Transcript
SILIC SURFACE Premium in design, SILIC SURFACE offers a robust solution to cleanroom applications. Rated IP44, the SILIC features an array of inclusions such as 3mm clear acrylic lens combined with L12 prismatic lens in a secured frame with closed cell sealing gasket and countersunk screws. SILIC SURFACE is powder coated to a high gloss white finish and is wired complete with electronic (A2) ballast and colour 840 triphosphor lamps.
Technical information
Polar Distribution Curve
IES INDOOR REPORT PHOTOMETRIC FILENAME : SL-P-228.IES POLAR GRAPH
Product Code
Wattage
Lens
Mounting Nominal Dim. (mm)
1029
L W D
772
SL-S-114
1x14w T5 3mm Clear Acrylic and L12 Lens
Surface
590 290
100
SL-S-214
2x14w T5 3mm Clear Acrylic and L12 Lens
Surface
590 290
100
SL-S-314
3x14w T5 3mm Clear Acrylic and L12 Lens
Surface
590 590
100
SL-S-414
4x14w T5 3mm Clear Acrylic and L12 Lens
Surface
590 590
100
SL-S-124
1x24w T5 3mm Clear Acrylic and L12 Lens
Surface
590 290
100
SL-S-224
2x24w T5 3mm Clear Acrylic and L12 Lens
Surface
590 290
100
SL-S-324
3x24w T5 3mm Clear Acrylic and L12 Lens
Surface
590 590
100
SL-S-424
4x24w T5 3mm Clear Acrylic and L12 Lens
Surface
590 590
100
SL-S-128
1x28w T5 3mm Clear Acrylic and L12 Lens
Surface
1190 290
100
515
SL-S-228
2x28w T5 3mm Clear Acrylic and L12 Lens
Surface
1190 290
100
SL-S-135
1x35w T5 3mm Clear Acrylic and L12 Lens
Surface
1490 290
100
SL-S-235
2x35w T5 3mm Clear Acrylic and L12 Lens
Surface
1490 290
100
SL-S-154
1x54w T5 3mm Clear Acrylic and L12 Lens
Surface
1190 290
100
SL-S-254
2x54w T5 3mm Clear Acrylic and L12 Lens
Surface
1190 290
100
257
Maximum Candela = 1029.08 Located At Horizontal Angle = 67.5, Vertical Angle = 5 Vertical Plane Through Horizontal Angles (67.5 - 247.5) (Through Max. Cd.)
SL-S-228
Wiring Options
Code
DSI digital dimming ballast
-D1
DALI Eco digital dimming ballast
-D2
DALI Excel digital dimming ballast
-D3
1-10V Analogue dimming ballast
-D4
Photometric Toolbox Professional Edition - Copyright 2002-2012 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations, values rounded for display purposes. Results derived from content of manufacturers photometric file.
Emergency Single Point pack
-EM
Fused terminal block
-FTB
Colour 830 Triphospher Lamps
-3K
Lens Options
The purpose of this data sheet is to provide general product information only. The product description, product specifications (including, without limitation, design, colour or materials) and other information in this data sheet are subject to change without notice. Whilst reasonable care has been taken to ensure the correctness of this data sheet, Australume Pty Ltd and each of its directors, officers, employees, agents and advisers disclaims all liability for loss or damage suffered or sustained as a result of any reliance on the information in this data sheet. It is the customer’s responsibility to ensure suitability of the selected product referred to in this data sheet. Australume Pty Ltd reserves the right to discontinue this product or withdraw it from sale at any time without any prior notice or liability.
Page 1
Code
L19 Prismatic Lens
-L19
L5 Fine Ribbed Opal Lens
-L5
L7 Coarse Ribbed Opal Lens
-L7
www.australume.com.au
