTA) Portable Recovery Teleremote Solution Remote Control Trailer Cabin Teleremote Cabins Teleremote Fibre Optic Surface Control Station Teleremote Platforms to suit Personnel Carrier 8 9 11 12 13 13 14 14 14 Aerials and Mounts Batteries and Chargers Carry Frame and Shoulder Harnesses Guidance Parts Machine Parts Service and Test Kits Teleremote / Remote Parts and Equipment Teleremote Communications Fittings and Equipment Teleremote Docking Station Tools and Accessories Transit Case 15 16 17 18 20 23 24 26 29 29 30 Cameras and Brackets Electrical Interfaces Remote Start Lockouts 31 33 34 Remote Water Fill Systems 35 Brake Retrieval System Handheld Series 1000 Portable Remote Water Fill System Proportional Handheld System 35 36 37 38 Barrier Systems Laser Guard Machine Containment System 39 41 Automation Control Spare Parts and Accessories Automation Remote Control Machine Components Auxiliary Remote Control Systems Handheld Remote Control Systems: Series 1000 Work Area Safety Guards 5 CM PROT Control & Automation Protection Systems 6 CM Remote Control Systems Overview Control & Automation Automation and Remote Control Overview Remote Control Technologies Pty Ltd (RCT) has been servicing the mining industry since 1972. RCT is the industry market leader in Australasia for remote mining products, pioneering many Remote Control/Teleremote solutions for dozers, excavators, loaders and most types of mobile equipment. More than just a manufacturer, RCT provides the customer with a complete solution from start to finish. Our qualified staff have decades of industry experience to help our customers through each stage of the remote control solutions process. From site audits, equipment inspections, machine commissioning, skills training, parts supply, technical support and ongoing after sales support we ensure our customers maximise their investment in their equipment. Over 90% of the mining industry in Australia (AMM, 2009) chooses RCT as their preferred remote solutions manufacturer for the following important reason; RCT manufacture, install, commission, service and support all our products in operation, whether they be a decade old or recently fitted to the latest OEM machines. Protection Systems RCT has a worldwide service agent and distributor network to support all its products locally and internationally. All RCT Remote Control/Teleremote packages are manufactured to comply with strict Australian standards AS/NZS 4240 and we continue to invest in the development of future technology such as Guidance to keep the mining industry at the forefront of safety and productivity. Specialised Electrical Equipment Information Systems If you require any further information on machine suitability and appropriate remote control solutions please contact your nearest Remote Control Technologies branch. 7 CM Control & Automation Automation Control Solutions ATX / CM2200 Remote Control Kits RCT’s Line-of-Sight remote controls are suitable for surface or underground mobile machine application. The system is built for operator comfort and safety, allowing for longer periods of operation. Protection Systems Information Systems Part No: 10135 Part No: 10150 Part No: 11762 Description: KIT CM2000 RX/TX EUROPEAN SPEC Description: KIT CM2200 RX/TX GUIDANCE Description: KIT ATX2200 REGION 1 LINE-OF-SIGHT Part No: 11761 Part No: 11571 Part No: 11552 Description: KIT ATX2200 REGION 2 LINE-OF-SIGHT Description: KIT ATX2200 REGION 3 LINE-OF-SIGHT Description: KIT ATX2200 REGION 3 LINE-OF-SIGHT EXTERNAL UPS Part No: 11563 Part No: 11562 Part No: 11564 Description: KIT ATX2200 UPGRADE LINE-OF-SIGHT Description: KIT ATX2200 REGION 3 TELE / GUIDANCE UNDERGROUND INTERNAL UPS Description: KIT ATX2200 UPGRADE TELE / GUIDANCE Specialised Electrical Equipment Part No: 11908 Description: KIT ATX2200 REGION 2 & 3 LINE-OF-SIGHT CAT DOZER WITH CM2000 RECEIVER CM 8 ATX / CM2200 Remote Control Transmitters and Receivers RCT manufactures a broad range of Control Master® Remote Control Systems suitable for surface and underground mining applications. Control & Automation Automation Control Solutions Protection Systems RCT has designed customised remotes for application on machines such as loaders, drills, dozers, excavators, rock breakers, cherry pickers, skid steers, water cannons and much more. Control Master® Remote Control systems comply with Australian Standard AS4240. Part No: 4187 Part No: 4191 Description: TRANSMITTER CM2000 WITH TELE PLUG Description: TRANSMITTER CM2000 D11R/D10R CAN Description: RECEIVER CM2000 D11R/D10R CAN Part No: 4747 Part No: 7847 Part No: 7297 Description: RECEIVER RS232 ROCK BREAKER Description: RECEIVER CM2000 AS4240 Description: RECEIVER CM2200 GUIDANCE Part No: 7294 Part No: 10075 Part No: 11784 Description: TRANSMITTER CM2200 GUIDANCE Description: TX CM2200 IMPL J/S ALT LAYOUT Description: ATX2200 TRANSMITTER LINE-OF-SIGHT REGION 1 UNDERGROUND LOADER 9 Specialised Electrical Equipment Information Systems Part No: 0203 CM Control & Automation Protection Systems Part No: 11787 Part No: 11785 Part No: 11788 Description: CM2200 RECEIVER REGION 1 UNDERGROUND LOADER Description: ATX2200 TRANSMITTER LINE-OF-SIGHT REGION 2 UNDERGROUND LOADER Description: CM2200 RECEIVER REGION 2 UNDERGROUND LOADER Part No: 11786 Part No: 11789 Part No: 11490 Description: ATX2200 TRANSMITTER LINE-OF-SIGHT REGION 3 UNDERGROUND LOADER Description: CM2200 RECEIVER REGION 3 UNDERGROUND LOADER Description: ATX2200 TRANSMITTER TELE GUIDANCE Information Systems Specialised Electrical Equipment CM 10 Guidance Solution Control & Automation Automation Control Solutions The Control Master® Guidance system has been designed to reduce impact damage to the machine while increasing the general tramming speed of the machine to improve OVERALL operational efficiency. The steering, braking and speed of the machine is automatically controlled through the joystick position, minimum width of the drive and the look ahead distance. The system can be switched on or off from the joystick control unit and the digital display will tell the operator whether they are in Guidance operation or not. Guidance will allow second or higher gears to be selected to improve the speed of tramming cycles depending on the tramming length, minimum width of the drive and the look ahead distance. Control Master® Guidance will assist in avoiding the walls and major obstacles whilst keeping the loader in the optimal tramming path. The system requires minimal upgrade for existing Control Master® Teleremote customers and with no additional communications setup costs, the system is a cost effective semi automated solution for underground mining customers. Information Systems If you require any further information please contact your nearest Remote Control Technologies branch. Protection Systems The operator directs the machine forward or backward. Timely input left or right directs the machine into a drive junction. Specialised Electrical Equipment UNDERGROUND LOADER GUIDANCE SOLUTION UNDERGROUND TRUCK GUIDANCE SOLUTION 11 CM Control & Automation Automation Control Solutions Modular Teleremote Assembly (MTA) The Control Master® Modular Teleremote Assembly (MTA) is an extension of the portable Teleremote system. A dual channel TV monitoring package and stand replaces the smaller LCD display allowing the operator to have clearer and more precise vision of the machine’s operations. The MTA is designed for use in semi permanent mining production tasks whereby the operator needs to be comfortably positioned to operate the machine for long periods. Protection Systems Information Systems Part No: 0161 Part No: 3208 Part No: 4017 Description: KIT EXTERNAL JOYSTICK ADAPTOR Description: RECEIVER TELE TRI CHANNEL MTA3 Description: KIT MODULAR TELEREMOTE ASSEMBLY Part No: 8252 Part No: 4015 Description: RECEIVER TELE DUAL CHANNEL MTA 2 Description: KIT PORTABLE TELE DUAL CHANNEL Specialised Electrical Equipment CM 12 Portable Recovery Teleremote Solution Control & Automation Automation Control Solutions The Control Master® Portable Recovery Teleremote system works by using cameras on board the machine to provide the operator with vision of the machine’s movements. Part No: 8399 Part No: 4015 Description: RX 8030 WITH INTEGRATED 7126 VIDEO DEMODULATOR Description: KIT PORTABLE TELE DUAL CHANNEL Remote Control Trailer Cabin The Control Master® Remote Control Trailer Cabin (RCTC) is a custom engineered solution designed to provide remote control operators with an ergonomic, safe and productive portable working station. The RCTC provides a semi panoramic view of the remote controlled machine, improved noise suppression and climate controlled work environment. Information Systems Automation Control Solutions Protection Systems The camera images are relayed to a colour LCD screen which is positioned on the carry frame. The operator controls the machine via the vision from the LCD unit. The camera views can be manually switched at the LCD monitor. Specialised Electrical Equipment The RCTC is manufactured to a high build quality standard and is easy to maintain and service. 13 CM Control & Automation Automation Control Solutions Teleremote Cabins Remote Control Technologies Pty Ltd (RCT) has a prefabricated Control Master® Teleremote Cabin available which is specifically designed for long term Teleremote mining applications. The Teleremote Cabin is lightweight in design and has a strong steel shell which can withstand the harshest of mining conditions, it is not recommended for installation at close range to the blast face). If you require any further information please contact your nearest Remote Control Technologies branch. Protection Systems Automation Control Solutions Teleremote Fibre Optic Surface Control Station The Control Master® Fibre Optic Control Station (FOCS) is designed to be fitted into an office environment. The system is supplied complete with two video monitors, Teleremote chair, transmitter unit, fibre optic multiplexor, barrier status LED, 240 V AC to 13.8 V DC power supply and associated wiring. The Control Master® Series 2200 Remote Transmitter in conjunction with the operators station provide full proportional control information to the machine remote receiver. The remote control system consists of four main parts: the FOCS Transmitter/Operators Station, fibre optic communications system, Transmitter and Receiver. Information Systems Automation Control Solutions Teleremote Platforms to suit Personnel Carrier The Control Master® Teleremote Personnel Carrier (TPC) is a mobile Teleremote Cabin, which allows it to be used for multiple applications for surface and underground mining. The TPC has all the features of a Teleremote Cabin and does not require the use of any other machine to transport it. Specialised Electrical Equipment Part No: 9242 Part No: 7848 Description: CONTROL PLATFORM TO SUIT GUIDANCE Description: CONTROL PLATFORM MODULAR TELEREMOTE CM 14 Aerials and Mounts Control & Automation Automation Control Spare Parts and Accessories Part No: 1826 Description: ANTENNA TUNED CM2000TX Description: ANTENNA TUNED CM2000RX Description: ANTENNA TUNED CM-TELE-RX1 Part No: 3258 Part No: 3381 Part No: 5613 Description: CABLE ANTENNA BASE & M45T Description: AERIAL UNITY MAG BASE DATA Description: WHIP ANTENNA TUNED TO SUIT VIDEO Part No: 8531 Part No: 8913 Description: AERIAL UNITY MAG BASE VIDEO Description: WHIP ANTENNA TUNED TO SUIT DATA Information Systems Part No: 1823 Specialised Electrical Equipment Part No: 1822 Protection Systems A selection of aerials and antenna mounts designed and built to suit our range of Control Master® products. 15 CM Control & Automation Automation Control Spare Parts and Accessories Batteries and Chargers Fully sealed batteries and a purpose built charger, developed to sustain Control Master® products with a constant voltage for extended periods of time. Protection Systems Information Systems Part No: 11009 Part No: 10710 Part No: 6085 Description: CHARGER LITHIUM ION TO SUIT ATX2200 Description: BATTERY LITHIUM ION TO SUIT ATX2200 Description: CHARGER BATTERY LITHIUM ION Part No: 6400 Part No: 7277 Part No: 8511 Description: BATTERY PACK 12V 6.9AH L/ION Description: CHARGER BATTERY LEAD ACID Description: BATTERY 12V 7AH LEAD ACID Specialised Electrical Equipment CM 16 Carry Frame and Shoulder Harnesses Control & Automation Automation Control Spare Parts and Accessories Description: CARRY FRAME TO SUIT ATX2200 TRANSMITTER Description: CARRY FRAME TO SUIT CM2000 AND CM2200 TRANSMITTER Information Systems Part No: 4494 Specialised Electrical Equipment Part No: 10674 Protection Systems For Control Master® Remote Control Systems it is recommended that only approved parts be used. 17 CM Control & Automation Automation Control Spare Parts and Accessories Guidance Parts For Control Master® Guidance Solutions it is recommended that only approved Guidance parts be used. Protection Systems Information Systems Specialised Electrical Equipment Part No: 8498 Part No: 10041 Part No: 8185 Description: COMPLETE KIT MOUNT TO SUIT TELEREMOTE GUIDANCE LASER Description: COVER PROTECTOR TO SUIT LASER Description: END ROD 1/4 UNF (ROSE JOINT) Part No: 7280 Part No: 6060 Part No: 9249 Description: GUIDANCE CONTROL UNIT Description: GUIDANCE SENSOR STEERING Description: LOOM TO SUIT ENGINE SPEED R2900G GUIDANCE SPEED SENSOR Part No: 8122 Part No: 7806 Part No: 9003 Description: LOOM TO SUIT GUIDANCE CONTROL UNIT Description: LOOM TO SUIT GUIDANCE LASER Description: LOOM TO SUIT VEHICLE SPEED MONITOR R2900G GUIDANCE SPEED SENSOR CM 18 Description: COUPLER TO SUIT STEERING SENSOR Description: MOUNT TO SUIT ARTIC SENSOR PART # 6060 Part No: 11014 Part No: 10093 Part No: 10084 Description: HEAVY DUTY COVER TO SUIT PART # 11040 Description: PRESSURE SENSOR TO SUIT CATERPILLAR MACHINES Description: PRESSURE SENSOR TO SUIT TORO MACHINES Part No: 8356 Part No: 11040 Part No: 11042 Description: LASER ALIGNMENT TOOL Description: LASER AND MOUNT TO SUIT GUIDANCE SYSTEM SERIES 2 Description: UPGRADE KIT FROM PART # 7082 TO PART # 11040 Part No: 9290 Part No: 9324 Description: LASER IP67 50 METER RANGE Description: ISOLATOR MOUNT Control & Automation Description: UPS TO SUIT CM2200RX/ GUIDANCE Protection Systems Part No: 6047 Information Systems Part No: 10649 Specialised Electrical Equipment Part No: 9841 19 CM Control & Automation Automation Control Spare Parts and Accessories Machine Parts For Control Master® Remote Control systems it is recommended that only approved machine parts be used. Protection Systems Information Systems Specialised Electrical Equipment Part No: 1772 Part No: 1700 Part No: 5656 Description: 10 AMP CIRCUIT BREAKER Description: BATTERY ISOLATOR DUAL POLE WITH INDEX PIN Description: BRACKET TO SUIT VL NYLON LAMPS Part No: 7869 Part No: 5648 Part No: 7026 Description: COVER TO SUIT RECEIVER Description: DASH SWITCH Description: DUAL TELEREMOTE TRANSMITTER WITH TEXT ON VIDEO Part No: 6762 Part No: 10051 Part No: 1504 Description: EMS LOOM Description: LED WORKLAMP N22 12-24V 24W Description: MOUNT TO SUIT CAMERA DISTRIBUTION UNIT CM 20 Description: MOUNT TO SUIT TELEREMOTE TRANSMITTER (CAT R2900G ONLY) Description: RECEIVER MOUNTING FOOT PLUNGER Part No: 4391 Part No: 5560 Part No: 8806 Description: RECEIVER MOUNTING FOOT SOCKET Description: RECEIVER TO INTERFACE LOOM CM2000D SETUP Description: RECEIVER TO INTERFACE LOOM CM2200D SETUP Part No: 1677 Part No: 6779 Part No: 3249 Description: REMOTE HOURMETER Description: REMOTE HOURMETER LABEL Description: DUAL CHANNEL TELEREMOTE TRANSMITTER (OLD VERSION) Part No: 4300 Part No: 4076 Part No: 2746 Description: RIGHT ANGLE MOUNT TO SUIT PART # 1700 Description: SHALLOW AMBER NYLON VL LAMP CLEARANCE/ DIRECTIONAL INDICATOR 12/24 VOLT Description: SHALLOW BLUE NYLON VL LAMP FLASHING/CONSTANT 12/24 VOLT 21 Control & Automation Description: MOUNT TO SUIT TELEREMOTE TRANSMITTER Protection Systems Part No: 4392 Information Systems Part No: 0993 Specialised Electrical Equipment Part No: 3333 CM Control & Automation Part No: 3083 Part No: 8273 Part No: 5218 Description: STARTER ISOLATOR LABEL Description: TELEREMOTE DASH LOOM (CAT ONLY) Description: TELEREMOTE GUIDANCE BREAKER LABEL Protection Systems Part No: 3794 Description: YELLOW HEAVY DUTY LOCKOUT BRACKET TO SUIT PART # 1700 Information Systems Specialised Electrical Equipment CM 22 Service and Test Kits Control & Automation Automation Control Spare Parts and Accessories RCT manufactures purpose built service & test kits for its remote control systems. The service and test kits allow on site personnel to quickly and effectively test remote equipment for faults, perform operating diagnostics and replace worn components with minimal downtime. Part No: 2143 Part No: 2181 Description: TEST KIT TO SUIT CM2000 Description: KIT TX FIELD SERVICE Description: KIT RX FIELD SERVICE Part No: 0053 Part No: 9908 Part No: 7273 Description: CM2000D TX / RX TEST UNIT Description: ATX2200 / CM2200 TX / RX TEST KIT Description: ATX2200 / CM2200 REMOTE CONTROL TEST UNIT Part No: 3934 Part No: 3145 Description: COMMUNICATIONS TEST UNIT Description: TELEREMOTE TEST KIT Specialised Electrical Equipment Information Systems Part No: 2060 Protection Systems RCT manufactures service kits for both standard and customised remote control systems. 23 CM Control & Automation Automation Control Spare Parts and Accessories Teleremote / Remote Parts and Equipment For Control Master® Remote Control systems it is recommended that only approved telecommunications parts be used. These telecommunications parts have been carefully selected to ensure the best transfer of data and video signals. Protection Systems Information Systems Specialised Electrical Equipment Part No: 8840 Part No: 1127 Part No: 3292 Description: BI-DIRECTIONAL AMPLIFIER Description: CABLE NON RADIATING 10MM RG8 COXIAL Description: CABLE SET 4M RG58 N TYPE MALE BNC PLUG Part No: 5945 Part No: 5371 Part No: 5370 Description: CABLE SET 70M INCLUDES N TYPE CONNECTORS Description: CABLE SET 3M INCLUDES N TYPE CONNECTORS Description: CABLE SET 2M INCLUDES N TYPE CONNECTORS Part No: 6037 Part No: 2564 Part No: 7203 Description: DC BLOCK N TYPE CONNECTOR Description: DUMMY LOAD 15 WATT Description: DUPLEXOR FILTER COMBINER CM 24 Description: MOUNT YAGI SERIAL Description: PHASING HARNESS Part No: 4305 Part No: 2444 Part No: 4617 Description: RF SWITCH 2 WAY Description: SPLIT SET MOUNT Description: STAND OFF WALL MOUNT Part No: 3913 Part No: 4150 Part No: 11071 Description: UNIVERSAL VIDEO LINE AMPLIFIER Description: YAGI ANTENNA AND BRACKET Description: YAGI ANTENNA AND BRACKET STAINLESS STEEL Control & Automation Description: LEAD SET TO SUIT 4150 ANTENNA Protection Systems Part No: 0450 Information Systems Part No: 3209 Specialised Electrical Equipment Part No: 4717 25 CM Control & Automation Automation Control Spare Parts and Accessories Teleremote Communications Fittings and Equipment For Control Master® Remote Control systems it is recommended that only approved fittings be used to connect the communications systems to ensure fault free operation. The fittings used have been carefully selected to ensure the best transfer of data and video signals. Part No: 0220 Part No: 0222 Description: ADAPTOR 90° N MALE/N FEMALE Description: ADAPTOR BNC JACK/ UHF MALE Description: ADAPTOR BNC PLUG/ UHF FEMALE Information Systems Part No: 4619 Part No: 9663 Part No: 0941 Description: ADAPTOR N FEMALE/N FEMALE Description: ADAPTOR N MALE/ BNC JACK Description: ADAPTOR N MALE/N MALE Specialised Electrical Equipment Protection Systems Part No: 4618 Part No: 9650 Part No: 0258 Part No: 0013 Description: ADAPTOR N MALE/ UHF FEMALE Description: BULKHEAD BNC JACK/BNC JACK Description: BULKHEAD BNC JACK/RG174 (CABLE 0261) CM 26 Description: BULKHEAD N FEMALE/N FEMALE Description: BULKHEAD N FEMALE/RG58 CRIMP (CABLE 7293) Part No: 1056 Part No: 0259 Part No: 1055 Description: CABLE PLUG BNC JACK/RG58 CRIMP (CABLE 7293) Description: CABLE PLUG BNC PLUG/90° RG316 CLAMP (CABLE 0684) Description: CABLE PLUG BNC PLUG/RG213 CLAMP Part No: 7425 Part No: 7434 Part No: 7426 Description: CABLE PLUG BNC PLUG/RG58 CLAMP (CABLE 7293) Description: CABLE PLUG BNC PLUG/RG58 CRIMP (CABLE 7293) Description: CABLE PLUG BNC PLUG/90° RG58 CLAMP (CABLE 7293) Part No: 7540 Part No: 4499 Part No: 5036 Description: CABLE PLUG TV MALE/RG59 CLAMP (CABLE 4498) Description: CABLE PLUG FEMALE/COAX CLAMP (CABLE 4498) Description: CABLE PLUG N FEMALE/1/2” HELIAX (CABLE 8905) Control & Automation Description: BULKHEAD BNC JACK/RG58 CRIMP (CABLE 7293) Protection Systems Part No: 8259 Information Systems Part No: 5730 Specialised Electrical Equipment Part No: 0264 27 CM Control & Automation Protection Systems Information Systems Part No: 9268 Part No: 9177 Part No: 0940 Description: CABLE PLUG N FEMALE/RG213 CLAMP Description: CABLE PLUG N FEMALE/RG58 CRIMP (CABLE 7293) Description: CABLE PLUG N MALE/1/2” HELIAX (CABLE 8905) Part No: 5035 Part No: 9194 Part No: 1061 Description: CABLE PLUG N MALE/1/2” HELIAX (CABLE 8905) Description: CABLE PLUG N MALE/ RG213 CLAMP Description: CABLE PLUG N MALE/ RG213 CRIMP Part No: 4616 Part No: 1128 Part No: 1067 Description: CABLE PLUG N MALE/ RG58 CRIMP (CABLE 7293) Description: CABLE PLUG N MALE/ RG8 CRIMP (CABLE 1127) Description: CABLE PLUG TNC PLUG/RG58 CRIMP (CABLE 7293) Specialised Electrical Equipment CM 28 Control & Automation Teleremote Docking Station Protection Systems For Control Master® Remote Control Systems it is recommended that only approved parts be used. Part No: 11448 Description: ATX2200 REGION 2 & 3 TELEREMOTE DOCKING STATION Automation Control Spare Parts and Accessories Tools and Accessories For Control Master® Remote Control systems it is recommended that only approved tools and accessories be used. Part No: 5411 Part No: 10278 Description: AMALGAMATING TAPE 25MM Description: COAX TERMINATION CRIMP TOOL KIT Description: COMMUNICATION PARTS FIELD SERVICE KIT Specialised Electrical Equipment Part No: 2353 Information Systems Automation Control Spare Parts and Accessories 29 CM Control & Automation Protection Systems Part No: 8892 Part No: 2800 Part No: 9659 Description: DEUTSCH CRIMP TOOL TO SUIT #16 CONTACTS Description: GREASE ELECTROGUARD 50G Description: O-RING GREASE 100G Part No: 8138 Part No: 11542 Part No: 11579 Description: TRIMMING TOOL TO SUIT 8905 ½” HELIAX CABLE Description: COAX STRIPPING TOOL TO SUIT 1127 CABLE Description: REPLACEMENT BLADE SET TO SUIT PART # 11542 Automation Control Spare Parts and Accessories Transit Case Information Systems For Control Master® Remote Control Systems it is recommended that only approved parts be used. Specialised Electrical Equipment Part No: 11802 Part No: 5844 Description: TRANSIT CASE TO SUIT ATX2200 KIT Description: TRANSIT CASE TO SUIT CM2000 / CM2200 CM 30 RCT’s remote control machine components include the heavy duty Teleremote camera. The camera has been designed to operate in the harshest conditions. This incorporates a 10mm LED and a 3 pin Deutsch connector. Various angle lenses can be retro fitted at any time. The enclosure is lightweight and designed to deliver high quality video images under extreme conditions both underground and on the surface. • 12 volt only • Current draw of 110mA • Sealed to IP67 • Reverse polarity and short circuit protected • Optimised lens angle for underground mining • Utilises CCD HAD II technology Part No: 11611 Part No: 11587 Description: HIGH RESOLUTION HEAVY DUTY CAMERA WITH MOUNT (REPLACEMENT FOR PART # 5555) Description: LENS KIT TO SUIT 11586 Description: REAR ASSEMBLY TO SUIT 11586 Part No: 11588 Part No: 11590 Part No: 11589 Description: FRONT ASSEMBLY TO SUIT 11586 Description: MOUNT ASSEMBLY TO SUIT 11586 Description: INTERNAL ASSEMBLY TO SUIT 11586 Part No: 5555 Part No: 8772 Part No: 0705 Description: CAMERA FULLY HOUSED SERIES 2 (PART # 11586 FOR REPLACEMENT SALES) Description: MOUNT BRACKET FOOTPRINT TO SUIT 5555 ONLY Description: CAMERA BRACKET TO SUIT TELE FIT R/VIEW 31 Specialised Electrical Equipment Information Systems Part No: 11586 Control & Automation Cameras and Brackets Protection Systems Automation Remote Control Machine Components CM Part No: 10635 Description: MOUNT TO SUIT 5555 NO POLE Description: MOUNT POLE TO SUIT 5555 FOOTPRINT Description: BASE MOUNT ONLY TO SUIT 5588 Part No: 7284 Part No: 10177 Part No: 7169 Description: LOOM CAMERA 6M TO SUIT 5555 & 2310 Description: LOOM TELE CAMERA 12 METRE Description: LOOM TELE CAMERA 6 METRE Part No: 4931 Part No: 8412 Part No: 10248 Description: LOOM TELE CAMERA 3 METRE Description: LOOM ADAPTOR Description: LOOM ADAPTOR (7169 TO 3249) Specialised Electrical Equipment Part No: 4480 Part No: 3863 Description: CAMERA DISTRIBUTION UNIT SINGLE CAMERA Description: CAMERA DISTRIBUTION UNIT DUAL CAMERA Protection Systems Part No: 5588 Information Systems Control & Automation Part No: 0979 CM 32 Electrical Interfaces Interfaces are manufactured to integrate Control Master® Remote and Teleremote Solutions into Original Equipment Manufacturer (OEM) machines. For further technical information please refer to your nearest RCT branch. • Robust alloy enclosure • Military style connectors • Internal circuit breakers • Purpose built for each machine model • Available in 12 or 24 volt Protection Systems Electrical interfaces are customised to suit each make of machine. Control & Automation Automation Remote Control Machine Components Part No: 8861 Part No: 3359 Description: INTERFACE TO SUIT R2900G PROPORTIONAL Description: INTERFACE CM2200 TO SUIT CAT PCB VERSION Description: INTERFACE TO SUIT R1300/R1600 PROPORTIONAL Part No: 6031 Part No: 7531 Part No: 8924 Description: INTERFACE CM2200 TO SUIT R1300 SERIES 2 Description: INTERFACE TO SUIT R1700G PROPORTIONAL Description: INTERFACE TO SUIT R1700 SERIES 2 PROPORTIONAL Part No: 10015 Part No: 5754 Part No: 1083 Description: INTERFACE CM2200 TO SUIT ATLAS ST1520 Description: INTERFACE CM2000 TO SUIT ST1520/1030/710 LOADERS Description: INTERFACE CM2000 TO SUIT TORO 1400 33 Specialised Electrical Equipment Information Systems Part No: 8025 CM Control & Automation Part No: 3495 Part No: 0345 Description: INTERFACE CM2200 TO SUIT TORO LOADER Description: INTERFACE CM2200 TO SUIT R1700G PROPORTIONAL SERIAL # SBR ONWARDS Automation Remote Control Machine Components Remote Start Lockouts Protection Systems The Control Master® Remote Start Lockout unit is designed to inhibit the selection of remote control until the machine park brake has been applied and neutral gear has been selected. This product is suitable for earlier Elphinstone model machines that were not manufactured with this feature from the factory. Information Systems Part No: 0141 Part No: 0472 Description: REMOTE START LOCKOUT CONTROL POSITIVE SWITCHING (PARK BRAKE) Description: REMOTE START LOCKOUT CONTROL NEGATIVE SWITCHING Specialised Electrical Equipment CM 34 Remote Water Fill Systems Control & Automation Auxiliary Remote Control Systems The Control Master® Remote Control Water Truck Fill System is designed to allow the operator to operate the site water fill systems from the cabin of the water truck via radio remote control. The system incorporates LED status indicators to inform the operator of the fill process status and also system integrity. Protection Systems By utilising inbuilt binary codes individual water trucks can be identified by each water fill receiver. This information can be used to log who is using each fill point, how many times and when they were filled. RCT can supply data logging equipment if required. Part No: 5864 Part No: 5949 Part No: 5325 Description: WATER FILL TRANSMITTER CONTROL PANEL 24 VOLT Description: WATER FILL TRANSMITTER UNIT 24 VOLT Description: WATER FILL RECEIVER 24 VOLT Brake Retrieval System Specialised Electrical Equipment RCT designs and manufactures a range of industrial, portable, handheld and fixed application remotes. The remotes are built in accordance with the Australian Standards and are available off the shelf in a kit or can be customised to suit applications. Information Systems Handheld Remote Control Systems: Series 1000 Part No: 10435 Description: HAND HELD TRANSMITTER 35 CM Control & Automation Handheld Remote Control Systems: Series 1000 Handheld Series 1000 RCT designs and manufactures a range of industrial, portable, handheld and fixed application remotes. The remotes are built in accordance with the Australian Standards and are available off the shelf in a kit or can be customised to suit applications. Protection Systems Information Systems Specialised Electrical Equipment Part No: 10436 Part No: 10143 Part No: 9319 Description: CM1000 TX HANDHELD TRANSMITTER 6 FUNCTION Description: CM1000 TX HANDHELD TRANSMITTER 12 FUNCTION Description: CM1000 TRANSCEIVER 12/24V Part No: 9429 Part No: 10142 Part No: 2340 Description: EXPANSION MODULE T/S CM1000 Description: CHARGER TO SUIT 10436 AND 10143 Description: CHARGER TO SUIT 0682 Part No: 9637 Part No: 7764 Description: ANTENNA BASE TO SUIT 9319 Description: ANTENNA TO SUIT 9319 CM 36 Portable Remote Water Fill System Control & Automation Handheld Remote Control Systems: Series 1000 Part No: 10964 Part No: 10142 Description: HANDHELD TRANSMITTER Description: RECEIVER Description: BATTERY CHARGER Part No: 7764 Part No: 9637 Description: ANTENNA Description: ANTENNA BASE Specialised Electrical Equipment Information Systems Part No: 10962 Protection Systems RCT designs and manufactures a range of industrial, portable, handheld and fixed application remotes. The remotes are built in accordance with the Australian Standards and are available off the shelf in a kit or can be customised to suit applications. 37 CM Control & Automation Handheld Remote Control Systems: Series 1000 Proportional Handheld System RCT designs and manufactures a range of industrial, portable, handheld and fixed application remotes. The remotes are built in accordance with the Australian Standards and are available off the shelf in a kit or can be customised to suit applications. The Proportional Handheld is a unique product that incorporates both proportional control paddles and digital pushbutton switches. Protection Systems Information Systems Part No: 11466 Part No: 9319 Part No: 10142 Description: HANDHELD TRANSMITTER WITH PROPORTIONAL SLIDERS Description: RECEIVER Description: BATTERY CHARGER Part No: 7764 Part No: 9637 Description: ANTENNA Description: ANTENNA BASE Specialised Electrical Equipment CM 38 Barrier Systems Control & Automation Work Area Safety Guards Control Master® Barrier Systems are designed to prevent personnel and machines from entering and exiting the Teleremote zone whilst it is in remote control operation. In the event a laser barrier guarding the Teleremote zone is broken, the barrier system will shutdown and apply the service and park brake to remote controlled machines in the Teleremote area. Part No: 3564 Part No: 4720 Description: BARRIER EYE RESET M/ VOLTAGE Description: KIT EXTRA LASER TO SUIT 4720 & 6346 Description: KIT INTEGRATED BARRIER 12V Part No: 6346 Part No: 7579 Part No: 8017 Description: KIT UMBILICAL INTEGRATED 240V Description: SINGLE BEAM LASER BARRIER SYSTEM Description: BRACKET TO SUIT 1251 RESET UNIT Part No: 9414 Part No: 5642 Part No: 8043 Description: POWER SUPPLY Description: TRANSMITTER UMBILICAL 12V 4 BEAM Description: RESET UNIT TO SUIT 7579 39 Specialised Electrical Equipment Part No: 1251 Information Systems Protection Systems More importantly, the barrier system will ensure the Teleremote operation zone remains safe. CM Control & Automation Protection Systems Part No: 9244 Part No: 9239 Part No: 4097 Description: LASER TO SUIT BARRIER SYSTEM WITH PLUG Description: REFLECTOR ROUND 75MM TO SUIT LASER 9244 Description: REFLECTOR POLARISED 100MM X 100MM Part No: 9265 Part No: 0137 Part No: 5657 Description: MOUNT LASER TO SUIT 9244 Description: LOOM 5M TO SUIT 1251 RESET UNIT Description: LOOM 25M TO SUIT 1251 RESET UNIT Information Systems Specialised Electrical Equipment CM 40 Laser Guard Machine Containment System Control & Automation Work Area Safety Guards The Control Master® Laser Guard Machine Containment System has been designed for underground Remote/ Teleremote mining applications where multiple entries to a remote mining area need to be guarded from the remote machine exiting the area, as well as personnel entering the area. The Master Unit can receive signals from up to four (4) Laser Control Unit Kits. Each Control Unit Kit consists of two (2) lasers spaced 800mm apart which gives double redundant operation. This prevents personnel being able to go under or step over the laser beams without triggering the Laser Guard. Part No: 10042 Part No: 10148 Description: KIT LASERGUARD 12V 1 CONTROL Description: KIT LASER GUARD CONTROL UNIT Description: KIT LASER GUARD SINGLE CM2000 MACHINE CONTAINMENT SYSTEM SINGLE ACCESS Part No: 10170 Part No: 9675 Part No: 9674 Description: KIT LASER GUARD SINGLE CM2200 MACHINE CONTAINMENT SYSTEM SINGLE ACCESS Description: LASER TO SUIT LASER GUARD W/PLUG WITH 4 PIN DEUTSCH PLUG Description: PLUG BYPASS TO SUIT LASER GUARD Specialised Electrical Equipment Part No: 9673 Information Systems If a laser beam is tripped, power is removed from the remote control transmitter causing the machine to neutralise, brakes to apply and the engine to shutdown. The laser unit that has been tripped will be indicated at the Laser Guard Master Unit by the corresponding LED changing state from solid green to flashing red. Operations can only be resumed when the tripped laser beam has been inspected, trip cause corrected and both the Control and Master Units have been reset. Protection Systems How the System Works 41 CM Control & Automation Protection Systems Information Systems Part No: 10146 Part No: 10138 Part No: 9564 Description: BYPASS PLUG TO SUIT 10144 CM2000 Description: PLUG BYPASS TO SUIT LASER GUARD 3 PIN DEUTSCH Description: DUAL LASER ASSEMBLY LASER GUARD Part No: 9562 Part No: 9514 Part No: 9525 Description: DUAL REFLECTOR ASSEMBLY LASER GUARD Description: UNIT LASER GUARD MASTER Description: CONTROL UNIT TO SUIT LASER GUARD Part No: 9638 Part No: 10144 Description: LOOM TO SUIT 9525 LASER GUARD CONTROL UNIT Description: LOOM TO SUIT 9525 DUAL LASER Specialised Electrical Equipment CM 42