Transcript
AUTO-RANGING AC CLAMP METER Non Contact Voltage Indicator MODEL: 9001 FEATURES
AC 700A
Maximum reading of 3999. ACA measurement up to 600A. Dimensions of conductor: Ø35mm. Ohm, Diode, Continuity, Capacitance, Frequency and Duty input protection to 600V DC/AC rms. Resistance measurement from 0.1Ω to 40MΩ. Diode test and Audible continuity check function. Frequency counter from 0.500Hz to 5MHz. Auto power off to preserve battery life. Display Back-Light feature. Provides: DATA-HOLD, RELATIVE(ZERO) . EN61010-1, 600V CAT IV, 1000V CAT III.
AC CURRENT H
NCV
>2S
9001
AC VOLTS
HOLD
AUTO
Range: 40A, 400A, 600A Resolution: 0.01A Accuracy: ±(1.5% rdg + 10dgts) on 50 to 60 Hz ±(3.5% rdg + 10dgts) on 45 to 500 Hz Range: 0.1V to 600V 400mV(manu), 4V, 40V, 400V, 600V Resolution: 1mV Accuracy: ±(1.0% rdg + 4dgts)on 4V to 600V(@45 to 500Hz) Input impedance: >10MΩ
DC
AC
NCV
ZERO
Hz-%
A
RANGE
Hz-%
mV
NCV
V V NCV CAT IV 600V CAT III 1000V
COM
V 600V MAX
DC VOLTS Range: 0.1V to 600V 400mV(manu), 4V, 40V, 400V, 600V Resolution: 100μV Accuracy: ±(0.5% rdg + 1dgt) Input impedance: >10MΩ
RESISTANCE Range: 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ Resolution: 0.1Ω Accuracy: ±(1.0% rdg + 3dgts) on 400Ω to 4MΩ range ±(3.0% rdg + 4dgts) on 40MΩ range
FREQUENCY Range: 5Hz, 50Hz, 500Hz, 5KHz, 50KHz, 500KHz, 5MHz Resolution: 0.001Hz Accuracy: ±(0.1% rdg + 3dgt) on 5Hz to 10KHz range Sensitivity: ≧2Vrms (at VΩ, COM) ≧5Arms @45 to 500Hz (at JAW)
DIODE TEST CAPACITANCE Range: 40nF, 400nF, 4μF, 40μF, 100μF Resolution: 0.01nF Accuracy: ±(3.0% rdg + 10dgts)
Accuracy: ±(3.0% rdg + 3dgts) Resolution: 1mV Test current: 0.5±0.3mA Test Voltage: <1.6V
CONTINUITY Threshold: Less than 5Ω
DUTY CYCLE (2Hz to 20KHz) Range: 10% to 90% Accuracy: ±(2% rdg+5dgts) Sensitivity: 2Vrms
CHY FIREMATE CO., LTD. NO.3 SHENG-LI 1ST STREET, HSIN-TIEN VILLAGE, JEN-TE HSIANG, TAINAN HSIEN, TAIWAN R.O.C. TEL: 886-6-2794811 FAX: 886-6-2700227 E-Mail:
[email protected] Ver. 1. 102009
Customer Approved By:
Prepared By: Bruce Hsieh Engineer Manager CHY
