Transcript
AutoCam GPS FHD v2
AutoCam GPS FHD
v2
MANUAL
Please read extra notes that are in the camera box. Please set UMTC+ time after each daylight savings ends and starts in the MENU settings. if you do not do this your time may be out by one hour. Ie Victoria and NSW are +10, but during daylight savings are +11.
1
AutoCam GPS FHD v2
About ............................................................... 3 BSMI Statement ....................................................... 3 FCC Statement ........................................................ 3 CE and RoHS Statement ................................................ 3 1、
Product ......................................................... 4 1.1 Features ...........................................................................................................................................4 1.2 Content ............................................................................................................................................7 1.3 Appearance ......................................................................................................................................8
2、
Installation Guide .............................................. 9 2.1 Installation Instruction .....................................................................................................................9 2.2 Device Installation/Uninstallation .................................................................................................10 2.3 Wiring Suggestion ..........................................................................................................................10 2.4 Power Connection .........................................................................................................................11 2.5 Device ON/OFF ..............................................................................................................................11
3、
Usage Guide .................................................... 12 3.1 Recording .......................................................................................................................................12 3.2 Emergency Recording ....................................................................................................................12 3.3 Snapshot ........................................................................................................................................12 3.4 GPS Positioning and Fixed-Point Speed Cam Alert ........................................................................13 3.5 Self-set Speed Point .......................................................................................................................13 3.6 Instant Driving Info Display ............................................................................................................14 3.7 File Playback Overview ..................................................................................................................14 3.8 Menu / Functions...........................................................................................................................15
4、
Micro SD Card File Access ...................................... 24
5、
DVR Player Installation ........................................ 24 5.1 DVR Player: Installation, Interface and Playback ...........................................................................24
6、
Specification .................................................. 27
2
AutoCam GPS FHD v2
About The content of this manual is for reference only. The producer retains the rights to adjustment without prior notice. We keep working on the accuracy and completeness of our manual. Feel free to contact us if you find anything lacking.
BSMI Statement This product has passed the inspection of Bureau of Standard, Metrology and Inspection, and is accordance with all the relevant current law and regulation; make sure this product will not disturb all the other in-car electronic devices, and can be sold in Taiwan.
FCC Statement In accordance with Part 15 of the FCC Rules, our device has been tested and proven to comply with the limits for a Class B digital device. The limits are set to prevent against harmful interference in a residential installation. Complying with Part 15 of the FCC Rules, our device operation satisfies the following conditions: (1) Device does not cause harmful interference, and (2) must accept any interference received, including such that may cause undesired operation. Our device is FCC approved to cause no interference with other in-car electronics. FCC Caution: Any unauthorized changes or modifications could void the user’s rights to safe and correct operation of the device.
CE and RoHS Statement Our device is CE certified and thus complies with the requirements set forth in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility(2004/108/EC). Restriction of Hazardous Substance(2002/95/EC) is a directive set forth by the European Union concerning the usage of 6 harmful substances including lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ether. The production process of our device complies with RoHS standards.
3
AutoCam GPS FHD v2
1、 Product Thank you for purchasing AutoCam GPS FHD car camera recorder. Our company is dedicated to providing innovative, high quality electronics to our customers. This device functions as a video and audio recorder in the car and on condition that its built-in battery is fully charged, it also supports off-car usage.
1.1 Features ●
Super HD 1296P：2304x1296, high resolution for super clear video quality.
●
HDR1080p：HDR High dynamic exposure imaging technology to display real color.
●
DSP：Ambarella A7L high processing chipset for better efficiency.
●
Image Sensor：New generation low-light CMOS image sensor.
●
Display：2.4” TFT LCD colorful screen for a clear view
●
Smart Scenario Mode：Provide Parking and Landscape Mode to capture your journey.
●
Wide Angle Lens：F1.8 big aperture, 156°(D) flat wide angle for a broader view.
●
All-glass Lens：6G all-glass optical plus IR filter lens. GPS Information：Completely sync and record the driving time, speed, direction and
●
the coordinates. ●
Fixed-point Speed Cam Alert：National fixed-point speed cam data built in, alerting you with voice prompt to avoid speeding. It is available to update your database by internet.
●
Not enabled in Australia or NZ. leave switched OFF.
Add Self-set Speed Cam Position：Supporting manual registration of speed cam point up to 200 entries. Not enabled in Australia or NZ. leave switched OFF.
●
Self-set Speed Limit Alert：Customized speed limit to alert driver when reaches the self-set speed limit.
●
LDWS (Lane Departure Warning System)：Alert is issued when the speed exceeds 70 km/h and diverts from the original lane. Set to OFF.
●
Circular Recording：Customized 3 or 5-mins interval recording to not lose a second.
●
Emergency Recording：To protect important files from being overwritten.
●
Collision Detection：G-Sensor keeps track on gravity info and initiate emergency. Set to OFF 4
AutoCam GPS FHD v2
●
High Temperature Resistance：Parts and lithium battery both passed the high-temperature test to ensure user safety.
●
Built-in High Temperature Resistance Lithium Polymer Battery：Supporting off-car recording when runs into emergency.
●
Compatible with micro SDHC card up to 32GB. 5.5 hours approx record at 1080
●
Exclusive DVR player showing video, map, driving direction and G-sensor data at the same time.
●
CE/FCC/BSMI certified, no interference with in-car devices and GPS.
●
Compliance with RoHS.
Attention Usage Please use Class 10 or above micro SDHC card to avoid image lagging. When setting up the device for the first time, please do not record at the same time. Please use original bracket and accessories for AutoCam GPS FHD. In vehicles which power to the cigarette lighter remains on after the engine has been turned off, please remove the cigarette lighter plug to avoid draining your car battery or other accidents. After the car engine has stopped, the power supply been cut off, or any event that interrupts the power supply occurs, the built-in battery allows continuous recording to the memory card. Do not remove the micro SDHC memory card or the file might be damaged. Do not place the device in direct sunlight when you get off the car. Do not connect the device directly to the power source on the car. A setup this way will render the warranty void. You must use Hardwire Kit from OnSiteCameras only. The device might slightly heat up when used for a long period of time. This phenomenon is normal. Do not disassemble or modify the device. Simply consult the dealer or our customer service center when encountering problem with the device. 5
AutoCam GPS FHD v2
Do not drop or subject the device to blows or force. Do not press hard on the touch screen. This may damage the device or cause it to malfunction. Driving safety should always come first. Please do not operate this device while driving. The current speed, direction, current distance might vary slightly and are for reference only. Please avoid contact with water and make sure both hands are dried when operating the device. Please avoid cleaning the product with cleanser containing strong acid or alkaline. Please follow local regulations when disposing the device and its built-in battery. The driving safety calculation is for reference only. Please drive according to local traffic rules and actual traffic situation. GPS positioning result is for reference only. The accuracy of this function is subject to weather, location and other external factors. Please note that GPS signals cannot go through buildings and window films containing metallic substances. For correct usage, please read the user manual carefully.
Micro SDHC Memory Card 1. Please use at least 8G micro SDHC memory card Class 10 or above supporting up to 32GB. 2. Please format the card via the device before use. ※Please do not insert or extract the memory card while the device is in operation.
6
AutoCam GPS FHD v2
1.2 Content Device
Bracket
Car Charger
manual and GPS mapping software is supplied on USB stick in the box
7
AutoCam GPS FHD v2
1.3 Appearance
No.
Item
No.
Item
1
ON/OFF Key
8
Recording Indicator
2
Memory Card Slot
9
Mini USB port
3
Screen
10
GPS Module
4
Menu/Instant Driving Info/Back
11
Bracket Socket
5
Up Select/Self-set Speed Cam Point/Play
12
Loudspeaker
6
Dn. Select/Pause/Snapshot
13
Lens
7
Recording/Confirm/Emergency Recording/Pause/Play
14
Microphone
8
AutoCam GPS FHD v2
2、 Installation Guide 2.1 Installation Instruction Install your product as close as possible to the rearview mirror in your car to get the best view, as illustrated. To ensure clear recording in rains, please install the device within the range of windshield wipers. Please avoid hindrance of the safety airbag operation. Wipe clean the selected area and the suction cup prior to installation. Do not touch the lens lest the finger grease smudges the lens and thus affects recording quality; use exclusive cloth for cleaning lens with lens whenever necessary. Do not install on colored windshield, which affects recording quality.
Optimal Installation Area
※ Warning Do not install AutoCam products over an air bag cover or within the air bag deployment zone. The company assumes no responsibility or liability for injury or death as a result of car crashes and/or air bag deployment.
9
AutoCam GPS FHD v2
2.2 Device Installation/Uninstallation Installation 1. To attach the bracket to the device, slide the bracket into the bracket slot until a click sound appears. 2. To attach the device on the windshield, put the suction cup onto the windshield and press down the clamp.
3. Make sure the bracket has been firmly installed. To adjust the vertical angle, loosen the top knob; to swivel the device horizontally, unscrew the bottom knob screw. Screw back tightly to secure recording angle.
Uninstallation 1. Device Uninstallation：To disconnect the suction cup and the windshield, pull down the clamp. Make sure the device is securely in your hand in advance. 2. To disconnect the bracket and the device, press on the part on the bracket base that sticks out and push outward while pulling the device inward.
2.3 Wiring Suggestion 1. Take the cigarette charger cable upward and set it along the inside seam of car towards the door of the shotgun seat. 2. Extend the cable to the door-frame strip (front pillar inner side), downward to fix under the mat and into the console. 3. Tuck the extra cable under the mat if applicable. ※Coins or other solid objects could be helpful in fixing the cable to its position. 10
AutoCam GPS FHD v2
2.4 Power Connection 1、Connect the cigarette car charger cable to the micro USB slot on the device. 2、Connect the other side of the cigarette car charger cable to car. ※Red LED light on the device indicates device is under recording; GREEN light indicates device on stand-by mode.
2.5 Device ON/OFF 1. Manual ON：Press
for 1 sec to turn ON the device when the car charger is not
connected. 2. Manual OFF：Press 3. Auto ON/OFF：
for 1 sec to turn off the device.
※ When the car charger is connected and the engine is on, the device will turn on automatically. ※ The device will automatically turn off when the engine is off. ※ Use cigar lighter to activate the engine to automatically turn on the device. When disconnect the charger when charging (disconnect the USB cable), the device will automatically turn off. ※ Auto ON/OFF function is not supported if the cigar lighter keeps charging after the engine turns off.
※Quick Troubleshooting 1. Please check if Micro SD card is correctly inserted. Only use genuine memory cards. 2. See if storage space of memory card is sufficient; or if it is system error. 3. If the failure still can't be removed, it is suggested to format the SD card after processing backup. 11
AutoCam GPS FHD v2
3、 Usage Guide 3.1 Recording to start 1. Recording：Under default mode, press or select recording. Red LED ● and recording time will show on the upper left corner on the screen. 2. Automatic Recording：When automatic recording mode is on, the device will start recording once on. 3. Stop Recording：While recording, press to stop recording. 4. Stop Recording by Shutting Down：Recording will stop and files will be saved upon device shutted down.
3.2
Emergency Recording
1. Press EMERG recording, click on
(only save 10 emerg files before deleting)
button
“Emergency Recording” in red font will show on the upper left corner of the screen Files recorded under emergency recording will not be overwritten by circular recording files. Press
and click on
to stop recording.
2. When collision detection is on, emergency recording will be initiated when collision is detected by the device while it is on. 3. An 8GB memory card saves approximately 10 emergency recording files. 4. When emergency recording file storage is full, “Full storage for emergency files” message will show on the screen when clicking on
and selecting
Emergency Recording during the recording.
3.3 Snapshot In recording mode, click on
and select
12
for taking a snapshot.
AutoCam GPS FHD v2
3.4 GPS Positioning and Fixed-Point Speed Cam Alert not enabled 1. GPS Positioning： Satellite positioning status will show on the upper right corner on the screen, in 3 different signal strength:
and no signal
.
2. Fixed-point Speed Cam Alert： Not supported in Australia or NZ. After the completion of GPS positioning, the device will issue alerts when the car is reaching the fixed-point speed cam as well as show the speed limit and distance on the screen until pass by the speed cam point.
3.5 Self-set Speed Point 1. Self-set Speed Cam Point Alert：Not supported in Australia or NZ. The device will issue an alert when reaches the self-set speed cam point. 2. Quick Add Self-set Speed Point： In default mode, and under the successful GPS positioning status, long press to add up a new self-set speed cam point, and up to 200 entries of maximum.
13
AutoCam GPS FHD v2
3.6 Instant Driving Info Display To get instant feedback of the current driving info when the GPS positioning is complete, click on to view. Click again to exit.
No.
1
3
2
4
Item
No.
Item
○ 1
Current Speed
○ 3
Compass
○ 2
Current Time
○ 4
Current Speed Point
3.7 File Playback Overview Under the default mode, click on
to enter the Playback Menu. Use
to select the file and click on to return to the previous section.
14
for video playing. Click on
AutoCam GPS FHD v2
3.8 Menu / Functions Click on
to select
and enter Menu.
1. File Playback： Under the Menu, select File Playback. Use
and
to select file
Recording、Emergency Recording or Picture. Enter the six-screenshots page and use to select which video to play. Click on play。Click on
and select
to
to return to the previous section.
2. Satellite Status：To check satellite receiving status, including receiving numbers, signal strength and current location. Under Menu, select Satellite Status to view. Click on return to the previous section.
15
and select
to
AutoCam GPS FHD v2
3. Satellite Time Sync：Select satellite time zone sync to the time or manually set up. Under the System Menu, select Time Sync, use zone +14:00~-12:00 or off. Click on
to choose GMT time
to return to the previous section.
4. Date/Time Setting：Set up current time In default mode, select Date/Time. Use
and
to set up and
confirm time and date. Device would automatically return to the previous section after setting up. 5. Time Stamp：To choose if time inserting is needed. Under the Menu, select Time Stamp, use
to select and
to
confirm, select to On or Off. Return to Menu after setting. 6. Resolution：Adjust recording resolution. Under the Menu, select Video Resolution and adjust the resolution of recording. Use
and
select and confirm. Select the available options from
2560X1080 p30、2304X1296 p30、1920X1080 p4 or1920X1080 p30HDR, return to Menu after setting. 1920 HDR recommended 7. EV：Manually adjust exposure value (EV). Under the Menu, select EV and use environment needed and use
to select according to to confirm. Set from +1.3~-1.3, return to
Menu after setting.
16
AutoCam GPS FHD v2
8. Smart Scene Mode：Select different mode under different circumstances as Driving Mode and Scenary Mode. Under the Menu, select Smart Scene Mode, use Driving Mode or Scenery Mode and click on
to choose to confirm, return to Menu
after setting. 9. Driver Fatigue Alert：Driving safety reference function, select ON/OFF to set if a periodic alert is needed to remind driver to take a rest. Under the Menu, select Driver Fatigue Alert, use
to choose and
to confirm.Select On or Off , return to Menu after setting. ※ Once turn on this function, the device alerts every 30 mins after recording over one hour.
Not Recommended to be left On.
17
AutoCam GPS FHD v2
10. Screen Setting：Select if turn on the screen during recording. Under the Menu, select Screen Setting, use
to choose and
to
confirm. Choose to On 、 30secs Off 、 Off after 3mins or Off. Return to Menu after setting. 11. Voice Record：Set if to record voice. Under the Menu, select Voice Record, use
to choose and
to
onfirm On or Off, return to Menu after setting. 12. Sound Setting：Set up the key sound volume. Select Sound Setting, use
to choose and
to confirm. Choose
from 5、4、3、2、1 or off, return to Menu after setting. 13. Speed Cam Alert：Select audio mode speed cam alert mode. Not recommended Under the Menu, select Speed Cam Alert, use
to choose from
Warning Tone Alert、Voice Alert or Off, then click on
to confirm On or Off,
return to Menu after setting. 14. Speed Cam Alert Management：To add or delete self-set speed point. Under the Menu, select Self-set Speed Point Management. Use choose and
to
to confirm. Set up Add Self-set Speed Point or
Delete Self-set Speed Point, return to Menu after setting. leave setting OFF ※Notice：Self-set speed point delete is a full delete function, which is not able to be deleted one by one.
18
AutoCam GPS FHD v2
15. Distance Unit：Select the related setting value and the unit you’d like to show. Under the Menu, select Distance Unit , use
to choose and click
to confirm. Select KM or MILE , return to Menu after setting. 16. Speed Limit Alert：Alert when self-set speed limit margin is reached. Under the Menu, select Speed Limit Alert , use
to choose and click
to confirm. Select 50km/h ~ 200km/h or Off , return to Menu after setting. 17. Automatic Recording：Set up automatic recording when vihecle starts up. Under the Menu, select Automatic Recording, use
to choose and
to confirm On or Off, return to Menu after setting. 18. Recording Interval：Set up the length of every clip. Under the Menu, select Recording Interval, use
to choose and
to confirm. Set up 3mins or 5mins, return to Menu after setting. 19. Motion Detection：Start recording when motion detected. Under the Menu, select Motion Detection, use
to choose and
to confirm On or Off, return to Menu after setting. 20. Collision Detection：Set G-Sensor sensitivity and record as emergency file when collision detected while recording. Under the Menu, select Collision Detection, use
to choose and
to confirm. Set up High Sensitive 、Midium Sensitive、Low Sensitive or Off, return to Menu after setting. 19
AutoCam GPS FHD v2
21. Shut Down Extension：After shutting the engine or removing the car charger, the turning-off time will be extended. Under the Menu, select Shut Down Extension, use
to choose and
to confirm. Set up 10sec or Off for extending shutting down, and return to Menu after setting. 22.WDR (Wide Dynamic Range)：Turn on this function in order to make the image quality more similar with real image. Under the Menu, select WDR，use
to choose and
to confirm.
Return to Menu after setting. 1920 HDR is recommended by OnSiteCameras ※It is only applied under the condition of the resolution is set at 2560X1080 p30、 2304X1296 p30 or 1920X1080 p45
20
AutoCam GPS FHD v2
23. LDWS (Lane Departure Warning System)：Driving safety reference function. Set to turn on the function. This setting is not recommended to be turned on. Under the Menu, select LDWS，use
to choose and
to confirm.
Set up 70km/h~90km/h or Off. Return to Menu after setting. After speed setting, adjust the installation position of the device so that the yellow align the driving lane. It is suggested to install the device behind the review mirror to increase the accuracy. After completing the satellite position, the device will alert driver when driving above the self-set limit from 70km/h~90km/h and straying from the orginal line. Not recommended to be used by OnSiteCameras
21
AutoCam GPS FHD v2
24. Headlight Reminder：Driving safety reference function. Under the Menu, select Headlight Reminder ，use click
to choose and
to confirm. Set up On or Off, return to Menu after setting.
※ When the function is turned on, the device will alert driver during the dim light is detected in recording (e.g., rainy day, night time, basement, parking lot, tunnel… etc).
25. Language Setting：Select the language of operation interface (also support multi-national languages). Under the Menu, select Language Setting, use to confirm. Set up in English.... mode Return to Menu after setting.
22
to choose and
AutoCam GPS FHD v2
26. Delete Files：Select the files to be deleted. Under the Menu, select Delete Files. Use
to choose and
to select regular Video、Emergency or Pictures . Enter the six-shots view section, use
to select files that need to be deleted and click on
to
confirm if delete all or only one file. Return to the previous section after deleting. 27. Format：Format the memory card（Micro SD）. In the default mode, select Format. Use
to choose and
confirm Yes or No. Click on
to format immediately,
and select
to
please noted that all the files will be deleted. Return to Menu after setting. (Please check if there is any important data stored in SD card before format). Click on
and select
return to previous section for cancelation.
28. Default Setting：Reset all the setting to default status. Under Menu, select Default Setting. Use
to choose and
to
confirm Yes or No. The device will immediately reset to default setting if Yes is selected. 29. Version：Display firmwaire version information. Under Menu, select Version and click on info of the device. Select
to confirm to display the version
to return to previous section.
23
AutoCam GPS FHD v2
4、 Micro SD Card File Access 1. Via USB cable you can connect the AutoCam GPS FHD camera to your computer. But it is not recommended, it is far quicker and a better operation if you simply remove the memory card and use the small USB adaptor to watch your videos. 2. Remove the memory card from the device and access it via a card readeron the computer. 3. （Micro SD） Content：Files are stored in “DCIM” in the memory card. Folder “100MEDIA” includes regular recordings, emergency recordings and pictures.
5、 DVR Player Installation MAC not supported 5.1 DVR Player: Installation, Interface and Playback 1. System Requirements： CPU：Intel Core 2 Duo E6600 or AMD Phenom X3 8850 or above RAM：1G or above Operating System：Windows XP or above ※ This player can only be operated under Windows system. 2. Installation： Execute Setup.exe in the CD for installing the DVR player.
24
AutoCam GPS FHD v2
3. Software Interface：
A F
E B
G D
C
H No.
Item
A
Window Form and File Location
B
Video Display Area
C
G-Sensor
D
Compass; Speedometer
Display driving direction, speed, and location.
E
All/One Key
F
GPS Display
G
Click ALL and so all the file displays will be linked. Click on Google Key and link to www.cardvrmap.com for downloading free Goggle Map API. The tracking route will then be shown on the map (dotted line will be showed instead if there was no GPS signals, e.g. tunnel). Display all the file information list.
File List Video Operation and Window Control video and other window’s open and close. open/close
H
Function Combine/separate the display window and the file location. Display current video Display G-sensor info of the current video. Can be dragged by mouse to the video location which is about to be played.
25
AutoCam GPS FHD v2
4. GPS Link Display Instruction：
F F
Click on
F
to open the link www.cardvrmap.com and download Google Map API
for free. GPS display area will then show in the player after download. You are able to move and zoom in/out in the player. ※Please check internet connection for Google Map display. ※To see both the recording and the GPS info, the video files (MOV) and the GPS/G-Sensor info file (NMEA) must remain in the same folder.
26
AutoCam GPS FHD v2
6、 Specification AutoCam GPS FHDv2 Truck/Car Camera Recorder Display
2.4” TFT capacitive color screen
Image Sensor
New generation low-light CMOS
DSP
U.S.A Ambarella A7L high speed processor
GPS Module
Built-in duo satellite receiving module
Lens
156°(D) flat wide angle，6G all-glass with IR filter
Aperture
F/1.8
Resolution
2560X1080(30fps) / 2304X1296(30fps) 1920×1080 (45fps) / HDR1920×1080 (30fps)
Format/Compression
MOV / H.264
Duration
Set recording duration at 3mins or 5mins Car cigarette charger
Power Supply
(INPUT：12V~24V；OUTPUT：DC5V/1A) Built-in high temperature resistant lithium polymer battery
External Memory
Micro SD Card (8GB-32GB)，SDHC Class 10 or above
LED Indicator
Green：On；Red：Recording
Operation Temperature 0℃~50℃ Storage Temperature International Certifications
-20℃~80℃ BSMI / CE / FCC / RoHS
Dimensions
70 x 63.5 x 27mm
Weight
~95g approx
※OnsiteCameras works to ensure the accuracy and completeness of our user manual. Please kindly advise customer service should there be any mistake or point missing. All specifications are subject to changes. OnsiteCameras reserves the right to modify the specification without prior notice to customer. 27
