Transcript
BELT AND HARNESS Protective Carrying Technology www.kata-bags.com
AUXILIARY POUCH SYSTEM The Auxiliary Pouch System will allow you to comfortably store and easily access all your lenses, flash and camera bodies. This modular system lets you carry as many or as little pouches either on the belt or with the added harness for extra support. You can connect up to 6 pouches recommended anywhere on your belt for various carrying possibilities. Pouches for full size DSLR bodies, professional flash, and many different sizes of lenses are available for purchase separately to match your kit.
Features: • Signature TST protection protects your gear within the pouches. • Adjustable belt and harness for ultimate comfort. • Padded removable insert for most pouches for extra protection and space when needed. • Overlapping belt closure for securing on belt. • Exterior and interior pockets for storing lens caps, filters and other accessories.
The Auxiliary Pouch System gives you the option to either purchase the AB-302 full harness which includes both the belt as well as the shoulder harness, or to purchase the AB-301 belt to be used individually. To properly adjust the belt: 1. Start by quickly trying on the belt and buckling. You may find that you need to lengthen or shorten.
AB-301 Belt with Pouches
AB-302 Full harness with pouches
2. If no adjustment is needed, simply clip the main front buckle and tighten by pulling the ends of the strap to your sides. (see fig. 1) 3. To adjust the length of the belt, take the belt off and open each end of the inside of the belt. You can now adjust each end using the hook and loop to match your needed waist size. Widening the belt will reveal an extra pouch connection,( provided you are able to wear the belt wide comfortably). (see fig. 2)
fig. 1
4. Close the inside large hook and loop connection on the inside of the belt. To properly adjust and install the shoulder harness:
fig. 2
5. Follow the steps above first to adjust the belt. 6. The harness has an adjustable rear connection as well as two frontal connections with 2 different buckle options.
Name: AB-301 Order code: KT AB-301 AB-301 Minimum girth Maximum girth Width Weight
Dimensions 86 cm 33.9” 160 cm 63” 9.5 cm 3.75” 0.28 kg 0.62 lbs.
Name: AB-302 Order code: KT AB-302 AB-302 Minimum girth Maximum girth Width Weight
Dimensions 86 cm 33.9” 160 cm 63” 9.5 cm 3.75” 0.28 kg 0.62 lbs.
*Dimensions measures belt only on each
7. Put on the belt and shoulder harness, making sure that the rear connection is attached and the two frontal connections are attached with the corresponding buckle, either with the two front or the two D-rings.
fig. 3.
If the height of the harness needs adjustment, take off and adjust the back hook and loop connection to the desired length. (see fig. 3)
fig. 4
8. Put the harness back on. You can clip the front two attachment buckles to either the inside or outside D-rings according to your comfort. (see fig. 4) 9. Pull the excess straps of the shoulder harness to tighten comfortably on your body. (see fig.5)
fig. 5
POUCHES
POUCH ATTACHMENT
fig.6
To properly attach pouches to the belt:
The Auxiliary Pouches fit a variety of lenses flashes and camera bodies while keeping them protected and easy to access at all times. All the pouches easily attach to the auxiliary belt by the secure locking loop on the back of the pouch. Each pouch comes with a provided shoulder strap to allow you to carry separately when needed.
1. Start by opening the hook and loop fold at the bottom of the pouch and unlooping the flap completely.(see fig.7)
AP-321 with shoulder strap
Removable insert
The removable padded insert protects your lens and when unneeded, you can take it out to make the pouch flat or to make extra room for a slightly larger lens. (see fig. 6)
2. Choose which loop on the belt you prefer to hold the pouch and run the flap through the loop.(see fig. 8)
fig.7
3. Pull the pouch down so the belt loop is sitting closest to the top of the pouch. fig. 8
4. You can now run the flap back through the middle strap on the pouch. (see fig. 9)
Special non slip side zippers allow you to expand and contract the pouch in order to make it fit your lens with hood attached or to accommodate a larger lens
5. Securely connect back the hook and loop fold on the bottom of the pouch. Unzip to expand
lens hood attached
POUCH GUIDE:
fig.9
Name:AP-325 Order code: KT AP-325
An external zippered pocket will keep flat accessories you want close at hand.
THERMO SHIELD
AP-325
SHOULDER STRAP
Name:AP-321 Order code: KT AP-321 An internal mesh pocket will hold additional accessories such as batteries and lens caps.
AP-321 Length Width Height
External zippered pocket
Internal mesh pocket
External Max. Size 7.5” 4.7” 7.9”
Weight
19 cm 12 cm 20 cm 0.6 Lbs
Internal Main Compartment 6.3” 16 cm 3.5” 9 cm 6.3” 16 cm 0.27 Kg
Length Width Height
Name:AP-322 Order code: KT AP-322 AP-322
External Max. Size
Length
4.3” 2.8” 10.6”
Width
1. Find vertical connection strap and loop through preferred connection on bag. 2. Loop flap on back of pouch through vertical connection strap making sure to close on bottom firmly.
Height Weight
1.8” 4.5 cm 3.5” 9 cm 9.1” 23 cm 0.14 Kg
Name:AP-323 Order code: KT AP-323 Attach strap through loop on bag
Attach pouch using back flap
AP-323
External Max. Size
Length
4.3” 4.7” 10.6”
Width Height Weight
When shooting you have the option to easily open and close the pouch with just the buckle. Detach the small tab on the inside of the lid and fold larger flap so it attaches with the hook and loop close to the buckle. The hook and loop now does not attach when closing the lid.
11 cm 7 cm 27 cm 0.3 Lbs
Internal Main Compartment
11 cm 12 cm 27 cm 0.6 Lbs
Internal Main Compartment 3.3” 8.5 cm 3.3” 8.5 cm 7.9” 20 cm 0.27 Kg
Name:AP-324 Order code: KT AP-324 AP-324
External Max. Size
Length
3.9” 4.3” 10.6”
Width Height
Detach small tab
Fold and attach larger flap
Weight
10 cm 11 cm 27 cm 0.5 Lbs
Internal Main Compartment 2.8” 7 cm 2.8” 7 cm 8.7” 22 cm 0.22 Kg
4.3” 3.5” 7.5”
Weight
11 cm 9 cm 19 cm 0.4 Lbs
Internal Main Compartment 2.2” 5.5 cm 2.6” 6.5 cm 5.1” 13 cm 0.17 Kg
Name:AP-326 Order code: KT AP-326 AP-326 Length
To attach pouch to vertical loops on any compatible Kata backpack:
External Max. Size
Width Height Weight
External Max. Size 4.3” 3.5” 7.5”
11 cm 9 cm 19 cm 0.4 Lbs
Internal Main Compartment 2.2” 5.5 cm 2.6” 6.5 cm 5.1” 13 cm 0.17 Kg
Extend your warranty Five Year Warranty: Kata warrants each product to be free of defects in material and workmanship for a period of 5 years from the date of purchase. Lifetime Warranty Extension: By registering your product online with kata, for a limited period we offer lifetime service. For free extended warranty please visit our web site and register your product: www.kata-bags.com DEVELOPMENT AND PRODUCTION by KATA . P.O.B 45078 Jerusalem, 91450 Israel Tel: 972-2-5911000 Fax: 972-2-5400504 e-mail:
[email protected] or
[email protected]
Made in Israel
PK220209
