Transcript
CHELLO AIR The clean lines of CHELLO AIR is coupled with a gullwing reflector system for optimum light direction and outstanding performance. Freedom to use a variety of prismatic panel options enables CHELLO AIR to be custom designed to create perfect light uniformity for office and general lighting areas. Suitable for supply or return air applications, CHELLO AIR is manufactured to suit both new or existing mechanical and suspended ceiling system requirements. Available in a single or twin version, CHELLO AIR is wired complete with electronic (A2) ballast, L5 ribbed lens, colour 840 triphosphor lamps and 1.5m 3 core 3 pin flex and plug.
Technical information Product Code Wattage
Polar Distribution Curve
IES INDOOR REPORT PHOTOMETRIC FILENAME : LL15327.IES POLAR GRAPH
Mounting
Lens
Nominal Dim. (mm)
374
L W D
CH-A-114
1x14w T5
Recessed Air
L5
590
290
100
CH-A-214
2x14w T5
Recessed Air
L5
590
290
100
CH-A-124
1x24w T5
Recessed Air
L5
590
290
100
CH-A-224
2x24w T5
Recessed Air
L5
590
290
100
CH-A-128
1x28w T5
Recessed Air
L5
1190
290
100
CH-A-228
2x28w T5
Recessed Air
L5
1190
290
100
CH-A-154
1x54w T5
Recessed Air
L5
1190
290
100
CH-A-254
2x54w T5
Recessed Air
L5
1190
290
100
281
187
94
Maximum Candela = 374.33 Located At Horizontal Angle = 0, Vertical Angle = 0 # 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
CH-A-128
Wiring Options
Code
DSI digital dimming ballast
-D1
DALI Eco digital dimming ballast
-D2
DALI Excel digital dimming ballast
-D3
1-10V Analogue dimming ballast
-D4
Emergency Single Point pack
-EM
Fused terminal block
-FTB
Colour 830 Triphosphor Lamp
-3K
Photometric Toolbox Professional Edition - Copyright 2002-2012 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations, values rounded for display purposes. Results derived from content of manufacturers photometric file.
Lens Options
Code
Size Options
Code
L19 Prismatic Lens
-L19
400mm Wide
-4
L7 Coarse Ribbed Opal Lens
-L7
450mm Wide
-45
600mm Wide
-6
The purpose of this data sheet is to provide general product information only. The product description, product specifications (including, without limitation, design, colour or materials) and other information in this data sheet are subject to change without notice. Whilst reasonable care has been taken to ensure the correctness of this data sheet, Australume Pty Ltd and each of its directors, officers, employees, agents and advisers disclaims all liability for loss or damage suffered or sustained as a result of any reliance on the information in this data sheet. It is the customer’s responsibility to ensure suitability of the selected product referred to in this data sheet. Australume Pty Ltd reserves the right to discontinue this product or withdraw it from sale at any time without any prior notice or liability.
Page 1
www.australume.com.au
