Autodesk Quantity Takeoff 2013 - System Requirements

Transcript

Autodesk® Quantity Takeoff 2012 System Requirements (32-bit & 64-bit) Whether your Windows operating system is the 32-bit or the 64-bit version, the version is automatically detected during installation. The appropriate version of Quantity Takeoff is installed. A single deployment cannot target both Microsoft Windows 32 and Microsoft Windows 64 operating system architectures. To target both architectures, two separate deployments must be created. This selection can be made in the Deployment Creation dialog. Operating System    Microsoft® Windows XP Professional Microsoft® Windows Vista® Microsoft® Windows 7 It is recommended that non-English language versions of Autodesk Quantity Takeoff be installed on an operating system with a user interface language that matches the code page of the Autodesk Quantity Takeoff language. A code page provides support for character sets used in different languages. See the Windows Vista versions section of the Microsoft website. Web Browser  Microsoft® Internet Explorer® 7.0 or higher Processor    Intel® Pentium® IV processor, 800 MHz 32-bit (x86) or 64-bit (x64) processor (or faster) Multiple processors supported Dual core supported Memory (RAM)   2 GB (minimum) 4 GB (recommended) Hard Disk  550MB free space Display Resolution  1024 x 768 True Color (minimum) Display Card   128 MB Video Adaptor Card (minimum) 256 MB or greater, Direct 3D compatible 3D Video Adaptor Card (recommended) Pointing Device  Mouse, trackball or compatible pointing device DVD  Any speed (for installation only) Optional Hardware    Printer or plotter Internet access Network interface card Autodesk is a registered trademark of Autodesk, Inc., and/or its subsidiaries and affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.