Preview only show first 10 pages with watermark. For full document please download

Automatic Switch-mode Battery Charger

   EMBED

Share

Transcript

EPS 2425 Automatic Switch-Mode Battery Charger GENERAL FEATURES ! Twin battery charger ! Fitted with boost phase time-out timer to avoid excessive battery gassing ideal ! Overheating and short circuit protection ! IUOU charging characteristic with time limited UO Phase ! Fan ventilation ! LED charging display ! For motor homes, on sailing yachts, ambulance, and emergency vehicles INPUT Input Frequency Protection Isolation Safety EMI-EMC Standard Input Connection MECHANICAL Case Dimension Casing Material Weight Cooling Warranty 207-253V 50-60Hz Internal Primary Input-Output 3000VAC Input-Case 2500 VAC Output-Case 500 VAC Designed to IEC 950 FCC Class B, CE, C-Tick AS 3193 3 Core SAA Cable IEC 325L X 230W X 102H Extruded Anodized Aluminum 5.05 kg. Fan cooled 12 Months ELECTRICAL Topology Efficiency Boost Charge Voltage Float Charge Voltage Output Charge Current Ripple & Noise Line Regulation Load regulation Rise Time Hold-up Time Short Circuit Protection Over Current Protection Reverse Polarity Protection Switching DC Power 90% 28.8VDC 27.6VDC 25 Amps 150 mV +/- 0.5% Over Input Range +/- 1% 0-100% Load 500 mS 20 mS@Nominal Output Output Shutdown Secondary Current Limited Internal Fuse ENVIRONMENTAL Operating Temp. Range Storage Temperature Relative Humidity Altitude -5O to 50OC -30OC to +85OC 10% to 90% 0-3000m INVENSYS ENERGY SYSTEMS PTY LTD Melb (03) 9590 0555 , Syd (02) 9878 5000, Perth (08) 9240 4666, Brisb (07) 3217 2090